Error code kernel data inpage , memory management , 0xc000021a , 0xc00000e9 on windows 8

Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD.  Plzz help me to get out of this problem.
I can't even access my laptop and I am using my windows phone to post this.

Hi everyone I am sahasvat.I am using Acer aspire 5755. It's specification are Intel i3 3rd gen processor, 2Gb DDR 3 ram and 500 GB hdd.I am running on windows 8 OS. I opened about 4 tabs on google chrome and suddenly a blue screen with sad face displayed
an error kernel data inpage and it got restarted and after 5 mins I opened google chrome and again blue screen came and displayed an another error memory management and while restarting on bios I pressed f8 and booted to safe mode as normal
mode didn't open.soon after 20 mins I restarted my lap and I received an error 0xc000021a bios and windows booted.i then pressed power button for a min and switched on my pc but it showed a different error 0xc00000e9. I restarted many times
either 0xc000021a or 0xc00000e9 used to come not an fixed error. I don't have my cd as it got scratches on CD.  Plzz help me to get out of this problem.
I can't even access my laptop and I am using my windows phone to post this.

Similar Messages

  • Kernel data inpage error beim ideapad s400

    Hallo, ich versuche schon seit drei Tagen das Upgrade von Windows 10 zu installieren.Zuerst wurde das Upgrade vom Windows Updater abgebrochen und es stand lediglich "fehler" hinter dem Punkt "letztes Update am:"Mittlerweile ist es so das der Rechner neu startet das Update laden tut und dann mit dem Hinweis: es ist ein Fehler aufgetreten, ein Neustart ist erforderlich.Darunter steht dann: ich soll nach dem kernel data inpage error googlen für weitere Infos. Habe schon CHKDSK ausgeführt  TuneUp und zwei Regcleaner laufen lassen ohne Erfolg. Evtl. kann mir ja hier geholfen werden. Hoffe ich. :-/ Mfg René

    also im minidump ist nur ein ordner. hoffe mal ie screenshots sind richtig. so hoffe mal das ist richtig so hab einfach mal die ganze Liste rein gestellt evtl. existiert ja der Fehler schon länger u war nur noch nie relevant.

  • Error - Update Product Data in Solution Manager

    Hello,
    We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
    Error : Update Product Data in Solution Manager
    Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
    Any information is highly appreciated. Thank you.

    Hi Jaypee,
    Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
    Extract from this guide for this problem:
    Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
    Thanks
    Sunny

  • Snow Leopard 'error code 50', 'Low Application memory'. Help.

    Hi.
    I've been facing **** lot of problems with my MBP of late, and all that I could try have turned unfruitful. I'd appreciate some help.
    Problems started when I downloaded and tried to install SL update 10.6.7 on 10.6.6. It was working fine on 10.6.6. The update failed, and I received 'error code 50' very often while deleting files from Trash. Also, 'beach-balling' became more frequent, and I had to force quit applications very often because of 'low application memory' box being displayed.I also encountered the grey screen prompting me to 'press power button till shut down and restart'.
    Finally, I tried a clean reinstall but the same problems persisted, and lots of applications stopped working. I could not download files from browser (Low disk space, despite a 100 GB space available on he HD) or save textedit, Office or iWork files. I did a clean reinstall again, with zero-erase option and again downloaded the 10.6.7 combo update. The 'Software Update' application failed. I downloaded the update from my browser and it was installed successfully finally after 4 system restarts, but the 'error code 50' problem still persists.
    What am I doing wrong? I've been dealing with this abnormal performance for more than a month. I haven't backed up files because there is no use making a backup of corrupt system. Specs : MBP'09, 13.3". 2.26 GHz, 160 GM, SL 10.6.7.
    Please advice.
    Regards.

