Error code -51 on NMH 300 with 2TB x2

i get this error when i try to copy large files to NMH 300.(error code -51) and at times -36 too.
I ve got 4 TB on the NMH 300. usually half way thru i get this error. Can any one help please.

Hi,
I am using the finder in Mac OS X.6.3.....not the media browser.
I use a Seagate 2 TB harddisk Barracuda LP SATA 3.0-Gb/s 2.0TB 7200RPM 32MB cache Hard Drive model ST32000542AS.
No its not a part of the hardware tested.
Moreover the media hub goes to sleep (red status) when transferring files. so i get the error -51.
Pl help.
I still see only 2 TB inspite of 2X2TB. i just have 300GB free it says.used 1700GB
Cheers

Similar Messages

  • HT201412 Hi, when I try to download any APP I receive Error Code: 1009 I try it with itunes Does anybody know, what the code 1009 means?  Thank you fro helping

    Hi,
    when I try to download any APP I receive Error Code: 1009
    I try it with itunes
    Does anybody know, what the code 1009 means?
    Thank you for helping

    What country are you from?
    1009 usually means your IP address originates in a country that does not have access to an App store.

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • Error Code: U44M2P20 when upgrading CS5, with Illustrator CS5 15.02

    Recently I got the message to upgrade my Adobe Creative Suite (CS5) Production Premium.  However during upgrade three components failed:
    1.     Extension Manager 5.5
    2.     Adobe Illustrator CS5 15.0.2 and
    3.     Pixel Bender 2.5
    I got the message to upgrade these components again today and the upgrade again failed.
    I then downloaded the actual upgrades and tried to manually upgrade but it again failed with error code U44M2P20
    when I looked at the error code I get the note:
    Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell
    however, I currently have Adobe Illustrator 15.0.0 and Pixle Bender toolkit 2.0 installed and working.
    how can I either upgrade or stop the upgrade messages from coming up.

    I am getting the impression that you should be saying "update" instead of "upgrade"
    If the Adobe Application Manager is involved in these messages about updates then what you can do is adjust the preferences to no longer check for updates for the troublesome program updates.

  • Error code: 0 : 10 when register with esb ................................

    I have an error when I register with ESB , the detil info
    error code: 0 : 10
    summary: ESB 系统中引发了未处理的异常错误。报告的异常错误为: "java.lang.NullPointerException
         at oracle.tip.esb.console.XMLConsoleManagerImpl.commit(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
         at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Fix: -
    Anybody who help me , Thank you very much!

    If you want help can you translate the non english part to english please. Also what version of SOA Suite are you using.
    Andre

  • Error code 5103 "Unable to Play" with rental movies! Please help!!

    I have a PC with Windows 7. iTunes 10.5.2. I purchased 2 rental movies and have downloaded them a few times now. But when I press "Play" I get the error code 5103 - Unable to Play. This has been going on for 2 weeks.
    Please help!!!!

    All it says is to download the lasted vers in iTunes which I already have.
    That's not true. It goes on to say:
    "If you have the most recent version and are still unable to download your rental, you may be able to resolve your issue by removing the "SC Info" folder. To do so, follow these steps:"
    ... and then gives links to instructions on how to do so for your particular operating system. So best to proceed with the instructions for your operating system.

  • Why do I get error code 1604 when trying syncing with itunes on my pc?

    Why do I get an error code of 1604 when trying to sync with itunes on my pc? Also when I plug in my Iphone to my pc it doesn't appear on my computer.

    Covered here:
    http://support.apple.com/kb/TS3694

  • I receive the following error: (Error code: ssl_error_renegotiation_not_allowed) which worked fine with previous version of firefox and current safari

    Trying to get to secure website (Login site for IRB at Ochsner). Worked fine with previous version of Firefox and continues to work with safari. I receive the following error code:
    (Error code: ssl_error_renegotiation_not_allowed)
    Any Thoughts?
    Thanks,
    M White New Orleans

    Here's one solution from last year: http://dotomaz.tumblr.com/post/786443743/firefox-4-0b1-and-ssl-renegotiation

  • Error Code 37 running labview 6 with windows XP

    I've checked most of the posts concerning this Generic error code 37. Here is my dilemma..Currently running Labview 6 on a windows NT system. That computer is on its last legs and we want to upgrade to XP...I installed labview 6 on an XP machine and the program runs fine..and I actually get data from my external device except I get the ERROR 37...The big thing is I cannot run a SUBVI that creates a linear fit because once I get the error 37, the SUBVI stops. I can't understand how I can read data from my external device, yet get the device not found msg. I've even tried installing LV 7, and LV 8 yet get the same results.
    Solved!
    Go to Solution.

