Error code 5 when booting from CD/DVD - Equium A200

I am trying to boot from CD/DVD and get the message: Cannot boot from CD - Code 5
Using a Windows Vista Home boot-cd.
The CD/DVD-station is ok. Have tried another station.
Have also tried another HDD.

Generally speaking you can use original Microsoft installation disc for OS installation. I have done this numerous times and have never noticed such errors and I have done this on different notebooks. One of them was Satellite A200. it is absolutely the same as your Equium.
My question: do you use original Microsoft installation disc or some own creation?
Put error code 5 in Google and you will find interesting articles about this.

Similar Messages

Error Message when booting from System CD's

Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuck

Not only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck.

Ethernet seems to work when booted from Leopard DVD--Not anytime else

Ok. Here is the deal. iMac G5 connected via ethernet cable to router. It will not connect. The airport works fine. I unplug the same cable and plug into macbook pro--it works just fine. Plug it back into iMac.
In network utilities when booted from the disk--I can ping away just fine. So--in network preferences when I boot it up again I attempt to put the IP address, subnet, router yada yada yada in manually and after about twenty five seconds of the program chewing on it--it crashes. Over and over again. Airport works just fine. PowerBook and Mac Pro connected to same network---all check out.
Any thoughts?

Hi,
The internet port is meant for modem, and ports 1,2,3,4 are meant for computers.
After making proper connections reset router for 1 minute, and rebbot it.
Now run easy connect program for configuring router.

G5 Black & white video when booted from install DVD

It has been years since I installed 10.5 on our G5 so I can not remember if this happened back then but think it did.
When I boot from an install DVD (both the original G5 DVD with Tiger and the MacOS Leopard DVD) the video output drops to 1-bit (dithered black & white) which makes it very hard to discern the text on the shaded buttons in the GUI. The video card is fine - when I hold down the Option key on boot to select the DVD the video is full-color, but as soon as it switches to running from the DVD the video becomes low-rez dithered b&w.
Anyone else see this issue and suggestions on resolving it? The display is a Dell 17" wide model. I don't have another display that is easily swappable to see if it's a problem with it or the Apple DVI-to-VGA adapter.
The G5 tower is a first-generation 2x2 (2CPUs, 2GHz) with 2 DVI ports on the video card (can't recall which card I ordered back then).

Great to hear, thanks for the report!
I suspect what happened, was that the Install also changed some PRAM or NVRAM setting, those are where number of colors are held.
Some earlier Macs store these settings in PRAM:
Status of AppleTalk
Serial Port Configuration and Port definition
Alarm clock setting
Application font
Serial printer location
Autokey rate
Autokey delay
Speaker volume
Attention (beep) sound
Double-click time
Caret blink time (insertion point rate)
Mouse scaling (mouse speed)
Startup disk
Menu blink count
Monitor depth
32-bit addressing
Virtual memory
RAM disk
Disk cache
http://support.apple.com/kb/ht1379

PowerBook 17 crashes consistently, even when booted from Tiger DVD

We have a new PowerBook 17 that has started giving us problems in the last day or so. It will hang after running for a few minutes. This is a consistent problem - it doesn't go away for an hour, or a day - if the machine is running, it will hang. There is no kernel panic, no dialogue box, the trackpad, mouse, etc. simply stop responding (the clock freezes too, so I know the system is hanging up - not just input devices).
I've managed to run throught most of the normal trouble-shooting methods, I say "managed" because the machine froze when I was booting into single user mode. So I went to the Tiger DVD that shipped with the laptop. Upon getting to the language selection dialog box - it froze again (no mouse, keyboard activity, etc.). Eventually, the machine did boot from the startup DVD - and I ran disk utility. Of course it found no problems with permissions or the disk because this is apparently hardware related, no?
That being said, an archive and install will probably do us no good. But would Tech Tools (came with our AppleCare) manage to at least spot a Hardware issue? At this point, the only thing I haven't done is removed the third-party RAM we installed (which has been installed for nearly two weeks with no sign of conflict). That will be the next course of action and we'll run Tech Tools. Any ideas or suggestions regarding this issue would be greatly appreciated. We all know that being down one machine is not a good thing - thanks in advance for any assistance.
PowerBook G4 17" 1.67 Ghz Mac OS X (10.4.5) Might Mouse, 1.5 GB RAM, 100 GB HD
PowerMac G4 Mac OS X (10.4) 20" Cinema Display - 2G 20GB iPod - much, much more

David,
I always had a pristine system: no kernel panics, no system hangs. Then, one day I started to have kernel panics and hang ups and when I tried to install XCode it failed, then I couldn't install iWork '06. At first I thought it was a problem with the disk until I decided to run Apple's hardware test. After all, it was just a problem with one of the 512MBs memory DIMMs. Removed the offending DIMM and everything went back to normal.
So, I think you should try the hardware test. To do this just start up from the original installation disk while pressing the option key and then choose Apple Hardware Test from the available startup disks.

