Error code -51? Burn to DVD? how?

I don't understand how to burn my project to dvd now that I'm done with it, i tried to export it and it said error code -51?? and then I trie dto publish it to itunes and it said the same thing. any help?

Share your project to the Media Browser in Large or Medium.
Now open iDVD and import your project into iDVD by opening the Media Browser in iDVD and dragging your movie into iDVD.

Similar Messages

  • Error code when burning a DVD

    When attempting to burn photos to a DVD, I get the errror code ox8002006e. What does this mean and what do I do?
    Airstream1

    Possibly an issue with your optical drive.
    Are you still under warranty?
    Have you tried other media?
    Have you tried slower speeds?
    Joe

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

    i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

    See this support document for information about update and restore errors. Resolve iOS update and restore errors

  • Have Spotfy, Facebook App on home computer, trying to open on laptop and get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix?

    I have used Spotfy Music App on Facebook on my home computer, now trying to use on laptop, and i get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix this? Thanks in advance for any help

    Hi,
    You may have to install the Spotify application on the laptop to get Spotify protocols recognized.

  • I get an error code when burning a movie to DVD

    I use Premiere Elements 10 in my iMac OS lion vers. 10.7.2
    I have 250 Gb free on my hard disc. The movie I try to burn is between 3-4 Gb
    When starting to burn my movie to a DVD the following is seen in order on the screen:
    Encoding Menu 2 of 2
    Computing Media
    Burning disks 1 of 1
    and then it burns (at the end pretty quickly) to 99% and stay there.
    I get an error code:
    Internal software error: /Users/labuser/premiere/elements/molecules/pre10-bullseye/molecule-17/External/AuthorScri pt/Source/DVDCreator/FormatLib/Ma.....
    When I look on the DVD, it looks like nothing has been burnt to the DVD.
    What can be wrong?
    gardie10

    I still have trouble with burning my movies to DVD.
    Have tried the following:
    Found that I had "-" in many of my file names (clips). I removed them from the file names, but this had no effect.
    I moved my entire project folder to a shorter path folder. This had no effect.
    I have not managed to find blank DVDs on sale here in Gothenburg, but will try to buy them online.
    I have four movies that I want to burn on DVD discs.
    Have succeeded in burning two of them.
    I've tried to find what distinguishes between the two that are OK and the two that I have not succeeded with. They are all at about the same size, about 27-29 minutes long.
    The clips are .m2ts and .mts files.
    In one of the movies that are OK, all the clips are .m2ts files. In the second movie (that is OK), most of the clips are .m2ts files, but also there are .mts files.
    In the other two movies that are not OK, it's a mix of .m2ts and .mts files.
    When I try to burn the two movies which failed, I get the same course as I showed earlier (with an error code).
    I must admit that I was wrong when I previously wrote that I could burn all the movies to my hard drive. The ones I can not burn to DVD, I can not burn to my hard drive.
    gardie10

  • Error code 2131 on windows vista, how do i fix it

    i can no longer burn cd's from itunes. I get error code 2131 when trying to do so. I operate on dell with windows vista. I ran a diagnostics and everything seemed to check out:
    Microsoft Windows Vista Home Premium Edition (Build 6000)
    Dell Inc. Inspiron 1501
    iTunes 8.2.0.23
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.1.3
    Apple Mobile Device Driver 1.43.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number CC4D0456511EAEC2
    Current user is not an administrator.
    The current local date and time is 2009-10-29 01:05:24.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon Xpress 1150
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.1.0.1),
    E: TSSTcorp DVD+-RW TS-L632H, Rev D200
    Audio CD in drive.
    Found 17 songs on CD, playing time 70:20 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 02:03:52
    Track 3, start time 06:14:70
    Track 4, start time 10:58:17
    Track 5, start time 16:16:32
    Track 6, start time 21:16:07
    Track 7, start time 22:34:67
    Track 8, start time 27:42:45
    Track 9, start time 31:38:25
    Track 10, start time 35:58:47
    Track 11, start time 41:35:22
    Track 12, start time 45:32:37
    Track 13, start time 50:25:25
    Track 14, start time 54:43:17
    Track 15, start time 58:55:70
    Track 16, start time 60:25:32
    Track 17, start time 65:26:62
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 24.
    The drive CDRW speeds are: 24.
    The drive DVDR speeds are: 24.
    The drive DVDRW speeds are: 24.
    The last failed data CD or DVD burn had error code 2131(0x00000853). It happened on drive E: TSSTcorp DVD+-RW TS-L632H on CDR media at speed 0X.
    How can I fix this problem so i can start burning cd's again? HELP!

