Error code when attempting to burn a CD

I have a Satellite S870, just days out of warranty. I am trying, for the first time ever on this machine, to burn a CD and I am getting an error code 319A0-34-00000000 so the burning is not working. Help!

Hi
it is possible that the ISO (image) you're trying to burn is larger than the capacity of the disc.
or the data you're trying to burn is larger than the disc.
*********Click on Kudos if it helped you. Thanks! ***********

Similar Messages

  • Error code when attempting to burn a DVD    OSStatus Error = -34

    Any suggestions?

    Not much on this.
    Similar: https://forums.adobe.com/thread/1468841?q=OSStatus%20Error%20=%20-34
    Mac OS error.

  • How can i fix a 4280 error code when trying to burn cd's on itunes

    How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

    Did you by chance find out a solution with your problem?     I am having the same issue with the same drive.    I even uninstalled iTunes and completely reinstalled it.
    Thank you for any help anyone can offer.    I'm not having any luck finding answers on the net.     Thx.

  • Error Code when trying to burn from a burn folder

    Hey everyone,
    I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy. I was trying to burn some files onto a CD, it recognized the blank CD, displayed it in my finder as well as the burn icon, I had all the files set up, I hit burn, went to the speed selector, and then when I hit ok an error message popped up saying could not burn "Error Code 0x80020000). Any clue as to why that is? This is the first time I have had a problem burning files, both music and data have worked before.
    Thanks for the help.

    Hi, Joshua.
    I presume you are using the internal optical drive that shipped from the factory with your PowerBook G4.
    1. You wrote: "I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy."Be careful not to "tidy up" anything outside of your Home folder or the Macintosh HD > Users > Shared folder. Your Home > Library folder is another folder that should not be altered unnecessarily.
    "Tidying" System files can render your Mac inoperable unless you either:
    • Have a deep understanding of Mac OS X and the files in question.
    • Are instructed to remove such a file by someone with such understanding.
    2. You wrote: "Error Code 0x80020000)"This is an "Internal Disc Recording" error.
    You may have selected too high a speed for the optical media or the optical drive, have bad media, or be using optical media that your optical drive cannot see correctly. Some new, high-speed media use dyes that are problematic with older Mac optical drives. See Macintosh: Factors That Affect Writing to or Reading From Optical Media. If you've not used this brand of media before, try a brand and speed of media that has worked in the past.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Error Code when trying to burn cds

    Hi
    i have tried to burn cds using my iMac but for the last while i have been getting the same error , "burning of the disc failed because communication to the disc drive failed. Error code 0x80020022"
    this error appears if i try to burn music cds or data cds ( documents/photos etc. ) . i searched through all the forums but i can't find a solution. i have tried using disk utility to repair permissions etc. but it says there all fine. i have tried changing cd brands but it doesn't make a difference. i can't use the hardware test on my installation cd because it just spins in the cd and then spits the cd out and just starts as normal yet when i put in a cd it reads it and asks if i want to import it into iTunes. i downloaded Onyx and let it do its thing but that didn't fix it. i also went looking but i can't find a firmware update for the cd drive on my mac. the cd drive in my mac is a "MATSHITA CD-RW CW-8124" . I was wondering if this was a common problem and how do i go about fixing it. one person told me that the cd burner would probably need to be replaced in order to fix this problem is that correct and is that costly . i'm at a loss to what else i can try so i would be very thankful for any help or information you could give to help me get this back working again. Thanks a million
    Paul

