Error code (4880) when trying to burn a playlist to disc

I have never had a problem burning play lists to disc, before installing iTunes 8. I fact up until a few weeks ago burning was a breeze and was really fast. but now every time i try to burn a disc it starts burning the first two tracks and then says disc burning is canceling then ejects the disc and displays the error message: 'unable to burn disc. An unknown error occurred (4880)'
Has anyone any Ideas on how to solve this problem? It is starting to become very irritating.

I too have been having troubles burning DVDs from iTunes, in my case under Vista. I think this could be a re-run of an earlier iTunes problem when Apple took a sudden dislike to grammatical expressions such as '. Anyway, by trying to burn with other software I've found the error happens when iTunes tries to burn a track with either a very long name, or a track that contains an odd symbol. Just now a track name from Verdi's Aida was not only very long but also contained this symbol / and I got repeated Error 4850. Once I edited the track name to remove this (and shortened the track name for good measure) the problem has gone away.
Jeff Underwood
<Edited by Moderator>

Similar Messages

  • Error message 4850 when trying to burn a playlist to disc

    I have recently upgraded my laptop to a dell E6500, and have downloaded the latest version of itunes. Since I have had this new laptop, and new version of itunes, I have been unable to burn discs from playlists. It starts to write a track, and then i get an error message "4850". Can anyone help me with this? Ive seem some other people saying they have had this problem, but im not v conputer savvy, and dont always understand their technical response
    Thanks

    I too have been having troubles burning DVDs from iTunes, in my case under Vista. I think this could be a re-run of an earlier iTunes problem when Apple took a sudden dislike to grammatical expressions such as '. Anyway, by trying to burn with other software I've found the error happens when iTunes tries to burn a track with either a very long name, or a track that contains an odd symbol. Just now a track name from Verdi's Aida was not only very long but also contained this symbol / and I got repeated Error 4850. Once I edited the track name to remove this (and shortened the track name for good measure) the problem has gone away.
    Jeff Underwood
    <Edited by Moderator>

  • I am getting error code 0x8002006E when trying to burn a DVD

    Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • Keep getting error code -50 when trying to burn a disc. how do I solve this?

    Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • TS1436 Error Code 4310 when trying to burn a cd

    I get he error code 4310 when i try to burn a cd on itunes.
    I have a brand new ASUS with windows 8.
    & also i tried to burn a cd using windows media player but it won't let me on there either.
    Can someone please help me?

    I get he error code 4310 when i try to burn a cd on itunes.
    I have a brand new ASUS with windows 8.
    & also i tried to burn a cd using windows media player but it won't let me on there either.
    Can someone please help me?

  • Error code 0x80020022 when trying to burn regular CD-R but reads still ok

    My imac has an optical drive that reads & plays DVD's but only burns CD's. *At least it used to* burn CD's. Now when I drag files to be burned, I get this:
    "Burning the disc failed because communication to the disc drive failed.
    (Error code 0x80020022)"
    The machine will *READ Cd's* just fine, and will *PLAY DVDs* just fine. It just refuses to burn CD's for me, even just a little jpeg or text file or something. Have tried alternate media, no difference. Is this some bug in Tiger, or are these drives just starting to fail, and how easy is it to replace this myself in a domed-base imac?
    Everything's been fine for well over a year. Problem just started appearing last week. No new apps added, nothing clanged. Appreciate any advice. Stats follow:
    Machine Name: iMac
    Machine Model: PowerMac4,2
    CPU Type: PowerPC G4 (2.1)
    Number Of CPUs: 1
    CPU Speed: 700 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 384 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.4.1f1
    System Software Overview:
    System Version: Mac OS X 10.4.3 (8F46a)
    Kernel Version: Darwin 8.3.0
    Boot Volume: Main Hard Drive
    The drive: MATSHITA CD-RW CW-8572:
    Firmware Revision: 2A11
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    Burn Underrun Protection CD: Yes
    Write Strategies: CD-TAO, CD-SAO
    Media: No

    Me again (answering myself ... things must be bad huh? After posting I continued to work on the problem. I first used Onyx to run cleanup scripts and verify etc. Then I decided to follow the advise from one blog and burt 2.5GB onto a DVD using x1 speed instead of default x4. THIS WORKED ... slow but sure. Good luck and don't worry ... if this was a one off "I'll be back" to let you know!
    Also check out 2005 threads I mentioned at
    http://forums.macosxhints.com/archive/index.php/t-45310.html
    and ...
    http://ask.metafilter.com/24882/Cant-burn-a-CD-on-external-drive-on-OS-X
    and ...
    http://en.allexperts.com/q/Macintosh-OS-1063/DVD-burning-problems-5.htm
    and ...
    http://forums.macrumors.com/showthread.php?t=231076
    and ...

