Error code paper mismatch for photosmart D7560
trying to print checks but error code indicates paper mismatch, does not match paper size or type...just spits out my blank check
I had this problem for so long and finally figured it out. HP was no help except for the suggestion to switch it to "draft" quality.
Depending on your operating system, it will be different... but basically... get to your printer's preferences ... Click on the "Paper / Quality" tab... and make sure that "Paper Type" (XP) or "Output Quality" (Windows 7) is set to AUTOMATIC. That's it. In Windows 7 ... there are a little more steps ... For Windows 7 you might have to go to printing preferences, change media type to plain, click on advanced, and change "Output Quality" to AUTOMATIC. OH YEA... AND MAKE SURE TO CLICK "APPLY" AND NOT JUST "OK". It works like a charm. In Windows 7 The "Quality Settings" will automatically check the "Custom" checkbox when you put it on AUTOMATIC. That's good... that's the way you want it.. So, the Quality Settings "Custom" checkbox will be checked and you will see that "Normal" is still selected but it is grayed out. Hope this helps somebody. I was going to go on HP's site and tell them the same thing since they haven't figured it out yet, but I don't want to make a new account... I have too many accounts already. If someone has an HP customer blog account... feel free to copy and paste this in there if you want. Good Luck People .
Similar Messages
-
SMTP Error Code : 530 . For more information, see your SMTP server manual.
Hello,
I am Getting
"SMTP Error Code : <530>. For more information, see your SMTP server manual" error, While configuring SMTP in Data Services 4.0 system. I have tried executing the SMTP_TO function on another DS machine which has 3.2 verion installed, but getting the same error.
FYI,
1) Able to telnet the Exchange server through Data service machine
2) Maintained SMTP settings in Data services server manager
3) using the same SMTP server host name in other SAP systems (ECC,BI,PI) etc and able to send mails.
Regards
PuneetThanks for the reply Julian.
There was a problem in SMTP relay rights on Exchange server. Able to send mails now. Thanks!
Getting another problem wherein I am not able to send mails to multiple recipients i.e. If I specify 5 recipients in SMTP_TO function and execute the job then Every individual is getting E-Mail having there own ID in TO field, other Id's are not gettting displayed in TO field.
I hve checked note "1276348 - smtp_to function - multiple recipients not displayed"
Settings mentioned in the note have been done and job is getting executed without any error but the mails are not getting delivered.
It would be great if anyone can suggest on how to proceed here.
Thanks & Regards
Puneet -
Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden
Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework TeamHi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP -
'The termination occurred in system E03 with error code 403 and for the rea
hello gurus,
i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
Service cannot be reached.
'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
for this we need to activate some service at sicf transaction level.
could anybody suggest me which service i need to activate to overcome my problem.
best regards,
raja.If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
First check above one.
this is for understanding
http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
Regards
Srinivas -
Oracle Error Code and Message for Query Timeout
Hi,
I need to catch the oracle error code and message for query timeout.
I am using Oracle 9i and could not find any relevant error code/message
for query timeout in Oracle Error Messages.
If anyone has encountered such error messages, please let me know the
Oracle Code or Error message.
Thanks & Regards,
KanjanaFly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
HTH -- Mark D Powell -- -
Error code 403 on 5520 photosmart
Using a Mac computer and been scanning direct to email working fine and then suddenly getting a 403 error code - any advice on how to solve problem please . I can scan to the computer.
Hi @VV-11,
Welcome to the HP Support Forums. I gather that you are getting a connection error message when trying to use the scan to email feature of your Photosmart 5520 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps, with screen shots, on how to do this. Please don’t worry that the screen shots are for a Photosmart 7510 printer, the steps are the same.
If after setting a manual IP address and DNS servers you are getting the same error, Please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
When eprinting from an iphone or ipad, i get an error message "paper mismatch"
HP Officejet 6500A Plus has wireless capability and ePrinting. When printing a photo from the HP ePrint App on an iPhone or iPad, results in an error message about "paper mismatch". The 1st print attempt had letter paper in the tray. The picture was full 8 1/2 x 11 print.
