Error Code: BIOHD-3 ?

Hello.
Last night when i tuned on my computer, i got a problem... Windows was about 10-30min to start up, finally I went into the the desktop, but after a bit windows start freezing and asked me to shut down my computer. Later on i ran a "diagnostic scan" and endeted up with this. I am running Windows 7 64-bit on my HP Pavillion "p6361sc"
Testing: Intel (R) Core(TM) i3 CPU 530 @ 2.93Hhz Passed
Testing: Memory (6144 MB) Memory Passed
Testing: WDC WD10EADS-65M2B0 (2D9952007702) Passed
Testing: hp DVD A DH16AAL (2D9952007702) Passed
Testing: Boot Path Warning
Error Code: BIOHD-3
Warning: No bootable drives detected.
Suggestions: Please Contact HP Support.
Press any key to continue.
I don't know if it's my HDD or my motherboard ?

Hi WayneB1,
You are correct that you will need to contact HP and get a set of recovery discs. Once you have those you will need to replace your hard drive. In Big_Dave's second post there is a link on how to replace a hard drive. The link below will help you order recovery discs.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • Error Code: BIOHD-2

    My HP computer won't boot up.
    When I run Diagnostic Tools on intial startup (F9)
    I get and Error code "BIOHD-2" when it is testing Boot Path
    It says
    "Error Code : BIOHD-2"
    "Warning  : No drives detected."
    "Suggestion : Turn off your system and verify the drive cables are securely attached. If problems persist, contact HP support."
    I contacted HP support that they want me to pay $59.99 for a one time service fee to test the system!
    I think that is rediculus. They won't even tell me what's wrong or what that error code is? I've had no problems with this computer at all since I bought it FRYs 6 years ago
    Can anyone here help me on this matter?
    I have a HP Pavilion Elite m9515f PC
    AMD Phenom X4 9850 Quad-Core Processor
    Please help!
    Thank you
    Lucky

    Hi 
           Can you see your hard drive in the BIOS ??? When system starts hit the bios key displayed on screen to get into the BIOS
    . When you see the bios look to see if your Primary Drive is visible . If not your drive has failed and would need to be replaced .          Post your results   Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Error Code BIOHD-2 During Hard Drive Test No Drives Detected

    I am working on a HP Pavilion p6214y Desktop PC. 
    Just to list the specs for any unusual problems:
    OS = Windows 7 Home Premium 64 bit
    MB = HP P/N: 513430-002 with AMD Athlon II x4 620 Quad Core
    HD = Western Digital 1TB
    Power = 350W LiteOn
    Ram = 8G
    I am getting a blue screen that shows 4 options and I chose F9 for diagnostics and it gave me error code BIOHD-2 when checking the hard drive. It said no hard drives were detected. I have read on this here and checked the bios and it does not find the hard drive. So most people then say it is a bad hard drive. Although, I put the drive into another computer and I can pull files up from the hard drive and view them. It finds the drive just fine in the bios. I also put a working hard drive from that other computer into this HP and it will not recognize a hard drive through the bios.  Since the mother board is not recognizing hard drives throught the sata ports I would assume a mother board failure. I then put in a bootable usb version of Ubuntu 12.10. It runs smoothly and will access the internet and everything. So, from my small amount of knowledge, that means that the mother board is still ok, right?  I do not believe that I have read anywhere that the motherboard can go bad only at the sata ports. Does anyone know if that is a possibility? Is there a chance that I could salvage the situation by purchasing a set of recovery disks for this specific model and just reinstalling everything? I have heard that they are usually $20 so that would be a cheap trial and error.
    Also, it will make it to the recovery screen sometimes on the blue screen, but it won't do anything because the keyboard stops working at that point.
    Just another tech junkie.
    This question was solved.
    View Solution.

