Error code from easy setup
I am getting a similar message as others here, but my downloads are more updated: Error code: 82BD0102
Error description: The connected gateway is not a Valet.
Model name: unknown
Model number: M10
Serial number: CVJ01K643036
Firmware version: unknown
Operating system: Windows 7 SP 1
Software version: 1.4.11266.0
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: unknown I have had the Valet since early 2012 and it has worked reasonbaly well not perfect but well. I have a Grace Reciva internet radio and that went all to hell for me about a week ago, I was ready to put it in mothballs until I decided what we wanted to use as an alarm without the screeching of local radio. Then I found out I had other problems, my cell phone which is through Republic wireless and worked perfect since we bought it a short while ago, it will download my email, but won't go to the internet, and forget about Pandora or other streaming. I have another notebook that is connected by way of a wired router, but also picks up the Valet when it is turned on started to give me warnings of ip conflicts but it still worked so I just ignored it, but if I take it off the wired router I found I can't get to the internet with that one either. So I tried to run the easy set up key from the Cisco Valet router, but it is giving me the error message above. In spite of it I am able to get the Grace Reciva radio to work now, but the internet on the phone and notebook problem remain the same. Does anyone see anything here that might explain my problems?
Last night it really fell apart, I totally lost the internet whcih took me a little while to realize it was the provider. The only thing still giving me problems is my cell phone and we have to check the tablets. I did do a factory reset on the router, and maybe the phone is not getting the correct information although it says it is connected to my wireless router. It jsut won't connect to the internet on the phone and I imagine the streaming apps. If I figure that one out I will post it here.
Similar Messages
-
Hi All,
I was trying to develop C++ web service using GShop with Visual Studio 2005.I refered a tutorial :-
http://guruce.com/blogpost/hosting-webservices-on-windows-embedded-compact-windows-ce-using-gsoap .
AS per the tutorial i proceeded. But, i stuck-up when making a custom build with Helloworld.wsdl.Here is the output :
1>------ Rebuild All started: Project: HelloWorldWebService, Configuration: Debug Pocket PC 2003 (ARMV4) ------
1>Deleting intermediate and output files for project 'HelloWorldWebService', configuration 'Debug|Pocket PC 2003 (ARMV4)'
1>Performing Custom Build Step
1>'D:\Test' is not recognized as an internal or external command,
1>operable program or batch file.
1>Project : error PRJ0019: A tool returned an error code from "Performing Custom Build Step"
1>Build log was saved at "file://d:\Test Code\HelloWorldWebService\HelloWorldWebService\Pocket PC 2003 (ARMV4)\Debug\BuildLog.htm"
1>HelloWorldWebService - 1 error(s), 0 warning(s)
========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
As given in the tutorial i kept my custom build command line as : -
$(SolutionDir)\gsoap-2.8\gsoap\bin\win32\wsdl2h.exe -s $(InputPath) -o $(ProjectDir)$(InputName).h
and outpouts : $(InputName).h
I kept GSHOP in the project filder :- D:\Test Code\HelloWorldWebService
Kindly help.
JyotiranjanHi Jyotiranjan,
I’m glad to hear that you got it working.
Thank you for sharing your solutions
experience here. It will be very beneficial for other community members who
have similar questions.
Best regards,
Lucy
Lucy Liu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
How do i resolve error code from hardware test
How do I resolve error code from hardware test.
by bringing your mac to your local Apple store or AASP for repair.
-
When I try to Export, I get an error code from compressor (-1)?
I have battled with this issue now for days and I dont know what else to do, I just recently installed the OSX Mavericks beta 2, however I do not think this is the problem
I am running a 2012 15" 2.6 i7 Quad Core, 8Gb ram MBP (With problem export problem)
I also have a 2011 iMac, 2.7 i5 Quad Core, 12Gb ram (no problems)
I have never had issues with FCPX like this before and It still runs perfectly other than the fact that EVERY single option under the SHARE toolbar is frozen.
It gives me an error code from compressor saying that it coudnt be sent to it (Compressor 4). I tried re-installing it and deleteing the preferences. I tried to trash the preferences in FCPX, I tried deleting all the render files, I tried shutting down FCPX and re-opening it many times, I checked for any damaged video/audio, and NOTHING has worked. Please HelpWhere did this disk image come from? The application has no installer. It installs directly into the Applications folder from the App Store. Are you trying to run the application from the disk image?
