Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
Sandesh

HI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu

Similar Messages

Error message: "Enter valid currency [Message 173-57]" during Deposit transaction

Hi All,
Is there a specific reason why can't I deposit from a "Multi-currency" cash account to a "specific (i.e., USD)" cash account using the Banking> Deposits> Deposit module.
I have already read below threads related to this issue.
Error message "Enter valid currency [Message 173-57]" during cash deposit
Can't Create Cash Deposit of Journal Entry due to "Invalid Currency" Error
Transfer Between bank accounts in different currencies
GL Postings between different currency accounts
foreign currency transactions
SAP Business One Note: 1260658 - Transfer monies between different monocurrency accounts
I have posted successfully e cash transfer from multicurrency to monocurrency cash account thru Journal Entry, However, I wanted to know the reason why it is not possible to post this transaction thru the Banking> Deposit module.
Appreciate your feedback on this matter.
Thanks!

Hi,
Same error message is appeared in 8.81 PL10. So this is not due to PL. If you select other than local currency at deposit currency, this error appears.
Let me check and update.
Thanks & Regards,
Nagarajan

Getting error code 5002 in itunes

Getting error code 5002 in itunes and tried the recommendations. Makes no sense! I can enter my account in safari and on iTunes store, but not through Itunes software!

Hello jmmairs,
It sounds like you are getting error code 5002 when trying to use the iTunes Store. Take a look at this info from the following featured discussion:
iTunes Store Error message 5002
https://discussions.apple.com/thread/4852016
This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account.
Change your country if necessary
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.
Thank you for using Apple Support Communities.
All the best,
Sterling

Why do I get an error code 5002 when trying to redeem an iTunes gift card?

I have an iTunes gift card and everytime I enter the redemption code I get an error code 5002. Sure would like to be able to redeem my card.

This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

Error code 5002 help requi

I am trying to install Creative MediaSource Player/Organizer 5.0.38 ([size="2" color="#3300ff">CMS5_PCAPP_LB_5_0_38.exe) for a Zen Micro?on a friends computer, having downloaded it from Creative whever I run the program it all extracts but once the install starts I get the "Error code 5002". I have also tried to install from the net with the same error, not surprisingly. I have also tried to install while in safe mode it gets further but then obviously doesn't see the player so then won't let me go further. Any ideas anybody, please?

I think this error can be for several reason, mainly about master data.
I'm sure one of them is a customer issue. the customer is not good. It can be also a wrong item code.
Try to use the SBO application, entering in the form excactly the same data than you try using the SDK. it may be revelant.
Sebastien

HT201209 I keep getting an error code (5002) when I try to redeem my gift card.

I keep getting an error code (5002) when I try to redeem my gift card.

Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason

SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
    ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
    LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalder

Hi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error code -5002

Hi ,
I've tried to update a sale order (ORDR), but it returns the error code "-5002,msg= Document rows cannot be closed concurrently with the other document modifications you have made[RDR1.LineStatus][:Line:0]
the code is the following:
      Dim Irow As Integer
        Dim lErrCode As Long
        Dim sErrMsg As String
        Dim rnt As Integer
        Dim cnt1 As String
        Dim cnt2 As String
        Dim rrnt As Integer
        Dim grnt As Integer
        Dim errcode As String
        Dim errmsg As String
        If oCompany.InTransaction Then
            Else
                oCompany.StartTransaction()
            End If
        'Sales order object
        oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        'Retrieve by Docentry
        grnt = oOrder.GetByKey(sOrderNum)
        'detail row count
        Irow = oOrder.Lines.Count
        If Irow > 0 Then
            If Not bReversal Then
                oOrder.Lines.SetCurrentLine(sOrderLine)
                oOrder.Lines.LineStatus = BoStatus.bost_Close
rnt = oOrder.Update()
oCompany.GetLastError(errcode, errmsg)
System.Windows.Forms.MessageBox.Show("Final " & errcode & " " & errmsg)
            End If
            rnt = 0
        Else
            rnt = -1
        End If
anybody can help me??
A150

Hi,
I am sorry, but this is the forum around Solution Certification - not about general SDK questions or issues.
Please use the "regular" Forum (SAP Business One SDK)!
Thanks

How do i fix error code 5002

When I go to my ituns it tells me that IT cannot connect to iTunes. And it also pops up the error code 5002. WHen I try to sign in to the app store or iTunes store on my ipode touch 4g it will not say anything or let me sign in. But if I try do sign in with my old id it will let me. Can anyone please help me I would very happy if you could.

I was receiving this error too-it has to do with the billing. I had to update my card then ADD a shipping address and turn on the express button. I then was able to get on. You might try this and see if it works.

HT1918 why do I keep getting error code 5002 when trying to make a purchase? Has been almost a week now!

Why do I keep getting Error Code 5002 when trying to make a purchase from the Itunes store? I am using Vista Home edition> havent had any problems before. This has been going on for a week.