    Hi:
    If you are running the ubuntu from the usb flash drive and not the hard drive, then yes, there is a definite possibility the motherboard sata controller has failed.
    I believe the motherboard in your model is notorious for sata controller failures as is evidenced in these many threads below.
    http://h30434.www3.hp.com/t5/forums/searchpage/tab/message?filter=labels%2Clocation&location=categor...+

  • PC Doctor Error Code BIOHD-2

    HP Pavilion FK484AV-ABA, model m4900t running windows 7 64 bit. RAID-1 setup.
    PC crashed. Cannot restart. On cold boot, received the error message that RAID-1 and both hard drives failed. Ran PC-Doctor and received the following diagnostics:
    CPU, Memory, all hard drives OK.
    Boot Path Diagnostic
    Error Code:     BIOHD-2
    Warning:          No drives detected.
    Suggestion:    Turn off system and verify the drive cables are securely attached.
    Since PC-Doctor verified that both drives were OK, I am assuming that the cables also were OK. Any suggestions on what the problem may be??
    Thanks in advance for your help.
    This question was solved.
    View Solution.

    Go into the BIOS to see if the drives are recognized. Post your results here.
    That is an unusual condition for PC Doktor to report. Normally a BIOHD-2 error code means that a hard disk has failed, but I do doubt that both drives failed at once.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP pavillion Error Code: BIOHD-8

    I have an HP pavillion p6000 desktop with windows 7 with an AMD Athlon II x4 635 processor. I recently downloaded C cleaner to clear up some space, and may have deleted something important. I went to reboot at a point, and my computer would get to the loading screen for windows, an then just reboot over and over. Running the startup repair did nothing, sat there for hours and hours. I accessed diagnostic tools in start up - it scanned my CPU and memory and they passed but the hardrive failed with these details :
    Error Code: BIOHD-8
    Error: A SMART test failed on the drive.
    How can I resolve this issue?

    Hi,
    That's not a good news, the HDD is having big problem. Please do a HDD self test again:
    1. Restart the computer.
    2. Keep tapping the F10 key when the HP logo appears. This will take you to Bios Setup Utility.
    3. Select the Diagnostic tab.
    4. Select the "hard drive self test" option and press enter to perform the test.
       Note: This test may take up to 40 minutes or more.
    Pass - The hard drive is not damaged.
    Fail - the hard drive is damaged and may need to be replaced.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What do i do if i am receiving a error code BIOHD-4?

    i am reviewing BIOHD-4 on diagnostics and a faulty hardware 0x00000e9 message and suggestions

    http://h30434.www3.hp.com/t5/TouchSmart-PC/HP-Touchsmart-with-a-BIOHD-8-error-code-What-does-it-mean...
    I've read quite a few posts about that error message on this forum.  The link above is to one of those threads.
    It doesn't look too good, but your answer is probably in the first couple of posts in that link.
    GeorgeFN
    GeorgeFN
    I work on behalf of HP.

  • Error code: biohd-1

    I have a HP Pro 3130 Minitower Desktop PC.
    Computer will not boot.  F9- diagnostics:
    CPU test passed
    Hard Drive connection test failed error code BIOHD1
    warning drive not detected
    suggestion turn off computer and verify cables are connected
    memory test passed
    I have a tech coming tomorrow
    The most important thing for me is to recover the files on my hard drive: please advise
    thank you

    Hi,
    As already mentioned, BIOHD-1 code means No communication and most of the time reseating the cable helps. I don't think this would damage the HDD.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp pavilion elite m9340 will not boot from hd or cd. i get error code biohd-3.

    Like title says, box won't boot from HD nor from recovery disk, OS- Windows7. BIOS and system diagnostics recognize both drives. I opened the box and unplugged HD SATA cable and was able to boot it from recovery disk. It seems as though something is wrong with HD that won't let system boot correctly. Any help is greatly appreciated. Mike.

    Hi,
    The error code that you are getting normally indicates a bad hard drive. Be sure that the power connector for the hard drive is on tight.  Plug the HD into a different SATA port and see if the same issue occurs. If it does, then you have a bad hard drive.  You might need to hit the ESC key at the HP splash screen to pick the boot device since you moved the cable if you get that far.
    A new 3.5" SATA hard drive under 2 TB should work just fine.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Error code BIOHD-8

    My PC mode; p6330f
    Product # Ay022AA-ABA
    Build ID A1NAv6PrA1
    Not booting, however I am able to run diagnostics pressing F11 and get error BIOHD-8
    I try repair mode but PC freezes and goes to a blue screen and nothing, how do I repair this?
    Search on Google and is it possible the mother board?
    Thanks