When paper in tray was changed to 4 x 6, the above error occured. I could not find a way to change paper setting from the iPhone or iPad.Ok, the ePrint app is entirely unnecessary. Go to the photo library on the iPhone and then click the action button (looks like a box with a curved arrow pointing to the right). Then select print, make sure your printer shows up and select print again. The ePrint app is for printing in public locations, not to your specific printer.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
HP mini 110-1116NR laptop fatal error code CNU939DV7 askin for password
Upon startup it asks for current password. When you enter it 3 times wrong it says fatal error code CNU939DV7. Ive tried every password on the help site but none were for the same fatal error code. Please Help!
This question was solved.
View Solution.Hi,
Try the below code
e9lofo1t6x (3rd letter is L)
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
Need drivers for Photosmart D7560, and Scanjet 4370 for both Windows 7 32 bit and 64 bit
I need drivers for my Photosmart D7560 Printer and Scanjet 4370 scanner, for both Windows 7 32 bit, and 64 bit.
Hi, For the printer: http://ftp.hp.com/pub/softlib/software11/COL30216/mp-75048-1/PS_SF_04_D7500_NonNet_Full_Win_WW_130_140.exe For the scaner (no available): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=457534&swLangOid=8&swEnvOid=4063 Regards.
-
Error: code too large for try statement, when compiling a big java file.
Hi,
I have a big java file ( around 16000 lines). When compiling it, I got following error message:
MyMain.java:15233: code too large for try statement
} catch ( Throwable t ) {
In MyMain.java, I just repeat following statements about 1000 times.
try {
if ( year >= 2002 ) {
System.out.println( "year: Evaluation version is not valid" );
} else {
System.out.println( "year: Evaluation version is still valid" );
} catch ( Throwable t ) {
if ( year >= 2002 ) {
System.out.println( "year: Evaluation version is not valid" );
} else {
System.out.println( "year: Evaluation version is still valid" );
I tried 1.3 and 1.4 javac compiler, there was some error.
How to make compiler to compile this code?
Thanks,Hi,
I have a big java file ( around 16000 lines). When
compiling it, I got following error message:
MyMain.java:15233: code too large for try statement
} catch ( Throwable t ) {
I tried 1.3 and 1.4 javac compiler, there was some
error.
How to make compiler to compile this code?
You don't. Each method has an absolute limit on the number of byte codes. You have reached that limit. The limit is part of the specification and JVMs will refuse to run classes that exceed the limit. So even if you could compile it, it wouldn't run.
It is quite common for code generators to generate large monolithic blocks of code. Presumably this is how you got to this spot. Modify the code generator to break it into smaller blocks.
If you did it manually then you did it wrong. And you will have to manually break it into smaller blocks. (And re-examine your design since it is probably wrong.) -
Health Check Error: Dependency$ p_timestamp mismatch for VALID objects
Just before the upgrade when we ran the health check we got the following 8 errors and want to fix them.
Dependency$ p_timestamp mismatch for VALID objects
[E] - P_OBJ#=5015556 D_OBJ#=5015647
[E] - P_OBJ#=5015556 D_OBJ#=8432965
[E] - P_OBJ#=5015576 D_OBJ#=5015647
[E] - P_OBJ#=5015576 D_OBJ#=8432965
[E] - P_OBJ#=5015588 D_OBJ#=5015647
[E] - P_OBJ#=5015588 D_OBJ#=8432965
[E] - P_OBJ#=5015589 D_OBJ#=5015647
[E] - P_OBJ#=5015589 D_OBJ#=8432965
SELECT o.obj# d_obj, do.name d_name, do.type# d_type, po.obj# p_obj, po.name p_name, to_char(p_timestamp,'DD-MON-YYYY HH24:MI:SS') "P_Timestamp",
to_char(po.stime ,'DD-MON-YYYY HH24:MI:SS') "STIME", decode(sign(po.stime-p_timestamp),0,'SAME','*DIFFER*') X FROM sys.obj$ do, sys.dependency$ d, sys.obj$ po WHERE
P_OBJ#=po.obj#(+) AND D_OBJ#=do.obj# AND do.status=1 /*dependent is valid*/ AND po.status=1 /*parent is valid*/ AND po.stime!=p_timestamp /*parent timestamp not match*/ ORDER BY 2,1;
8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015576KUPC$_API_ACK09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015589KUPC$_MASTERJOBINFO 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015556KUPC$_LOGENTRIES 09-DEC-2009 14:01:27 29-NOV-2010 12:04:13*DIFFER*
8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015588KUPC$_MASTERERROR 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
5015647 KUPC$DATAPUMP_QUETAB 2 5015576KUPC$_API_ACK 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
5015647 KUPC$DATAPUMP_QUETAB 2 5015589KUPC$_MASTERJOBINFO 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
5015647 KUPC$DATAPUMP_QUETAB 2 5015556KUPC$_LOGENTRIES 09-DEC-2009 14:01:27 29-NOV-2010 12:04:13*DIFFER*
5015647 KUPC$DATAPUMP_QUETAB 2 5015588KUPC$_MASTERERROR 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
Solution as per the 579256.1's is
The returning objects will have to be recompiled or recreated to clear the problem.