    The 2131 error is associated with the TSST TS-L632* optical drive.
    Dell off this download to fix the problem:
    http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releasei d=R173097&SystemID=LATITUDE%20D830&servicetag=&os=WLH&osl=en&deviceid=14182&devl ib=0&typecnt=0&vercnt=1&catid=-1&impid=2&formatcnt=1&libid=31&fileid=235346
    Check the compatibility tab on the site as far as I can see your Dell model is in the list assuming your sig is correct.

  • Why do i keep getting error message while burning a DVD using iMovie footage?

    I made an iMovie, loaded it into iDVD, watched it on my MacBook, tried to burn it and received an error message along the way saying that it couldn't continue.  Another pop-up simultaneously said that I had to choose a source for my blank DVD-R.  What am I missing?

    How did you load it into iDVD?
    The recommended way is to
    1) in iMovie, use the Share menu to SHARE/MEDIA BROWSER in Large Size.
    2) Open the Media Browser in iDVD (at lower right) and drag in the movie you just shared.
    3) Set up any menus and such and burn your DVD.
    Is that what you did?

  • "Drive Reported an Error" message when burning a DVD+RW

    Hi, all!
    I am trying to burn a rewritable DVD, HP DVD+RW on my Matshita R UJ 857E and each time I try I always get the following message:
    *Drive Reported an Error:*
    *Sense Key = MEDIUM ERROR*
    *Sense Code = 0x73, 0x03*
    This happens with a few RW DVD disks that I tried to burn. The disks are HP disks and they work correctly on a PC.
    Please, advise!
    Message was edited by: Asen

    Emerson Fortune wrote:
    Hi All
    I'm also having problems burning DVDs on my MacBook Pro, no problems buring CDs.
    Each time I try to burn a DVD the disc is ejected, often during finishing, and 'medium write error'is displayed. I have tried different media and varying speeds but with no success, Suggestions?
    After reading and testing a lot, I am convinced this is a DVD ROM problem. I believe, MATSHITA DVD-R UJ-857E has some problems with some brands DVD+R discs.
    I simply cannot figure out what is the reason to go on using those dvd roms in MakBooks after so many problems reported...
    Message was edited by: Asen

  • Error code 0x8002006e burn issue

    Hi, I have read all the threads on this issue and no answer.
    Apparently this is happening a lot. I have burned one cd-r that worked on my new mac pro, (month old) and now I cannot burn anymore without the error code 0x8002006e unable to verify. I can although reinsert the disk and it will read and can open random files, but who trusts a disk with errors??
    I have shut down all programs to burn the disk and have restarted my finder.
    I've used Sony CD-R's and Memorex DVD-R which both worked fine on Tiger on my other computer,my pc dell laptop and my external duplicator.
    Running 10.5.2 all updated installed.
    I have wasted about 7 cd-r / dvd-r both. I have the standard superdrive from apple, and I have installed a pioneer from an old imac g4, (apple techs said it was compatible), and received the error in both drives. I can burn via my external lightscribe duplicator and it works great.
    Apple doesn't reopen until Monday and hopefully it's an issue that can be resolved now.
    Any suggestions would be wonderful!!! Unfortunately the nearest Apple store is 2 hours away