    I tried to run the hardware test by inserting the Applications Install dvd and pressing 'D' just after the chime. It did not run. Nevertheless, the App DVD is ejected every time I insert it in to install some apps, like iLife etc. Running Disk Utility dies not work, as it says the 'disk cannot be mounted'.
    I tried another clean reinstall of SL 10.6, and some of the funny stuff are :
    1. error code 50 yet again
    2. It won't allow me take snapshots, saying 'You do not have permission to save snapshots etc.."
    3. Safari cannot download files
    4. 'Low Application Memory' message box appeared a few times, prompting me to Force Quit Safari.
    Could there be something wrong with the Install DVD? Though Disk Utility First Aid shows error free HD verification.

  • Error Code A12E4 with Adobe Application Manager

    I have been on the 30 day trial of the Creative Cloud, and have now just signed up for my membership.
    I went in to download more apps and check for updates on the ones I already have.  No matter what I try to download, it of course opens the Adobe Application Manager as it should, but then the Application Manager tries to update.  It then errors out, and this is what I get:
    We've encountered the following issues:
    Sorry, the program is not responding correctly (Error code: A12E4).  For troubleshooting tips, please visti our customer support page.
    I am on a Macbook Pro, running 10.8.2
    Any help would be greatly appreciated!

    Please try reinstalling the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.

  • Error code with download of application manager

    Error code A12E1
    What does this mean?
    I can't complete downloading the adobe application manager because the message suggests I contact customer support.
    How can I fix this please?
    Bianca

    Try the direct download links for AAM found in this article
    http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html

  • JNDI - error code 49 data 531

    Hi.
    I'm trying to connect to MS AD Server (2000/2003) through LDAP. I receive error code 49 with data 531. This means that this is not valid workstation but credentials are valid. My question is how to authenticate using specified host from which I may log in? Is it possible with JNDI? The problem is with AD restrictions but i would not to switch them off.

    This is another one of those posts that are so hilariously funny, it beggars belief.
    You are trying to execute an LDAP query, from a workstation for which the specified credentials you are using in your Java application, is not permitted to login from.
    And you want to find out if you can subvert the security policy for your domain ?

  • Error Code in data loading

    While loading data into the GL module from the GL interface table the error code - R_LEZL0113 appears in the log. What does this represent?

    Hi, San,
       If check SCP for code page "4110" and "1100", they are return thousands of records, no idea of which one cause the conversion problem.
    Regards
    Jie

  • What I should do when my iphone 5 has an error code 31 in shown device manager of my laptop?

    My iphone 5 does not recognize as a personal device in my laptop however it is recognize in itunes and it is charging once I connect it to my laptop. In device manager of my laptop, my iphone icon under personal devices it has an exclamation point and checking further details, an error code 31 is being detected. I've to uninstall and disable this from the device manager but it cannot be completely install because of this error code 31.

    Hello don muchie,
    The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • Error Code SBL-DAT-00327

    Hi All
    What is Errot Code SBL-DAT-00327. How can i over come this to view Home Page for Siebel Hospitality Application in 7.7 version.
    If you have any idea about this please share with me.
    Thanks
    Venkat

    Hi
    The license keys you have does not allow you to view the Home Page view. You should login to supportweb and have a look at the details for the error number there:
    https://ebusiness.siebel.com/supportweb/
    Axel

  • Error Code, not using a memory card

    I cannot send any documents from my laptop to the printer. There is an Error Code that says "Please Use Only One Memory Device At a Time" also the network light is flashing blue. 
    I am not using a memory card at all, just laptop to printer PLEASE HELP!

    Hi TE8762,
    I would like to help you with the symptoms your printer is experiencing. What model is it? Finding Your HP Product Model Number.
    While I wait to hear back from you, please ensure the printer is connected directly to a wall outlet and perform a power reset. To perform a power reset, leave the printer on and unplug the power cable. Leave the printer unplugged for at least 1 full minute then reconnect the power cable.
    This alone may resolve the issue, if not let me now which printer it is and we can go from there. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Error 41 - Kernel Power in event log after clean shutdown - Windows 8.0

