Error code B200 for Canon printer MX459

My Canon printer MX459 just keeps giving me the B200 support code every single time i turn it on 

Hi jeraldmo,
If resetting the printer did not resolve the B200 error, the printer will require servicing.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Error Message B200 for Canon Pixma MG5320

    I have an error message B200 on my Pixma MG5320 that says "Unplug power cord and contact service center."  I'm more than 100 miles from my nearest Canon service center.  Any fix for this error message other than to buy a new printer?  With the price of gas, driving 200 miles round trip to fix the printer really isn't feasible.  Thanks!

    HP doesn't have any of the quality features that CANON has,
    Printing, Scanning, etc. NO ! I don't work for Canon !
    I have DEEP researched Epson, and HP, and it doesn't cut
    it for me.

  • How to fix the error code B200 of MP258 canon printer?

    please help me how to fix the priter that has an error code B200 of MP258.

    Hi guadaduque, thanks for posting!   In order to allow the Community to better help with your question, we'll need some more information from you.
    What exact computer operating system are you using? Once we have this information,  the Community will be better able to help get you up and printing again!

  • PIXMA MX922 with error code B200

    I am about ready to throw this printer in the trash. First off everytime I want to print to it over WiFi I have to reset my router for my computers to be able to print. Now this error code (B200) comes up and the manual says to call support. Can a tech or someone from Canon help here?

    Hi Frustrated83,
    Disabling the Wireless LAN DRX and iPv6 settings on the printer may resolve the wireless issue you are experiencing.  To do this, please follow the steps located at the link below:
    Checking the Wireless LAN DR and iPv6 Settings
    Regarding the B200 error, if you have already reset the printer and are still receiving the error, the printer will require servicing.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to ignore MP560 error code B200

    I have got error code B200 on my MP560 last week. I tried every methods which I found on internet, such as unplug, reset, deep clean the printhead, etc. But it doesn't work. I think I have to give up to recover the print function. I plan to buy a new printer but I'd like to use this MP560 just as a scanner. Is there any way to ignore the error code so I can use it as a scanner?
    Thanks a lot to anybody who can help me.

    Hi griea,
    To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10  minutes, then plug it back in and turn it back on.  If the error persists, the printer will require servicing to resolve the issue. 
    Please drop us a line by clicking on the Contact Us link to start the process!

  • What is Error code B200

    What is Error Code B200?

    Hi Wingood! So that the Community can help you better, we will need to know exactly what printer model you have, as well as the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

  • I have a MP560 which has an error code B200.

    I have google searched error code B200, followed the suggestions with no results.  
    What do I do now?

    You are not alone.  Take a look at the thread titled
    "Call to Arms for the dreaded U052 Wrong Printhead Error"
    Always hate to see corporate ripoffs by companies we used to trust.

  • I have upgraded my iphone 4 (ios 4.3.5 to current release 5.0.1) yesterday and got an error code 1630 for carrier up-gradation failure. Now my device is not working for phoning purpose. It just stay muted at the time of call.

    I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
    and think it was the biggest mistake I have ever done.
    Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
    and even the the receiver also can't here my voice. calling other and after receiving by them and to be
    mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
    checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
    I do now?
    Please help me.
    I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

    Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
    Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
    Thank you,
    tjr

    Try following the steps outlined in this blog post:
    http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

  • Error code 499 for download music

    error code 499 for itune music download all other music is ok.thanks

    Hello, holebung. 
    Thank you for visiting Apple Support Communities. 
    Here are the troubleshooting steps that I would recommend going through when receiving error 499. 
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    iTunes: Advanced iTunes Store troubleshooting
    https://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

  • Is there a range of error codes reserved for user defined error codes?

    I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
    Samee thing for warnings (errorcode > 0)
    Thanks

    I have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
    First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
    Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
    User Interface Library
    Easy I/O instrument driver
    Toolbox instrument driver
    ActiveX Library
    DIAdem Connectivity Library
    .NET Library
    DataSocket instrument driver
    Network Variable Library
    Real-Time Utility Library
    TDM Streaming Library
    UDP Support Library
    This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
    Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Import Error (Partial Set failure with RC error code = 0x84020020 for rec

    Hi,
    While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
    0 through 212"  and no record get created in Data manager.
    Although i mapped all values , still it giving me an error message.
    I tried to Import other data and it was all working fine.
    Please guide
    Regards
    Sandeep Kumar

    HI,
    I checked the exl file and found that in the first column and first data  was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
    I don't know wht the logic behind this:
    if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
    If anyone have any clue , plz let me know.
    Regards
    Sandeep

  • Error code 20600 when starting printer monitor ImageprografIPF5100 (canon)

    Recently I bought a new MacBook Pro including OSx 10.8.2
    I'm a photographer and use a Canon ImageprographIPF5100 to output my work.
    I set up my new computer with help of the TimeMachine so I have completely the same environment as on my old MacBook pro running OSx 10.6
    When I connected my printer it was clear that the current driver was not going to work on 10.8. On the Canon USA site I found the driver for my printer working on OSx 10.8 and installed it. The printer is connected to the computer with the USB port.
    Right away it was clear something is wrong; after installing the driver the software asks me to point out the printer in a list, but the list is empty. After starting the printmonitor I get the error message "Error Code 20600 Failed to iniotialize communication module"
    Looking at other discussions on this site I figure the old driver has not been completely whipe'd from the system. Is there someone who knows what to do?

