Error Code 9004 after Lollipop Upgrade 4/15

Yesterday, my LG G3 upgraded to Lollipop (April 15th 2015).
Now I am unable to access my voicemail. I can see that it's there by the widget on my home page, but I keep getting the:
Error Code 9004
message and I have to manually retrieve my voicemail messages using *86.
AND, if I try more than once to access (not manually) via the widget, the icon no longer shows I have however many voicemail messages to retrieve.
I am not happy.
Marti

mcpopp,
Let's get your voicemail functioning again! You're still able to access your voicemails successfully with *86? Did you previously access through visual voicemail? Have you attempted to restart the device and test again? I'd also navigate to your application manager and clear cache/data from the application. Please share some further details. Thanks!
TrevorC_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

Ki235 Error When PGI After Ehp6 Upgrade

Hello
What would cause KI235 error when PGI after ehp6 upgrade? We are upgrading to ehp6 and are receiving this error when PGIing delivery. It only does this in the upgraded client and not in non-upgraded client. The automatic account assignments match exactly in both clients and are not missing or incorrect.
Also check OKB9 setting it is perfectly ok.
Please advise,
Thanks,
Themba

This is a repetitive issue and have you searched the forum before posting?
G. Lakshmipathi

Error code -42404 after the 10.4.1 update

Anyone getting the error code -42404 after installing the 10.4.1 update? It appears when I open the itunes store, and tells me to restore my ipod to original settings. I've tried reinstalling and I still get the error. I'm running windows 7 64-bit.

Yes I have 10.5.1.42 and Win7 x64 and have just started getting the same error when iTunes starts up today - although I think iTunes has not updated for a while?
I have just restored my iPhone 4S to a 3GS backup this morning, and now I see this error and am unable to sync with the iPhone - I was able to do this last week.
Have reinstalled iTunes as it suggests but this has not fixed it.
Help!!!

Error code: sec_error_untrusted_issuer, after i add the exception, get the certificate i get a blank page with big letters NOT FOUND.

www.google.com uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
The certificate is only valid for 78-159-121-201.local
(Error code: sec_error_untrusted_issuer)
After i add an exception for the site, i get this:
Certificate Status:
This site attempts to identif itself with invalid information.
Wrong site:
Certificate belongs to a diffrent site, which could indicate an identity theft.
Unknown Identity
Certificate is not trusted, because it hasn't been verified by a recognized authority.
And then a blank page with big letters "Not Found"
== URL of affected sites ==
http://google.com , www.youtube.com , www.omegle.com , www.lockerz.com

Do NOT add a security exception: someone is tampering with your internet connection!
When you ask to connect to these sites using https, Firefox gets a certificate from the website which responds. Anyone can make a certificate, but to be valid the certificate must be signed by an organization which Firefox trusts.
The person responding provided a certificate with its response which which was not signed by anybody, so Firefox doesn't know who sent the response, and neither do you.
In short: you asked to talk to google and google did NOT send the response.
As this is happening for several different websites, the attacker is probably on the network between your computer and the internet. Ask the people you get your internet connection for help: they may have had their computers hacked, may discover that the problem exists further along in the network, or they may even be responsible themselves.

Front cam deteriorated after lollipop upgrade

Afte lollipop upgrade front cam pictures are very sloppy and blurry . Previously they were much much better now the picture quality is too bad as if I am using a 0.2 pixel cam
Has anyone faced this issue pl help me

I can assure everyone here that both the cameras are WORKING PERFECTLY FINE with me in fact after lollipop upgrade, the main camera has become much much much more awesome!
Have a look at my Z1 cam's improvement - http://i.imgur.com/6Cor3JK.jpg
Either the phone is still not updated correctly, or you have some wrong settings in your 'manual camera settings'
Try this - Clear defaults, cache, and settings for your phone's camera application and try again.
P.S. I was using GoogleCamera for these photos in kitkat and in lollipop as well (link attached)
Feel free to ask away :-)

Why is there is an error code A12E3 when i upgrade? [was: ?]

Hi Why is there is an error code A12E3 when i upgrade?

Hi kghila,
You can try the steps mentioned in this document under the section download products and updates
http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
Thanks
Kapil

SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert) after Firefox 36 Upgrade

When upgrading from Firefox 35 to 36 (Windows 8, 32 bit) I start getting "SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert)" SSL errors on at least one website I use. (https://marketplace.ibmcloud.com).
The message only appears when I get redirected to the website again after a previous OpenID login (some more cookies are set). When I browse the website without authentication it works on the encryption without any issues.
None of [1] applied, I do not experience this problem with any other browser or the previous version of Firefox. It seems to be limited to the specific case. Clearing any kind of cache, enable / disabled the ssl3* mechanisms, did have zero effect.
Is there any other way to debug this or someone has an idea what changed with Firefox 36 to introduce this behavior? I downgraded back to 35 for now to work again.
[1] https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=SSL+peer+reports+incorrect+Message+Authentication+Code+(Error+code%3A+ssl_error_bad_mac_alert)&step=aaq-question

I created a ticket there as well for them to investigate, although knowing IBM I guess we know the answer already, if I hear anything from there I will let you know.
However, as the problem only occurs on the one version of Firefox as of right now, I'm inclined to role out potential server side issues as a reason and pass it to something within Firefox, or was there a change any encryption defaults that might force the server to switch to a different version or something that might have the bug?