    HP Envy H9-1405A - 16MB RAM,  Windows 8.0, and up to date with updates. (16 months old but under extended h/w warranty).  All user data backed-up daily.
    After problems earlier today I noticed that after a controlled shutdown and start from cool (ie on/off button on PC, not mains power at the wall) the startup took over 10 minutes.  Event browser showed error 41 - Kernel Power - "after system crash or lost power unexpectedly",  which it definitely hadn't as I was testing a controlled shutdown.
    When starting from overnight sleep mode this morning it came up with  blue screen and an error mssage something like 'hard disk driver error', or similar (before first coffee so I wasn't really awake).  PC wouldn't restart in anything like reasonable time until powered off at wall, after which it struggled up and ran normally for a while.  Went out for a couple of hours and on return again the PC wouldn't re-start from sleep mode.  Again used the wall power switch to effect the restart and PC and after very slow restart it ran normally.  Event log showed Startup Repair ran due to a corrupted registry hive, and reboot used an earlier version.
    Checkdisk ran clean and the HP Support Assistant diags just looped for ever.
    I then tried a system restart, which worked but took a long time, and then a controlled power down and start from cool which also took a long time as described above.  I've temporarily turned off sleep mode so as to keep working.
    Question - do I have a transient software problem which might be fixable with Recovery, or failing hardware that should be covered by warranty, and where might I find some hardware diagnostics to show to the supplier?  Thanks.

    Hello @mikerb,
    I have read your post on how your desktop computer is displaying an error message in regards to a Kernel event log, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first". This should help to resolve the critical error message.
    Just to be on the safe side, I also suggest following this resource on Testing for Hardware Failures (Windows 8); which should help determine if there is a hardware defect with one or multiple hardware components on your computer.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How do I fix an error code 0x000000c1 when install a printer officeject 6500 with windows 7 64bits?

    I am having a problem try to restall my printer back onto my Laptop Windows 7 system. I continue to get the completed down load and on the last step the error code comes up with 0x000000c1. Can someone help please?

    Sorry that you are having a problem with re-installing the software and drivers for the printer. 
    How are you uninstalling your product? It may still have old software on the computer, and it's getting confused between the re-install. 
    Try the link below to perform a L3 uninstall. Then re-install again. 
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/Uninstall-Software/m-p/2...
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Error code 1321 when I try to install update  in Windows 8.1

    I can find a solution for that error code on Adobe web site, however it only covers up to Win 7.  It says I need to update user permissions and I am not sure how to do it in Win 8.1 .
    Perhaps Adobe could add a "Update user privileges in  Win 8.1"  to the solution

    Please refer to :
    Error code 43 when i download creative cloud ver 1.7.0.413
    Getting error 43 when trying to update Creative Cloud.
    They have important instruction.
    Regards
    Rajshree

  • How to save large amount of data and memory management

    hi guys,
    I prepared a vi to take measurement of temperature and pressure simultaneously from Agilent 34970A with 34901A. The sampling rate is 1 sample/per second for each channel (20 temperature channel and 2 pressure channel (current). The device has 20 channels and most probably the test will lasts 2 days. So, it means 86400 sample per day totally. Could the attached vi  do this task? I really do not know how the "write to text file.vi" works and use the memory of the pc. And after collecting all data, could I export these data to microsoft office excel to analyse safely? And I really do not know can I work this vi without interrupting. is it possible? I am also open for all other suggests relevant the vi, too. And I wonder that is it possible to build a standalone application to take measurements from DAQ devices (here Agilent 34970A-34901A)  by a pc without labview?
    Egemen
    Attachments:
    Agilent_Labview_v2.4.vi ‏85 KB

    Hey,
    What I meant by check for an error while measuring is the following:
    you start the program
    If one of your Agilent VIs returns an error (maybe bad initialisation or so) you will still try to continue to measure.
    Even if it is not working, you still continue measuring. Instead you could also check at the end of each loop if an error occured, like this:
    this will only look for an error and stop right away. If you encounter typical errors with apperatus you might want to handle it. A sufficient way to do so might be a state machine that just re-initializes the setup if an error occurs and then continues with its task. Check out this article: http://www.ni.com/white-paper/3024/en
    Anyway, I would recommend to just try it out and see what problems arise, as you might spend hours of improving well working code (:

Maybe you are looking for