    I'm having this problem with CD-Rs on my new iMac. So far 3 good burns from the Finder against 5 bad. The first 4 failures died with 0x8002006E and the most recent with "Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)". Visually all the burns failed with about the same amount of the diskwritten. The DiscRecording.log visible in the Console app shows the writes failing at the same spot (except for the first which is a nonsense number):
    +Finder: Write (10), block: 4294967146, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94240, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94080, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94144, count: 32 -> 3/0C/00 Medium Error, Write error+
    The last failure showed this:
    +Finder: Burn sense: 4/09/01 Hardware Error, Tracking servo failure+
    +Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.+
    Which is beginning to look like a hardware or firmware failure (some other forums seem to suggesting that the problem started with a firmware upgrade). I'll be checking with Apple support directly.
    One other oddity, I've tried selecting 8x burn speed - the default is 24x - but DiscRecording.log records this in every case:
    +Finder: Requested burn speed was max, actual burn speed is 24x.+
    For the record I'm not using a particularly reputable brand of media (Infiniti's from www.medea.co.uk, bought locally) because I thought I'd start with the cheap ones and work up. Messages in this forum and others suggest that the 0x8002006e problem occurs with all brands of media so I'm not confident that upgrading would fix the problem.
    Sam

  • Error Code When Burning (Power calibration area error. (0x73, 0x03.)

    I've been searching for answers to my problem and it seems like this problem has randomly popped up for many others like it has for me.
    A month ago I randomly started getting this error code Power calibration area error. (0x73, 0x03.) when I tried to burn dvds in DVD Studio Pro. When I try to burn a DVD just from the finder options I get this error Code (Error code 0x8002006D)
    But CD's burn fine for me.
    I have been using the exact same discs that were able to burn before. They are 16x speed Memorex.
    I tried relaunching the finder. I bought a Disc Cleaner today and i bought some 8x speed DVD's. I cleaned the Burner and I was able to successfully burn a 8x cd but still not the 16x.
    Does anyone know the cause of this error code? Why would it just randomly happen?

    Hi:
    Check this thread:
    http://discussions.apple.com/thread.jspa?threadID=1054119
    You can use this link ** Media Brand vs. Manufatrurer Brand ** to learn about your media quality.
    Hope that helps !
      Alberto

  • Error message 0X80020022 error code when burning CD.

    Does anyone have any idea what this error message is? I was trying to burn a DVD on X8 speed...
    If anyone could help I would appreciate it!
    Thanks
    Kris

    I believe it's a hardware issue anthough don't quote me on that as I'm not sure. I would call AppleCare with this error code. They'll know for sure. I would also try burning to a differnet brand media to ensure it's not a media issue. I would suggest you try Verbatim DVD-Rs.

  • Insert Blank Disc Error - Can Only Burn to DVD

    When attempting to burn a cs through iTunes, I continuosly get an error prompting me to insert a blank disc. The cdrs I'm using are fine and I never had a problem with them before. If I insert a blank dvd, the audio files will copy to the dvd w/o a problem. I also ran the diagnostics and received a 128-error code. Anyone have any ideas?

    I can think of one thing that may be helpful. There have been numerous burning problems in the last month since version 7.3 and 7.3.1 were released. I have been told that a new version of Itunes is available for download as of today.
    This might have been one of the errors that has been corrrected. Try that first. Download it from:
    http://www.apple.com/itunes/download/
    If that doesn't help, I hope someone else logs on who has more experience with this issue.

  • Error Code )x80020063 & Burn iDVD

    Have been trying to burn iPhoto files to DVD-R 4.7 GB discs (Verbatim). They seem to work OK but after disc is ejected from drive and the verfy==ify is complete, I get message "This disc did not verify correctly.... Because disc is unreliable, discard and try again. Error code displayed.
    Using disc afterward, it seems to be OK. but this continues to happen on each new disc.
    WilliamB (Email="[email protected]")