-
Internal error - code 302 on setup
WRT610N router - Vista operating system
I had to format and reinstall Vista and am attempting to re-install the setup software that came with my router. Each time I try, the installation stops and an error message tells me there has been an internal error with 302 as the error code. Any ideas as to what this error code is and what I can do to get around it? Tried 192.168.1.1 using my original username and password, but all I get is a page that says 'authorization required.' I am not knowledgable in router setup or operation and I have reviewed previous replies to error code 302 problems. None were halpfull.Reset your router and start it from scratch...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Don't use the CD to install your router...You can configure your router manually...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link -
The SMTP Error Code from a message that was not sucessfully delivered ?
hello,
I'm developing an aplication that uses Java Mail and
send emails, but I need to get the error code if this
email was not sucessfully delivered, use
mail.smtp.dsn.notify to destination return an email in case
of failure.
Thaks for your help.
rania+Do you mean the SMTP server reply codes? These are the codes that are returned when the client tries passing the message to the server. The are from RFC 821 (http://www.ietf.org/rfc/rfc0821.txt).
500 Syntax error, command unrecognized
[This may include errors such as command line too long]
501 Syntax error in parameters or arguments
502 Command not implemented
503 Bad sequence of commands
504 Command parameter not implemented
211 System status, or system help reply
214 Help message
[Information on how to use the receiver or the meaning of a
particular non-standard command; this reply is useful only
to the human user]
220 <domain> Service ready
221 <domain> Service closing transmission channel
421 <domain> Service not available,
closing transmission channel
[This may be a reply to any command if the service knows it
must shut down]
250 Requested mail action okay, completed
251 User not local; will forward to <forward-path>
450 Requested mail action not taken: mailbox unavailable
[E.g., mailbox busy]
550 Requested action not taken: mailbox unavailable
[E.g., mailbox not found, no access]
451 Requested action aborted: error in processing
551 User not local; please try <forward-path>
452 Requested action not taken: insufficient system storage
552 Requested mail action aborted: exceeded storage allocation
553 Requested action not taken: mailbox name not allowed
[E.g., mailbox syntax incorrect]
354 Start mail input; end with <CRLF>.<CRLF>
554 Transaction failed -
How do I return error code from a DLL?
I have a C++ DLL that can throw an exception. In the C function interface between LabView and the C++ class, I catch exceptions so they don't go up to LabView. But I want to get the error to the calling VI. Is there a way to get an error code into the error bundle that comes out of the Call Library Function Node so that I can feed it to the simple error dialog box? The exception has a string that describes the error and where it came from. Or should I just make every DLL call return an error string (empty string if no error)?
Thanks,
Keith.Normally the convention is to use an integer return code with a return code of zero meaning no error. You can then create an error cluster based on this return value. The best thing to do is to have a "Error Code Check" subVI that you plop down each time. The error cluster for the Call Library Function function will tell you of problems with the LabVIEW <--> DLL interface. In fact, earlier versions of LabVIEW did not have an error in/error out cluser for that function. I'm not aware of being able to automatically set the error out cluster for the Call Library Function function. With the .NET interface it's different. If the method throws an exception you get the error out cluster with the error code of 1172 I think.
-
Hi,
I'm using Matlab script node to interpolate a 2D Surface. But sometimes it shows an error and close the program.
The error message is not always there. It appeared when I gave it some specified "XLength" or "YLength".
Here is the error message:
Error 1050 occurred at LabVIEW: Error occurred while executing script.
Error message from server: ??? qhull precision error: initial facet 2 is coplanar with the interior point
ERRONEOUS FACET:
While executing: | qhull d Qt Qbb Qc
Options selected for Qhull 2003.1 2003/12/30:
delaunay Qtriangulate Qbbound-last Qcoplanar-keep _pre-merge
_zero-centrum Pgood Qinterior-keep _max-width 1e+003
Error-roundoff 1.4e-012 _one-merge 9.7e-012 Visible-distance 2.8e-012
U-coplanar-distance 2.8e-012 Width-outside 5.5e-012 _wide-facet 1.7e-011
The input to qhull appears to be less than 3 dimensional, or a
computation has overflowed.