SP6000 won't boot from a DVD (but does boot from CD)

Hi,
It's the second time I try to boot a Linux Live DVD (burnt on DVD-RW), to no avail: the disk spins for a few seconds at several (low) speeds, then the boot reverts to HD. On the contrary, it boots fine from a recovery CD or a Win installation CD (both burnt on CD-RW).
Is this a known "feature" of the SP6000 BIOS, or of the drive (Toshiba SD-C2502)? Can this be circumvented?
Thanks for any help.
L.

For some reason, I've had to change the BIOS' boot order (typically F2 at start-up) to have the CD/DVD drive in the first position when booting from a DVD in order for the drive to complete the process. Merely selecting the CD/DVD drive by hitting F12 is insufficient.
It appears that the CD/DVD drive either resets or is powered down too quickly to get through the amount of data on a DVD, but a CD is small enough to finish the load. Reordering the BIOS seems to keep power and attention on the drive though.
Let me know if that works.
Everyone has a naughty side...mine gets paid

G5 Grey screen (Kernel Panic) when booting from CD

I know there are a lot of posts with people experiencing issues with the grey screen during boot. Most resolutions point to hardware but all state, including Apple's walk through, to boot from CD and run a validation on the hard drive.
My issue is completely different. I get the grey screen of death when booting from a CD/DVD only. I can boot into the OS just fine from the hard drive. But if I try to install another OS, or just boot from the CD/DVD, I get the grey screen.
What I've done to troubleshoot:
Reduced RAM to original sticks
Removed hard drive
Replaced DVD drive
Tried multiple versions of OS discs (10.2, 10.3, 10.4 and 10.4 server)
Reset the PRAM (Both via keyboard and Open Firmware)
Replaced the video card
Replaced the logic board
Replaced the Processor
Quite litterally the only thing original in this system is the power supply and the memory. However, I only get it when I'm booting from CD so the memory should not be the issue. I've even used a seperate power supply for the DVD drive to see if it was causing an issue.
Any suggestions? I'm looking at possibly replacing the power supply but I'm afraid it's going to give me the same issue.

Thats the thing, I've tried 10.2, 10.3, 10.4, and 10.4 server. (CD and DVD) All give me the grey screen. Well 10.2 and 10.3 give me a dark grey square in the middle where the apple should be but then the fans ramp up like it does when you get the grey screen of death.
I've also used two different drives.
It reads the disks fine with no issues. If I boot to the hard drive I can use the system like nothing is wrong. But if I want to boot from CD for any reason I cannot.
If I follow the logic it seems it is something to do with the CD/DVD drive. This is because it works fine when booted to hard drive. If it was the memory or PSU then I'd be getting the problem all of the time and not just when booting from CD/DVD.

No display when boot from DVD

NVIDIA GeForce 6800 Ultra
30" Cinema HD Display
When I attempt to boot from DVD to run the Hardware Test, the display does not light up. The monitor's power light is on but the display is black.
What might cause this? How can I work around it?
Dual G5 2.7 GHz Mac OS X (10.4.7) 4 GB RAM

Ah well, as is often the case, shortly after I posted the question the situation changed...
I tried booting from the DVD one more time. This time I left the DVD in the machine and used "Restart" instead of a cold restart. It booted fine. Yeah! I guess the monitor stayed in sync or something.
So the Hardware Test was run, terminated normally and reported no errors. Which is good news.

Grey circle with cross in the middle when trying to boot from Tiger DVD

When I try to boot from the DVD that installs Tiger, it get the Apple logo and spinning wheel as usual when booting a Mac OS. Then the Apple logo turns into a grey circle with a cross in the middle, signifying "no"! I haven't locked my firmware, but could it be locked? I got the computer from Apple when my original G5 died (it was a lemon). Did Apple lock the firmware???
The OS on my Macintosh HD is Leopard.

