Error code occurs while doing copy data from form to table
Error Code: -V: RABAX_STATE -e:UNCAUGHT_EXCEPTION
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE
there was an error in your program lines
Please analyze the error and you can found the exact line of error in ST22 tcode
Once you open the st22, select your error and double click on it, then in left hand panel select " Source code extract".
then you wiil see your prg lines...
you will see the arrow like >>>>> in front of exact line error.
As per your errror seems, you have missed the node declaration part , some like that..any how check in st22
Regards
Srinivas
Similar Messages
-
Raw Read Error Rate, Errors occurred while reading raw data from a disk
hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
MohammadHello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Error occured while extracting the data from BSIK Table
Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima -
Error MUT-02041 : While exporting the data from Java system.
Dear Friends,
When exporting data from Java system (source system) using SAPINST. We are getting
the below error in 4 of 5 (Archiving SDM Repository) stage.
Error :
MUT-02041 SDM call of createsdmkitjar ends with returncode 2
With this, I am unable to proceed further. Please help me on this to proceed further.
Thanks in advance,
regards,
SrinivasHi All,
I could find the below error log from sapinst.log file.
=============
Info: Exclude components as specified
in /usr/sap/IPD/DVD_JAVA/51033746_1/Installation_Master_6.20_6.40_05_08/IM_AIX_PPC64/SAPINST/COMMON/INSTALL/JMIG/EXCLUDE.XML
Info: Resulting JAR
file: /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
Info: No temporal directory for packing is provided. SDM home directory
will be used.
Info: Pack directory exists already. Remove it first.
Info: Start packing the components of com.gsk in
packedOrigin_com.gsk.jar
Info: Create /usr/sap/IPD/JC02/SDM/program/pack/packedOrigin_com.gsk.jarInfo: The components of com.gsk were successfully packed in
packedOrigin_com.gsk.jar
Info: Start packing the components of local in packedOrigin_local.jar
Info: Create /usr/sap/IPD/JC02/SDM/program/pack/packedOrigin_local.jar
Info: Create /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
Warning: Warning during command execution: No metadata files exist for
development
component 'revtrac_agu11'/'local'/'LOKAL'/'0.2009.08.11.10.56.14'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'revtrac_aug13eartest'/'local'/'LOKAL'/'0.2009.08.13.14.44.25'/'0'. Cannot pack this archive.
No metadata files exist for development
component 'Aug10_09'/'local'/'LOKAL'/'0.2009.08.10.14.39.29'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'Aug14'/'local'/'LOKAL'/'0.2009.08.14.10.46.38'/'0'. Cannot
pack this archive.
No metadata files exist for development
component 'Aug14two'/'local'/'LOKAL'/'0.2009.08.14.10.55.21'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'revtrac_aug11b'/'local'/'LOKAL'/'0.2009.08.13.14.36.43'/'0'.
Cannot pack this archive.
Missing archives may lead to errors after the packed SDM installation
has been extracted later.
Info: This SDM installation has been packed
to /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
To unpack this installation again,
extract /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR and invoke the
SDM command install with parameter extractpackedinst=true
Executed, but finished with warning(s). Return code: 2
Error: Executed, but finished with warning(s). Return code: 2
ERROR 2010-10-21 15:54:48
MUT-02041 SDM call of createsdmkitjar ends with returncode 2
=============
Can you please check this and help me on this to proceed further.
thanks..
Srinivas -
Getting error code 150:30 after transferring data from iMac to iMac
Hey there,
I have just gotten a new iMac and have migrated my data from my old one to my new one. When I open After Effects CS4, I get error code 150:30, a licensing problem. I'm sure it has something to do with duplicate copies of the program. How can I fix this?The flaw is here:
have migrated my data
Reinstall the software properly.
Download CS4 products
Mylenium -
Error code "-1" while updating the iOS from IPAD2
When I try to update my IPAD2 to iOS 4.3.2 I receive the error code "-1" at the end of the installation, and now I´m stuck in the restore point, because the system don´t boot anymore. When I connect to Itunes it says I have to download the update, then the error appear again, and this is going over and over... Any hints here?
i dont 'now whay people of apple company not concern about this probleme .
i am facing the the same that you have . no one answer . please good felwo help us -
Copy data from 4 internal tables
Hi Experts,
I need to split a database field into 2 separate fields on the frontend and display it in an alv report.