Please see Note 781959.1 to recompile them. This can cause problems during upgrade and PLSQL validation.
But in my case above objects are not synonyms and are of type=2.
So, not sure how to fix them. pl. let us know how we can fix these errors.Well, I can tell you that this kind of error is not OS related, but rather a HW thing. It happens where there is a general detection of something going wrong. Sometimes it can happen randomly and might not be an indication of a problem. But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors.
Unfortunately I don't really know what to do about such things except give you machine a proper inspection. But if things are working fine, and continue to do so, I wouldn't worry about it. If it becomes a regular occurance, then I'd worry. -
Compilation Error Code too large for Try block
I am getting error while jsp compilation.
code too large for try statement.
Can anybody help me in this. I am using WL 8.1.4
Thanks in Advance
HimanshuThis article pretty much sums it up: http://www.experts-exchange.com/Web/Web_Languages/JSP/Q_20711819.html
Your JSP_.java file will not compile to a .class file since the JSP is too large and the newer java compiler is more strict. You have to most likely break your JSP up using includes or use a more efficient design. -
Error code 170 (ERROR_BUSY) for DeviceIOControl - Target is SAS HBA
Hi,
This is about ERROR_BUSY response (Code 170) received for DeviceIOControl call.
Our development platform is Windows 7 and target device is SAS HBA 12G and 2 SSD devices connected.
First SSD device is directly connected to one HBA port. Second SSD is connected to other port of same HBA
through power control board so that we can switch off and on the power to the SSD.
I am sending commands to the first SSD device. Commands are sent and response is received to the application.
But when i switch off power to second SSD, Command sent to first SSD is interrupted and received the error code
as 170 (ERROR_BUSY) from DeviceIOControl function.
We have developed our own minport driver for SAS HBA. We analyzed the driver logs and identified whatever commands
received through BuildIO and StartIO, ISR (response) is received.
During Power off/on cycle, Report LUNS (0xA0) and Inquiry (0x12) commands are received from Windows storport driver.
Is it something like when there is a change detected (Add/Remove device) in the Bus, Storport driver does enumeration and if any commands are received during this enumeration, it will return the status for the command as ERROR BUSY).
Please clarify this.
Thanks & Regards,
RaphelHi Raphel,
Storport enumeration process is an internal process that won't affect other requests. e.g. after device enumeration and some pnp requests in OS, you should see the device is started from device manager. In this state, the device stack serves incoming request.
During the device re-enumeration process, Storport won't fail IO with busy status. It may hold IOs and send them to miniport/device once re-enumeration completes.
Is there any filter driver on the storage stack? You may want to enable ETW trace for Storport to understand the status returned from this layer.
Thanks,
Michael Xing [MSFT] -
RemoteUpdateManager Error code: UpdaterCore failed for DownloadUpdates errorCode(207) curRefId(Adobe
Any help with thies error codes?
Marker - Nov 8, 2012 10:50:10 AM
11/08/12 10:50:13:700 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | |
11/08/12 10:50:13:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
11/08/12 10:50:13:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
11/08/12 10:50:13:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Launching the RemoteUpdateManager...
11/08/12 10:50:13:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | RemoteUpdateManager version is : 3.1.105.0 (BuildVersion: 3.1; BuildDate: Tue Sep 04 2012 13:58:18 )
11/08/12 10:50:13:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
11/08/12 10:50:13:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Initializing UpdaterCore Library...
11/08/12 10:50:13:762 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | UpdaterCore library initialized successfully.
11/08/12 10:50:13:762 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
11/08/12 10:50:13:763 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore CheckForUpdate...
11/08/12 10:50:14:136 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | CheckForUpdates completed successfully.
