Error code 6 on Rescue & Recovery 4.5

Hi,
Theres a error code 6 on the installation process of R&R 4.5 on a win7 clean installation.
Anyone knows whats the error about?
(C++ is installed)
Regards
W530 2447-2EG W7 x64, T61p 6460-8WU W7 x64, T61 6460-65G W7 x64, T43 2668-F3G W7 x86.

Which version of windows 7 you running? Does it have bitlocker support? Refer to the other thread by mstcrow, that describes the 100mb System Reserve partition, created by windows install if you have Bitlocker support in your version of win 7.
Btw, did the support center tell you how to remove the system reserve partition(which contains windows RE, among other things)?
==
Could you run disk management and post the properties of this partition? If this a System reserve partition(bitlocker), or some other win7 install recovery partition that i am not familar with?

Similar Messages

2106f Error Code after Internet Recovery Attempt

Anyone ever get a 2106f Error Code after Internet Recovery Attempt? What next?
Background: Macbook Pro (late 2011) shows startup progress bar, goes ~ 1/10th of distance, freezes, then goes black after ~2min. Did this:
1. Clean startup attempt (shift)
2. Zapped PRAM (option command P R)
3. Reset SMC, Startup
4. Attempted Internet Recovery process (Cmd R) over ethernet connection, but after several hours, got the -2106F error.
MacBook Pro 2.2 i7 Late 2011

How long were you able to watch this movie before it crashed?
Now is it everytime you boot up, you get the BSOD 0xc0000001 ?
Can you start up in SAFE MODE?
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."

Error code = 0xEFFFF01 - HP recovery manager

Hello
I have made backup of my files through HP Recovery and Backup manager, due to some problems i had with my HP PC. I have reinstalled the PC, and now i want to recover my backup. But when i run the HP Recovery and backup manager through the restore.exe file in the backup folder, on my USB-device, I get an error which says Error Code = 0xEFFFF01, and I can't get any futher in the recovery process. I have tried to find an answer to the problem, without luck, which made my way to this forum. I Hope you kan give me some answers about why i can't recover my files.
Thank you in advance
Andreas

Hi @Jørge
Welcome to the HP Support Forums! I see that you are having some problems getting your backed up files from your USB. I also did some research into that error code and didn't find anything either. Let me start by getting your product number so I know what we are working with. Have you tried all the USB ports? You mentioned that you “reinstalled the PC” by that do you mean you used recovery media to bring the computer back to defaults or did you install it from an installation CD?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Error Code re: Making Recovery Disks

Just purchased an L655-S5075 laptop. I am attempting to make recovery disks, but cannot get beyond disk 2 without receiving following error: D:\ZZImages\ZZImages\Preinst10.SWM, error code 020150-20-00000000. I am using Memorex DVD-R, 4.7 Gb disks. See others with similar issues, but they were successful once the switch was made to a DVD-R disk. What disk format should I use? Does manufacturer make a difference? Why doesn't Toshiba document the recommended disk standard to use to make recovery disks, thus saving consumers countless hours of frustration? I appreciate anyone's assistance.

Hi RAPearson
Question, will this mess up my recovery disk creation? If I make the last two disks, will the first two be compatable?
No, it'll not conflict as only factory settings, programs and windows os are burned.
It does not look like there is a way to restart the recovery disk creation process, or is there?
Here too, its a No. It'll start from where you left. Use good quality DVDs.
Hope this resolves the concern,
Thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Error Code 0x116 when recovery install for dv6-3120ew is made - HELP !!

Hello!!
I have a problem with HP DV6-3120ew with Windows 7 Home Premium 64 and ATI ARDEON 5470 HD.
I decided to preinstalled system to new, so I start recovery procedure.
1) I formatted disk C:
2) recovery start unpack files to disk
3) instalation was start, one reset done
4) after restart HP INstallation start install drivers
So right now Blue Screen swhow with code error 0x00000116 and after that sytem restart - loop !!
all the time restart and blue screen ...
I start procedure recovery two times and this same happend.
I used command line and read that system use ATI drivers 8.741.1.1000.
If I start system in Safe Mode Windows can't finished installation and ask me for start sytem as normal.
When I replace atikmpag.sys for vga.sys for standard VGA drivers I receive info that windows can't finished installtion and I have to start installation again.
When after F8 button I try to use VGA resolution - I see black screen without any errors. But system still using I think ATI drivers just resolution is VGA.
So System doesn't work at all.
Right know I want to replace drivers from ATI to standard VGA, how I can do this ?
BR
Zbigi

Hi @Zbigi ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3120ew Entertainment Notebook and system recovery failing. Here is a link to the Graphics driver for your system.
You will have to recover the system with your recovery disks that you created. Here is a link to obtaining recovery discs.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Windows error message for Rescue & Recovery on T61 6460-D6G

Recently whenever I install any update through Lenovo System Update 5, I get error messages from Windows when I start Rescue and Recovery. To be more specific I get the message that Windows are re-installing R & R followed by 2 more error messages the numbers of which I can't remember.
Seems like the installation of updates corrupts R & R, therefore I restored my system to a point before that installation and now it's working fine.
However I can't install any more updates through Lenovo System Update software without that issue to appear. Need to add that my OS is Win 7 Professional, 32 bit.
Any idea about that?
Many thanks in advance!

