Error code after reformatting of computer

my computer was starting to bug up and it would restart every 5 minutes.
Usually what fixes it is if I do a reinstall. This time I formated my HD and when i tried to do a fresh install thats when a page saying
Recovery
your PC needs to be repaired 
the operating sustem couldnt be loaded because the system registry file is missing or contains errors.
File:\\Windows\system32\config\system
Error code 0xc000000f
 No matter what it goes straight to that screen.
Is there anything I can do for that? I have an install disk for windows 8.

Yea, I did a search in the app section, in the laptop (spotlight), and its nowhere to be found. Take a look at this...I just tried to purchase Facetime and this happens.

Similar Messages

  • Error code after itunes update -42404

    error code after itunes update -42404 cannot connect to ipad it is telling me to restore ipad, and cannot connect to store...
    Message was edited by: CFC.Steve

    I assume you updated itunes on your computer. PC or Mac?
    Look at the posts in the More Like This area to the right side of this page.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • 2106f Error Code after Internet Recovery Attempt

    Anyone ever get a 2106f Error Code after Internet Recovery Attempt? What next?
    Background: Macbook Pro (late 2011) shows startup progress bar, goes ~ 1/10th of distance, freezes, then goes black after ~2min. Did this:
    1. Clean startup attempt (shift)
    2. Zapped PRAM (option command P R)
    3. Reset SMC, Startup
    4. Attempted Internet Recovery process (Cmd R) over ethernet connection, but after several hours, got the -2106F error.
    MacBook Pro 2.2 i7 Late 2011

    How long were you able to watch this movie before it crashed?
    Now is it everytime you boot up, you get the BSOD  0xc0000001 ?
    Can you start up in SAFE MODE?
    "Knowledge should be unrestricted and the most important commodity we can offer to help one another."

  • Tried to restore and update but got error code after download, iphone 4 on verizon...ios 4.2.1 tried to restore and update but got error code after download

    iphone 4 on verizon(16 gb) ios 4.2.1 tried to restore and update but got error code after download.... all the iphone does is sit there with the picture to connect to itunes. This is very important, please help!!!!!! updated itunes and restarted and have tried everything... this iphone has never been synced or backed up with itunes. please help!

    error 1015 usually means you have a jailbroken  devices, which per the term of use of the forum, you can't get any help here.

  • Error Code After Running Apple Hardware Test

    I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
    this is the error i got after running apple hardware test:
    (it came out as a Mass Storage error... which is Hard Disk i guess)
    **ERROR*CODE***ERROR*CODE**
    2STF/8/3: S-ATA Bus 0-Master
    **ERROR*CODE***ERROR*CODE**
    Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
    I know about this: http://www.apple.com/support/imac/repairextensionprogram/
    I might go to the apple store, but I dont wanna make a trip out there for nothing.
    Does anyone know what I can do or should I just take it to the apple store.

    Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

  • None exist error  code after a graceful shutdown

    I'd like to return a none zero exit code after a normal graceful shutdown.
    My end task is to be able to send a restart event to a number of machines running my application that will gracefully shutdown and inform the shell script that started it that it wants to be restarted.
    One option would be System.exit with a shutdown hook that monitors the current threads, and does not end until the other threads have also exited, but I would have to inform this hook of threads that should be allowed to finish naturally. But that seams a little [t]icky.
    I guess I could write to a file, and then close down naturally. But this leaves files drifting about. I'm not overly keen on that either.
    Any other suggestions? Thanks, Mike

