Error code 5100 PIXMA MX472 printer

HELP!!! ASAP!!!
PIXMA MX 472 printer error code 5100.
What do I do?

Hi hump1276,
To try and resolve the error, please follow these steps:
1. With a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.
2. Look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.
3. Remove and reseat all of the ink cartridges in the printer.
Once the above steps have been performed, if you still experience the error, please try cleaning the encoder film of the printer by following the steps located at the link below:
PIXMA MX472 Cleaning the Encoder Film
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Error code 20600 when starting printer monitor ImageprografIPF5100 (canon)

Recently I bought a new MacBook Pro including OSx 10.8.2
I'm a photographer and use a Canon ImageprographIPF5100 to output my work.
I set up my new computer with help of the TimeMachine so I have completely the same environment as on my old MacBook pro running OSx 10.6
When I connected my printer it was clear that the current driver was not going to work on 10.8. On the Canon USA site I found the driver for my printer working on OSx 10.8 and installed it. The printer is connected to the computer with the USB port.
Right away it was clear something is wrong; after installing the driver the software asks me to point out the printer in a list, but the list is empty. After starting the printmonitor I get the error message "Error Code 20600 Failed to iniotialize communication module"
Looking at other discussions on this site I figure the old driver has not been completely whipe'd from the system. Is there someone who knows what to do?

The first action is to remove the current iPF5100 printer from Print & Scan.
Next action is to remove the supporting driver files. Open Finder and select Go > Go To Folder in the menubar. Then type in /Library/Printers/Canon and press Go. This will take you to the Canon folder where you will see the GARO folder. Trash this folder.
Still in Finder, navigate to the Applications folder and trash the Canon iPF folder (called also be called Canon GARO).
With this done, run the iPF5100 driver installer for 10.8, although if you are in a region that uses A size papers then it would be better not to use the driver from USA and use the following driver from Canon Australia.
http://support-au.canon.com.au/contents/AU/EN/0100489102.html

What does the error code -41004 mean in print report.vi?

I am getting the following error in the Print report.vi.
Error Code : -41004
Error Scource : Print Report.viPrint_VI_Image.vi

Hi
I have attached the main vi which is using the NI-Print Report.vi.
I have also attached the image of the error desciption I got.
Attachments:
OPG_Print_to_PDF.llb ‏94 KB
error.bmp ‏273 KB

Negative error code when trying to print from Linux OS

What does a negative error code mean when trying to print from Linux OS.
Terminated with error: REP-50157: Error while sending file to printer apps_dev. Exit with error code -1
It is Oracle Application Server 9.0.4 on Redhat Linux when I'am directly sending the output to the printer.
Thanks for the help in advace.
-P

Reinstall or update your Lexmark printer driver.

Error code 0XB80ACAA8 on my printer, when trying to connect to my router

Dear Support, I bought the printer 2 weeks ago. It worked perfectly, but since today I get the error code 0XB80ACAA8 when I try to connect to the Router. Can you tell me where the code stands for and what to do in order to resolve this?

Hello, Please try the below steps. remove the cartridges.Unplug the power cord from back of the pritner.power Off the wireless router.Wait for 60 seconds.plug in the power cord to the printer only.install cartridges when prompted.If issue still exits, its time to replace the printer.Now power on the wireless router.If issue still exists, then check if there is a firmware update for the router. Also change the router settings Channel = 11, mode= B/g. Frequency = 2.4 GHzIf issue still persists, then its time to replace the printer. Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

Error code B200 for Canon printer MX459

My Canon printer MX459 just keeps giving me the B200 support code every single time i turn it on

Hi jeraldmo,
If resetting the printer did not resolve the B200 error, the printer will require servicing. Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error code when trying to print:126

Problem printing from a lexmark Z601
I keep getting Can not load Library "LXBCPRP.DLL". Using default:126

Reinstall or update your Lexmark printer driver.

