Error Code 79 on Laser Jet Pro 400

Have not had printer long......   Keeps giving message Error 79  it is a all in one Laser Jet Pro 400!!!!!!

Hi All,
I found and would like to share one of the root cause of the error in my network.It is caused by unsuccessful printing process of one or more computers in the network. I could have fixed the error 79 with the following few steps.
1.Turned off power of the Printer
2.Check and Remove printing process from every computer that can have access for the printer in the network.
3.In domain network, you cannot cancel the printing process check the owner in "See What's Printing" box
4.Then log in with that account and try to remove
5.If you cannot still cancel the printing process you have to remove and add the  printer again.
After doing this steps on every computer, having access to the printer, in the network, you can switch on the printer and it should be working well.
Omar-E wrote:
@Kasba 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar

Similar Messages

  • I cannot print PDF documents on my new laser jet pro 400 451dn

    when printing a pdf document, the printer keeps saying searching for printer.  this happens all the time with PDF documents and some times with Word documents.

    Hello,
    Have you checked the settings in software under print settings? Also you can go into the sriver settings in Devices and Printers ans check the settings there. Try ptinting a test page from another application to see if it is a printer issue or applicaton issue.
    Thanks,
    Say thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee

  • Transparency for laser jet pro 400 m 401n

    what is the best transparency to use on this printer?? is there a specific make or manufacture that is recommended?
    hp is no longer in the transparency business.
    also, i noticed that after i print a transparency...the toner rubs off when touched.. please advise on this...

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Laser jet pro m475 won't print through the wire

    Hi laser jet pro 400 as just decided it's going to print anymore through the wire. Tried three different wires no good. It says not communicating with printer. Tried others computers and it the same.
    Any ideas
    Thanks Craig

    Digcon,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Laser jet pro CM1415 will not send or receive faxes

    I just bought a MAC OSX 10.9.5 and downloaded upgrades for my laser jet pro CM1415fnw printer plus the firmware upgrade from HP website. The printer will scan and print but will not fax. we are set up for wireless and I have spent the last 2 days trying to figure this out. The message says that no phone line detected. ??? This printer worked perfectly with my old MAC computer but is bing very obnoxious now.
    Thank you for any help you can give me. collette

    Hi @dumtech ,
    I see that you are unable to fax with the new Mac using 10.9. I can help you with this.
    Did you mean you downloaded and installed the Full Feature Software drivers?
    HP LaserJet Pro CM1415 Color Multifunction Printer series Full Feature Software and Drivers.
    Are you trying to send a fax from the Mac or from the printer's control panel?
    If you can't fax from the Mac, try the following:
    Check to see if the fax driver is installed.
    Click the Apple menu, and then click System Preferences.
    Click Printers & Scanners.
    If not, the + sign.
    Select the printer from the list.
    Beside USE: make sure it lists the printer's name only/fax.
    Click on the add button.
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name also.
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Try faxing again.
    If you can't Fax from the Printer, please try these steps:
    Make sure you are using the 2 wire fax cable.
    Run this test for the fax.
    From the Home screen, touch the wrench button.
    Touch the service button.
    Touch the Fax service button.
    Touch run fax test.
    You should get 4 passes.
    Turn the private receive off:
    Go setup/fax setup menu/advanced setup/private receive/turn it off.
    Turn off the error correction:
    Go setup/service /fax service/error correction/turn it off.
    Change the fax speed to medium:
    Go to setup/fax setup /advanced setup/fax speed/change it to medium.
    Clear the saved faxes:
    Go to setup/service menu/fax service/clear saved faxes/OK to clear.
    If you are still having issues, then please follow the steps in this document.
    Cannot Send or Receive Faxes.
    Can you fax from the printer?
    Was the fax and printer driver both installed?
    Were you able to fax from the Mac?
    Please provide in detail the results if you are still having issues.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • All in one HP Laser Jet Pro 200 Color MFP (M276n) stopped working

    I have an HP Laser Jet Pro 200 Color MFP (M276n) that I had installed and woking fine. 
    I changed my desk and removed the USB from the computer and when I plugged it in again i could not print or use any of the functions through the computer. I'm running 64bit Win 7. 
    I've tried unistalling the printer and downloading the laster driver package from HP.com.
    But when I try installing it and come to where the installationprogram want me to connect the USB-cabel the printer doesn't show up (I can't click "Next" to begin installtion).
    So right know I cant print and I can't reinstall the printer. 
    How do I fix this??

    Make sure the usb cable is plugged in properly, the right port at the back of the printer. If still doean't work, maybe get a new usb cable?

  • How to print envelopes hp laser jet pro mfp m225dw

    Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw?  Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

    Hey @Shaggs,
    I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
    Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
    Loading Plain Paper and Envelopes
    Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
    What's my OS?
    How to Print Envelopes from Word:
    1. Open Word and click on Mailings at the top
    2. Select 'Envelopes' from the top left hand side
    3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
    4. Select 'Options' on the bottom right hand side.
    5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
    6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
    7. Make sure that you choose the 'Face up' option.
    8. Also ensure that 'Clockwise Rotation' is not selected.
    9. Hit 'OK' and 'print'
    Here is a video for additional instruction:
    Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Laser jet pro 200 will not copy

    Hi, I have had my laser jet pro 200 for at least 6 months and only used it as a printer.  For the first time today I tried to copy something and I got  a blank piece of paper.  I tried the flat bed as well as the feeder and same result.  Hopefully there is a setting I missed.  Any thoughts?
    This question was solved.
    View Solution.

