Error code (-42110) has come up when I started iTunes what does this mean
error code (-42110) has come up when I started iTunes what does this mean
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes
Similar Messages
-
Error code 0x80020000 while trying to burn a disc? What does this mean?
error code 0x80020000 while trying to burn a disc? What does this mean?
Take a look under 'More like this' to the right on this page.
-
My USBs ports are charging all devices like my iPod and my back-up external Hard Drive but the Mac does not recognise any of them.
The Hardware Test showed the following error: 4SNS/1/40000000:Th 1H-81.000.
What does this mean?
Thanks!Thanks for the prompt reply Kappy...
Does this mean I have to hand in my Mac for repair or is there a way to solve it independently?
Cheers! -
I have an error message ox61011bed on my hp photosmart plus b209a-m. what does this mean?
i have an error message ox61011bed on my hp photosmart plus b209a-m. what does this mean?
The printer was working fine last night but this morning does not want to print.Please try turning your printer Off ant then On,
If the power button is not responding, remove and replug the power cord.
The ox61011bed error code indicates a carriage stall error, if the same error appears after power cycling your device, follow the steps provided below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01768897&cc=us&dlc=en&lc=en&product=3777182&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
A file folder with a question mark Appears on my screen when turning on. What does this mean and how do I fix it?
There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(66745) -
When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?
Hello Julia,
Start with this article.
http://support.apple.com/kb/ts1567
B-rock -
Whenever I plug my iPod in the computer is comes up with this ..This iPod cannot be used because the Apple Mobile Device Service is not started. - what does this mean, how can i fix it?
Instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Or Mac > iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X -
I plugged my 4th generation iPod touch into my computer and when iTunes popped up, there was a notice that read, "The iPod cannot be used because the Apple Mobile Device is not started". What does this mean and what do I do?
Type "Apple Mobile Device Service" into the search bar at the top of the page by Support and read the help article.
-
Received Non-Fatal Error 5904: LV 7 during use of Labview application. What does this mean?
'Non-Fatal Error 5904'. LabView 7 application. 'Source: Comm Analyzer - CP Analog - Adjust Input Level.vi:CP RX Audio Muting.vi' (MRTE 3.0 - Anritsu CDMA Test System)
What does this mean?
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.comXaq,
Here is the comment that was passed about the error source: Comm Analyzer - CP Analog - Adjust Input Level.vi:CP RX Audio Muting.vi
The application has been working fine for about 12 years, it continues to serve its purpose and the RF test equipment rack components are now obsoleted by newer models but it's still in weekly use and is kept calibrated annually but on occasion it unexpectedly throws an error like this while I'm using the test rack during a wireless RF parametrics test and it leaves me wondering if the root cause is the device under test or the test rack. That's why I was hoping to find a detailed description about the error code.
/Bruce
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com -
When I tried to sync my iphone 4 and ipad in iturnes, an error message popped up saying this device cannot be used because Apple Mobile Device service is not started! What does that mean and how do I start service? I've had these devices for over a year and update and sync regularly and have never seen this message before!
I got that message yesterday. I'm new at this so don't know if this is the correct solution but it worked for me. I reset my iPod by holding the 2 buttons down until the apple appears AND I restarted my computer. After that everything worked.
-
I got error code 8387 when downloading music today. what does this mean? how do i get my music?
what does error code 8387 mean? how do i get my music??
Hello swest77,
Great troubleshooting so far. If your issue persists, the following article outlines how to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks,
Matt M. -
Error message - "[app] couldn't be moved to applications." What does this mean and how do I fix it?
When I tried to update "Uberstrike" in Mac App store, I received the error that it couldn't be moved to applications. How do I fix this?
Install the v10.6.7 combo update. It includes MAS bug fixes that may help.
http://support.apple.com/kb/DL1361
It's ok to do this even if you are already running v10.6.7.
Restart your Mac after the combo is installed, then try updating the app. -
I get a pause sign or a play arrow when I logon. What does this mean
When I sign back in to my Imac after it has been asleep, I get my logon picturee and I also get a pause sign or a play arrow. What is this?
Is this with OSX 10.7? If it is, then I will ask your post be moved to that forum since you posted this in the iMac (PPC) forum and no PPC can run 10.7.
-
Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??
I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
On my wife's computer, when she tries to launch Firefox in order to connect to the internet, a window pops up that says "Error launching browser window: no XBL binding for the browser. How do I fix this? I am not very computer literate so please don't use too much computer lingo. Thanks for your help.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Maybe you are looking for
-
well, too many things have been happening that i finally decided to return my yoga for a replacement before my 30 days was up. kept hoping the glitches would be just random occurances, but it's looking more like the unit is a lemon, or at least I hop
-
Thread issue when delete socket
I've got a new problem: when I try to close the socket by deleting it, a thread marshalling issue has appeared: void MainPage::PutOutFire() if (CoreApplication::Properties->HasKey("client")) // Remove the socket from the list of application propertie
-
Tasks in mail/ical in exchange.
We have started to assign tasks to other people in the office using the tasks in exchange. What I see on my mac side is the task e-mail showing up in mail, and nothing in iCal. Is there some work around for fix for this to have those show up in iCal
-
Setting an email account other than Mail as the default
I do not use Mail or Entourage (or have a .mac account), and I wonder if there's a way to set my own email account as the default for saving a photo directly to an email message. Right now my workaround is very complicated. Thanks.
-
How to view pix in my ipod using itunes
how can i view pictures stored in my ipod using itunes