    The "worker" thread should
    not be interupted, and told to exit, just left to
    exit under there own steam. (when they have finished
    the current job). What is the "worker" thread ? Is it what I meant with "watcher" thread ? Is that what you said or what I said ?
    And, I assumed we are talking about a server-like application, that is one running indefinitely, as opposed to one that would perform a specific task and then terminate. Am I correct ?
    The initalization of this new type of
    shutdown/restart is currently undefined, but will
    likely that the application start listening on a
    socket connection. I'm sorry, I don't understand that at all.
    I want this to ease deployment,
    currently when I deploy a new version I type "ant
    deploy", then VNC on to each of the computer
    (currently just 3, but likely to be more soon) and
    manually restart. What I want is to just type "ant
    deploy" it sends a signal to the running copies, and
    they restart themselfs. (I'm a lazy brsatard).You know this quote by Larry Wall (?) about the three most important characteristics of a programmer, don't you ?
    >
    and thus the exit code is already defined.Not so with what I would consider a "graceful
    shutdown". Then the application would shut down as
    all the threads have completed.It depends on whether having "all threads completed" is a normal part of the application's flow. If I assumed correctly we were talking about a server-like app, then it's not. Ergo the command to terminate has to be issued at some point. The question is how that gets done. For instance, if you send a CTRL-C from the shell, your application shuts down with an error code != 0.
    A graceful shutdown needs to be initiated somewhere. How do you plan to do it ?

  • MSI Gaming 5 Z97 00 Error Code after Bios Flash

    Was using a USB for bios flash through the uefi bios. I chose ME flash, and it flashed ME then rebooted and then flashed the bios and then it finally rebooted but to a black screen. After a few minutes, I restart the computer and it has an 00 error code now. I removed the graphics card and cleared the CMOS.

    Quote from: HighMans on 05-October-14, 04:04:37
    I flipped the PSU off, I always do that.
    remove the power cord itself from the electrical outlet
    after that proceed with >>Clear CMOS Guide<<
    Quote
    PSU:   
    12v rail Rating of listed PSU: 384W
    CPU: G3258
    Memory: Corsair 8GB XMS
    SSD/ HDD: Seagate 1TB and a PNY SSD
    CPU COOLER: Coolermaster Hyper Plus 212
    Raid Card: N/A
    Sound Card: N/A
    Any Additional hardware plugged into your system: N/A
    OC: (Yes / No) Yes
    Operating System: Windows 8.1
    Quote
    PSU:   
    12v rail Rating of listed PSU: 384W
    PSU brand and exact model?
    Quote
    Memory: Corsair 8GB XMS
    how many memory sticks?
    exact models?
    Quote
    SSD/ HDD: Seagate 1TB and a PNY SSD
    have you tried to disconnect them both?
    Quote
    OC: (Yes / No) Yes
    that's not good idea to flash your BIOS when the system is OCed

  • Error Codes after Apple Hardware Test...

    After someone here told me I've been experiencing kernel panics, I did some digging on the x lab site and re-ran the Apple hardware test in loop mode. after 17 runs, it returned the error:
    4MOT/2/40000005:Right Side
    I can't seem to find a list of error codes anywhere. My MBP has two 1GB RAM chips, both were pre-installed when I got the machine from Apple. I haven't tried switching them to see if the same error is returned on testing or with ONLY one or the other installed to see if this is truly a RAM issue. I thought I'd post to the forum for ideas first...

    I'm afraid I have no idea. If you have AppleCare, I would ask them about the error code. You do have a different error code (/2/ not /1/ and different number after the second slash) than the link, so perhaps it is not a fan motor that is your problem, though I'm hard-pressed to think of what other motors the MBP has (I don't think the hard drive is on the right side, for one.) Alternatively I can imagine, since you said it took you 17 tests to get the result, that this is an intermitent problem--for all I know, just a slightly loose/poorly soldered wire--and so istat hasn't detected the problem yet.
    I think AppleCare or a Mac Genius is your best bet, if you have the one or can get to the other. In particular, unfortunately, Apple does not seem to publish the hardware error codes; it only makes them available to techs.
    Good luck!

  • Installing after reformat of computer?

    I am preparing to reformat my computer for a completely fresh install of XP.
    After this is complete I will need to re-install itunes and my ipod.
    I have the 30GB 5G ipod with the original install disc.
    Shortly after purchase the updated firmware was released which I downloaded and upgraded my ipod (leaving me 2 updates in add/remove)
    When I am ready to install my ipod again do I use the original disc which came with the pod and then run the setup.exe for the updated firmware which is on my pod now or do I jst use the setup.exe of the latest update?
    I have 2005-10-12 plus 2006-01-10 and am totally unsure about this re-install. I don't know if a downloaded update contains all the setup files which means I don't need my original disc first.
    Hope this makes sense as I want the re-install to work the way it should in the correct order. One disc and then the update or just the update? help please
    Thanks for any advice
      Windows XP Pro  

    Thank you for yor quick reply
    I will back up my library to an external drive but thanks for the reminder.
    The last update worked fine for me but it does make sense to follow your advice and have the option if things should go wrong.
    Appreciate your reply & hope everything will work after a re-install.