    Hi there,
    I am writing here as an "end-user" and not as a professional computer advisor, and because I've had some problems alike with my older iMac. I've written about my case in here:http://discussions.apple.com/thread.jspa?threadID=1832474&tstart=0
    I would also like to know if there are some procedures to do in OS X (I have 10.3.9) regularly to make sure that the internal cd-rw-drive burns without "having it's own opinion" and giving all kind's of stuped error-signals or even throwing-out the cd-rw's when ordered to burn them.
    I haven't figured out if there is a straight way to do this in OS X with the original Apple-applications. However, I've found a 3rd party freeware application called Burn X Free (1.5 (v1.5)) which at the moment seems to work and do the job of burning cd-rw's. Earlier I was able to burn them in Finder, after going from OS X 10.2.8 to 10.3.9 I begun to have burnig-problems, but might be that the origin of the problems is not the X 10.3.9. Anyway, with my user short experience of Burn X Free (1.5 (v1.5))-application I can recommend it if nothing else after all maintenance procedures works...
    However, I would like to know how you solved the problem after all.

  • Error 2131 when attempting to burn cds

    When I try to burn a CD weather it be songs purchased form itunes of a CD i have inported to itunes it is never successful and burn error 2131 always comes up.
    Can anyone help me with this?
    Thanks

    hi,
    Microsoft Windows Vista Home Basic Edition (Build 6000)
    FUJITSU SIEMENS ESPRIMO Mobile V5535
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 001EAC800229A3D0
    Current user is not an administrator.
    The current local date and time is 2011-07-04 13:46:54.
    iTunes is not running in safe mode.
    WebKit-accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Silicon Integrated Systems Corp., SiS Mirage 3 Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.3.1.55 is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1), GEARAspiWDM (2.2.0.1),
    F: TSSTcorp CDDVDW TS-L632H, Rev fs03
    Audio CD in drive.
    Found 2 songs on CD, playing time 08:28 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:37:41
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are:   24.
    The drive CDRW speeds are:   24.
    The drive DVDR speeds are:   24.
    The drive DVDRW speeds are:   24.
    Error Correction is turned on for importing audio CDs.
    Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
    The last failed audio CD burn had error code 2131(0x00000853). It happened on drive F: TSSTcorp CDDVDW TS-L632H on CDR media at speed 0X.

  • I keep getting error codes when attempting to publish using FTP...

    "The operation cannot be completed because one or more required items cannot be found. (Error code -43)." That pops up before I can enter my FTP password.
    The other one is not popping up right now, but when I finally was able to enter my FTP password, another error code pops up. It was -36. Can't remember the words.
    Please help me. I NEED(ed) to publish this website yesterday! Thank you!

    I got it to come up! The other error code says "The Finder cannot complete the operation because some data in "ftp://[email protected]" could not be read or written. (Error code -36)"
    This is the on that pops up only after I enter the (correct) FTP password.

  • Error message when attempting to burn a CD

    I get and error message that reads: "The Attempt to burn a dis failed. An unknown error occurred: 2123"
    I am able to burn discs through media player, so it's not the drive.
    I have reinstalled itunes.
    Help?
    Dell   Windows XP  

    You'll get instructions on this page: About iTunes Music Store Authorisation and Deauthorisation

  • Error code when trying to burn a CD of pictures

    What does this error code mean?
    The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
    It happens each time I click burn to disk?
    Thanks.

    This is the discussion area for the iMac G4.
    Do you have an iMac G4? Or do you have an Intel-based iMac as your system information states? If you have an Intel-based iMac you should post in the Intel-based iMac discussion area.

  • Error message when attempting to burn idvd project

    please help. I have recently created several movies from vhs with no problems in idvd, the latest one is giving me problems though.
    i created the movie in imovie and shared it with idvd (no problems) used the same exact theme as the other two movies (made sure there were no error messages in any of the menus) and clicked burn. Everything appears to encode properly, but i get an error message in the burn stage and need to force quit to exit idvd. after three attempts i now also get a "multiplexor" error.
    I tried to make a burn disc with a small file to see if the superdrive is functioning properly and it seemed to take forever (never happened before)
    Any ideas? I'm trying to get this done before Christmas.

    alright, i added new ram, so i am running 2 gigs now, tried again...failed. i get all the way to burn and a popup comes up saying burning finished errors found during the burning process, i click ok and the burning wheel is still turning and i need to force quit to get out of idvd. i might go crazy, so any help is appreciated.