    Thanks for the information...Unfortunately I tried all the suggestions and still no luck. The weird thing is I can get individual data from the analog device to output from the VI (i get actual data to show where it is supposed to show in the output boxes), yet I still get the "ERROR 37" message. The one big problem is that I cannot standardize the device through the LV program and therefore the individual data is not calibrated properly. In the standardize VI, the programs runs through a series of samples, and creates a calibration curve. Then when we run individual analyses the calibration curve is used. The problem that occurs in the standardize VI is that the program doesn't advance past the first sample (error 37)so I cannot generate the calibration curve.
    All of the suggestions are greatly aprreciated. What I really do not understand is that without changing anything (just copying files from one computer to another) how the error code comes about. One thing I am going to try over the weekend is to add another COMM port and see what happens.
    This may seem ignorant, but How do you "CLOSE" a COMM port???

  • I get error code 3260 when sending emails with Entourage

    For some reason, I've just stopped being able to send mail - still receiving mail ok.
    I get an error message 'could not connect to server - error code 3260'

    Covered here:
    http://support.apple.com/kb/TS3694

  • Getting LabVIEW load error code 59 using LabVIEW 2010 with a Run Time Engine.

    I use a vi compiled with a run time engine to run separate vi’s in my application directory. Once a file association is made with this exe file any Vi in my application directory is available to be loaded as needed. This is a process that has been very successful for me over the years and would prefer to continue using this process. Most of my applications are running in LabVIEW 8.6 and have moved them to 2009. First indications are in 2009 this process is still working. However, I plan to go on to 2010 before upgrading my test stations.
    In 2010 I get the error 59: “The source file’s compiled code has been separated, and this version of LabVIEW does not have access to separated compiled code.”
    The same dialog box also presents, (Hex 0x626)  “Cannot open a VI with separated compiled code in a Run Time Engine that has no access to the VIObjCache.”
    What can I do in the build that will get around this error?
    Thank you

    Thank you for the solution. I am sure this works until the next vi in the vi library gets this option selected.
     The bigger issue is I was doing something that National Instruments did not support. When I started in the days of LV 4.0 it was recommended to me that I use this method as virtually all my applications were for in house projects. This is still my preference because it gives the most versatility and allows modifications of single files rather than compiling the entire application.
    The final solution I ended up with for those who may be having the same issues. My recommendation for what it is worth, is to compile the application as an executable. This is from what I can tell the only acceptable and supported method. Using this method the problem is solved.
    I have accepted this as the solution. I still don't like it. I could list the reasons why but it is a mute point.
    Thanks again for taking the time to respond to this issue and offer the solution you found.

  • LabVIEW load error code 3 when opening VI with LabVIEW 2010

    I got this error when I try to open a VI saved in 8.6.1 with LabVIEW 2009 and 2010.
    The VI open correctly with 8.6.1.
    It's appening with only one VI. All other VIs are OK.
    Anyone experience this problem?
    What can I do to get over this bug?
    Dany
    Dany Allard

    Same issue here too. Could anyone help me to open it?
    Attachments:
    Peak Detector.vi ‏34 KB

  • Error Code -3 when installing qt with iTunes 6.0

    Any ideas? and uninstalling and reinstalling qt alone before intalling itunes causes an error too.

    hi Kelly!
    error -3 and error 1606 got me fed up.
    is the 1606 the error you get on your standalone QT install?
    if so, start here:
    http://docs.info.apple.com/article.html?artnum=93976
    ... being sure to follow up on the InstallShield advice on the 1606 given here:
    http://consumer.installshield.com/kb.asp?id=Q110724
    the InstallShield Tips and Pointers may also prove useful:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • Error code 3 something went wrong with software actuallization my new iphone 5s is not workin anymore

    Need help. I don't know what happened and how to fix it.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Maybe you are looking for