Error Code (9) when upgrading to iOS 6

Last night I downloaded the iOS 6 software to my iPhone 4 (without connecting to iTunes). This morning it had apparently restarted, showing the 'connect to iTunes'-symbol on the display. Doing that, iTunes downloaded the software (again?) and came up with the message that an iPhone that needed to be restored was connected. I tried to restore, but now I get the message that the iPhone can not be restored, an unknown error occured (9). It is translated from the Danish error message, so it may not be completely correct.
Error code 9 is something with the USB connection, so I tried everything Apple support says about this without any result: http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US#error9 I tried on a different USB port, with several different cables, on a different Mac... All with the same result. iTunes keep saying that the iPhone needs to be restored and then prompts that this is not possible. So now the phone is 'bricked'.
There are no Apple Stores in Denmark, so I am stuck with my vendor (TDC) who just have the message that they can take it in for three weeks, but if it says it needs to connect to iTunes they will do nothing about it beacause it is my own problem and I have to follow Apple's instructions...
Does anybody have a clur about what to do in this situation? The phone worked perfectly fine before and I even backed it up via USB earlier yesterday, meaning there are no hardware problems as such and no problems with the USB connection.
Thanks!
/Jesper

Yup. would be nicew to hear from Adobe on this. Ovcer the past several months I hav e tried to install the 12.0.4 update and keep getting the same error code others are getting.Wha
zzup Adobe?>

Similar Messages

  • Getting error code 3195 when upgrade my Ios.

    Dear All.
      I am getting error code 1395 when ever i am trying to upgrade my iPhone4 version 4.3.5 to iOS 5. I am useing Itune latest version 10.5.
    Kindly help me out.

    Do you get this error in Windows? If yes, according to this article,,  http://www.sydown.net/fix-error-1395-patch-for-error-1395 , you'll have to update your Windows software.

  • Error code 1667 when upgrading to iOS7

    i had error code 1667 when upgrading my iphone and ipad to iOS7 and found that i did not have sufficient memory. I freed up space on both devices and iOS7 immediately installed

    Yup. would be nicew to hear from Adobe on this. Ovcer the past several months I hav e tried to install the 12.0.4 update and keep getting the same error code others are getting.Wha
    zzup Adobe?>

  • Error Code: U44M2P20 when upgrading CS5, with Illustrator CS5 15.02

    Recently I got the message to upgrade my Adobe Creative Suite (CS5) Production Premium.  However during upgrade three components failed:
    1.     Extension Manager 5.5
    2.     Adobe Illustrator CS5 15.0.2 and
    3.     Pixel Bender 2.5
    I got the message to upgrade these components again today and the upgrade again failed.
    I then downloaded the actual upgrades and tried to manually upgrade but it again failed with error code U44M2P20
    when I looked at the error code I get the note:
    Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell
    however, I currently have Adobe Illustrator 15.0.0 and Pixle Bender toolkit 2.0 installed and working.
    how can I either upgrade or stop the upgrade messages from coming up.

    I am getting the impression that you should be saying "update" instead of "upgrade"
    If the Adobe Application Manager is involved in these messages about updates then what you can do is adjust the preferences to no longer check for updates for the troublesome program updates.

  • Error code 6 when updating to iOS 7

    Hi, I have a fairly new iPhone 4S which had behaved impeccably, bur when I came to update the iOS to 7.0, through iTunes, error code 6 was returned.  I had to restore to factory settings, which gave me the new iOS and then I had to restore all apps etc from my last back up.  The same thing happened when I updated to iOS 7.02.  I have an iPhone running the latest iOS and it's working fine, but if I have to do this everytime there in an incremental iOS update it's going to be really annoying having to set the iPhone aside for a few hours rather than a few minutes.
    I've read the Apple Support docs realating to error code 6 and can't really make any sense of it.  Also, it's predominantly aimed at Windows users.
    Can anyone help me?

    Hello Phillips, this error usually has to do with Jailbroken iphones, just need to go into DFU mode then restore and update. Hope this helps.