Qhull could not construct a clearly convex simplex from points:
The center point is coplanar with a facet, or a vertex is coplanar
with a neighboring facet. The maximum round off error for
computing distances is 1.4e-012. The center point, facets and distances
to the center point are as follows:
facet
p4
p20
p0
distance= -1.1e-013
facet
p24
p20
p0
distance= 0
facet
p24
p4
p0
distance= 0
facet
p24
p4
p20
distance= 0
I hope, I can get some advises here. Thanks in advance!
Attachments:
Snap.jpg 23 KBHi,
I think you are using LabVIEW 8.5. There are some bugs in LabVIEW 8.5 which cause the 'linear' and 'cubic' options of griddata to return incorrect result. Fortunately, we have already found these bugs and fixed them. If you got a chance to try the LabVIEW 8.6 Platform Beta, you could verify the fix. Here, I attach some snapshots of the result for the 'cubic' option of griddata with the fix. I specify the XLength and YLength to 1000. Are these the results you want?
As to the crash problem, I am unable to reproduce it on my machine. I follow the instruction to set XLength to 1000 and YLength to 880. All combination of method and option of griddata work well. Therefore, I do not have any idea about it. Maybe, you can try to reinstall the LabVIEW software.
I do not have access to MATLAB software. Hence, I am unable to run your code with MATLAB Script Node.
Many thanks!!!
帖子被ttrr在03-18-2008 08:39 PM时编辑过了
Attachments:
spline.PNG 28 KB
nearest.PNG 28 KB
linear.PNG 26 KB -
How to get an error code from from calling sqlplus from shell script?
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Thanks!user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman.... -
Mapping error code from Business service to Proxy
I am trying to get hands on with 11g and following the book Getting started with Oralce 11G soa suite. The example I have described is based on chapter 11 and chapter 14. I have a proxy service and business service. The business service calls a "ValidateCC" composite which validates the credit card information passed and is proxied by the proxy service. The validation of CC is done by a stored procedure, which returns an error ora-20001 if the credit card info is not found in the database.
Testing PROXY service from OSB console:
Here is the REQUEST message sent to proxy service:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<cca:creditcardStatusRequest xmlns:cca="http://www.globalcompany.com/ns/CCAuthorizationService">
<cca:CCNumber>2234-1234-1234-1234</cca:CCNumber>
</cca:creditcardStatusRequest>
</soapenv:Body>
</soapenv:Envelope>
Here is the response message received:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380001: Internal Server Error</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380001</con:errorCode>
<con:reason>Internal Server Error</con:reason>
<con:location>
<con:node>RouteTo_validationForCC</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Testing Business service from OSB console
Response received for the same message:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'validateCC' failed due to: Stored procedure invocation error.
Error while trying to prepare and execute the VALIDATECC API.
An error occurred while preparing and executing the VALIDATECC API. Cause: java.sql.SQLException: ORA-20001: UNKNOWN CREDIT CARD
ORA-06512: at "SOADEMO.VALIDATECC", line 12
ORA-06512: at line 1
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</faultstring>
<faultactor/>
<detail>
<exception>
ORA-20001: UNKNOWN CREDIT CARD
ORA-06512: at "SOADEMO.VALIDATECC", line 12
ORA-06512: at line 1
</exception>
</detail>
</env:Fault>
</env:Body>
</env:Envelope>
What i need:
I would like to have the exception 20001 populated in faultcode of the response from proxy message. A down stream BPEL process checks the faultcode and processes the message as needed.
My OSB message flow contains :
ValidateCredit +> envelope
PipelinePairNode1
Request Pipeline
Report and Validate
Response Pipeline
RouteTo_validationForCC
Service Error Handler
stage1 with Alert action.
My question is how to map the actual error occured in the cally be business service handler to the Service error handler in stead of throwing a generic BEA error. Please let me knowThank You Swgt for your reply.
This is what I did:
When I'm in Edit mode, in the OSB Web Console, I go to my proxy service, click on the Edit Message Flow icon, in the Map of Message Flow window I left-click on my Route icon (which as you already mentioned routes to my Business Service), select Add Route Error Handler (this option only appears if you're in Edit Mode already), click on the Error Handler icon, Add Stage, click on the Stage icon, Edit Stage, click on Add an Action, Flow Control -> Reply. Here I select the Radio Button "With Failure" and then Save All and Activate the change for the session.
Is this correct?
I tried this. I no longer get the BEA-380001 error code. However, the fault returned is not a bindingFault as I would have expected, but rather a remoteFault. hence my fault policy never detects it, doesn't rethrow it, and my BPEL error handling never kicks in.
