ERROR CODE BI0HD-8 MODEL P6112P WON'T BOOT UP

my computor will not finish starting up it gave me the error code biohd it was running good until i did a back up on c drive a guy i know said you are on the wrong drive now it wont run to boot up i get power but the mouse it shuts down right after a couple of seconds also the keyboard some guy tell me its the mother board its model p6112p i don't know what to do i am in the philipines can i trust a tech here
[Personal Information Removed]

Normally a BIOHD-8 error, means the hard drive has failed or is about to fail. Sometimes a bad motherboard may cause this error but most bets are on the hard drive.
Please send KUDOS
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

I keep getting an error code of 403 and it won't let me into my account.

I keep getting an error code of 403 and it won't let me into my account.

I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Error code NW-31246-6 - Playstation won't connect to internet

I was playing GTA Online when my PS4 randomly disconnected from the internet, normally I have perfect internet so I find no reason that distance from the router should be a problem. All my other devices connect fine to the internet such as mobile phones, TV's, computers etc. Whenever I try to reconnect to the network, the SSID does not appear. I have tried setting up the connection manually, but I do not know the Primary DNS and there are no clear descriptions of how to do it online. Resetting the router, obviously, did nothing. The error codes I receive are: NW-31246-6 and NW-31291-6I have looked these codes up and there are no proper resolutions to them. P.S. Is there any way to play Blu-Ray discs without having to connect to the internet to turn a setting on, I have been using my Playstation 3 instead but it is very annoying to deal with a load of new wires when I already have so many.

Wifi frequency is terrible on PS4. Use a cat6 cable for a more stable experience.

Error Code: U44M1I200 - PSE 11 update won't install

I am recieving advice about an update for PSE 11. I have tried to install the update a number of times and it fails. I need help to resolve this.

update manually: http://www.adobe.com/downloads/updates/

Error with Product Recovery. Now won't boot. Satellite Pro A40

Hello,
I tried to use my product recovery cd to reinstall windows so that the computer would be back to an 'as new' state. However, when using disk one and at about 25% progress it crashed on me saying it couldn't read the disk. Now when i attempt to boot it says 'Please Insert System Disk and press any key' i do so but i just get the same message repeated. It does this is if i try to book from the hardrive or the cd.
Whats my next step, how can i get my computer back!?
Cheers

Hmmm its not easy to say why you couldnt finish the installation. For me it looks like the Recovery CD would be faulty.
Anyway, the message says that no OS was found on the HDD and the notebook cannot boot up!
So what to do I think you should insert an original Windows XP CD and try to boot from the CD. The XP CD should format the HDD and should install the new OS.
Sorry, but I dont see other possibility.

I am trying to reinstall safari for windows 7 and I get "error code 2203" and the install will stop there, any solutions.

I am trying to reinstall Safari on a windows 7 pc and I get an"error code 2203" messege and it won't complete the install. Please help because I like using Safari more than windows.

You are better off using either IE or Chrome ...
Apple apparently kills Windows PC support in Safari 6.0

Error Code: BIOHD-2

My HP computer won't boot up.
When I run Diagnostic Tools on intial startup (F9)
I get and Error code "BIOHD-2" when it is testing Boot Path
It says
"Error Code : BIOHD-2"
"Warning : No drives detected."
"Suggestion : Turn off your system and verify the drive cables are securely attached. If problems persist, contact HP support."
I contacted HP support that they want me to pay $59.99 for a one time service fee to test the system!
I think that is rediculus. They won't even tell me what's wrong or what that error code is? I've had no problems with this computer at all since I bought it FRYs 6 years ago
Can anyone here help me on this matter?
I have a HP Pavilion Elite m9515f PC
AMD Phenom X4 9850 Quad-Core Processor
Please help!
Thank you
Lucky

Hi
Can you see your hard drive in the BIOS ??? When system starts hit the bios key displayed on screen to get into the BIOS
. When you see the bios look to see if your Primary Drive is visible . If not your drive has failed and would need to be replaced . Post your results Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Where to find LED error codes for Portege 4010?