You can try updating other programs but not rescue and recover, or try downloading and installing the RnR manually, or try completely removing it first, then installing the latest version manually.
Maybe one of these three ideas may work.
I'd also question if your windows xp installation is stable, these types of problems plagued XP after making a lot of changes, most heavy users just got in the habbit of reformatting their drives and reinstalling when it became unstable. XP can be a good operating system, but once it gets buggered up you get all kinds of unexpected problems and bluescreen crashes. Vista (after the bugs were worked out) and Seven are a big improvment in my opinion.
Good luck and I hope you're able to resolve the issue.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Satellite A80 - Error code 49 during recovery installation

Hi,
I have a Toshiba Satellite A80. The computer crashed. I inserted the Windows recovery disk and error #49 with writing problem showed up.
I wonder what wrong with my laptop. Is it a hard drive problem?
Can anyone help me?
Thanks.

Hi ClementLo,
> error #49 with writing problem showed up.
I dont know when you exactly get this message but theoretically it could be a problem of the HDD. Maybe it has defective sectors and should be replaced
Can you also test the same using a Microsoft disk? Maybe the disk is scratched

Please help: Recovery Manager Error code during system recovery

The notebook is a HP Pavilion dv2000. When accessing Recovery manager after pressing F11 upon bootup and selecting System Recovery it comes up the the screen:
Factory image recovery where is attempts to reformat the windows partition on the Hard drive and reinstall the original content
Within a few seconds of the above mentioned it brings up an Error:
ERROR 0X4001001300001002. If this issue continues contact HP Support.
Rebooting it does not help.

There is nothing other than the power cord plugged in. I did run the diagnostic from the Recovery manager just on the Cwindows partition) and it came back fine. I'm currently running it from the cmos diagnostics to see if it gives me anything different, so far the quicktest came back fine.

IPhone's 3.1.3 firmware cause Error code 9?

Trying to update my phone to 3.1.3 last night and now is throwing error code#9 in recovery mode. Try to recover from different PCs and USB ports, still no avail.
Any ideas???

Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software, as described here: http://support.apple.com/kb/TS3125 .

How do I get rid of error code 2001/2006? My phone is in recovery mode. I have tried several different cords, all USB ports, my macbook, and a friends PC. This is the second time my phone has done this, the first time it was an easy fix.

I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?

Soooooooo.... You obviously need to restore the device
It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
Hope this helps!!

Lenovo G560 OneKey Recovery 7.0 error code 0xEB1b068A

Hi
I recently purchased a Lenovo G560. First I turned it on I've tried to create DVD recovery (Default factory discs) but this error occured during the process: Failed: error code 0xEB1b068A. the softwar I used was neKey Recovery 7.0.
I had tried it twice but it wasted me two DVDs already. I looked up on the web and I've notices that it's a common problem of the lenovo think-pad computers.
If any one has the same problem that he resolved or if there is anyone who knws something about the issue please post your answers.
Thank you
Solved!
Go to Solution.

Admin note - this discussion had been combined with other discussion on OKR, but since this error code is specific and we have several different discussions already with different potential causes, it may be worth keep this one separate so that we can hopefully arrive at a specific solution on this case.
Pooryamd,
Thanks for your suggested solution based on that KB article.
We've seen this error code come up a couple times year, and one scenario had to do with changes to the partition sizes.
So, aklee13, did you change any of the partitions?
Another reason for the errror code might be that you are not running as the administrator on the system - if you have multiple user IDs on your system - if you are sharing the PC with someone else and have a log on for them. Try right click and run as administrator.
Searching a bit, I find same error code reported for ASUS system, so this doesn't seem to be a Lenovo unique issue, maybe something underlying in Windows. Not assigning blame, just saying that there may be somethign going on that isn't specific to One Key Recovery.
Can you tell us a bit more about your system and situation. Have you made any changes to the system since you got it? What kind of DVDs are you using? Brand and type.
The more you can share with the community, the more we can help.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

TS3694 Just took my 1st gen iPod out of it's original box, never used before. Plugged it into my new Mac book Pro and it recognizes that the iPod is in recovery mode but when I click to restore, error 1611 comes up - but that error code doesn't say what

I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up. Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc). Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10. But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try. The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine. I also tried a different USB port on the Mac Book. Any ideas?

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your time

This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

Ipod touch stuck in recovery mode and will not restore. error code 3194

ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it.

My ipod Touch is in recovery mode, has error code 6

My iPod Touch (from 2009) has ceased to function.Mine
video files and music vanished when I made a
iPod update software, it stopped working
completely.Can not do factory reset because itunes
says that iPod is in recovery mode.
I must, accordingly to itunes first restore the iPod before
I can use it with itunes.
I received error code No 6.The only thing iPod screen displays is
a picture of the itunes symbol and a cable connector
connecting via usb.
How do I restore my iPod Touch?
I have Windows Vista and the latest version of iTunes.

From the article cited at the end of my post:
Error 6: All of the steps in this article apply to resolve this issue. Following iTunes for Windows: Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
http://support.apple.com/kb/TS1275

Error code 6 on Rescue & Recovery 4.5

Similar Messages

Maybe you are looking for