For this i used 4 internal tables. first one for regular fields and rest 3 of them for the split fields.
Now the problem is, if i use 1 loop and insert workarea in it, the second record overwrites the first and if i use 3 internal tables, the looping is improper and it gives me duplicate entries in the report.
delete adjacent duplicate is also not working.
i am pasting the code. kindly help.
thx
*& Report YVENDRALVRPTFINAL
REPORT YVENDRALVRPTFINAL.
TYPE-POOLS: SLIS.
DATA: program LIKE sy-repid.
DATA: fcat TYPE slis_fieldcat_alv.
DATA: fieldcat TYPE TABLE OF slis_fieldcat_alv.
DATA: layout TYPE slis_layout_alv.
Tables: LFA1,
LFB1,
T002T.
DATA: Begin of itab1 occurs 0,
LIFNR LIKE LFA1-LIFNR,
BUKRS LIKE LFB1-BUKRS,
KTOKK LIKE LFA1-KTOKK,
ANRED LIKE LFA1-ANRED,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
STRAS LIKE LFA1-STRAS, " HOUSE and STREET NUMBER
STRAS1 LIKE LFA1-STRAS," STREET NUMBER
PSTLZ LIKE LFA1-PSTLZ,
ORT01 LIKE LFA1-ORT01,
REGIO LIKE LFA1-REGIO,
LAND1 LIKE LFA1-LAND1,
SPTXT LIKE T002T-SPTXT,
TELF1 LIKE LFA1-TELF1,
TELF2 LIKE LFA1-TELF2,
TELFX LIKE LFA1-TELFX,
TELTX LIKE LFA1-TELTX,
SMTP_SRCH LIKE ADR6-SMTP_SRCH,
STCEG LIKE LFA1-STCEG,
BRSCH LIKE LFA1-BRSCH,
END OF itab1.
DATA: wrkarea1 LIKE LINE OF itab1.
DATA: Begin of itab2 occurs 0,
LIFNR LIKE LFA1-LIFNR,
BUKRS LIKE LFB1-BUKRS,
KTOKK LIKE LFA1-KTOKK,
ANRED LIKE LFA1-ANRED,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
STRAS LIKE LFA1-STRAS, " HOUSE and STREET NUMBER
STRAS1 LIKE LFA1-STRAS," STREET NUMBER
STR LIKE LFA1-STRAS,
HOU LIKE LFA1-STRAS,
PSTLZ LIKE LFA1-PSTLZ,
ORT01 LIKE LFA1-ORT01,
REGIO LIKE LFA1-REGIO,
LAND1 LIKE LFA1-LAND1,
SPTXT LIKE T002T-SPTXT,
*TELF1 LIKE LFA1-TELF1,
PHONE LIKE LFA1-TELF1,
PHONE_EXT LIKE LFA1-TELF1,
*TELFX LIKE LFA1-TELFX,
FAX LIKE LFA1-TELFX,
FAX_EXT LIKE LFA1-TELFX,
* TELTX LIKE LFA1-TELTX,
SMTP_SRCH LIKE ADR6-SMTP_SRCH,
STCEG LIKE LFA1-STCEG,
BRSCH LIKE LFA1-BRSCH,
END OF itab2.
DATA: wrkarea2 LIKE LINE OF itab2.
DATA: STREET1 TYPE STRING,
HOUSE1 TYPE STRING,
PHONE1 TYPE STRING,
PHONE_EXT1 TYPE STRING,
FAX1 TYPE STRING,
FAX_EXT1 TYPE STRING.
DATA: BEGIN OF ADRDTL,
HOU TYPE LFA1-STRAS,
STR TYPE LFA1-STRAS,
PHONE TYPE LFA1-TELF1,
*PHONE_EXT TYPE LFA1-TELF1,
*FAX TYPE LFA1-TELFX,
*FAX_EXT TYPE LFA1-TELFX,
*END OF ADRDTL.