So what specific model is this iMac? Is it a G5? Or is it an Intel iMac?
If it is a G5 you have posted in the wrong forum, this is the Intel forum. A G5 is not an Intel Mac, it has the IBM PowerPC CPU.
If this is an Intel, which Intel model is it? Did it come with Mac OS X Tiger installed on it? If it did not come with Tiger, if it came with Leopard, you cannot put Tiger on it.
Dah•veed

Hard disk doesn't appear in disk utility when booting from dvd only via usb

i put a new hard disk (wd3200bevt) in my macbook white and my macbook pro 2.4 (not alu). when i boot from the dvd (10.5) disk utility doesnt find any disk. when i boot from an usb stick with leopard on it then it found the disk and i can install the system. when the system is installed and the books can boot the installed system anything looks fine, but when i boot from the original dvds disk utility doesn't find any hard disk once more.... when i boot from my usb stick it shows the new disk in disk utility. what is the problem when i boot from dvd?

don't know but try two boots in a row. worked for me.

Installed HP UEFI Support Environment, now no option to boot from CD/DVD when pressing F9 on bootup

I have an HP ENVY TouchSmart 17-j153cl 17.3" Touchscreen Notebook
Product Name: HP Envy TS 17 Notebook PC
Product Number: F9M09UAR ABA
Operating System: Windows 8.1
I stupidly installed...
HP UEFI Support Environment - sp63599
...withou knowing what it does.
Now when I hit F9 to change boot order on bootup, I no longer have the option to boot from CD/DVD. The only two options available are to boot from OS boot manager or boot from efi file.
How can I uninstall sp63599 so I can boot from CD/DVD again?
If I select Legacy Boot in the BIOS it says I will not be able to start my operating system.
If all this means is that I will have to reinstall Windows from CD/DVD, then I can live with that.
What should I do to get the option of booting from CD/DVD back?

I figured it out.
EUFI only displays the CD/DVD boot option if you have an EUFI-bootable disk in the drive.
When there is no disk or a Linux boot disk in the drive the CD/DVD boot option does not show up.
When there is a WIndows 8.1 installation disk in the drive, the CD/DVD boot option shows up.
In the old-style BIOS the CD/DVD drive showed up whether there was a bootable disk in it or not.

Error-code when launching Time Machine from MacBook Pro

I´ve get this error-code when launching Time Machine: An unaspected error has acourd (errorcode -6584)
Solution on this?

Sounds like OSX has lost track of where it is. Try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.
If that doesn't help, try repairing your backups, per #A5 there.

IMac can't/won't boot from Leopard DVD

My 1GHz G4 iMac can't or won't boot from the DVD, although I know the media is good.
I get stuck on the grey screen, the rotating bug stops rotating after about 5 minutes.
It will still boot from the hard disk fine, and will boot with other DVDs as well. Hardware diagnostics check out fine.
I did try single user mode, it will get there OK.
Verbose mode spits out a lot of messages (who knew? - lol), but nothing that seems to point to any one issue. It too stops spitting out messages after about 10 minutes.
Any ideas?

I did try the clicking the mouse thing just for the heck of it... no joy.
I do see a few other threads like this one, so I'm not alone on this.
The error messages I see are (not going to type them out all the way):
launchd[1]: Failed to count the number of files in /System/Library/StartupItems no such file or directory
Then a bunch of mDNSResponder errors, also saying either no such file/directory or invalid destination port.
Then a message saying Folder Manager is being asked to create a folder (cach) while running as uid 0
Then Cannot use ATS Persistent Store - switching to old FODB cache code
kextd[47]: root filesystem is read-only; skipping kernel link data generation
followed by a couple of errors from configdp[41]
Then nothing....
Still stuck...

Pavilion TouchSmart PC 20-f323, how to boot from a DVD?

My client has a HP Pavilion 20-f323 TouchSmart PC with Windows 8 on it and wants to downgrade and install Windows 7 Pro instead.
However, my first question here is, how do I boot to my Windows 7 Pro DVD on the TouchSmart PC? I cannot even find a boot menu option to boot from the DVD player.
Any other URLs pointing to this downgrade process would be appreciated!
Thank you very much for your time.
This question was solved.
View Solution.