Is there a way to change this to work more or less in the sense of the tutorial?
Does using OSB to connect to the service automatically make it a remote fault, instead of a bindingFault?
Here's the SOAP message handled by my BPEL Component.
<messages>
<input>
<invokeCCStatusService_execute_InputVariable>
<part name="part1">
<creditcardStatusRequest>
<CCNumber>2234-1234-1234-1234</CCNumber>
</creditcardStatusRequest>
</part>
</invokeCCStatusService_execute_InputVariable>
</input>
<fault>
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>Beim Aufrufen des Bindings ist eine Exception aufgetreten.
Beim Aufrufen des JCA-Bindings ist eine Exception
aufgetreten: "JCA Binding execute of Reference operation
'validateCC' failed due to: Fehler beim Aufrufen von
gespeicherter Prozedur. Beim Versuch, die VALIDATECC-API
vorzubereiten und auszuführen, ist ein Fehler aufgetreten.
Beim Vorbereiten und Ausführen der VALIDATECC-API ist ein
Fehler aufgetreten. Ursache: java.sql.SQLException:
ORA-20001: UNKNOWN CREDIT CARD ORA-06512: in
"SOADEMO.VALIDATECC", Zeile 12 ORA-06512: in Zeile 1 Prüfen
Sie, ob die API in der Datenbank definiert ist und die
Parameter der API-Signatur entsprechen. Diese Exception wird
als nicht wiederholbar betrachtet. Sie ist wahrscheinlich auf
einen Modellierungsfehler zurückzuführen. Um den Fehler
stattdessen als wiederholbar zu klassifizieren, fügen Sie die
Eigenschaft nonRetriableErrorCodes mit dem Wert "-20001" zum
Deployment-Deskriptor hinzu (d.h. weblogic-ra.xml). Um einen
wiederholbaren Fault automatisch zu wiederholen, legen Sie
folgende Eigenschaften von composite.xml für diesen Aufruf
fest: jca.retry.interval, jca.retry.count und
jca.retry.backoff. Alle Eigenschaften sind Ganzzahlen. ". Der
aufgerufene JCA-Adapter hat eine Ressourcen-Exception
ausgelöst. Prüfen Sie die obige Fehlermeldung sorgfältig, um
eine Lösung zu finden.</summary>
</part>
<part name="detail">
<detail>
<exception>ORA-20001: UNKNOWN CREDIT CARD ORA-06512: in
"SOADEMO.VALIDATECC", Zeile 12 ORA-06512: in Zeile 1</exception>
</detail>
</part>
<part name="code">
<code>{http://schemas.xmlsoap.org/soap/envelope/}Server</code>
</part>
</remoteFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages> -
How to obtain error codes from LDAP exceptions
Is there a way to obtain the error codes returned by LDAP services. In our application, we want to give more understandable messages and solution to rectify the issues, for the exception thrown while accessing LDAP. The NamingException does not contain error codes. Is there a way to obtain the error codes? If not, is there a neat way to handle this?
Thanks in advance
Sankar
Edited by: sansun08 on Nov 14, 2009 9:40 AMHuh?
If it says ignore duplicate keys then that would suggest to me that it isn't an error. If there is no error, then you won't get an error.
So if you want an error then either remove the ignore or explicitly do a query first and create your own error if the id is already there. -
Using error codes from executables in chain rule logic
Hi,
Any help on this would be appreciated.
I have a chain with a mixture of external (shell script) & plsql programs.
The shell script returns 3 possible exit values: 0 (successful) ; 4 (warning) ; 8 (failed).
I want to incorporate an error code into a chain rule so that if the step returns a particular error code (4); then the chain should not process any of the other steps but exit at that point.
I can get it to exit if I use a rule like: condition; 'step1 FAILED' with an action of 'step1.error_code' but this caters for both error codes 4 & 8.
What I want to say is:
condition: 'step1 FAILED and step1 error_code = 4' with an action of 'END'.
This does not work since the returned error code (in JOBSCHEDULER_JOB_RUN_DETAILS.additional_info is ...ORA-27369..., even though the JOBSCHEDULER_JOB_RUN_DETAILS.error# shows a value of 4.
I have not posted any code at this point as I was wondering has anyone else had a similar issue and if anyone knows how to do this.
thanksHi Mike_King
Here is a VI snippet that I created with two different approaches, in the first one I used the format into string, the second one the function search and replace.