DATA: BEGIN OF itabhs occurs 0,
HSESTREET LIKE LFA1-STRAS,
END OF itabhs.
DATA: wahs LIKE LINE OF itabhs.
DATA: BEGIN OF itabph occurs 0,
PHONENPHEXT TYPE LFA1-TELF1,
END OF itabph.
DATA: waph LIKE LINE OF itabhs.
DATA: BEGIN OF itabfx occurs 0,
FAXNFAXEXT TYPE LFA1-TELFX,
END OF itabfx.
DATA: wafx LIKE LINE OF itabhs.
DATA: THREE LIKE LINE OF itab2,
FOUR LIKE LINE OF itab2.
DATA: THREE TYPE LFA1-STRAS,
FOUR TYPE LFA1-STRAS.
SELECT-OPTIONS vendor FOR LFA1-LIFNR.
*parameter vendor type LFA1-LIFNR.
DATA: wa LIKE LFA1-STRAS,
wa1 LIKE LFA1-STRAS,
wa2 LIKE LFA1-STRAS.
DATA: BEGIN OF itabhsnew occurs 0,
STR LIKE LFA1-STRAS,
HOU LIKE LFA1-STRAS,
END OF itabhsnew.
DATA: wahsnew LIKE LINE OF itabhsnew.
DATA: BEGIN OF itabphnew occurs 0,
PHONE LIKE LFA1-TELF1,
PHONE_EXT LIKE LFA1-TELF1,
END OF itabphnew.
DATA: waphnew LIKE LINE OF itabphnew.
DATA: BEGIN OF itabfxnew occurs 0,
FAX LIKE LFA1-TELFX,
FAX_EXT LIKE LFA1-TELFX,
END OF itabfxnew.
DATA: wafxnew LIKE LINE OF itabfxnew.
START-OF-SELECTION.
SELECT LFA1STRAS FROM LFA1 INTO TABLE itabhs where LFA1LIFNR IN vendor.
LOOP at itabhs into wahs.
SPLIT wahs AT SPACE INTO STREET1 HOUSE1 .
MOVE STREET1 TO wahsnew-STR.
MOVE HOUSE1 TO wahsnew-HOU.
INSERT wahsnew INTO TABLE itabhsnew.
ENDLOOP.
SELECT LFA1TELF1 FROM LFA1 INTO TABLE itabph where LFA1LIFNR IN vendor.
LOOP at itabph into waph.
SPLIT waph AT '-' INTO PHONE1 PHONE_EXT1.
MOVE PHONE1 TO waphnew-PHONE.
MOVE PHONE_EXT1 TO waphnew-PHONE_EXT.
INSERT waphnew INTO TABLE itabphnew.
ENDLOOP.
SELECT LFA1TELFX FROM LFA1 INTO TABLE itabfx where LFA1LIFNR IN vendor.
LOOP at itabfx into wafx.
SPLIT wafx AT '-' INTO FAX1 FAX_EXT1.
MOVE FAX1 TO wafxnew-FAX.
MOVE FAX_EXT1 TO wafxnew-FAX_EXT.
INSERT wafxnew INTO TABLE itabfxnew.
ENDLOOP.
*MOVE STREET1 TO ADRDTL-STR.
*MOVE HOUSE1 TO ADRDTL-HOU.
*MOVE PHONE1 TO ADRDTL-PHONE.
*MOVE PHONE_EXT1 TO ADRDTL-PHONE_EXT.
*MOVE FAX1 TO ADRDTL-FAX.
*MOVE FAX_EXT1 TO ADRDTL-FAX_EXT.
SELECT LFA1LIFNR LFB1BUKRS LFA1KTOKK LFA1ANRED LFA1~NAME1
LFA1SORTL LFA1PSTLZ LFA1ORT01 LFA1REGIO
LFA1~LAND1
T002T~SPTXT
LFA1TELF1 LFA1TELF2 LFA1TELFX LFA1TELTX
ADR6~SMTP_SRCH
LFA1STCEG LFA1BRSCH
FROM LFA1
INNER JOIN T002T ON LFA1SPRAS = T002TSPRSL AND T002T~SPRAS = 2
INNER JOIN LFB1 ON LFA1LIFNR = LFB1LIFNR
INNER JOIN ADR6 ON LFA1ADRNR = ADR6ADDRNUMBER
INTO TABLE itab1 WHERE LFB1~LIFNR IN vendor.
