Error code#6 while burning cdr

always was able to burn. Now if I put more than a little amount burn fails with error code# 6

Hi Skinner,Welcome to Apple Discussions.
Firstly you can't burn DVDs from iMovie!
Under OS 9 Error 6 was an overflow error, although I can't confirm its the same under OS X it sounds like it could be a buffer overflow issue in iDVD. This would mean that the computer cannot supply the data to the drive quickly enough. Try the following things (which admittedly are undesirable but may be neccesary):
Close down all Applications not directly involved in what you're doing to free up processor time and memory.
Burn at a lower speed (choose 1x or 2x rather than 4 x).
Try different media those PC World branded disc may not be as good as a Verbatim.
Hope this helps
mrtotes

Similar Messages

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

An error occurred while burning the disc.

I tried to burn some stuff onto a DVD today with my PowerBook. Here's the info on the burner:
MATSHITA DVD-R UJ-845E:
Manufacturer: MATSHITA
Model: MATSHITA DVD-R UJ-845E
Revision: DMP2
Serial Number:
Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
I bought some DVD's on sale at Radio Shack, and when I tried to burn a movie and a few photos onto a disc, the progress bar showed it starting to burn, then it stopped and I got this message:
"An error occurred while burning the disc. This disc cannot be used."
A little research here at the Apple forum brought me to this site:
http://www.digitalfaq.com/media/dvdmedia.htm
And after downloading a little program called DVD Media Inspector, I was able to classify the DVD's I had bought as:
"4TH CLASS MEDIA:
Pathetic garbage media, landfill material, about 0-50% success rate...."
OK, off to Mega Lo Mart, where I bought some nice, expensive Maxell DVD's.
Media Inspector doesn't see my fancy new DVD's. When I try to burn stuff using the Finder, I get the same result as before.
Getting desperate at that point, I located and downloaded updated firmware for my model of Matshita superdrive. I'm not sure what firmware is, and there was a free range one and a standard one, so I went for the standard one. There were dire warnings in the readme file about "flashing" a superdrive being on the same risk level as open heart surgery. I flashed my superdrive. (You can say that here, and it's not dirty.)
I also tried burning using iDVD, and after much preparation, it started to burn, then spit out the DVD. I tried three of the landfill DVD's and two of the Maxell ones. I'm out of things to try. Any ideas?
I have never tried burning DVD's before. Am I doing something wrong?

I tried again using iDVD's One-Step DVD making feature. It will let you make a one step from a movie file, and I had a .dv version of the movie I want to burn.
It encoded video for a while, encoded audio for a little while, then started to burn. The superdrive made some noises, then the DVD was ejected and I got an error message saying:
"Burning Finished
Errors were found during the burning process"
I hit OK (though it really wasn't OK) and got another error message box. This one said:
"Multiplexer error
(some message about multiplexing problem)"
The message didn't make sense to me, and I was unable to remember it. What's a multiplexer? I would have guessed an avid movie-goer, but somehow I think that is not it.

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

I am unable to install itunes in my windows 7 laptap. Getting 2349 error code while installing itunes. Any suggestions to overcome?

Is this the error your gettings?
If so, remove the installer, and redownload the itunes set-up installer
www.apple.com/itunes/download
Message was edited by: keeferaf

I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space. What does this mean?

I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space." What does this mean?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

HT5052 I keep getting an error code while trying to upload the IOS 5.1 update to my Ipad 2

I keep getting an error code while trying to update my Ipad2 to iOS 5.1
I have tried though syncing to my Mac and by itself

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart.
Then try to update at Settings > General > Software Update
The update servers have been extremely busy this week so keep trying. It took me several attempts before my iPad began the update process.

How to fix error 4450 while burning cd

how to fix error 4450 while burning cd

This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

Error 4850 while burning, after upgrading to 10.1.2.17

Hi guys I'm suddenly encountering error 4850 while trying to burn either an audio or mp3 CD. Burning a data cd seems to work fine. This just started happening I'm assuming because I upgraded to itunes 10.1.2.17, I've burned hundreds of CDs with no problem before the upgrade (altho I've had this problem once before after an upgrade about a year ago)
Any help would be greatly appreciated
Matt
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
HP-Pavilion AY747AA-ABA p6310y
iTunes 10.1.2.17
QuickTime 7.6.9
FairPlay 1.10.24
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.1.3
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number F5BADCC543E06108
Current user is not an administrator.
The current local date and time is 2011-02-13 21:18:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9100
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.1.2.17 (x64) is currently running.
iTunesHelper 10.1.2.17 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD-RAM GH40L, Rev RB0E
Audio CD in drive.
Found 16 songs on CD, playing time 60:07 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:56:37
Track 3, start time 07:23:20
Track 4, start time 10:57:07
Track 5, start time 14:31:25
Track 6, start time 19:12:65
Track 7, start time 22:06:67
Track 8, start time 25:46:05
Track 9, start time 29:34:67
Track 10, start time 33:38:65
Track 11, start time 37:11:05
Track 12, start time 40:46:20
Track 13, start time 44:25:10
Track 14, start time 48:04:62
Track 15, start time 52:17:05
Track 16, start time 56:39:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4850(0x000012f2). It happened on drive E: hp DVD-RAM GH40L on CDR media at speed 8X.