    The first action is to remove the current iPF5100 printer from Print &amp; Scan.
    Next action is to remove the supporting driver files. Open Finder and select Go > Go To Folder in the menubar. Then type in /Library/Printers/Canon and press Go. This will take you to the Canon folder where you will see the GARO folder. Trash this folder.
    Still in Finder, navigate to the Applications folder and trash the Canon iPF folder (called also be called Canon GARO).
    With this done, run the iPF5100 driver installer for 10.8, although if you are in a region that uses A size papers then it would be better not to use the driver from USA and use the following driver from Canon Australia.
    http://support-au.canon.com.au/contents/AU/EN/0100489102.html

  • MX860 PRINTER ERROR CODE B200

    I HAVE A MX860 PRINTER WITH AN ERROR CODE OF B200. IT HAPPENED WHILST PRINTING A 50 PAGE PLUS DUPLEX DOCUMENT. WHAT DOES THIS ERROR CODE SIGNIFY?

    Ref my MX860. So... I did NOT wash head or anything. I opened cover, shoved print head manually to left all the way. Rapidly pushed "on" button a bunch of times until unit beeped back at me with funny sounds and went completely dead... Well, before throwing out the second story window, I then rapidly, pushed "on" 5 or 6 times and noticed the print head moved to the right. I shut the deck and waited... and waited... the 'infamous' Canon 'I'm gonna print, no wait, wait, really, I am, in a minute, wait, wait, listen to my sweet sounds, wait, I'm fixin' to, wait". And then it happened! Everything got real quiet and my LCD screen popped up, looking totally normal. So far, it prints, copies and will send a fax. Try it, sure won't hurt, and it seems to have fixed mine :-)

  • Error Code B200

    dont know how i figured it out, but I did...start with the printer offsimiltanously pressed the ON button and the Home button...several times...I did it like 10 times...the printer starts to go a little haywire but then comes back to life!!!! Yeah!!!!!!

    I got a B200 error as well. I had been scanning all morning, where the scanner was scanning fairly quickly. I was not printing on the unit, and I have not printed on the unit for weeks. After scanning to PC PDF disk file for about 100 pages (i.e., no printer involved), it then started scanning each page much more slowly. This seemed very odd so I decided to powercycle the unit (turn it OFF then ON) in hopes that it would reset its state and that scanning speed would resume to normal. When I powered it ON, I received the B200 error code. Once again, I was not even printing, and have not printed on the long in a long while. I have tried various suggestions online but had zero luck. B200 keeps appearing and the unit is completely inoperable. I noticed each printing cartridge was empty (by looking at the clear side part). I was surprised by this since I thought some were partially full… I’m not sure, but maybe the ink can evaporate over time if not used.  In any event, I replaced each cartridge with a new one, but the B200 error remained. I then removed the printing head, and placed it back into the unit, but the B200 error persisted. I was going to order a new printer head, but it’s like $50 without shipping (~$100 w/shipping from one vendor) which is a huge chunk of money I can apply to a new printer. Regardless, the error message is generic, so I'm not 100% sure what the real cause is, so buying a new printer head would be based on a guess on my part, possibly an incorrect costly guess.  While I had been very favorable about Canon’s MX860 based on my usage while the unit was working, this behavior in handling an error condition seems like it can be improved so that it is more accommodating to the consumer for the following two reasons… First, the B200 error is unclear, and does not surface any detail about the specific low-level reasons for the unit’s internal software taking the path of displaying the error and then making the unit completely inoperable thereafter. Imagine if your care displayed such an error code and disabled your vehicle because of an old filter. Perhaps this analogy is bad, but how I can know given the error code is ambiguous.  Second, the B200 error leads to the unit becoming completely inoperable, where it seems (I infer) that parts of the unit could still be left functioning. I'm forced to infer due to the first reason mentioned above, the generic error code offers me no info to understand whether making the unit completely inoperable is reasonable. I infer as I do here because there is much online info about B200 relating to the printing aspect of the unit going bad, not scanning to file, or faxing over the phone.  In the end I have a bricked MX860... completely inoperable.  

Maybe you are looking for