LOOP AT itab1 INTO wrkarea1.
MOVE-CORRESPONDING wrkarea1 TO wrkarea2.
*MOVE STREET1 TO wrkarea2-STR.
*MOVE HOUSE1 TO wrkarea2-HOU.
*MOVE PHONE1 TO wrkarea2-PHONE.
*MOVE PHONE_EXT1 TO wrkarea2-PHONE_EXT.
*MOVE FAX1 TO wrkarea2-FAX.
*MOVE FAX_EXT1 TO wrkarea2-FAX_EXT.
*MOVE ADRDTL-STR TO wrkarea2-STR.
*MOVE ADRDTL-HOU TO wrkarea2-HOU.
*MOVE ADRDTL-PHONE TO wrkarea2-PHONE.
*MOVE ADRDTL-PHONE_EXT TO wrkarea2-PHONE_EXT.
*MOVE ADRDTL-FAX TO wrkarea2-FAX.
*MOVE ADRDTL-FAX_EXT TO wrkarea2-FAX_EXT.
*MOVE-CORRESPONDING wahs TO wrkarea2.
*MOVE-CORRESPONDING waph TO wrkarea2.
*MOVE-CORRESPONDING wafx TO wrkarea2.
*MOVE-CORRESPONDING wahsnew TO wrkarea2.
*MOVE-CORRESPONDING waphnew TO wrkarea2.
*MOVE-CORRESPONDING wafxnew TO wrkarea2.
*MOVE itabhsnew TO itab2.
INSERT wrkarea2 INTO TABLE itab2.
ENDLOOP.
LOOP AT itabhsnew INTO wahsnew.
MOVE-CORRESPONDING wahsnew TO wrkarea2.
INSERT wrkarea2 INTO TABLE itab2.
ENDLOOP.
LOOP AT itabphnew into waphnew.
MOVE-CORRESPONDING waphnew TO wrkarea2.
INSERT wrkarea2 INTO TABLE itab2.
ENDLOOP.
LOOP AT itabfxnew into wafxnew.
MOVE-CORRESPONDING wafxnew TO wrkarea2.
INSERT wrkarea2 INTO TABLE itab2.
ENDLOOP.
*loop at itabhsnew.
*itab2-HOU = itabhsnew-HOU.
*itab2-str = itabhsnew-str.
*append itab2.
*endloop.
*LOOP AT itabhsnew.
*itab2-HOU = itabhsnew-HOU.
*itab2-str = itabhsnew-str.
*append itab2.
*ENDLOOP.
*delete adjacent duplicates FROM itab2 COMPARING HOU STR PHONE PHONE_EXT FAX FAX_EXT.
*LOOP AT itab2.
*INSERT wrkarea2 INTO TABLE itab2.
*endloop.
*WRITE: THREE.
*new-line.
*WRITE: four.
*new-line.
*WRITE: five.
program = SY-REPID.
*PERFORM SELECT.
*loop at itab2.
*write:/ itab2-LIFNR,
itab2-BUKRS,
itab2-KTOKK,
itab2-ANRED,
itab2-NAME1,
itab2-SORTL,
itab2-HOU,
itab2-STR,
itab2-PSTLZ,
itab2-ORT01,
itab2-REGIO,
itab2-LAND1,
itab2-SPTXT,
itab2-TELF1,
*itab2-PHONE,
*itab2-PHONE_EXT,
itab2-TELF2,
itab2-TELFX,
*itab2-FAX,
*itab2-FAX_EXT,
itab2-TELTX,
itab2-SMTP_SRCH,
itab2-STCEG,
itab2-BRSCH.
*endloop.
PERFORM CATALOG.
PERFORM LAYOUTMAIN.
PERFORM DISPLAY.
LFA1STRAS LFA1STRAS
*FORM SELECT.
