Error Code 4200

Lately, when I try to burn a disc froma playlist, it barely burns a sliver and then it says: "Unable to burn disc, an unknown error occured [4200]". I've seen this problem all over the internet and none of the given solutions have worked. I tried to reinstall my disk drives and IDE channels, and instead, error 4200 occured. I tried closing all applications besides itunes and I even disconnected my iPod. HERE ARE MY DISK DRIVES:
_NEC DVD+RW ND-2100AD
SAMSUNG CD-R/RW SW-252S
And here is my IDE channel:
Intel(R) 82801EB Ultra ATA Storage Controllers
I don't know if they will help. I don't know why it isn't working! Please if you can do anything at all please post ideas and I will gladley try it! Thank-you!

Code 4200 if I remeber right denotes the drive is resetting while iits burning, usually due to some hardware or software conflict. Try updating the DVD ROM Drive.
If the burner came with the PC when you bought it, goto the PC makers site to find any firmware updates they offer for your model. Also download any updates they offer Like BIOS updates and stuff
If you installed it after buying the PC, goto the DVD ROMs makers site for updates.

Similar Messages

Cb burn - Error Code 4200

I have a tsstcorp cd-r/rw ts-h292a cd-R/RW. I am getting error code 4200 when trying to burn a cd. Any ideas?
Windows XP

Hi himandeme,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having burning a CD on your PC:
iTunes for Windows: Updating the firmware on your CD or DVD drive
http://support.apple.com/kb/HT3206
Cheers,
- Judy

Burn error message 4200?

Ok, so not a new question as there are several posts similar to mine. I have been getting the following error message:
Attempt to burn disk failed. Unknown error occurred. (4200)
This error i got when trying to burn a disk immediately burning another disk. The first disk burned no problem. Tried to burn the next cd and it failed. Help??
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Hewlett-Packard HP Pavilion dv1000 (EH438UA#ABA)
iTunes 9.1.1.12
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.1.3
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.1.2 (214.3)
iTunes Serial Number 95C43F12B3B76AF6
Current user is an administrator.
The current local date and time is 2010-06-04 16:32:03.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 01322ffe14b12e55bd115611271d245f
iPodService 9.1.1.12 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.0.1.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {D2D7B34F-E0B6-4C0D-A2DC-D1E2258DF729}
Description: Broadcom 802.11b/g WLAN - Packet Scheduler Miniport
IP Address: 192.168.1.9
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Fri Jun 04 16:09:52 2010
Lease Expires: Fri Jun 04 17:09:52 2010
DNS Servers: 192.168.1.254
192.168.1.254
Adapter Name: {33FA1701-D833-4E06-A0B4-F77406C661C4}
Description: Realtek RTL8139/810x Family Fast Ethernet NIC - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 68.87.74.32
Lease Obtained: Thu Feb 15 19:51:53 2007
Lease Expires: Mon Jan 18 22:14:07 2038
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-06-04 11:23:47.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (8.0.0.212),
UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.2.0.1),
D: HL-DT-ST DVD-RW GWA-4082N, Rev CC15
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4200(0x00001068). It happened on drive D: HL-DT-ST DVD-RW GWA-4082N on CDR media at speed 24X.

I'm in the same issue and haven't been able to find a suitable solution either.

TS2753 we could not complete your iTunes store request. An unknown error occurred (4200)

When I sync the iphone 4s after updating the apps on the download section, I get the error code : we could not complete your iTunes store request. An unknown error occurred (4200).
iTunes updates the phone as far as I know, but clearly there is some sort of error or fault. I have looked for code elsewhere and googled it too without success.
Anyone else come across the same problem?
Thanks

It was just an outage for the store. Happened earlier today and was back up and working within 10 minutes.

Error code on burning

I often have an error code (is periodic - say 60%) when burning a CD from iTunes when at the end of a burn the program stalls and after about 2 or 3 minutes iTunes says cancelling burn .... then a pop up appears saying burn failed - unknown error (4200).
The disc ejects.
I have noticed in most cases when reinserting the disc, it is recognised and the tracks are listed and plays, so no error has actually occured and the CD works OK.
Sometimes the burn fails before or just after the burn commences... as this does not happen all the time, any ideas on what may have caused this error.

This is happening to me as well. But I'm pretty sure it is because I burned too many CDs at once. Before, using iTunes, I could burn 50 CDs in a day, non-stop. But once I started using iTunes 7, it has stopped working.
I'm not sure if it's iTunes or my CD Burner, but I constantly get errors 4000 and 4280 when using iTunes, and any CDs I try to burn using Nero will not work either.

Disk warrior won't work – error 2153, 4200

Hi,
I have a g5 dual core 2.0g with 2 drives installed in it, lately I have not been able to use disk warrior on my primary drive. I find this confusing since disk warrior used to work fine for this drive.
Here are the problems that I'm encountering:
1) I can't boot from the disk warrior cd, my computer hangs at the 1st grey apple screen with the fan spinning at full tilt and nothing happening for at least 10 mins. Additionally, there are some odd graphics artifacts on the startup screen.
2) Once I've booted up in my secondary drive, I can't use disk warrior to repair my startup drive, I get an error message that says the disk is still in use, and give the error code 2153, 4200.
I have preformed the standard suite of permission repairs, and I'm wondering if anyone else has had this problem.
Cheers
G5 Dual 2.0g Mac OS X (10.4.3) macbook pro 2.0g

All right, I figured this on out on my own.
It appears that retrospect was running at all times regards of which internal disk I was using, so I could never unmount the volume I was trying to fix – hence the disk warrior errors 2153, 4200.
On the advice of this thread http://discussions.apple.com/thread.jspa?messageID=744865 I opened terminal and typed ] /bin/ps auxww and found two process related to retrospect running from the other volume. Once I killed these, disk warrior worked like a charm.
G5 Dual 2.0g Mac OS X (10.4.3) macbook pro 2.0g

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

Error Code 4200

Similar Messages

Maybe you are looking for