    Hi,
    Please do a HDD self test:
    1. Restart the computer.
    2. Keep tapping the F10 key when the HP logo appears. This will take you to Bios Setup Utility.
    3. Select the Diagnostic tab.
    4. Select the "hard drive self test" option and press enter to perform the test.
    Note: This test takes at least 40 minutes with luck
    Pass - The hard drive is not damaged.
    Fail - the hard drive is damaged and may need to be replaced.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • SMART test error code BIOHD-7

    Locking up upon booting. Did the F9 test at start up and got the message BIOHD-7. Have searched this forum for a solution with no luck.

    my friend searched this forum for some answers and  nothing......
    use hirens boot cd. free tool. it has a hdd testing and fixing tools.
    i actually used it today for solving the same problem and it worked.
    about hiren just google it.

  • HP Touchsmart with a BIOHD - 8 error code. What does it mean and what can I do?

    Computer keeps crashing.  Ran diagnostics and it came up with the error code BIOHD -8 for the hard drive.  What do I do?

    Here are the specs and ordering options for your HP TouchSmart IQ526t CTO Desktop Computer. Since this is a configure-to-order model, I have no way of knowing the size of the hard drive in your computer. Please post the size of the hard drive shown on your order slip or in Windows. Sizes available for ordering were;
    320 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    500 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    640 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    750 GB 7200 rpm SATA 3G (3.0 Gb/sec)
    1 TB 5400 rpm SATA 3G (3.0 Gb/sec)
    Here are some detailed instructions on Replacing the Hard Drive in your IQ526T.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • ERROR CODE BI0HD-8 MODEL P6112P WON'T BOOT UP

    my computor will not finish starting up it gave me the error code biohd  it was running good until i did a back up on c drive a guy i know said you are on the wrong drive now it wont run to boot up i get power but the mouse it shuts down right after a couple of seconds also the keyboard some guy tell me its the mother board  its model p6112p  i don't  know what to do i am in the philipines can i trust a tech here
    [Personal Information Removed]

    Normally a BIOHD-8 error, means the hard drive has failed or is about to fail. Sometimes a bad motherboard may cause this error but most bets are on the hard drive.
    Please send KUDOS
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Error code b10hd-8

    can anyone help

    Those typeof codes generally reference that your hard drive is failing.
    So that you understand more, here is a post/reply from other members:
    http://h30434.www3.hp.com/t5/Desktop-Hardware/I-have-error-code-BIOHD-8-and-my-computer-will-not-eve...
    http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-diagnostic-tool-errorcode-BIOHD-8-Harddrive/td-p/16...
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • My toouch smart iq506 is giving off the error message biohd-2

    my touch smart iq506  is giving off the error message biohd-2

    There is quite a discussion about the error message, its meaning, troubleshooting steps, and the results from last year on this forum. Please see:
    http://h30434.www3.hp.com/t5/Desktop-Operating-systems-and/Error-Code-BIOHD-2/td-p/299253
    It will offer some information and solutions for you.
    GeorgeFN
    GeorgeFN
    I work on behalf of HP.

  • BIOHD-7 error code

    after reading some of the forums on this error code i think i will have to buy a new hard drive. i was hoping if i got HP recovery kit i would be able to fix mine. i also got a error code 0xef0003. i tried to use the built in recovey but no luck. now all i have is a black screen that says  no bootable disk. so i have is a 2 part question.
    1. if i buy a new hard drive will i need the recovery kit that HP offers? i dont have any back up disk.
    2. and can i up grade the hard drive? say to a 1TB or maybe 2TB with out doing any other upgrades to the computer?
    OS- Windows 7
    Model- 300-1120
    Product- AY581AA-ABA
    Bld ID- A1NAV6PRA3
    Thank you for your help...
    This question was solved.
    View Solution.

    Btheone, welcome to the forum.
    You are correct that the hard drive failed.  The maximum hard drive supported by Win 7 is 2 GB.  Yes, you need the Recovery Discs provided by HP.
    Here is a guide to help you Recover the system after you replace the hard drive.  Read it carefully before buying the new hard drive.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for