    HI Brian_D_H,
    Thanks for posting what you've done so far, based on that - I've been able to find some troubleshooting guides for you to follow:
    Troubleshoot Copy Quality Problems
    Troubleshooting Print Quality Issues
    If those don't help, and the toner isn't depleted, you'd be best to call tech support for more help. You can contact HP support in North America at 1-800-474-6836 or find the local telephone number for your country here: http://welcome.hp.com/country/w1/en/support.html Please look for the category "Technical Support After you Buy"
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

    error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed?  how???  seems to not power up ...thanks..

    Hello
    Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp​...
    To try to get it in default mode
    Kind regards
    Best regards,
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    Although I work for HP my posts and replies are my own .....

  • My Laser Jet Pro CM1415fnw color - will not print ... WILL let me fax...

    My Laser Jet Pro CM1415fnw color  - will not print ... will let me fax... then it goes to a screen like it is thinking ....the screen shows HP.... enerystar.... and a white bar on the bottom ...then it "initializing"  and acts like it wants to print something. Help

    Does the printer ever come to "ready" or Home screen? If it does not then i would recommend calling support and they may be able to help you with restoring the device to factory settings. If this is constantly occuring every time you boot you may want to try upgrading the fw to the latest version. Also if it is just showing "Calibrating" very frequently in the Embedded WebServer (EWS), navigate to IP if you have it, in the "System" , "Print quality", you can can change the calibration timers and see if that helps.
    I am an HP Employee.

  • Laser Jet Pro CM1415fnw color will not print from eprint

    Laser Jet Pro CM1415fnw color printer will print from laptop but not from email. Signal on printer has strong internet connection and so does computer.  I tried to send a pic with my phone but it did not print.

     I will need a little more info in order to help out. If you send the printer an ePrint of a text document, will it print that plan document? Also, if the picture that you are sending is less than 100 DPI (dot per inch) the printer will not print that because of the quality. You can send the picture to the computer, open it and the right click on it and look under “properties” and it will give you the DPI information.  It is labeled vertical and horizontal resolution. Lastly, what type of phone do you have? What email client are you using to send the picture to the printer? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • How do I set up the HP web services on my laser Jet Pro 200 color MFP 276nw?

    I am trying to be able to print on my Laser Jet Pro 200 color MFP 276nw printer from my Galaxy Note 10.1 and am instructed to set up HP web services.  I need some help to know how to do this.

    Hi,
    Please try a print app such as HP ePint on your Galaxy:
        http://www.hp.com/united-states/campaigns/mobility/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Laser Jet Pro MFP M127fn

    I downloaded windows 10 and now my laser Jet Pro does not workcan you please help me with thisMargie

    Hey ,  Welcome to the HP Support Forum.  I see that your HP LaserJet Pro MFP 127fn has ceased working from PC since performing a Windows 10 update.  I would like to help you with this.  My guess is that this loss of functionality can be attributed to the fact that no Windows 10 driver has been released for your 127fn.  Having said that, I have had some success in reloading Windows 8.1 printer drivers on 10 setups.  I recommend you try the following steps:  Press the Windows key + r and type control panel in the box that pops up. Press Enter. Click on the Devices and Printers folder.  If you see your 127fn in there, right-click on it and remove/delete the printer. Go back to the Control Panel. Click on the Programs and Features Folder (might appear as Apps and Features).  Look for your printer's software and uninstall it. Once that's completed click here and install the 8.1-friendly driver for your printer.  Follow the usual prompts to complete the setup. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!  

  • "Error Code -50" when moving macbook pro?

    Hello!
    I'm having an issue that I can't exactly find anywhere else. Starting in August or so, my hard drive started having issues with error code -50, almost always when I moved the computer suddenly (setting it on a table, standing up with it too quickly, etc) or not-excessively-gently, although occasionally it happens without any movement. The computer still functions fundamentally "normally," but I can't use the internet (probably because the cache can't be accessed) and I can't open or save files. The issue corrects itself when I restart the computer, and probably repeats itself a few times a week.
    It didn't start happening until I replaced my 320gb hard drive with a 500gb one and upgraded my 4gb RAM to 8gb at the same time. Thinking it was the hard drive, I took it back out and replaced my original hard drive, but the problem persisted. I did not try replacing the new RAM back with the original, but could bad RAM even contribute to the problem?
    Thank you!

    CLICKY CLICK----> Negative Value Error Codes
    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    Mac OS X (10.6.1)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • Error code 242 on Office jet 8600

    Office Jet 8600 quite accepting fax's. Error code 242, but fax test show all connections are good.

    Hi @Skylek
    According to the following document, error 242 means the remote fax machine is attempting to receive instead of send. Both machines have attempted to start a reception at the same time. On many fax machines, it is possible to accidentally initiate a fax reception in the following cases:
    There is no paper in the machine.
    The paper is not correctly loaded and the document sensor cannot sense it.
    Interpreting Error Codes in Fax Communication Error or Fax History Reports
    Recommended Solution:
    Contact the sender to make sure that a document is ready and correctly loaded in the sending fax machine. Also make sure that the remote machine is attempting to initiate a transmission and not a reception.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for