11/08/12 10:50:14:136 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
11/08/12 10:50:14:136 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore DownloadUpdates...
11/08/12 10:50:14:141 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | Update (AdobeDigitalPublishingCS6-2.0/2.04.2.535) is not supported by RemoteUpdateManager. Skipping processing of this update.
11/08/12 10:50:14:141 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Following Updates are to be downloaded :
11/08/12 10:50:14:141 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (AdobeExtensionManagerCS6-6.0/6.0.4)
11/08/12 10:50:14:141 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | |
11/08/12 10:50:14:141 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Downloading (AdobeExtensionManagerCS6-6.0/6.0.4) ...
11/08/12 10:50:15:153 | [ERROR] | | AAMEE | Utilities | RemoteUpdateManager | | | UpdaterCore failed for DownloadUpdates errorCode(207) curRefId(AdobeExtensionManagerCS6-6.0/6.0.4) errorCodeString(U43M1D207)
11/08/12 10:50:15:153 | [ERROR] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Failed to download (AdobeExtensionManagerCS6-6.0/6.0.4) ...
11/08/12 10:50:15:153 | [ERROR] | | AAMEE | Utilities | RemoteUpdateManager | | | Some Updates failed to download ...
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore InstallUpdates...
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | No new Updates to be installed ...
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Following Updates failed to Download :
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (AdobeExtensionManagerCS6-6.0/6.0.4)
11/08/12 10:50:15:154 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
11/08/12 10:50:15:224 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
11/08/12 10:50:15:225 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Ending the RemoteUpdateManager Return Code (2)
11/08/12 10:50:15:225 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
11/08/12 10:50:15:225 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
11/08/12 10:50:15:225 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | |I removed my overrides file and ran RemoteUpdateManager and it did work:
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | |
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Launching the RemoteUpdateManager...
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | RemoteUpdateManager version is : 3.1.105.0 (BuildVersion: 3.1; BuildDate: Tue Sep 04 2012 13:58:18 )
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
12/18/12 10:23:11:017 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Initializing UpdaterCore Library...
12/18/12 10:23:11:107 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | UpdaterCore library initialized successfully.
12/18/12 10:23:11:108 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
12/18/12 10:23:11:108 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore CheckForUpdate...
12/18/12 10:23:12:145 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | CheckForUpdates completed successfully.
12/18/12 10:23:12:145 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
12/18/12 10:23:12:145 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore DownloadUpdates...
12/18/12 10:23:12:166 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | Update (AdobeDigitalPublishingCS6-2.0/2.05.1.550) is not supported by RemoteUpdateManager. Skipping processing of this update.
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Following Updates are to be downloaded :
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (AdobeExtensionManagerCS6-6.0/6.0.4)
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (AdobeMediaEncoderCS6-6/6.0.2)
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (FlashPro12.0/12.0.2)
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (PhotoshopCameraRaw7-7.0/7.3.37)
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | |
12/18/12 10:23:12:168 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Downloading (AdobeExtensionManagerCS6-6.0/6.0.4) ...
12/18/12 10:23:13:593 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully downloadeded (AdobeExtensionManagerCS6-6.0/6.0.4) ...
12/18/12 10:23:13:593 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Downloading (AdobeMediaEncoderCS6-6/6.0.2) ...
12/18/12 10:23:37:695 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully downloadeded (AdobeMediaEncoderCS6-6/6.0.2) ...
12/18/12 10:23:37:696 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Downloading (FlashPro12.0/12.0.2) ...
12/18/12 10:27:30:115 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully downloadeded (FlashPro12.0/12.0.2) ...
12/18/12 10:27:30:115 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Downloading (PhotoshopCameraRaw7-7.0/7.3.37) ...
12/18/12 10:28:02:341 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully downloadeded (PhotoshopCameraRaw7-7.0/7.3.37) ...
12/18/12 10:28:02:341 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | All Updates downloaded successfully ...
12/18/12 10:28:02:341 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
12/18/12 10:28:02:341 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore InstallUpdates...
12/18/12 10:28:02:341 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Installing (AdobeExtensionManagerCS6-6.0/6.0.4) ...
12/18/12 10:28:13:790 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | InstallUpdates is successfull
12/18/12 10:28:13:791 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully installed (AdobeExtensionManagerCS6-6.0/6.0.4) ...