I am having the same error message displayed for my diagnostics run. Cannot burn any CD's. Is it even possible to burn CD's w/ iTunes?

Error 1951 while burning disc

I have been trying to burn a DVD-R of music but keep getting this error. I ran the diagnostics tool and it gave me this:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Inc. Inspiron 9300
iTunes 7.3.1.3
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.20.0), PFC (2.5.0.204),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce Go 6800
Connected Device Information:
Disk drive, TOSHIBA MK8026GAX, Bus Type ATA, Bus Address [0,0]
CD-ROM Drive, SONY DVD+-RW DW-D56A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Audio CD in drive.
Found 8 songs on CD, playing time 43:46 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 01:45:67
Track 3, start time 08:09:24
Track 4, start time 09:23:10
Track 5, start time 18:17:11
Track 6, start time 19:45:24
Track 7, start time 35:11:16
Track 8, start time 37:12:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed data CD or DVD burn had error code 1951(0x0000079f). It happened on drive D: SONY DVD+-RW DW-D56A on DVD+R media at speed 0X.

I had the same, Error -8785, error while writing an MP3 CD. I found this post during a Google Search: http://lists.apple.com/archives/quicktime-api/2007/Apr/msg00110.html . Some of the names on the tracks, and the comments were very long, so I shortened them. Then it worked.
I hope this helps.
Regards, Nic

Error -8785 while burning disc 2 of 3 during Back Up to Disc...

I regularly back up my iTunes library to DVD media-i hadn't done it in a few months and when I went to do so today using regular HP DVD+R discs that I've used before for this, the first disc burned fine (I needed three discs total, per iTunes). Discs 2 and 3 immediately failed with a -8785 error code. I restarted my MacBook Pro and used different discs, and keep getting the same thing. It looks like iTunes is fine with the first disc I burned as backup since it now says only two discs are required for the incremental backup. But I can't backup my iTunes library to disc (apart from, say, data discs). Disc 1 in this series, incidentally, was disc 30 for my collection, so I'd like to keep it going. I'm using iTunes 10, but I don't think that's the issue, since the first disc burned fine. Suggestions? Thanks.

I had the same, Error -8785, error while writing an MP3 CD. I found this post during a Google Search: http://lists.apple.com/archives/quicktime-api/2007/Apr/msg00110.html . Some of the names on the tracks, and the comments were very long, so I shortened them. Then it worked.
I hope this helps.
Regards, Nic

ORA-00600: internal error code while inserting data in table

hi gems..
i am getting the below error while inserting data in a table...
*ORA-00600: internal error code, arguments: [kqd-objerror$ ] , , [0], [98], [BIN$sm1O+fYhF1jgRAAhKNYyZA==$0], [], [], [], [], [], [], []*
i can select the table absolutely but cant insert datas(but this is the schema owner and so datas should get inserted)
i have checked the alert.log...the entries in last few lines are like this:
<msg time='2011-11-25T03:08:55.763+05:30' org_id='oracle' comp_id='clients'
type='UNKNOWN' level='16' host_id='ICS167DOR'
host_addr='10.184.134.139'>
<txt>Directory does not exist for read/write [oracle/ora11g/app/ora11g/product/11.2.0/dbhome_1/log] [oracle/ora11g/app/ora11g/product/11.2.0/dbhome_1/log/diag/clients]
</txt>
</msg>
please help...thanks in advance
Edited by: user12780416 on Nov 25, 2011 3:29 AM

hi...
finally i got the solution...i know that this problem may occur due to some other reasons also for different users...but the problem which caused the developers facing the error in this case is below:
they faced the error while importing the dumps in the server. at the same time the application developers told that they can select the tables but cannot insert any datas.
after listenning to this, i assumed that this may be a space problem with the system tablespace as it is responsible for storing the data dictionary.
i asked for the free spaces for the system tablespace and got the reason. It has only 0.2% left.
i told them to issue the resize command for the system01.dbf datafile(allocated 2GB more) and the problem got resolved.
Hope this helps..thanks

ORA-00600: internal error code While trying to view cube

While trying to view cube, i encounter the following error
oracle.dss.dataSource.common.QueryRuntimeException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
oracle.dss.dataSource.common.OLAPException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
at oracle.dss.dataSource.common.QueryDataDirector.addDataDirectorListener(QueryDataDirector.java:795)
at oracle.dss.dataView.ModelAdapter.setDataDirector(ModelAdapter.java:173)
at oracle.dss.crosstab.CrosstabModelAdapter.setDataSource(CrosstabModelAdapter.java:54)
at oracle.dss.dataView.Dataview.setDataSource(Dataview.java:396)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.getCrosstab(Unknown Source)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.showCrosstab(Unknown Source)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.showData(Unknown Source)
at oracle.olap.awm.navigator.node.olapi.UCubeNode.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
This is with a simple cube with only one dimension. i had created the same cube earlier with 10 dimensions but same error occurred. i felt it had to do with my setup of the cube. I have recreated the cube a couple of times with different names but same error exists. interestingly all dimensions are viewable after maintenance.
I am begining to doubt the efficacy of AWM + oracle OLAP in use for a production environment. i have been at this for quite some time but no solution yet. please i would appreciate anyhelp

