Error code -42404 after the 10.4.1 update

Anyone getting the error code -42404 after installing the 10.4.1 update? It appears when I open the itunes store, and tells me to restore my ipod to original settings. I've tried reinstalling and I still get the error. I'm running windows 7 64-bit.

Yes I have 10.5.1.42 and Win7 x64 and have just started getting the same error when iTunes starts up today - although I think iTunes has not updated for a while?
I have just restored my iPhone 4S to a 3GS backup this morning, and now I see this error and am unable to sync with the iPhone - I was able to do this last week.
Have reinstalled iTunes as it suggests but this has not fixed it.
Help!!!

Similar Messages

Error code: sec_error_untrusted_issuer, after i add the exception, get the certificate i get a blank page with big letters NOT FOUND.

www.google.com uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
The certificate is only valid for 78-159-121-201.local
(Error code: sec_error_untrusted_issuer)
After i add an exception for the site, i get this:
Certificate Status:
This site attempts to identif itself with invalid information.
Wrong site:
Certificate belongs to a diffrent site, which could indicate an identity theft.
Unknown Identity
Certificate is not trusted, because it hasn't been verified by a recognized authority.
And then a blank page with big letters "Not Found"
== URL of affected sites ==
http://google.com , www.youtube.com , www.omegle.com , www.lockerz.com

Do NOT add a security exception: someone is tampering with your internet connection!
When you ask to connect to these sites using https, Firefox gets a certificate from the website which responds. Anyone can make a certificate, but to be valid the certificate must be signed by an organization which Firefox trusts.
The person responding provided a certificate with its response which which was not signed by anybody, so Firefox doesn't know who sent the response, and neither do you.
In short: you asked to talk to google and google did NOT send the response.
As this is happening for several different websites, the attacker is probably on the network between your computer and the internet. Ask the people you get your internet connection for help: they may have had their computers hacked, may discover that the problem exists further along in the network, or they may even be responsible themselves.

Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

ITunes Latest version error code (-42404)

I have the latest version of iTunes since today (12/8/2012) and It has an error code (-42404). I already tryed re-installing and repairing it. It says I have some missing files. I tried contacting apple and they are no help to me at all. When I connect my Apple device it shoes as iPod, iPhone, iPad, etc (Depending on what Apple product it is) and when ever I click on it, it says I must restore it. Its not my iPod, it's iTunes! Please tell me what to do!

Did you ever solve this problem? I have a similar problem. I updated Itunes and now I get 42404 about a missing Itunes component. Have reinstalled Itunes. Doesn't help.
I think (not sure) this is contributing to a sync problem with my Iphone. There I'm getting a message that my sync session failed to start. Restored phone to factory settings. Nothing changed.
Thank you for any hel you can give me.

Missing a required component of Itunes error code 42404

I just downloaded the newest iTunes and got this error, uninstalled and reinstalled but same error. What does error code 42404 mean

See Troubleshooting issues with iTunes for Windows updates.
tt2

How do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

how do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

Hello drews,
To try and resolve the 6A00 error, we will want to ensure that no paper jams or obstructions exist in the printer. To do this, please follow the steps below:
ASF / Paper Output Slot
Turn off the printer.
Remove paper from the ASF.
Gently pull the jammed paper out.
If paper is visible from the ASF, use both hands to pull the paper out slowly.
If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
If the paper tears and a piece of that remains inside the printer, open the scanning unit (printer cover) and remove the paper from inside the printer.
Note : Be careful not to touch the components inside the printer.
Turn on the printer and confirm that the Alarm light is off.
(If the jammed paper remains in the printer, the paper may be automatically ejected.)
Load paper back into the ASF.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Paper jams inside the printer
Turn off the printer and disconnect the power cord and USB cable.
Remove the jammed paper slowly using the following procedure.
Open the rear cover to check if the paper is jammed.
Pull out the cassette and check if the paper is jammed inside the cassette area.
Stand the printer with the rear side down, holding the document cover.
Press the tabs together and pull the green cover toward you.
Check if the paper is jammed.
(If you were not doing Duplex printing, you do not have to follow this procedure.)
Close the green cover and place the printer back to a normal position.
Reconnect the power cord and power on the printer. Confirm the Alarm light is off.
Load paper back into the ASF or cassette.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Clearing credit card-sized paper jammed inside the printer
Credit card-sized and 4" x 6" sized paper must be loaded properly. If this media is not loaded properly, it will feed into the printer and will not exit. Credit card-sized paper should only be loaded in the ASF and in portrait orientation. 4" x 6" sized paper can be loaded in the ASF or cassette. But must be loaded portrait orientation.
If credit card-sized paper was loaded in landscape orientation in the ASF and did not eject (exit), please follow this procedure.
Turn off the printer.
Load the same paper type that is jammed inside the printer in portrait orientation.
Power on the printer.
The paper stock in the ASF will automatically feed the jammed paper from the printer.
To resume printing, load the paper in portrait orientation.
If 4" x 6" sized paper was loaded in landscape orientation in the cassette and did not eject (exit), please follow this procedure.
Turn off the printer.
Open the rear cover.
Fold in four a piece of letter-sized plain paper.
Push in the folded paper until it hits the jammed paper.
If the jammed paper is visible from inside the printer area, pull it out and proceed to step 7.
If the jammed paper cannot be pulled out, push in the folder paper from the rear so the jammed paper is in between the feed rollers.
Pull out the folded paper and close the rear cover.
Power on the printer and confirm that the Alarm light is off. The jammed paper should automatically eject.
To resume printing, load the paper in portrait orientation.
If you still experience the same error after performing the steps above, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, unfortunately, the printer will require servicing to resolve the issue. Please click on the Contact Us link below to obtain your servicing options.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

