(Error code: ssl_error_no_cypher_overlap) - any suggestions?

Can't access https://www.cmsid.navy.mil/ - receiving this error, (Error code: ssl_error_no_cypher_overlap) - any suggestions?
Trying to log in - I'm a navy sailor. Used to be able to access it while I was away in school. Since I returned home, no such luck!

but the regular http://www.navy.mil/ shows up fine so the subdomain is down or has been removed.
also the connection isnt trusted that is why you are getting that error message

Similar Messages

  • I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
    Bad File names can even cause it...
    http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

  • Downloaded adobe exchange in CS6, I was prompted to upgrade the Extension Manager from version 6.0.0.412 to 6.0.8 . I keep getting error code: U44M1P7 - any suggestions? tks

    can anyone help me with the error code U44M1P7? thanks

    Please delete the EM CS6 installation folder manually, then download and install the EM 6.0.8 from Adobe - Exchange : Download the Adobe Extension Manager

  • Error code: ssl_error_no_cypher_overlap comes up when I try to veiw the log in screen on tumblr, how to fix this in FireFox 26.0?

    I can browse through tumblr just fine, but whenever I go to the login page it said:
    Secure Connection Failed. An error occurred during a connection to www.tumblr.com. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
    I understand that tumblr has certification errors but that never happened to me before I until I upgraded to Firefox 26.0. I like FF and I don't want to use any other browser.
    How to fix this?

    Does it help if you either disable SSL3 or disable TLS as a test?
    security.tls.version.min = 1 and security.tls.version.max = 1 disables SSL3 and enables TLS 1.0
    security.tls.version.max = 0 and security.tls.version.max = 0 enables SSL3 and disables TLS 1.0
    Type <b>about:config</b> in the location (address) bar and press the <i>Enter</i> key to open the <i>about:config</i> page like you open a website by typing the URL in the location bar.
    *If you see a warning message then you can confirm that you want to access the about:config page.
    *http://kb.mozillazine.org/about:config
    See:
    *http://kb.mozillazine.org/security.tls.version.*
    0 means SSL 3.0, 1 means TLS 1.0, 2 means TLS 1.1, etc.
    You can try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
    If that helped to solve the problem then you can remove the renamed cert8.db.old file.
    Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.
    Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
    If that didn't help then remove or rename secmod.db (secmod.db.old) as well.

  • (Error code: ssl_error_no_cypher_overlap)

    I can no longer access CreditKarma, receive the error message: (Error code: ssl_error_no_cypher_overlap). Used to work fine, but no longer. Don't know much about computers but would like to fix this. Any ideas?

    If you have XP SP2 or SP3 then please update to the current Firefox 24 release.
    You can find the full version of the latest Firefox 24.0 release in all languages and for all Operating Systems here:
    *http://www.mozilla.org/en-US/firefox/all.html
    *http://www.mozilla.org/en-US/firefox/24.0/system-requirements/
    Works here with AES-256.
    *https://www.creditkarma.com/
    Is SSL3 and TLS1 enabled, see:
    * Tools > Options > Advanced : Encryption: Protocols
    Note that this is no longer possible in Firefox 24.
    You can check the <b>ssl</b> and <b>tls</b> prefs on the about:config page.<br />
    If any ssl or tls pref is bold (user set) then right-click that pref and choose "Reset" to reset the pref to the default value.<br />
    Paste this regular expression in the Search bar at the top of the about:config page:
    *<b>/security.*ssl|security.*tls/</b>
    *http://kb.mozillazine.org/about:config

  • After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    additional info.
    I have found the correct error definition in english.
    "can not start the device (Code 10)"
    I have updated my bios to the latest version.
    I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
    I have tried to uninstall and reinstall all webcam drivers - no luck

  • While updating my 3GS to 5.0.1 iTunes stops with an error of -5000, any suggestions?

    While updating my iPhone 3GS to 5.0.1 using iTunes on PC with Windows 7, the application stops with an error of (-5000), any suggestions?

    If you are getting a network timeout error then try temporarily turning off your firewall and antivirus software until the download has completed. If it's a different error then if you say what it is somebody might be able to help.

  • Trying to download itunes keep getting error message 2, any suggestions?

    trying to download itunes keep getting error message 2, any suggestions?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen?  Error code 1416, any help?

    I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen?  Error code 1416, any help?

    When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives.  If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

  • When sharing a videos I get a rendering error: -50.  Any suggestions?

    when sharing a videos I get a rendering error: -50.  Any suggestions?

    I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
    Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
    Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
    Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
    I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
    It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work.

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Can't download Adobe Reader.  Error 1606.  Any suggestions?

    Can't download Adobe Reader.  Error 1606.  Any suggestions?

    What is your operating system?  Is there anything else beside the number 1606?

  • I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

    I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

    Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
    You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
    Cancell both downloads anyway.
    Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed,  Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
    Only update were it say's check for updates, not download now.

  • I am trying to set up iCloud to sync my Outlook Calendar however it keeps failing due to 'an unexpected error' but it doesn't say what the error is! Any suggestions would be gratefully received.

    I am trying to set up iCloud to sync my Outlook Calendar however it keeps failing due to 'an unexpected error' but it doesn't say what the error is! Any suggestions would be gratefully received.

    Create a iTune and App Store account without credit card
    1. Go to App Store and select a free app
    2. Tap INSTALL APP
    3. Create New Apple ID
    4. Confirm Your Country
    5. Agree with Terms and Conditions
    6. Fill in your Apple ID and Password (must be a valid email address)
    7. Create and answer your secret question e.g. What is the name of my dog?
    8. Select NONE for Payment Method
    9. Fill in Billing Address i.e. your address
    10. Submit application for new Apple ID
    11. Wait for verification email
    12. When email arrive, verify your account
    13. Start downloading your free apps

  • I have an eMac and am trying to copy/move movie files from eMac to external hard drive for backup. The eMac will not allow me to do this. Keeps reading error -61. Any suggestions are greatly appreciate. Thanks!

    Trying to backup movie files from eMac to external hard drive. Keep getting error -61. Any suggestions? Thanks

    Good advice from Keith.
      wrPermErr                
    = -61,  /*write permissions error*/

Maybe you are looking for

  • Sick iMac - Help needed!

    _My set-up:_ 24" iMac 2.8GHz, 4GB RAM, 320GB hard drive 15.4" MacBook Pro, 2.4GHz, 4GB RAM, 200GB hard drive Airport Extreme 802.11n AppleCare _The problems:_ 1) My iMac will routinely, more often than not, have extremely slow connection speeds to th

  • Cannot select images from iPhoto

    I made a desktop AIR application that allows users to upload images to our server. Everything works except for Mac people trying to select images from iPhoto. This is how I have the file selection setup: private var fileRefList:FileReferenceList; pri

  • Steps in case of imported p.o

    PL.TELL ME STEP BY STEP FOR IMPORTED P.O. WHICH VENDOR iHAVE TO ENTER. THANKS NIRUPAMA

  • Adobe Animate and DPS

    Hey guys, Heres my little problem; I have two objects animated in Animate, when I load 1 into DPS, it plays fine but when I put two (which i need), only one plays, whichever gets touched first and the other one freezes and doesnt do anything. here is

  • Random "New Mail" Sounds

    Can anyone help me with this, or has anyone experienced this... For the last couple of days my iPhone vibrates and makes the "new mail" sound. I look at my mail, text messaging, calendar and no new messages. I have checked my preferences and I don't