  • TS4522 What is the problem when I get error code 0 when trying to burn a DVD.  It stops around 60-some %.

    I have tried twice to burn a DVD, and both times I get error code 0 at about 60-some % of the transcoding.  I haven't had any trouble burning DVDs before now.

    I had a friend with similar problem, not sure of cause. Happened when sharing to Apple device as well.
    Apple said to delete all files in Render folder. We did not try that as-
    Problem changed slightly for us, in that Share to 'Apple device 720' got to 50% and pretended to have completed its operation, but no file found in Project Share folder.
    We found then, if the timeline clips where highlighted it would share, where previously it had repeatedly failed.
    Hope that helps

  • Error code -3 when trying to burn a cd

    I am haveing a problem burning CDs from my playlist. I had to burn one disk 2 times and both times, I had an error that my preffered CD burner is unavailable (the internal one) and then it would burn the disc, but it would have the first song recorded blank/muted. When I try to use an external CD burner, I get error code (-3). Does anyone know what this means and how can I fix it?
    Thanks.

    I had the same problem with Dell Vostro 1000. My problem was with TSScorp DVD+RW TS-L632H drive. I applied new firmware that lilmaqi posted the link to and it worked. Make sure you follow the instruction on how to apply the firmware fix.
    http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&relea seid=R173097&formatcnt=1&libid=0&fileid=235346

  • Error code 0x80020063 when trying to burn cds. HELP PLEASE

    I have a brand new Macbook Pro, less than 90 days old and am having CD burning issues.
    Every other cd I try to burn it fails at the end when it goes to verify the CD. This is getting old as I am throwing away half my CD's. I have searched all over and cannot find a fix. HELP, whats the deal here.

    If this is the error (error code 0x80020063) then it may be happening on verification. The second time it occurred I popped the disk back in and ran disk utilities to verify the "faulty" CD. It came up clean. When I double clicked on it, all the files I had copied were there. I even opened a few to make sure. It may be a spurious reading—at least it was in my case. Hope this helps.

  • Error code 0x8002006E when trying to burn photos to a dvd disk. Please help.

    Im trying to burn photos to a DVD so my friend can view my pictures on their windows computer. There is only 371 pictures for a total of 1.72G of space. It starts to burn them, and then in the middle of the process I get an error code 0x8002006E and it stops, wasting my disk (I assume because the computer no longer recognizes it afterwards). So, I am now down by two DVD disks. What I did was, I made a folder on my desk-top and placed my photos in it from iPhoto '11. I did this because it said that's how to do it if you want your friend to be able to view them on a windows computer. Then, I closed iPhoto and right click on my folder (on my desk-top with the pics in it) and click burn.

    What speed are you burning at and what brand/type of DVD disk are you using?  Are you able to burn a CD?
    It could be a dirty laser in the optical drive.  Get a disk cleaning disk, one with dry brushes - no liquids and use it to clean your optical drive. Burn at the slowest speed available, 2X - 4X.  Use quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums

  • I get error code 0x8002006D when trying to burn images to dvd

    I purchased some Verbatim DvD-r's from the Apple store; I made an iPhoto burn that worked fine. However, I need a disk that I can open with anything, for archival purposes. I exported to an external HD, as well as to the disk itself from iPhoto, but I keep getting the error code. ANy ideas? Thanks!