SELECT LFA1LIFNR LFB1BUKRS LFA1KTOKK LFA1ANRED LFA1~NAME1
*LFA1SORTL LFA1PSTLZ LFA1ORT01 LFA1REGIO
*LFA1LAND1 T002TSPTXT LFA1TELF1 LFA1TELF2 LFA1TELFX LFA1TELTX
*ADR6SMTP_SRCH LFA1STCEG LFA1~BRSCH
*FROM LFA1
*INNER JOIN T002T ON LFA1SPRAS = T002TSPRSL AND T002T~SPRAS = 2
*INNER JOIN LFB1 ON LFA1LIFNR = LFB1LIFNR
INNER JOIN ADR6 ON LFA1ADRNR = ADR6ADDRNUMBER
*INTO TABLE itab1 WHERE LFA1~LIFNR IN vendor.
*LOOP AT itab2.
*MOVE itab1 TO itab2.
*APPEND itab2.
*MOVE-CORRESPONDING ADRDTL TO itab2.
*APPEND itab2.
*MOVE-CORRESPONDING ADRDTL TO itab2.
*APPEND itab2.
*ENDLOOP.
*LOOP AT itab1 INTO wrkarea1.
*MOVE-CORRESPONDING wrkarea1 TO wrkarea2.
*ENDLOOP.
*MOVE-CORRESPONDING adrdtl TO wrkarea2.
*LOOP AT itab2.
*INSERT wrkarea2 INTO TABLE itab2.
*ENDLOOP.
*ENDFORM.
FORM CATALOG.
fcat-tabname = 'LFA1'.
fcat-fieldname ='LIFNR'.
fcat-seltext_m = 'Vendor Number'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFB1'.
fcat-fieldname ='BUKRS'.
fcat-seltext_m = 'Company Code'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='KTOKK'.
fcat-seltext_m = 'Account Group'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='ANRED'.
fcat-seltext_m = 'Title'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='NAME1'.
fcat-seltext_m = 'Name'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='SORTL'.
fcat-seltext_m = 'Search Term'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='HOU'.
fcat-seltext_m = 'Street'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='STR'.
fcat-seltext_m = 'House Number'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='PSTLZ'.
fcat-seltext_m = 'Postal Code'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='ORT01'.
fcat-seltext_m = 'City'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='REGIO'.
fcat-seltext_m = 'Region or State'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='LAND1'.
fcat-seltext_m = 'Country'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='SPTXT'.
fcat-seltext_m = 'Language'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='PHONE'.
fcat-seltext_m = 'Telephone'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='PHONE_EXT'.
fcat-seltext_m = 'Extension'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='FAX'.
fcat-seltext_m = 'Fax Number'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='FAX_EXT'.
fcat-seltext_m = 'Extension'.
APPEND fcat TO fieldcat.
fcat-tabname = 'ADR6'.
fcat-fieldname ='SMTP_SRCH'.
fcat-seltext_m = 'E-Mail'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='STCEG'.
fcat-seltext_m = 'VAT Registration Number'.
APPEND fcat TO fieldcat.
fcat-tabname = 'LFA1'.
fcat-fieldname ='BRSCH'.
fcat-seltext_m = 'Industry Type'.
APPEND fcat TO fieldcat.
ENDFORM.
FORM LAYOUTMAIN.
layout-zebra = 'X'.
*layout-edit= 'X'.
*layout-zebra = 'X'.
*layout-zebra = 'X'.
ENDFORM.
FORM DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'program'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'VENDOR DETAILS'
I_GRID_SETTINGS =
IS_LAYOUT = layout
IT_FIELDCAT = fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = itab2.
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.HI,
" By taking two internal table
LOOP AT ITAB.
IT_FINAL-FIELD1 = ITAB-FIELD(10).
IT_FINAL-FIELD2 = ITAB-FIELD+10(10).
APPEND IT_FINAL.
CLEAR IT_FINAL.
ENDLOOP.
" By taking one internal table
LOOP AT ITAB.
ITAB-FIELD2 = ITAB-FIELD1(10).
ITAB-FIELD3 = ITAB-FIELD1+10(10).
MODIFY ITAB INDEX SY_TABIX.