HP Deskjet 3520 Printer Error Code OXB0259858

I have horizontal streaks on my prints. When i try to print a Print Quality Report page I get this error code. I've reinstalled the driver and reinstalled the cartridges. I've reset the printer. Any help?

Hello it1305,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I am sorry to read that you are seeing an error code and also having print quality issues with your Deskjet 3520. I will certainly try to help you!
I have a couple of suggestions for you to troubleshoot, however, if the issue persists I would then recommend calling HP's Technical Support to see about your other options.
First of all, try this guide to reset your printer: An Alphanumeric Code (Example: '0x......' or 'C2......') Displays on the Front Panel When Printing
Then try this guide for the print quality problems: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
HP Contact Info:
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8610 - Error Code: " 0xc19a0013" (missing or failed printhead)

I purchased the printer (HP Officejet Pro 8610 e-All-in-one printer) in January, 2015. The printer functioned properly - copy, fax, and scan, until two days ago. Now, it does not print at all. Received an error code: "0xc19a0013" (Missing or Failed Printhead). An expanded version of the error code reads: "The Printhead appears to be missing, not detected, or incorrectly installed. Error Code: 0xc19a0013. The printer uses a removable printhead, HP Ink Cartridges 950 (black) and 951(cmy). I have used HP Support Troubleshooting recommendations: all software and firmware for this printer is installed; the HP ink cartridges are not low or empty; removed the ink cartridges from the printhead and reinstalled them.
There are multible steps in the troubleshooting recommendation, but I stopped at removing the printhead. Because of my technical inexperience, and there were too many ceveats (beware, caution, proper reinstallation, and etc.) with removing the printhead that could cause greater problems. So, I stopped at removing and cleaning the printhead. Also, used the HP Printer Scan Doctor for assistance. The tool for cleaning the printhead doesn't work. What troubles me most with the 0xc19a0013 error code is its explanation: The printhead appears to be missing, not detected, or incorrectly installed. I can use all the help I can get to understand what is going on with the error code that I have received, and how to resolve the malfunctioning printer.
This question was solved.
View Solution.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

0x61011bed error code

Error code 0x6011bed appears after the printer completes a print and to enable the printer to print again requires many button pushes on the message display of "OK."   I have powered down the Officejet 7500, unplugged the power, waited a minute, removed and reinstalled the ink tanks and the printhead, vacuumed and blew away visible dust but still can't make the error go away for very long, with the error code usually returning after any print job (print or receipt of a fax). What additional step or cleaning need I perform to get more that a single print job after the error code clears? Additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task but getting is started after the error code appears is the problem.

Hello , I understand that you're getting the message '0x6011bed' on the front panel of your HP Officejet 7500A Wide Format e-All-in-One Printer. I would like to assist you today with resolving this issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. Now, there are different variations of '0x' error codes. Some error codes indicate print system failures within your printer. Others may indicate a Firmware Programming issue within your printer. For the error code that you're seeing, you may also see an additional message on the display of your printer that may alter what troubleshooting steps need to be completed. Therefore, I am going to provide you with the two methods of troubleshooting the '0x' error code you're seeing. Please just follow the steps below that match the exact error code message that you're seeing.   (1) The 0x6011bed error code or message includes the words 'Problem With Printhead,' 'Printer Failure,' or 'Ink System Failure': If you see one of these messages with the 0x code on the printer, can you please click here to access the appropriate troubleshooting steps. Once the support document opens please follow the steps under Step 1, Step 3, Step 4, Step 5, Step 6, and Step 7. Should the error code persist once troubleshooting is complete a replacement Printhead will likely be needed. The Printhead is the part that the cartridges fit into. It controls 'reading' the cartridges and putting ink on the pages. If the Printhead is defective, then the print system within your product is defective.    (2) The 0x6011bed error code does not include the words 'Problem With Printhead,' 'Printer Failure,' or 'Ink System Failure':  If you see just a 0x error code on your printer, and no additional messages, then it is likely that your printer is experiencing a Firmware issue. Troubleshooting steps for this error are limited. Please click here to access the appropriate support document. Once the support document opens you will notice that there is only Step 1 that you can complete. This step would be the Power Reset, which you have already completed. Should the Reset fail to resolve the error code then a replacement printer would be needed. Should you require a replacement I would suggest that you reach out to our Technical Support queue by phone to explore hardware replacement options. HP Technical Support can be reached by clicking on the following link:
HP Contact Support
(1) Once the support page opens please select the country in which you're located. Next, enter your HP model number (C9309A) on the right.
(2) Choose the 'Contact Support' tab at the top and scroll down to the bottom of the 'HP Support- Contact' page to fill out the form provided with your contact information.
(3) Once completed click the 'Show Options' icon on the bottom right.
(4) Lastly, scroll down to the bottom of the page and select 'Get phone number.' A case number and phone number will now populate for you.  Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Error Code 0X02A2C2ED