Hi,
My Portege 4010 isn't working, and the AC indicator is blinking an error code (either 0xA or 0x50 depending if I should interpret the first bit as least or most significant). I've tried searching, and I've found a fairly detailed guide that includes these error codes for the Portege M100 and M300 (at http://tim.id.au/laptops/toshiba/portege%20m100.pdf and http://tim.id.au/laptops/toshiba/portege%20m300.pdf) but I can't find anything for the 4010. So can anyone give me a location (ideally official Toshiba) for a document detailing the meaning of the error codes for my model?
Thanks,
Jes

See for 'REP messages' in help menu.

Why am I getting http error code 413 when I try to upload a photo?

I am trying to upload a picture from my computer to the www.NWF.org web site. I have done this 19 times before, but suddenly I'm getting "http error code: 413" and my picture won't upload. I've tried closing Firefox, updating all my plug-ins, and rebooting the computer, none of which has helped. When I Google this error, I don't understand what I'm reading.

Hello tschuss!
I'm so sorry to hear that your update has not successfully completed! I can certainly help to point you in the right direction. Click the link to access the Software Upgrade Assistant, which will provide instructions for how to complete the update if it has failed. http://www.verizonwireless.com/support/knowledge-base-80200/
MichelleH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

TS3694 i get a error code of 3194 and can't restore my ipad because of this.what is code 3194 and how can i get around this problem. thanks.

i am trying to restore my ipad, on itunes i get a error code 3194, consequently the ipad won't restore. How can I get around this ?.
Thanks.

glasstiger wrote:
i am trying to restore my ipad, on itunes i get a error code 3194,
3194 = http://support.apple.com/kb/ts4451
If that Article does not resolve it... then you have a problem.
Perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
Be sure to make an appointment first...
Note:
That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
Unauthorized modification of iOS... http://support.apple.com/kb/HT3743

AHT Error codes

Hi-
Does anyone know where to get Article number 113867 which explains the Apple Hardware Test (AHT) Error Codes for AHT v1.2.6 for Power Mac G4 computers? Trying to troubleshoot a problem child, and it would be most helpful to have that info!
The link to the error codes on the AHT v1.2.6 Article number 113868 results in "Document not found".
A search of the Apple Kbase for Article number 113867 results in only the article number 113868.
Kind of an "Escher-esk" loop of failure.....

Hi Tom-
"Type? error -65536" is the one error I have gotten before the AHT freezes, and that was prior to initiating the test.
Beyond that, the test will run through the logic board, issue a "passed" message, and freeze at mass storage- this is with or without hard drives connected. ATA controller problem???
I guess I am looking for more than the basic explanation of AHT that Apple provides in the kbase. I would really like to know the sequencing of the tests, so that maybe I can narrow the hardware problem down at the point the test freezes.
As it is, the G4 GE 2x450mhz is responding randomly to Disk Repair, PRAM reset, Archive and Install, Erase and Install, substitute CPU, and PMU reset. All have returned the system to bootable service, at least once, but always end with the system freeze, and subsequent failure of the system to load.
Stripped to the shipped configuration, with or without known/tested good CPU, HDD, RAM, Gcard, Keyboard & Mouse substitutes, the system either freezes at gray Apple screen, or, freezes shortly after loading the OS. Occasionally, the desktop is reached, but invariably freezes within moments.
Currently, after an open firmware "reset-all", the system refuses to move beyond the gray Apple screen.
The only thing that does work (most of the time), is booting (with much effort) to the OS X install disc (10.4.3), and running whatever utility or installer I choose. The origional system/software restore CD's (OS 9) result in a blank gray screen.......
So, even with the AHT error codes, I think the problem won't be ID'd with them. Would be nice to have the article Apple references, though!
Chris

Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889

I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
I am always getting the Update error Code 80071AA7
I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
POQ 93 ends.
2015-03-19 02:18:46, Info                  CSI    000001dc [SR] Verify complete
2015-03-19 02:18:46, Info                  CSI    000001dd [SR] Repairing 1 components
2015-03-19 02:18:46, Info                  CSI    000001de [SR] Beginning Verify and Repair transaction
2015-03-19 02:18:46, Info                  CSI    000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
do not match actual file [l:24{12}]"settings.ini" :
Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
2015-03-19 02:18:46, Info                  CSI    000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
= 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
After that i have checked "WindowsUpdate.log" file:
2015-03-18   22:12:23:584   1264   db0   Handler   WARNING: Got extended error: "POQ   Operation   HardLinkFile   OperationData
\SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
I am out of ideas.
Can some one please help me?
What can i do?
Thank you.