  • Error code after cloning

    After cloning my OS HD to another drive using CCC I'm getting "The operation could not be completed, an unexpected error has occurred(error code -43)" when I click on Time Machine in the dashboard.
    Does using CCC somehow negate TM or cause it to not function from the dashboard? I can start it from System Prefs or the recent items list but not from the Dash.

    Don't know anything about a TM widget, but that error states:
    fnfErr = -43, /*File not found*/
    and I surmise the link to the widget is broken.

  • Wish to fix an error code after upgrading Microsoft Office 2007

    I just recently upgraded to MS Office 2007, but every time I launch Microsoft Outlook, I get this error code: The Add-in "ACT! Extensions" (C:\WINDOWS\system32\Act9Ext.dll) cannot be loaded and has been disabled by Outlook. Then goes on to advise me to contact the Add-in manufacturer for an update or uninstall the add-in.
    I no longer have that specific version of ACT on my computer, but obviously I still have that extension and I am unable to find it.
    I will appreciate if someone is able to help me to correct this error.
    Thank you, 
    Solved!
    Go to Solution.

    I googled your error and this is what came up.
    http://help.lockergnome.com/office/remove-referenc​e-Outlook-Add-ftopict996422.html
    and
    http://help.wugnet.com/office/Add-error-ftopict106​3593.html
    Message Edited by CSX on 11-22-2008 02:05 PM
    Ignorance is no excuse!

  • Error code after updating

    I have tried updating my iPod software, but after i did, i got a message saying something about an error code - 1604. I have already tried looking at various parts of the Apple Support website, but none of the things suggested have worked. Whenever i turn my iPod on, i am always getting the same picture about plugging in to iTunes. Can someone please give me suggestions as to what to do to solve this problem???

    I have tried looking it up on Google and seen thousands of YouTube vids on the subject, but nothing is working. This is really starting to annoy me, as no-one I talk to knows what to do!!!!!!!

  • Got an error code after running AHT. Now what?

    I ran the Apple Hardware Test and got the error code:  4sns/1/40000000:th1H-83.265
    I looked it up and it apparently means there's a problem wuth my heat pipe or heat sink. Makes sense because my MBP burns up and fans really start going when running a game, movie, or photoshop. Does this mean I have to replace something or what? How much will it cost me if I take it in for repairs? I no longer have warranty. I had to replace my harddrive after it failed in Feb 2012 so I will not be happy if it turns out the failure was related to this heat problem and never fixed.
    Mid-2009 13" MBP running OSX 10.8

    That error is indeed a sensor failure.  Make an appointment at an Apple store genius bar.  It is a hardware failure that only they can resolve.  They will tell you what costs are involved, I simply do not know that.
    Ciao.

  • Error code after downloading album

    i downloaded the new Evanescence cd and after it started downloading all i got was error code's for every song except for the interactive booklet and the interview that came with the album download. i have been charged the $10.99 for something that i do not have!!!!! How do i get my refund!?!?!?!?!?!

    i looked into the "purchased" tab and none of the songs appear in there, not even the error codes. my bill shows $9.99 for something i never got.
    just checking. are we talking about doing a "Store > check for purchases ..." as per the following document?
    How to resume interrupted iTunes Store downloads
    ... or do you mean "clicking on the 'Purchased' playlist in the itunes sourcelist"?

  • HT201210 I'm getting this error code 1816 on my computer when I try and restore my ipod touch 2g or 3g not sure if i should get rid of this or fix it

    Hi, I'm Caleb, I recently tried restoring my apple ipod touch 2nd gen it will not restore so I can use it, It has error codes that won't show up on the customer support. Recent Error code 1618, please tell my how I can fix this problem, thank you.

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

Maybe you are looking for