WSRP: Relative URL results in error code 404 in the consumer access.log

Hello everyone,
I deployed a JSF portlet(implemented in facelets) in Weblogic Server 10.3.2 (11g) [extended to support WSRP]. When the JSF portlet is consumed from a 'consumer' portal [Weblogic 10.3.2 portal], WSRP URL Rewrite results in error code 404 in the consumer portal access.log if the relative path (contextPath+resourcePath) of the javaScript resource is provided.
However, when the absolute path (protocol + serverName + port+ contextPath) of the JavaScript resource is provided, it works correctly:
works:
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
Failed:
<script type="text/javascript" src="#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
Any idea on what is causing the incorrect URL Rewrite?
The .xhtml and the portlet wsdl are listed below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:rich="http://richfaces.org/rich"
xmlns:nchic="http://www.saic.com/nchicago/jsf">
<ui:composition template="/WEB-INF/facelets/templates/page-protected.xhtml">
<head>
<title>not used</title>
<ui:define name="title">#{msgs.searchPageTitle}</ui:define>
<ui:define name="head">
<f:verbatim>
<style type="text/css">
#patientSearchContainer .pageCentered {
width: 800px;
#patientSearchFormInstructions {
padding: 10px 0px 10px 0px;
font-weight: bold;
font-size: 11px;
text-align: left;
.s-form-label {
width: 250px;
.s-form-input {
width: 450px;
</style>
</f:verbatim>
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
</ui:define>
</head>
<body >
<ui:define name="body" >
<h:panelGroup id="patientSearchContainer"
layout="block"
style="text-align: center;">
<rich:panel id="patientSearchPanel"
styleClass="pageCentered"
header="#{msgs.searchPanelSearchTitle}">
<h:panelGroup id="patientSearchFormInstructions" layout="block">
<h:outputText value="#{msgs.searchInstructions}" />
<ul>
<li><h:outputText value="#{msgs.searchInstructions1}" /></li>
<li><h:outputText value="#{msgs.searchInstructions2}" /></li>
<li><h:outputText value="#{msgs.searchInstructions3}" /></li>
</ul>
</h:panelGroup>
<h:panelGroup id="errorPanel"
layout="block"
rendered="#{searchForm.hasMessages}">
<h:panelGroup layout="block"
style="padding: 5px;">
<h:outputFormat value="#{msgs.errorMultipleMessage}"
rendered="#{searchForm.errorCount > 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:outputFormat value="#{msgs.errorSingleMessage}"
rendered="#{searchForm.errorCount == 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:messages layout="list"
showSummary="false"
showDetail="true"
errorClass="errors"
styleClass="errorsList" />
</h:panelGroup>
</h:panelGroup>
<h:form id="patientSearchForm" prependId="false">
<h:panelGrid columns="2"
columnClasses="s-form-label,s-form-input"
summary="#{msgs.tableSummary}">
<nchic:label for="queryIdType"
value="#{msgs.labelIdType}"
required="false" />
<h:selectOneMenu id="queryIdType"
value="#{searchForm.criteria.identificationType}"
converter="patient.IdentificationType"
tabindex="2"
styleClass="masked-hidden not-required">
<f:selectItems value="#{searchForm.lists.allIdTypes}" />
<a4j:support event="onchange"
reRender="sponsorSearch,queryIdNumber"
oncomplete="JointReg.searchForm.patientIdTypeUpdateComplete();"
onsubmit="JointReg.searchForm.patientIdTypeUpdateSubmit();"
actionListener="#{searchForm.identificationTypeChangeListener}" />
</h:selectOneMenu>
<nchic:label for="sponsorSearch"
value="#{msgs.labelIdNumberRadios}"
required="false" />
<h:selectOneMenu id="sponsorSearch"
value="#{searchForm.criteria.sponsorSearch}"
tabindex="3"
disabled="#{searchForm.identificationDisabled}"
styleClass="masked-hidden not-required">
<f:selectItem itemValue="true" itemLabel="#{msgs.labelSponsor}" />
<f:selectItem itemValue="false" itemLabel="#{msgs.labelPatient}" />
</h:selectOneMenu>
<nchic:label for="queryIdNumber"
value="#{msgs.labelIdNumber}"
required="false" />
<h:inputText id="queryIdNumber"
converter="patient.IdentificationNumber"
value="#{searchForm.criteria.identificationNumber}"
tabindex="4"
styleClass="not-required resettable"
disabled="#{searchForm.identificationDisabled}"
maxlength="11" />
<nchic:label for="queryBirthDate"
value="#{msgs.labelBirthDateShort}"
required="false" />
<nchic:date id="queryBirthDate"
value="#{searchForm.criteria.birthDate}"
monthValues="#{searchForm.lists.allMonths}"