12/18/12 10:28:13:791 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Installing (AdobeMediaEncoderCS6-6/6.0.2) ...
12/18/12 10:29:04:381 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | InstallUpdates is successfull
12/18/12 10:29:04:381 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully installed (AdobeMediaEncoderCS6-6/6.0.2) ...
12/18/12 10:29:04:381 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Installing (FlashPro12.0/12.0.2) ...
12/18/12 10:31:09:920 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | InstallUpdates is successfull
12/18/12 10:31:09:921 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully installed (FlashPro12.0/12.0.2) ...
12/18/12 10:31:09:921 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Installing (PhotoshopCameraRaw7-7.0/7.3.37) ...
12/18/12 10:31:34:624 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | InstallUpdates is successfull
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | *** Successfully installed (PhotoshopCameraRaw7-7.0/7.3.37) ...
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | All Updates installed successfully ...
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Following Updates were successfully installed :
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (AdobeExtensionManagerCS6-6.0/6.0.4)
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (AdobeMediaEncoderCS6-6/6.0.2)
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (FlashPro12.0/12.0.2)
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | (PhotoshopCameraRaw7-7.0/7.3.37)
12/18/12 10:31:34:625 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
12/18/12 10:31:34:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
12/18/12 10:31:34:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Ending the RemoteUpdateManager Return Code (0)
12/18/12 10:31:34:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
12/18/12 10:31:34:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | ##################################################
12/18/12 10:31:34:701 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | |
This is my overrides file:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Overrides>
<Application appID="webfeed">
<Domain>http://adobeupdates.collemcvoy.com</Domain>
<URL>/AUSST/webfeed/oobe/aam10/mac/</URL>
<Port>80</Port>
</Application>
<Application appID="webfeed20">
<Domain>http://adobeupdates.collemcvoy.com</Domain>
<URL>/AUSST/webfeed/oobe/aam20/mac/</URL>
<Port>80</Port>
</Application>
<Application appID="updates">
<Domain>http://adobeupdates.collemcvoy.com</Domain>
<URL>/AUSST/updates/oobe/aam10/mac/</URL>
<Port>80</Port>
</Application>
<Application appID="updates20">
<Domain>http://adobeupdates.collemcvoy.com</Domain>
<URL>/AUSST/updates/oobe/aam20/mac/</URL>
<Port>80</Port>
</Application>
</Overrides>
So I am thinking the issue is with my overides file or my server. -
Recovery Manger Error Code FFFFFF 19 For Hp Pavilion g6
Recentlly I did a Factory Restore on my Hp Pavilion g6 but once trying to restore the files via the restore applaction on the usb I got the eorror code Recovery Manger Failed. Error Code = FFFFFF 19. I would just like to know what this means and if theres any way to recover the files I have saved on the usb now?
Hi @Adriana94 ,
I moved your topic here where you'll get more response from the forum feedback section!
Best,
Russ
I worked for HP.
Maybe you are looking for
-
Possible Solution to Google Search Bar Not Working/Safari Not Loading Pages
Hello Apple Forums, I have recently encountered a possible solution to a problem with Safari. The one in which Safari fails to load any page associated with www.google.com. Especially the Google Search Bar—a feature I use frequently. After browsing t
-
Screen display looks fuzzy using xf86-video-intel on a HP Pavilion 23
Hello, First off I want to say, thank you for Arch! Been using some distros on and off and I think I found my /home! I made a full plunge into Linux a bit ago after some Windows 8.1 issues, switched to Arch and not looking back. Anyways, So far all m
-
Suddenly, messages are not displaying correctly, how can I cure this?
Messages have stopped displaying correctly, or, in some case, at all. The messages have downloaded OK. Even messages which were displaying correctly earlier, now don't. It occurred after 'finger' problems - I tried to type something into Firefox but
-
Payment program for foreign vendors
Hi Experts, Can some body shed light on this.. Can we run the payment program for foreign vendors in their currency.. if soo what r the settings needed.Pls send in this mail iD ([email protected]) thanks in advance, R.Manigandan
-
FORMS CENTRAL CHAT SUPPORT S*CKS
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 1 second(s) or longer as there are 1 customer(s) in line ahead of you. You are now chatting with 'Saravanan' Saravanan: Hello. Welcom