****Disclaimer*****
HP doesn't recommend the installation of Windows 7 on a computer shipped with Windows 8, nor will it support the installation of Windows 7. HP will not provide Windows 7 drivers and suitable drivers may not be available for the hardware in the computer. Also, Windows 7 may not support some of the hardware or software features designed for the computer.
Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING.
You will need to purchase a new copy of Windows 7 with a valid COA and product key.
The screen shots below are from an HP 15t-j100 notepad computer... the options and configuration screens on your computer may differ.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "BIOS Secure Boot configuration" on the settings page similar to what is shown below, before you can attempt to install Windows 7;
After saving the changes, the computer will request that you confirm the changes... Accept the changes by typing the four digit code and pressing the "ENTER" key.
If are you are installing from a USB stick and see a "Load Driver - a required CD/DVD drive device is missing" message, this is because "System Configuration" > "USB3.0 Config in Pre-Boot" is set to "Enabled". This must be set to "Auto". This should clear up the CD/DVD device missing.
Additionally, as the hard drive is most likely partitioned as GPT, you must boot using the UEFI-Internal CD/DVD or UEFI-USB Key/Drive to install Windows on a GPT partitioned disk. Turn on or reboot the computer and tap "F9" or "ESC" and then "F9" when prompted. Highlight the UEFI boot source you are using and press "ENTER".
I suggest using Windows 7 SP1 for the best intallation experience. If you need Windows SP1, please see "How to Install Windows 7 Without the Disc" to download and create your own Windows 7 SP1 disc. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive (may require DISABLING "Fast Boot" in the BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid UEFI enabled USB Flash drive if it is formated as NTFS and may require a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installer, or WiNToBootic. I like Rufus, as it has options for "GPT partition scheme for UEFI computer" and "FAT32".
From the top...
1) Turn on the computer and immediately start tapping the "ESC" key.
2) When the MENU comes up, press the "F10" key.
3) Navigate the BIOS to "System Configuration", "USB 3.0 Config in Pre-OS" and set to "Auto".
4) Navigate the BIOS to "System Configuration", "Boot Options" and set "Secure Boot" to "Disabled" and set "Legacy Support" to "Enabled".
5) Press "F10" and click "YES" to "Exit Saving Changes"
6) Computer should restart and display "Operating System Boot Mode Change"... type the four digit code and press "ENTER".
7) Let Windows 8 boot-up and place the Windows 7 SP1media in the DVD drive or USB port, then log-off / shutdown.
8) Turn on the computer and immediately start tapping the "ESC" key.
9) When the MENU comes up, press the "F9" key and then select the correct UEFI boot source (Internal CD/DVD drive, USB CD/DVD drive, USB Flash drive, etc.)... Press any key to boot CD/DVD, if prompted.
10) Select "Language", "Time / Currency", and "Keyboard" settings and then click "Next"
11) Click "Install Now"... check "Accept Terms" and click "Next". Click "Custom (Advanced)".
12) You may need to supply AMD SATA/RAID drivers at this time... Download AMD Chipset Drivers (Chipset / AHCI / USB 3.0)
13) "Where do you want to install Windows 7???" Select "Disk / Partition" with "Unallocated Space" you created earlier and click "Next".
14) Follow all prompts and answer as needed. Enter Windows 7 key when requested.
Please post the Windows Device Manager's "Hardware Ids" (just the text) for all remaining missing or unknown devices as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

IMac i7 not booting from Replacement DVD

After having displaced the installation DVDs for my Quad-Core iMac i7 I needed to order a replacement kit from Apple when I all of a sudden found myself wanting to reinstall SL.
After a couple of days I received "Mac OS X Snow Leopard Install DVD - Replacement DVD 2Z691-6558-A" in the mail.
Problem is, when trying to boot from this DVD the computer halts at the Apple logo. No spinning wheel, it just sits there showing the logo ad infinitum (leaving it overnight - no progress).
The install DVD works fine in my Macbook, and I can boot a Windows 7 install DVD in my iMac.
Wouldn't this indicate that the Replacement DVD I have received is not suitable for my specific iMac model?
Message was edited by: vibber

Brilliant. Turned out (as I suspected, but was assured not to be the case) that Apple support had sent (and charged me $30 for) the wrong Replacement DVD.
My model needs 2Z691-6590, -6591 or -6608, not 2Z691-6558-A, according to the repair guys. Guess it's too much to ask that the iMac could display a proper error message stating this fact, yesno?
To add insult to injury I will of course be charged a further $100 for the diagnostics (I have no time and energy to even attempt arguing myself out of that one).
What I probably should do is put my iMac up for sale, and use the funds to get a Wintel box. At my age I need to feel at least a little bit in control of my computer.

Error code 5 when booting from CD/DVD - Equium A200

Similar Messages

Maybe you are looking for