Here are some links with information about the functions that I used.
Format Into String Function - LabVIEW 2011 Help
Search and Replace String Function - LabVIEW 2011 Help
Regards
Esteban R.
Attachments:
Generate error code.png 34 KB -
[CS3 SDK] Error "A tool returned an error code from"
Hello!!!
I'm starting to develop plug-ins on InDesign using the first exercise of tutorial (WriteFishPrice) with VisuaStudio C++ 2008 ExpressEdition.
When I try to compile my source I got this message:
In compiling error does not occur none (0 Failed, 0 warnings, 0 skips)
In compiling error does not occur none (0 Failed, 0 warnings, 0 skips).
To me it describe that me code are working fine, but the PlugIn does not work, it is generated, but when put in the plugins folder of InDesign gives error to start.
(Adobe InDesign cannot load the WRITEFISHPRICE.PLN plug-in. The WRITEFISHPRICE.PLN plug-in requires the debug version of InDesign. Please contact the vendor to get a compatible version of WRITEFISHPRICE.PLN)
I'm posting the low response from the compiler, if someone could help me I would be grateful.
http://www.denisramos.com/sidnei/BuildLog.htm
ThanksFrom the build log, you have a build events which are trying to execute
odfrc and merge_res.cmd.
both are in the SDK bin folder; for me it's C:\Adobe\CS2SDK\devtools\bin
You need to add the path to the equivalent folder either for the project in Visual Studio.
I'm surprised you have a pln created, but in any case the resources won't be correct. -
Error message from itunes setup assistant
When I open iTunes to sync my iPod-Touch, I get an error message regarding the registry and suggest that I re-install iTunes.
Message: Warning. The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
OK
I have reinstalled iTunes but the message continues.
I do not burn CD's but I would like to have this message quit showing up. What do I need to do.
Thanks in advance.
GaryAZThank you for your response. I followed the regedit procedures. There were no lowerFilters Key or UpperFilters Key. There also was not a Value data field. When right clicking in the field, I have an option menu that allows for "new" entries. My options are as follows: Value - Key, String Value, Binary Value, Dword (32-bit) value, Qword (64-bit) Value, Multi-string Value and Expandable String Value. Do any of these Values meet the criteria of the Value you are suggesting, and if so, which one could I use if I chose a "new" value for the GEARAspiWEM?
When the ITunes was first installed I was not able to access the DVD drive, and found a solution on a web page, so at that time I deleted the LowerFilters and UpperFilters, but do not remember any changes to a value entry, if there even was one at that time.
Gary -
FCE: I'm missing DV convertor option from Easy Setup
I've had to reinstall FCE on a couple of machines. After the install, under the easy set up, I no longer have the DV convertor option. Did I do something wrong in the set up? How do I find these options?
Thanks for all your help. You were right. Version 1 did not have the DV converter. I had to go and download to version 1.0.1 and now I'm good to go. Thanks again!!
For anyone else who has this problem go to http://docs.info.apple.com/article.html?artnum=120329
This is where I found the update.
Maybe you are looking for
-
I have two Officejet 6500a's. How do I get them both to work with my laptop?
I now own two Officejet 6500a plus All-in-One printers. I take my laptop back and forth between where they're located. I have the driver on my laptop, and it works with one of them, but how do I make it recognize the second one...and also not then
-
How do i change a pdf in preview to a word document in pages?
Does anyone know how i return to work on a word document within pages as i'm currently viewing it as a pdf in preview.
-
I have a Macbook, my wife just purchased an Ipad2, Home network
I have a macbook, my wife just got the ipad2 today. She joined our home network. I thought that because these are both apple products I would be able to see the ipad in the finder viewer? I have a cisco home router, not an apple router. Should I not
-
2.1 RC1 templates converted to lowercase ?
In 2.1 RC1 I have correctly recovered my templates from 1.5, which are using a mix of lower/uppercase. It is important for me because I have some templates for such things as: call connect_me_to_some_place("IdentiFier MixIng CAseS"); When I auto-comp
-
'Search iphone' having problem
I have iphone 4S. 'Search iphone' screen is great to use. Managed to get into contacts so quickly with this. But, recently this doesnt works so well. Sometimes, shows nothing while i typed in 'search iphone'. Do anyone come across this problem? Or am