Error code :d0000029 while purchasing Cross court tennis 2 App in lumia

Error code :d0000029 while purchasing Cross court tennis 2 App in lumia , I tried so many times But it is not yet solved. Trial version is working fine, When i tried to buy full game at last movement it is returning error as d0000029

hi
could you go to settings->email+accounts and check if the Microsoft account is correct(does not require attention), and log on to
www.xbox.com and then scroll to the bottom select terms of use and accept the terms. Restart the phone and try to download the game again
Joseph Ndlovu

Similar Messages

  • Getting Error code -2130771961 while Discovering Cross platform server from SCOM 2012 r2.

    Below is the Error
    Unexpected DiscoveryResult.ErrorData type.  Please file bug report.
    ErrorData: Microsoft.SystemCenter.CrossPlatform.ClientLibrary.Common.SDKAbstraction.TaskInvocationException
    Task invocation failed with error code -2130771961. Error message was: Creation of module with CLSID "{ED8C18C7-FEF4-488D-AAAF-830366BF0B40}" failed with error "Illegal operation attempted on a registry key that has been marked for deletion."
    in rule "Microsoft.Unix.HostEntryResolution.Task" running for instance "Linux Resource Pool" with id:"{7337E4AE-136A-1099-B024-2F4633B1AE1A}" in management group "pslmgmt".
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.SystemCenter.CrossPlatform.ClientActions.DefaultDiscovery.InvokeWorkflow(IManagedObject managementActionPoint, DiscoveryTargetEndpoint criteria, IInstallableAgents installableAgents) 
    can some one please help me ?

    Hi Pandit,
    Have you tried restarting the SCOM service on the management server that you are performing the discovery on? Refer below articles for more information.
    http://social.technet.microsoft.com/wiki/contents/articles/4966.troubleshooting-unixlinux-agent-discovery-in-system-center-2012-operations-manager.aspx
    http://www.systemcentercentral.com/forums-archive/topic/scom-2012-r2-discovery-was-not-succesful-for-solaris/
    Thanks,
    Janaka
    Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

  • Error code d0000029

    not able to purchase anything as it shows error code d00029

    I am getting error code d0000029 while in app purchase but when i bought app from store it was successful. Even earlier when i tried in app purchase that was successful. what might be the reason

  • Why is the Error Code 0x8002006E While Burning the Disc?

    Hey there! I don't seem to get through this Issue. I was trying to burn content to a Disc and it failed with the error code 0x8002006E, while the process was almost complete. I came across a few forums and nothing helped much to resolve this problem. Is there someone who knows the exact cause? Is this is a known-issue or anything already being addressed by Apple? Or a work-around to get this resolved? because i also read (did not try) that no third-party applications, as an alternative, solved this Issue. Disappointed! Help!
    Model: iMac (21.5-inch, Mid 2011)
    OS: Lion OS X 10.7.4
    I have the latest software updates and Firmware updates installed.
    Thank you,
    Sivarama Krishnan (kvsrkrishnan)
    <Edited by Host>

    I found this article excerpt:
    The few solution that where found where by calling at Apple and get technical support. There are a few solutions that might work.
    The first one would be Go to users > your computer name / user name > library > Preferences > com.apple.finder.plist and delete this file. Also it’s advised to keep the burn speed at 8x.
    The second solution found that Apple technical support gave is to unplug everything, including the AC power cord and then remove the battery. Press the power button for 10 seconds without replacing the battery or attaching the AC power cord and after the 10 seconds are up replace the battery. After the battery is in slot hold down the following keys with the left hand: Option + Apple (command) + R and with the right hand hold down the following keys: P + Power Button. You will need to hold all 5 of these buttons at the same time until you hear both sets of startup chimes Release all of the 5 buttons after you hear the two startup chime sounds.
    Hope this helps

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

  • Error Code 8024200D while installing update KB3000850 for Windows 8.1

    Error Code 8024200D while installing update KB3000850 for Windows 8.1
    I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
    Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
    You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
    Hi Michelle,
    Thank you for posting your query in Microsoft Community.
    I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
    Is your computer connected to domain?
    Which security software is installed in the      computer?
    Do you remember making any specific change in the      computer prior to the issue?
    This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
    improvements.
    Cause:
    This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
    check the status.
    Method 1: Depending on the architecture of your
    Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
    All supported x86-based versions of Windows 8.1: [link] Download the package now.
    All supported x64-based versions of Windows 8.1:
    [link] Download the package now. 
    Restart is required.
    Method 2:
    If the issue still persists, run the Windows Update Troubleshooter and check the status.
    Click to run
    [link] Windows Update Troubleshooter
    Also refer to:
    [link] Troubleshoot problems with installing updates
    Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
    Regards,
    Niranjan Manjhi
    Dear Niranjan,
    Thank you for your answer.
    To answer your questions:
    1) Yes, my laptop is connected to the domain,
    2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
    3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
    In your answer, you suggested 2 methods for resolving the problem.
    I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
    Potential Windows Update Database error detected Ox800F08F: Not fixed
    Windows Update components must be repaired: Fixed
    And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
    As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
    Michelle
    Hi Michelle,
    Thank you for keeping us updated on the issue.
    Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
    is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
    Please post your question in the link TechNet Forums.
    Regards,
    Niranjan Manjhi