Hi, I am getting Error Code 0X02A2C2ED on the printer screen. It's an HP Deskjet 3054 with a wireless connection. Anyone know what it means and how to resolve it? Thanks.

Hi @Crankwell,
The error code 0X02A2C2ED is a sign of an ink system failure. Let's first perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
You may find the following document helpful too: HP Printers - 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a '....
If the issue persist, you might consider calling us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My cannon printer Pixma Mx439 has an error code of 5100

My cannon printer Pixma Mx439 has an error code of 5100. I had a paper jam and cleared it, I took out the ink and replaced it, I have no idea of what else to do at this point. Are you able to suggest anything else. My printer is less than a year old, I should have a warranty.
Julie

Hi julieannbean,
Cleaning the timing encoder film of the printer may resolve the issue you are experiencing. To do this, please follow the steps located at the link below:
Cleaning the Timing Encoder Film
If you still experience the same issue after cleaning the timing encoder film, the printer will require servicing.
Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Clearing error code C0000 on Pixma MP640

Is there a secret to clearing my printer of this error code C0000? I have Pixma MP640.
I tried powering down and also unplugging for 15 minutes. Thanks for your input

Hi cdeviney,
The C000 error is a generic internal error code. Unfortunately, it could mean one of many things. To try to resolve the C000 error, please follow the following steps:
1. Turn off the printer and disconnect the power cord and USB cable.
2. Remove paper from the automatic sheet feeder (in the back).
3. Gently pull jammed paper out, if any.
3-1. If paper is visible from the ASF, use both hands to pull the paper out slowly.
3-2. If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
4. If the paper tears and a piece of that remains inside the printer, open the printer cover and remove the paper from inside the printer.
5. Check ASF with a bright light to check for obstructions. Remove any if found. Please view attached image for an example of pacing material.
6. Open the rear cover to check if the paper is jammed.
7. Pull out the cassette and check if the paper is jammed inside the cassette area.
8. Load paper back into the ASF or cassette.
9. Reconnect the power cord, turn on the printer and confirm that the Alarm light is off. (If there was any jammed paper remaining in the printer, the paper may be automatically ejected.)
If the above procedure does not resolve the C000 error, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Pixma MG5420 getting error code 0x80070005 when trying to have my HP laptop connect to wrlss device.

My Pixma MG5420 is on, bluetooth activated. My HP laptop recognizes the printer when in Control Panel-->Hardware & Sound-->Devices and Printer-->Add a Device (only printer in the entire office), but when I hit next, it immediately pops up with error code 0x80070005. Says contact device manufacturer for assistance. Pls. help.
NOTE: I AM noticing it comes up as an MG5400 instead of the 5420. There are no 5400's in the office at all.

Hi AMPP,
The PIXMA MG5420 does not have bluetooth capability; it can only be connected via USB cable or wirelessly over a network.
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have an error message 5100 on my Pixma MP470 what is that?

I have an error message 5100 on my Pixma MP470 what is that?

Dear Jhihath.
Unfortunately, this error indicates that there is an internal hardware issue with the printer.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error code 5100 PIXMA MX472 printer

Similar Messages

Maybe you are looking for