dayValues="#{searchForm.lists.allDays}"
yearValues="#{searchForm.lists.allYears}"
tabindex="5"
styleClass="masked-hidden not-required resettable" />
<nchic:label for="queryLastName"
value="#{msgs.labelLastName}"
required="false" />
<h:inputText id="queryLastName"
value="#{searchForm.criteria.lastName}"
tabindex="8"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryFirstName"
value="#{msgs.labelFirstName}"
required="false" />
<h:inputText id="queryFirstName"
value="#{searchForm.criteria.firstName}"
tabindex="9"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryGender"
value="#{msgs.labelGender}"
required="false" />
<h:selectOneMenu id="queryGender"
value="#{searchForm.criteria.gender}"
converter="patient.Gender"
tabindex="10"
styleClass="masked-hidden not-required resettable">
<f:selectItems value="#{searchForm.lists.allGenderTypes}" />
</h:selectOneMenu>
</h:panelGrid>
<h:panelGroup layout="block" style="text-align: center">
<h:panelGroup layout="block"
style="padding-top: 15px; margin-left: auto; margin-right: auto;">
<h:commandButton action="#{searchForm.searchAction}"
value="#{msgs.buttonSearch}"
styleClass="s-button"
tabindex="11"
onclick="jQuery(document.body).mask('Searching...');" />
<rich:spacer width="10" />
<h:commandButton type="button"
styleClass="s-button"
onclick="return JointReg.searchForm.resetSearchForm();"
tabindex="12"
value="#{msgs.buttonClearSearch}" />
<rich:spacer width="100" />
<h:commandButton action="#{searchForm.createJohnDoeAction}"
styleClass="s-button"
onclick="jQuery(document.body).mask('Registering...');"
tabindex="13"
value="#{msgs.buttonJohnDoe}" />
</h:panelGroup>
</h:panelGroup>
</h:form>
</rich:panel>
</h:panelGroup>
</ui:define>
</body>
</ui:composition>
</html>
WSDL:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <s0:definitions xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:s2="urn:oasis:names:tc:wsrp:v1:bind" xmlns:s3="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s4="urn:bea:wsrp:ext:v1:bind" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl">
<import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-2.0/markup?WSDL" namespace="urn:oasis:names:tc:wsrp:v2:wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wlp_wsrp_v1_bindings.wsdl" namespace="urn:bea:wsrp:ext:v1:bind" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wsrp_v1_bindings.wsdl" namespace="urn:oasis:names:tc:wsrp:v1:bind" />
<wsp:UsingPolicy s0:Required="true" />
- <wsp:Policy s1:Id="ProducerDefaultPolicy">
- <wsp:All>
- <wssp:Identity xmlns:wssp="http://www.bea.com/wls90/security/policy">
- <wssp:SupportedTokens>
- <wssp:SecurityToken TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-2004-01-saml-token-profile-1.0#SAMLAssertionID">
- <wssp:Claims>
<wssp:ConfirmationMethod>sender-vouches</wssp:ConfirmationMethod>
</wssp:Claims>
</wssp:SecurityToken>
</wssp:SupportedTokens>
</wssp:Identity>
</wsp:All>
</wsp:Policy>
- <s0:service name="WSRPService">
- <s0:port binding="s2:WSRP_v1_Markup_Binding_SOAP" name="WSRPBaseService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup" />
</s0:port>
- <s0:port binding="s2:WSRP_v1_ServiceDescription_Binding_SOAP" name="WSRPServiceDescriptionService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/serviceDescription" />
</s0:port>
- <s0:port binding="s4:WLP_WSRP_v1_Markup_Ext_Binding_SOAP" name="WLP_WSRP_Ext_Service">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-wlp-ext-1.0/markup" />
</s0:port>
</s0:service>
</s0:definitions>

did you publish the internetserive "<b>bbpstart</b>" to site internal?
Regards
Raja

What's the error code: 1661 during the IOS5 restore?

what's the error code: 1661 during the IOS5 restore?

What country are you in, and are you trying to use another country's store ?

I have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

i have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

i just baught it off someone.. so im unsure if it was jailbroken or not.. and i dont think its under warranty now.
is there a software or something along those lines that would indicate what peice of hardware is faulty?
i baught it in this recovery loop thinking it was going to be a cheap way of getting a new phone without having to do much.. but now im starting to think its a brick

Error code -42404 after the 10.4.1 update

Similar Messages

Maybe you are looking for