    I'm having this problem with CD-Rs on my new iMac. So far 3 good burns from the Finder against 5 bad. The first 4 failures died with 0x8002006E and the most recent with "Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)". Visually all the burns failed with about the same amount of the diskwritten. The DiscRecording.log visible in the Console app shows the writes failing at the same spot (except for the first which is a nonsense number):
    +Finder: Write (10), block: 4294967146, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94240, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94080, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94144, count: 32 -> 3/0C/00 Medium Error, Write error+
    The last failure showed this:
    +Finder: Burn sense: 4/09/01 Hardware Error, Tracking servo failure+
    +Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.+
    Which is beginning to look like a hardware or firmware failure (some other forums seem to suggesting that the problem started with a firmware upgrade). I'll be checking with Apple support directly.
    One other oddity, I've tried selecting 8x burn speed - the default is 24x - but DiscRecording.log records this in every case:
    +Finder: Requested burn speed was max, actual burn speed is 24x.+
    For the record I'm not using a particularly reputable brand of media (Infiniti's from www.medea.co.uk, bought locally) because I thought I'd start with the cheap ones and work up. Messages in this forum and others suggest that the 0x8002006e problem occurs with all brands of media so I'm not confident that upgrading would fix the problem.
    Sam

  • Error-29, Cannot burn a DVD or save a disc image from within FCPX using Mountain Lion

    Really stumped on this one.
    Running Mountain Lion, freshly downloaded version of FCPX, on a 2009 MacPro with 16 G RAM.
    Trying to share a 4 minute movie I edited.
    - No problem exporting as a quicktime move...worked fine
    - Big problem trying to either burn a DVD, save a disc image, or export to an Apple device.
    The progress bar gets about 90% complete, and then it stops and a message window comes up that says:
    There was an error burning your disc. The operation couldn't be completed. (DSPPublishing error-29)
    Thoughts?

    From Crash Analyzer:
    DSPPublishing error -29 (Final Cut Pro X)
    This error can occur when burning a disc if your menu has incompatible assets.
    Suggested Actions
    If your menu has a background image, make sure the image is not too large. Try reducing the size of the image and saving it as a JPEG or PNG.
    Report generated by Crash Analyzer in Pro Maintenance Tools

  • Error -50 when burning a DVD to an external FW Burner using Toast 10

    I just upgraded to a refurbed 2009 iMac 27" i7, and it of course has one fw 800 port.
    My Samsung SH-S222L dvd drive is in an Ezquest Monsoon FW 400 external case that worked
    flawlessly with my PM G4. I also have a brand new Seagate FreeAgent Go
    500GB drive, that has two fw800 ports on it.
    I connect thusly: from the iMac to the Seagate via fw 800, and then out of the
    seagate to the external dvd drive, using an fw 800 to fw 400 cable.
    The imac recognizes two devices on the FW chain.
    However, when I try to burn a dvd on the EzQuest,
    Toast Titanium 10 reports an error -50, and says that it cannot burn the disc,
    however, Toast somehow sent the command over and the drive
    begins burning the disc, even though Toast said it could not,
    due to the Mac OS -50 error.
    2 mins later ( burning at 12x on Taiyo Uden Media) the disc is done.
    And yet I cannot control the drive ( eject the disc)
    from the iMac, because it still reports error -50.
    Turning off the Drive and turning it back on,
    will mount the burned disc, and then I can eject it as normal.
    So, my questions:
    1. is FW on Snow Leopard machines THAT flaky?
    Or does it have to do with the "piggyback"...going FW 800 to FW 800 to FW 400,
    that could be causing the issue?
    2.
    Could the issue be that the error -50 is occurring because
    the iMac has TWO DVD drives, an internal and an external one?
    That Toast or Snow Leopard is making the iMac not talk to the right
    drive, and it has a momentary lapse and that causes the error -50?
    I'm at the point now tonight when I get home trying to see if just
    the drive BY ITSELF will work via FW ( going 800 to 400)
    and that perhaps the issue is that it cannot handle more than
    one device on the onboard FW port?
    At least I figured I'd give it a shot before getting a new external case,
    a USB only one ( this one is FW 400 only) and just using a USB external burner,
    and only have the one FW drive on the bus.
    Any help would be appreciated....
    terryj

    Solved it---
    the problem was the EZQuest Monsoon FW400 External Enclosure.
    Turns out that even though it has an Oxford 911 chipset,
    the firmware is not compatible with Snow Leopard 10.6.4.
    I found this out after working with both Apple and OWC
    trying to rectify it. Now to rma the Monsoon case,
    and switch to a USB 2.0 external case for the drive....

Maybe you are looking for