ENDLOOP. -
How to copy data from one internal table to another
i am using some function module to get some data for my function module
and the retrieved data is not getting populated in mu fumctional module
i am sucessful in getting the data to an internal table in my function module but dont know how to pass it to my table parameter
thanks in advanceHi Naval,
Declare an internal table of type table parameter structure and pass it the table parameters of the Function module.
Check the code for this function module.
DATA IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
SELECT * FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\TEST.TXT'. FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
<b> TABLES
DATA_TAB = IT_MARA</b>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Vinay -
I have two server TestSource and TestDestination . In both the tables I have common table like below. I would like to copy the data from TestSource server src_Table to TestDestination server table dest_table
excluding the column timestamp. This process I would like to achieve dynamically. Since I have 50 tables where I need to copy from source server to destination server.
Rule : This needs to achieve using script task. Please help me to find the solution as it is very urgent requirement.
Above rule is because No option to choose export wizard dynamic query option for linked server.
--Source
Table
CREATE TABLE src_table
a int,
b int,
c timestamp
--Dest Table
CREATE TABLE dest_table
a int,
b int,
c timestamp
Thank you in advance.
HariI have two server TestSource and TestDestination . In both the tables I have common table like below. I would like to copy the data from TestSource server src_Table to TestDestination server table dest_table
excluding the column timestamp. This process I would like to achieve dynamically. Since I have 50 tables where I need to copy from source server to destination server.
Rule : This needs to achieve using script task. Please help me to find the solution as it is very urgent requirement.
Above rule is because No option to choose export wizard dynamic query option for linked server.
--Source
Table
CREATE TABLE src_table
a int,
b int,
c timestamp
--Dest Table
CREATE TABLE dest_table
a int,
b int,
c timestamp
Thank you in advance.
Hari -
An error has occured while downloading Mountain lion from app store
Since apple denied my purchsed proof, I don't really know what is going on? Maybe I claimed the copy late, I am ok with it then I puchased from App Store, but download failed? I keep trying on whatever solution here but not working at all, can anyone help?
Contact with iTunes support > http://www.apple.com/support/mac/app-store/contact
Message was edited by: mende1 -
Don't know why an error occured, but it has? any one know how I can can my purchase money redeemed,
so that I may download again...thanksHello there, Aruna Patel.
The following Knowledge Base article should provide the information you need to help resolve your issue:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
What is -2000F error code mean while doing Internet Recovery?
My new macbookpro (1 hour old) crashed while trying to setup dual boot and now only works with internet recovery.
But no matter how many times i restart and connect via wifi it always shows www.apple.com/support follow by -2000F in second line.
What does this mean? Bad internet connection? None compatiable WIFI router? (Linksys E4200).
ThanksMike Yang wrote:
My new macbookpro (1 hour old)
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/your problems. A message board is the LAST place you should be. -
Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.
I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.You're very welcome.
-
Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller
Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Copy data from one Table to another Table
How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
Thanks...Question 1:
I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
Question 2:
You have two options, but you may not have privileges for both.
Option 1:
DELETE FROM tableowner.tablename; COMMIT;
Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
Option 2:
TRUNCATE TABLE tableowner.tablename;
Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL.
Maybe you are looking for
-
Full outer Join:ORA-01790
Hi All, The issue may be silly, but we cant make it out: DB : Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - ProdWe are running the below query with no issues: select t1.text,t2.text text2,t1.line,decode(upper(t1.text),upper(t2.text)
-
I recently purchased a airport time capsule. My current router offer duel band. Does the Airport offer duel band
-
Per user bandwidth rate limit.
How to configure per user bandwidth rate limit for wireless guest client, authentication server is ISE 1.2 & wireless controller is 5760.
-
Can I sort iTouch apps by Genre like in iTunes?
In iTunes I have the option to sort my apps by Genre. I know I can (with the new OS upgrade)create folders, but I'm wondering if I can spare myself the work and just sort the apps by these Genres on my touch? I started making folders and found limits
-
HTML Error-Required attribute "type" not specified.
I am running into an issue with this error and I have tried to fix it multiple times, however I cannot seem to get it. The code for my page is below, and I would really appreciate any help that I can get. Thanks and GOD BLESS y'all... The error is p