    2 things there is Media available but you must be careful to read the packaging carefully.
    16X Maxell DVD-R reads that it will burn at 1X,2X,4X,8X, and 16X.
    Next there is a huge difference in Quality of the Media you purchase.
    http://www.digitalfaq.com/media/dvdmedia.htm
    As you see the Maxell is one of the highest in Quality.
    My advise is to always go for quality over price (cheaper) is one of the largest causes of burning problems.
    Another important thing to remember is DVD-R Media is the most widely used and recognised by the majority of computers (especially the older ones).
    http://www.videohelp.com/dvd
    Please understand there is not only a big difference in the Optical Drives installed in the different Apple Computers, but the Media, Speed and Format they are capable of using. This is the reason For the Media I suggest.
    It covers the correct format but covers the speed problem as well, for older and newer burners as well.
    Don

  • Error Code Ox8002006E when trying to burn files. Why? What can I do

    I keep getting this error code and can't burn anything without getting it. Don't know what to do?

    Have you checked if there is any video content in the file as I have just reburnt a number of disks after removing vidoe and have had no problems
    Verbatim DVD-RW 4.7gb 6x

  • Error Message 4621 when trying to burn a playlist

    I am running Windows XP and Itunes 10.4. I haven't burned a playlist to a CD for about 5 years and the last time I did, there was no problem. I imported one of my purchased CDs into Itunes and all songs play fine. The CD has since been damaged and I was trying to burn the songs onto a CD. I'm using Maxell CD-R discs. After about 30 seconds, I get an error message 4621 saying that my attempt to burn failed. I am using a Dell XPS 400 and my E drive is HL-DT-STDVD+-RWGWA4164B. I haven't updated drivers in a while, but the drives work fine and play the CDs. Does anyone have any suggestions on how to fix this problem?
    Thanks
    Kelly

    I too have been having troubles burning DVDs from iTunes, in my case under Vista. I think this could be a re-run of an earlier iTunes problem when Apple took a sudden dislike to grammatical expressions such as '. Anyway, by trying to burn with other software I've found the error happens when iTunes tries to burn a track with either a very long name, or a track that contains an odd symbol. Just now a track name from Verdi's Aida was not only very long but also contained this symbol / and I got repeated Error 4850. Once I edited the track name to remove this (and shortened the track name for good measure) the problem has gone away.
    Jeff Underwood
    <Edited by Moderator>

  • Error Message 4880 when trying to burn

    Just updated to latest version of Itunes and now I can't burn a disc no matter what I try, I lowered speed and went thru every thing I could think of, please help if you have any suggestions, gone thru 20 blank discs and really ready to give up, please any help would be much appreciated.

    I'm having the same issues since the update. It's really frustrating.

  • When trying to burn a playlist to disc I keep getting the message 'disc burner or software not found'. What can I do to fix it?

    Each time I try to burn a cd from a playlist, I keep getting the message 'disc burner or software not found' I haven't changed anything recently. Why has this suddenly started happening?

    It's c. 14 months old and sometimes it gets hot...

Maybe you are looking for

  • What is the best way to stack DAQ aquired data in labview?

    I'm developing an application to work with an M-series daq card and labview 8.5 to output a signal and then record on 8 differential inputs for a short period of time (~10 ms). I need to stack my data, however, because the incoming signal will be ver

  • Possible to use Leopard disk to install Boot Camp on 10.4.1 ?

    I have a MacBook Pro running 10.4.1, and I have a number of Mac programs that are not yet compatible with Leopard. I would like to install Boot Camp, but I can't install Leopard until those programs are updated. I have already purchased Leopard (but

  • Opening a pdf file from the internet.

    Everytime I try to open a pdf file from the internet a window pops up and tells me that my adobe reader has a problem or gives me a blank page.  I have ie 10, adobe reader XI and adobe acrobat 8 pro.  All this is on win 7.  When I installed the acrob

  • Incorrect Exchange Rate Differences Generated

    Hi All, My client's version is 8.8 SP0 PL21. I run the Exchange Rate for GL Account (eg Bank Account) to revalue it at month end. The local currency = USD. The EUR Bank Account Balance is USD 1900.00  with EUR 1400.00 (as example). It is a Debit Bala

  • Slideshow Playback "Out of Focus" on DVD

    I exported a Keynote slideshow as a .mov and burned it on a DVD. When I played the DVD, everything was "fuzzy" as if it were out of focus or a very soft focus. I used the same process that I have used previously (as well as I remember) and those DVDs