Error code 13019 after upgrade

Updated to 3 on my 3G and phone no longer had ipod tunes available. Put it in to resync and it took forever to back up, then, eventually it crapped out with an error code 13019. Checked these posts and tried the suggestion of unchecking all syncs; syncing, then rechecking and syncing. All this gives me is a new errror code 13014 which I really don't want to waste my time chasing down. Anyone got any ideas as to how to make this work???? Have had problems before when upgrading to a new version of software. Wonder if anyone tests these upgrades???? Help!!!

Got it!!! I deleted all the music with an exclamation point next to it. Then went back to the music tab on itunes and sync'd again. Now no error and the songs don't get skipped on my ipod. Thanks for the suggestions!
Steve

Iphone 3GS Error code 14 after trying to update to ios4

Hi!
So i tried to upgrade my iPhone 3GS, which I just got back from apple, to iOS4.
After downloading iOS 4 via iTunes it started installing and then crashed right when it began installing. Bam Error Code 14.
Funny thing i upgraded my Girlfriends 3G two days earlier on the same book.
Well so I started trying everything:
Use an other USB Port
Use an other cable
Create new user on Mac and reinstall iTunes
Redownload ios 4 via iTunes
Redownload ios 4 via the Internet
Try in DFU Mode
Even tried downgrading to Os 3.1.3./3.1.2
Of course also tried an other pc and an other mac.
nothing works for me!
Kinda annoyed cauz I really need my Phone!!!
Anyone got an idea?

1. Perform USB isolation troubleshooting, including a different USB port directly on the computer.
2. Put a USB 2.0 hub between the device and the computer, or eliminate the hub if using one.
3. Try a different USB 30-pin dock connector cable.
4. Eliminate third-party security software conflicts by disabling all anti-virus & firewalls.
5. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
7. Try to restore from another known-good computer and network

Error code on mac when upgrading A12E3 help?

I keep getting the following error message when upgrading Creative Cloud Creative Cloud error code: A12E3 I am on a mac how do I correct this issue?

well I have absolutely no idea why, but suddenly it worked! I have tried numerous times and always got the same error. Just tried again after I posted this question and presto...it worked! Perhaps patience is the key.

Error code: 12017 - I cannot upgrade my software t...

Hello,
I use Nokia Suite 3.2.100 and Nokia E52. Nokia Suite found a newer version of software for my E52. Downloading complete succesfully, creating backup before installing also, than I see - "Preparing for installation" and after few seconds appears a message with na error code: 12017 ("there was a problem with Nokia Suite. Try to do it again later. Reinstall Nokia Suite if problem will show again" - this is my translation from polish language).
I already use this version of Nokia Suite to upgrade my phone software and ther was no problem. I didn't do anything with my laptop since that time. Phone works ok, laptopo also, other functions of Nokia Suite also.
Thanks for help in advance!

Hello,
Sorry for very late response - It was very busy time at work for me...
I prepared a log file for you doing the same things as before but right now I could upgrade my software on E52... Very strange, because I didn't do anything special before last time, apart from Windows updates. I cannot help sending a log file and I'm happy that I finally upgrade my phone software, but in my opinion problem still exist (according to other post on this forum).
I will try to do an upgrade on my other phone Nokia 5230 and see what's happen.
Anyway - thanks a lot for help and your time!
Have a nice X-mas time!

Startsap error code 12 after oracle patch updation frm10.2.0.2 to 10.2.0.4

After applying oracle patch 10.2.0.4 on SUN 10 platform, startsap gives a error code 12. I am able to start the database but the startsap does not work. This is happening for all our systems for which we upgraded the oracle patch. R3trans -d also gives the same error. Trans.log says invalid user/password but we have not changed any password of any oracle user. In fact we are able to login to sqlplus using system and our old password. Any pointers would be higly appreciated.
Regards
Gokul

SAPUSER table was missing and OPS$SIDADM user was also missing. Now I am able to do sqlplus /@QGR but the problem persists . R3trans -d out is
4 ETW000
     196 0.703592
4 ETW000 [dev trc     ,00000] Assigning server context 0x10190b258 to service
context 0x101908f68
4 ETW000
105312 0.808904
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x101969140
     158 0.809062
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x101969140
     143 0.809205
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x101908f
68,srvhp=0x10190b258,usrhp=0x101969140)
4 ETW000
     627 0.809832
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed w
ith rc=1034
4 ETW000
   14742 0.824574
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x10190b25
8)
4 ETW000
     170 0.824744
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1019
08f68,srvhp=0x10190b258)
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x101969140
     158 0.809062
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x101969140
     143 0.809205
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x101908f
68,srvhp=0x10190b258,usrhp=0x101969140)
4 ETW000
     627 0.809832
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed w
ith rc=1034
4 ETW000
   14742 0.824574
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x10190b25
8)
4 ETW000
     170 0.824744
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1019
08f68,srvhp=0x10190b258)
4 ETW000
     179 0.824923
4 ETW000 [dev trc     ,00000] Deallocating server context handle 0x10190b258
     573 0.825496
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1034
4 ETW000
     191 0.825687
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1034
     112 0.825799
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1034   performing CON [dbl
ink#5 @ 431]
4 ETW000
     565 0.826364
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01034: ORACLE not available
     131 0.826495
4 ETW000                        ORA-27101: shared memory realm does not exist
4 ETW000                        SVR4 Error: 2: No such file or directory [dblink
#5 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_o
ra_tnsname = 'QGR'"

Error Code 9004 after Lollipop Upgrade 4/15

Similar Messages

Maybe you are looking for