Have you ever had any cube working in this environment? yes. i had created multiple versions of the same cube with fewer dimensions. I had created a cube (USAGE) with 5 dimensions, it worked. I later created same cube with 10 dimensions, that was the Genesis of the error. i had exported the eif file, deleted the awm, reimpored the awm, same errors. recreated the cube same error. i even tried recreating the cube wih one dimension but the same error persists.
database is Release 11.1.0.7.0
AWM standalone client :awm11.1.0.7.0B

500 Error code while consuming web service using HTTPURLConnection

Hi,
I am getting an HTTP response code 500 and an IOException when I run a web service client to invoke a BMC Remedy web service (document based). I am using XML over HTTP to hit the web service as follows:
// For Remedy
soapAddress = "http://www.test-sislhelpdesk.siemens.co.in/arsys/services/ARService?server=bomw041a&webService=WebService_Test";
soapEnvelope = "<SOAP-ENV:Envelope xmlns:SOAP-ENV=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\"><SOAP-ENV:Header><AuthenticationInfo><userName>webservice</userName><password>*******</password></AuthenticationInfo></SOAP-ENV:Header><SOAP-ENV:Body><Q1:OpGetList xmlns:Q1=\"urn:WebService_Test\"><Q1:Qualification></Q1:Qualification></Q1:OpGetList></SOAP-ENV:Body></SOAP-ENV:Envelope>";
soapAction = "urn:WebService_Test/OpGetList";
     URL url = new URL(soapAddress);
     HttpURLConnection connection = (HttpURLConnection) url.openConnection();
     System.out.println ("Connection got");
     connection.setDoOutput(true);
     connection.setRequestProperty("Content-Type","text/xml");
     connection.setRequestProperty ("soapAction", "\"" + soapAction + "\"");
     OutputStreamWriter outputStream = new OutputStreamWriter(connection.getOutputStream());
     System.out.println ("outputstream got");
     outputStream.write(soapEnvelope);
     outputStream.flush();
     BufferedReader reader = new BufferedReader(new InputStreamReader(connection.getInputStream()));
     String line = null;
     while ((line = reader.readLine()) != null)
          writer.write(line);
          writer.write("\n");
     System.out.println (writer);
     catch(Exception e){
          e.printStackTrace();
I have created a .NET client proxy which seems to work well.
I am not able to figure out as to why this code is not working. May be something wrong with the SOAP message request I am sending? But I have created this SOAP request message from the log generated for a successful hit. Any help in this regard will be highly appreciated.
The web service is on the internet and hance is accessible to all :)
Regards
Vaibhav

Tried "POST" request method, did not work.
Actually when i hit other web services (created by me) , the code works.
But when I hit a third party web service, it fails returning 500 error code.
How can I extract the SOAP message returned, if any and see thinggs for myself.
I guess there is something wrong with the request SOAP message which I am sending.

I get an error code when burning a movie to DVD

I use Premiere Elements 10 in my iMac OS lion vers. 10.7.2
I have 250 Gb free on my hard disc. The movie I try to burn is between 3-4 Gb
When starting to burn my movie to a DVD the following is seen in order on the screen:
Encoding Menu 2 of 2
Computing Media
Burning disks 1 of 1
and then it burns (at the end pretty quickly) to 99% and stay there.
I get an error code:
Internal software error: /Users/labuser/premiere/elements/molecules/pre10-bullseye/molecule-17/External/AuthorScri pt/Source/DVDCreator/FormatLib/Ma.....
When I look on the DVD, it looks like nothing has been burnt to the DVD.
What can be wrong?
gardie10

I still have trouble with burning my movies to DVD.
Have tried the following:
Found that I had "-" in many of my file names (clips). I removed them from the file names, but this had no effect.
I moved my entire project folder to a shorter path folder. This had no effect.
I have not managed to find blank DVDs on sale here in Gothenburg, but will try to buy them online.
I have four movies that I want to burn on DVD discs.
Have succeeded in burning two of them.
I've tried to find what distinguishes between the two that are OK and the two that I have not succeeded with. They are all at about the same size, about 27-29 minutes long.
The clips are .m2ts and .mts files.
In one of the movies that are OK, all the clips are .m2ts files. In the second movie (that is OK), most of the clips are .m2ts files, but also there are .mts files.
In the other two movies that are not OK, it's a mix of .m2ts and .mts files.
When I try to burn the two movies which failed, I get the same course as I showed earlier (with an error code).
I must admit that I was wrong when I previously wrote that I could burn all the movies to my hard drive. The ones I can not burn to DVD, I can not burn to my hard drive.
gardie10

Error code#6 while burning cdr

Similar Messages

Maybe you are looking for