This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.

I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go.

ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile

OGG Version 12.1.2.1.0 OGGCORE_12.1.2.1.
DB : 11.2.0.4.3
I am getting below error.
2014-12-31 09:53:09 ERROR   OGG-00868 Error code 1291, error message: ORA-01291: missing logfile
(Missing Log File <unknown>. Read Position SCN: 2585.802983323 (11103293443483)).
Our solution uses ADG and OGG
We have source and target where ADG was setup . We later broke ADG setup and made Oracle DB's in source and target into standalone.
As part of our solution during our deployment window ,we would break ADG i.e we would make both the source and target as independent DB’s with PRIMARY Read /Write mode.
-Take Guaranteed restore point on Source DB so that we can flash back at later stage(so of now we have not executed flash back command)
-Once ADG config is disabled we will start the OGG extract which is already configured before =We are at this stage where we are hit with errors and extract is not starting .

Hi ,
The error shows it is waiting for the Logfile. The Integrated extract mainly needs of the availability of two things.
1. Archivelogs.
2. Trail Files.
Both should be retained to the needed / required level.
Please execute the below query and check the status of the Extract / Capture process.
The below query displays the information of each capture process in a database.,
COLUMN CAPTURE_NAME HEADING 'Capture|Name' FORMAT A7
COLUMN PROCESS_NAME HEADING 'Capture|Process|Number' FORMAT A7
COLUMN SID HEADING 'Session|ID' FORMAT 9999
COLUMN SERIAL# HEADING 'Session|Serial|Number' FORMAT 9999
COLUMN STATE HEADING 'State' FORMAT A20
COLUMN TOTAL_MESSAGES_CAPTURED HEADING 'Redo|Entries|Evaluated|In Detail' FORMAT 9999999
COLUMN TOTAL_MESSAGES_ENQUEUED HEADING 'Total|LCRs|Enqueued' FORMAT 9999999999
SELECT c.CAPTURE_NAME,
       SUBSTR(s.PROGRAM,INSTR(s.PROGRAM,'(')+1,4) PROCESS_NAME,
       c.SID,
       c.SERIAL#,
       c.STATE,
       c.TOTAL_MESSAGES_CAPTURED,
       c.TOTAL_MESSAGES_ENQUEUED
FROM V$STREAMS_CAPTURE c, V$SESSION s
WHERE c.SID = s.SID AND
        c.SERIAL# = s.SERIAL#;
Also run this query to check, if the capture is waiting for which logfile.,
COLUMN CONSUMER_NAME HEADING 'Capture|Process|Name' FORMAT A15
COLUMN SOURCE_DATABASE HEADING 'Source|Database' FORMAT A10
COLUMN SEQUENCE# HEADING 'Sequence|Number' FORMAT 99999
COLUMN NAME HEADING 'Required|Archived Redo Log|File Name' FORMAT A40
SELECT r.CONSUMER_NAME,
       r.SOURCE_DATABASE,
       r.SEQUENCE#,
       r.NAME
FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
WHERE r.CONSUMER_NAME = c.CAPTURE_NAME AND
        r.NEXT_SCN      >= c.REQUIRED_CHECKPOINT_SCN;
The above query clearly shows for which logfile the Extract / Capture process is waiting. Check if that logfile is available in your system.
Regards,
Veera

HT3204 unable to purchase music - keep getting error code 5002 on - using Vista

Unable to purchase songs - keep getting error code 5002 - using Vista

I am having the EXACT same problem. It started on June 16th also. I found out that code 5002 is supposedly a billing issue. The article directed me to edit my billing information (even though it was correct). I tried to submit the new information and was told my request could not be processed, try later. I have been trying for 3 days. Was in contact with customer service. first they said it was an Itunes Stores issue with the software. they told me it was resolved. Then they had me uninstall and then reinstall Itunes, which still didnt resolve it. I am starting to think its still an Itunes Store issue. Still trying to cintact customer service about this.

Can not sign into itunes get error code 5002

I was able to sign into iTunes, but when attempting to download a song I received error code 5002 and to try back later. Now I Can not sign into ITunes at all and am still getting the code 5002. I've changed my credit card info via store.apple.com but this did not fix the problem. ran diagnostic check and everything is fine. Is this a problem on their end?

I fixed this error for my daughter after a while by working out that the address in her login profile was a different country from the iTunes and App store that she was logging into...
I also blogged about it to try to help others as this took out a good 6 hours of my Christmas evening trying to set up my kid's MBP.
http://blog.adaptovate.com/2014/12/fixed-itunes-5002-error-and-unknown.html
Doug

ITunes won't allow me to download anything. I get unknown error code 5002

ITunes won't allow me to download anything. I get unknown error code 5002... what do I do?
I am entirely updated.
I have rebooted.
I have exhausted this support website....
help.

I quote:
This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Similar Messages

Maybe you are looking for