    Hi there @Achintya-only
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
    Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
    Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
    What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
    Please let me know what you find.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • I got the Mac error code -36 while trying to move a backup file

    I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive.  The full text of the error message is:
    The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)

    It's a disk error. Although Apple documentation says you should be able to copy Time Machine backups in the FInder, that doesn't necessarily mean it will work. I suggest that, instead of copying the existing backup, you start a new one on the other drive, and keep the old one. You need more than one backup anyway.

  • Error code 50 while trying to download a font from adobe creative cloud

    I received a error code 50 while trying to download a font from adobe creative cloud saying that the "Creative Cloud desktop failed to update" and that I should contact customer service. How should I resolve this issue?

    Read here.
    http://support.apple.com/kb/TS1279

  • Does anybody know the error code 11 while updating to ios 4.3.3.? thx

    does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx

    but my hard drive is still lot of spaces...still keep on trying to update...

  • TS3694 IVE GOT AN ERROR CODE 9006 WHILE DOWNING TO IOS6 WHAT CAN I DO THIS IS THE FORTH TIME IVE TRIED

    ive got an error code 9006 while downloading to ios6 what can i do to update please ?

    From the link your question was posted from:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006            
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • TS1424 I get error code 1009 while trying to download an application from app stor

    I get error code 1009 while trying to download an application from app storp

    You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
    Regards.

  • I am getting Error code : 50 while installing update on CC

    I am getting Error code : 50 while installing update on CC@

    Please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve your current error.
    Regards
    Rajshree

  • Getting Error Code U44M1P7 while upgrading, how do I correct?

    Getting Error Code U44M1P7 while upgrading, how do I correct?

    Which product's update you are trying to install?
    Is it from Creative Cloud or perpetual?
    Please check following if you are having Creative Cloud.
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Received HTTP error code 400 while fetching source feed. - Just Started 2 weeks ago; preventing iTunes podcast from updating

    Good day.
    When trying to update my feed http://feeds.feedburner.com/SpiritLedSpiritFed, I received an HTTP error code 400 while fetching source feed message. Nothing has changed on my end as I've been using Dropbox for the feed and the files since last year and was able to successfully update the feed up to two weeks ago.
    I did run through all the tools on the Feedburner page (validator, podmedic, feedmedic) received a clean bill of health on the feed and I've looked at both Feeburner's site as well as Dropbox's support page to see if anything could have changed (requiring https or some other format for the feed), but no luck so far.
    The strange thing is that on the feed itself, it's listed as http://dl.dropbox.com/s/xxxxxxxxxx/xxxxxxxx.xml.  However, when I tried to 'RESYNC' it, the 400 error was displayed and it's listed as https://dl.dropboxusercontent.com/xxxxxxxxxx.xml which is says it cannot reach.
    Any suggestions would help as I've not been able to update my iTunes podcast for two weeks now.
    Thanks

    The URL you give redirects to https://dl.dropboxusercontent.com/s/466rh3k2kw7f6jr/SpiritLedSpiritFed.xml
    This appears to be a viable feed. However it contains this tag:
    <itunes:new-feed-url>https://www.dropbox.com/s/466rh3k2kw7f6jr/SpiritLedSpiritFed.xml</itunes:new-feed-url>
    That will redirect iTunes (though nothing else) to the enclosed URL, and that is a web page containing a display of the feed and a download button, which is no use to iTunes. Consequently on attempting to subscribe in iTunes with any of these URLs the feed comes up empty. You need to get rid of these redirects and provide a direct link to the feed file; and you should not use https (encrypted connection) but http. Also, Dropbox isn't a good place to host your files, but if you really must use it you have to serve as a direct access in the same way as a web page, not as sharing. You have your media files on Dropbox as well, and the URL redirects to an https version, though it does play in a browser. This itself may cause problems; and if your podcast gets popular you will run into problems as Dropbox isn't really geared to do this sort of thing.

  • Error code 0x80020000 while trying to burn a disc? What does this mean?

    error code 0x80020000 while trying to burn a disc? What does this mean?

    Take a look under 'More like this' to the right on this page.

Maybe you are looking for