See Troubleshooting issues with iTunes for Windows updates.
tt2

JDS: Panel will exit now. Error code is 3

Good morning,
first of all excuse my bad english. I have a very big
problem with my Sun Blade 1000 with Solaris 10
at home. I have a local 192.168.0.0/24 network with
static configured ips on each host. The gateway
(W2003K-Server) is configured to dial out to the
internet via modem.
The ips and hostname are well configured on the
Sun Blade 1000 and on each other host. All values
(ips, hostnames, hosts, ipnodes, nsswitch.conf,
resolv.conf, defaultrouter) are correct configured and
the local and global name resolution is fully functional.
Now the problem:
If Solaris is booted with the gateway up and running
a user cannot login using JDS, giving the
error "Panel will exit now. Error code is 3". If Solaris
is booted when the gateway is down, anything is
working perfect.
There were no such problems using Solaris 9.
I thought it was a name resolution problem. So i
configured a local DNS-Server on the gateway and
changed resolf.conf on the Blade, but that did not
solve the problem.
Does any one encounter similar problems. Does
anyone know how to solve this problem?

That's a licensing error. You can read through several possible solutions here. Also, you can download the Adobe Licensing Repair Tool, which is suggested in the first solution.

Satellite L630-10R - Won't boot and blue screen

Hi everyone,
I recently bought this laptop that had everything to satisfy me, unfortunately, I've been encountering a problem since yesterday night and I want to try everything reasonable before bringing it back to guarantee.
I was using the computer quite casually (online games, web browsing, VoIP mostly) when it decided to shutdown and reboot. Now, everytime I try to boot windows, even in safe mode, I get a blue screen as soon as I've entered my password. The same problem happens when trying to run in safe mode.
I thought it could just be a really aggressive and efficient virus and thought it was well deserved, knowing I hadn't installed an antivirus yet. So I burned an Ubuntu liveCD on another computer and tried to recover my data from there, but to no avail : Ubuntu won't start either, instead it just gives me some kind of memdump or stacktrace (at least I guess it is, because it's got hexadecimal addresses and what looks like function names)
I'm kinda stuck and I really don't understand what could have caused this. Any idea would be appreciated. An error code that showed up when trying to boot windows, but that does not _always_ show up, is something along the lines of *DRIVER_IRQL_NOT_LESS_OR_EQUAL*
Thanks in advance,
shin

Hi,
sorry for the late reply, I was busy this week end but I finally solved my problem on sunday in the evening by updating the BIOS from the 1.4 version to the 1.7 version using a bootable CD. No more blue screen when starting windows and no more problem with Ubuntu either (which I had been able to run in the meantime with the "noacpi" option.)
I wasn't able to find the recovery CD like you suggested, I'm not even sure it was in the box - then again, I'm not the most tidy person in the world and it could be anywhere in the room as far as I know...), but thank you anyway for taking the time to reply. =)

Early 2008 Macbook won't boot after 10.7.5 update?

Updated to 10.7.5, when it rebooted to do the install, there was an error message, and now the machine won't boot. Stuck on grey screen with spinning wheel.... reset PRAM, Disk utility says drive is OK... still no luck. ??
Looks like this has hit the news. Any update from Apple? I would take it to the apple store, but there's a mob becuase of the new iPhone, so..... yea.
Apple, please fix this. And bring back Google Maps to IOS while you're at it.

Updated to 10.7.5, when it rebooted to do the install, there was an error message, and now the machine won't boot. Stuck on grey screen with spinning wheel.... reset PRAM, Disk utility says drive is OK... still no luck. ??
Looks like this has hit the news. Any update from Apple? I would take it to the apple store, but there's a mob becuase of the new iPhone, so..... yea.
Apple, please fix this. And bring back Google Maps to IOS while you're at it.

ERROR CODE BI0HD-8 MODEL P6112P WON'T BOOT UP

Similar Messages

Maybe you are looking for