  • Error code 3014 when updating new IOS

    I tryed to update my iPhone 4s to the new software 6.0.1 this evening and now m iphone is a brick. I am unable to update

    Error 3014 means the following:
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
    Here's the article containing the above: http://support.apple.com/kb/TS3694

  • Error Code U44M1P7 when upgrading to 12.0.4

    I have tried the steps in http://kb2.adobe.com/cps/902/cpsid_90228.html and have tried completely uninstalling and reinstalling CS5 but I still get the error.  Any suggestions on other possible solutions? 

    Yup. would be nicew to hear from Adobe on this. Ovcer the past several months I hav e tried to install the 12.0.4 update and keep getting the same error code others are getting.Wha
    zzup Adobe?>

  • Error code 23 when trying to upgrade???

    Error code 23 when trying to upgrade/ also have lost wi-fi connection.  A coindence or related problem?

    Hi Dauby51,
    You may need to uninstall and reinstall PSE 11, then reapply the updates.
    Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
    Give this a try and let me know how it goes,
    Regards,
    Pete

  • HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    Well I spoke too soon.
    The update was successful, but now I cannot connect to the 3GS data network.
    Cannot get email and cannot open a page in Safari.
    +"Safari could not open the page because the server stopped responding."+
    +"Cannot Get Mail+
    +THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
    Email and internet work fine on WiFi.........no data using 3GS network.
    Looks like I will have to revert back to old OS.

  • TS3694 I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this

    I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this?

    Here you go:  http://lmgtfy.com/?q=iphone+error+3194

  • Why is there is an error code A12E3 when i upgrade? [was: ?]

    Hi Why is there is an error code A12E3 when i upgrade?

    Hi kghila,
    You can try the steps mentioned in this document under the section download products and updates
    http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    Thanks
    Kapil

  • Iphone 4s not offering upgrade to OS8 via iphone or Itunes, no error codes, it simply says that iOS 7.1.2 is up to date

    OS8 via iphone or Itunes, no error codes, it simply says that iOS 7.1.2 is up to date. I have reinstalled the current iOS to ensure that there was not a glitch but no result

    Yep latest edition of iTunes and serial number of phone is 5K*****A4S model MC603B\A .... I looked at serial number and presumed the 4s at end suggested that it was a 4s??
    <Personal Information Edited by Host>

  • Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

    I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3.  "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
    I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol.  Here's why:
    I had 8 instances of a particular movie clip on stage, each on a different frame.
    When I deleted the symbol from the library, the compiler error went away (but so did my stage instances).  So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol.  Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
    I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them).  Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol.  The use count on the old one dropped to zero, and the use count on the new one went up to 8.  The compiler error was gone, and it only went away once the use count for the old symbol was zero.
    The old and new library symbols are identical as far as I can see.  Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc.  Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language.  Somewhere in that process, the Flash Authoring environment screwed something up.  Does anyone know anything about this problem?
    I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them.  It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

    It works, but slowly as if somer AS1 code is interpreted into
    very
    ineffective machine code by AS2 interpretor
    My question was if it is know which particular AS1 features
    have these
    problems in AS2
    "ggshow" <[email protected]>
    ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
    × ÎÏ×ÏÓÔÑÈ
    ÓÌÅÄÕÀÝÅÅ:
    news:f17r79$efu$[email protected]..
    > some AS1 not working when the movie run in AS2...
    > if you want to publish it as AS2, then write it in AS2.
    >
    > * it is time to learn AS3
    >

  • Error code -10810 when starting up any app

    Getting error code -10810 when I click to start any app in the Application folder. Only thing different I did this morning was upgrading coconutBattery. I'm guessing that's the culprit but would like to know what the error code means.

    From LSInfo.h in LaunchServices.framework
    kLSUnknownErr = -10810 /* Unexpected internal error */
    Essentially, Launch Services is hosed. I would suggest blowing away your Launch Services cache.
    1) Quit all running apps
    2) Go to /Library/Caches
    3) Move any file to the trash that has "com.apple.LaunchServices" in its name. (i.e. 'com.apple.LaunchServices-0230.csstore')
    4) Go to ~/Library/Preferences
    5) Move com.apple.LaunchServices.plist to the Trash
    6) Restart
    Hope that helps.

  • I keep getting error code 54 when synching iphone 5, how do i fix?

    i keep getting error code 54 when synching iphone 5, how do i fix?

    Hi papabear74,
    Try using the steps in the following article to help you troubleshoot this issue:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for