  • Receiving "Fatal Error" message when attempting to burn BluRay

    I have completed a BluRay project and am trying to burn to a BluRay.  The process goes fine until it starts the burn process.  The project is about 19g and I am ttrying to burn to a 25g bluray BD-R.  It takes about 6 hours to go through the process.  When the progress meter shows 100%, it goes into the burn process and after only a few minutes, I receive a "Fatal Error" message and that's it, no further messages and nothing written to the bluray.  I end up clicking on the "cancel" button which takes me back to the project.
    Running Elements 7.0 on Windows 7 with plenty of horsepower.  Can give specifics if someone thinks that could be the problem.  Is there a way to burn the HD project to the computer and then use other software to burn to my Bluray internal burner??

    Hi All,
    I have a similar error with the config details below.
    The work-around that I found was to end all processes that have nothing to do with PrE - especially McAfee and GoogleDeskTop stuff (sorry if I am getting close to the line citing names - but it does seem to be related) and to put PrE in high priority using the Windows Task Manager / Processes facility.
    This solution does work even with chapters although I have not yet been able to burn a BD with menus yet - this may be due to the version 4.0 of PrE that I am using.
    My issue was all the more frustrating in that my project lasting approx 90mins in realtime was taking approx 25hrs (> 1 day) to render to AVCHD, And after rendering, the Fatal Error msg appeared but PrE was locked and the only way to get out was to end process PrE and restart Windows - no intermediary AVCHD file was saved so I had repeated this process several times over a week before finding this solution after reading this website,
    What a shame; I had bought a new powerful laptop with PrE 4.0 and a BD writer pre-installed and yet it seems to hard to get a basic BD !!
    In case it can be of interest, I compared burning BDs using AVCHD and MPEG-2 (1920X1020) and, on my 40"LCD I cannot really see any difference in quality. As the MPEG-2 renders and burns in approx 1/10th time of AVCHD, I think that I'll be sticking to this compression.
    Here are the details of the system:
    Intel Pentium CoreDuo 2.26GHz
    Windows Vista
    4Gb DDR2
    500Gb internal drive with over 50% free
    Source HDV footage stored on external 320Gb HDD via USB2.
    PrE4.0
    I hope that this helps.

  • Unknown error 4251 when attempting to burn a CD

    Since I've upgraded to itunes 6, I can't burn a CD. Any attempt results in an unknown error 4251. My firmware's up to date; nothing else has changed. So, how do I burn a CD now?!

    hi Ilkka!
    no particularly focussed advice I'm afraid. but there's still a few other things apart from the CD-drive firmware mentioned here that are worth checking up on:
    http://docs.info.apple.com/article.html?artnum=93360
    http://docs.info.apple.com/article.html?artnum=93286
    ... and these resources might be helpful:
    http://docs.info.apple.com/article.html?artnum=300252
    toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
    ... and if no joy with those, head here to check for other documentation and to submit your CD diagnostics to Apple:
    http://www.apple.com/support/itunes/windows/cddiagnostics/
    ... and periodically refresh your thread here with another post, so passers-by will be able to update you on any developments.
    love, b

  • ITunes Medium Error note When Attempting to Burn Cds.

    Ive had no trouble with iTunes till now.
    I keep getting an error message saying the burn could not be completed because of medium write error.
    is this just my cds. even tho ive tried several types? or something worse like my drive is dead?
    it still rips and plays cds. It just wont burn them onto blanks....

    ...in my experience, anytime it says media or medium, they are referring to the blanks or the disk drive itself; so, yeah, I'd say that it might be your blanks or your burner's inability to use those specific blanks properly... imho, that is...

  • Error 4261 when attempting to burn disc

    I was able to burn discs just fine but then suddenly I get this error 4261. The disc willl begin to burn and then I get a message saying cancelling disc burn and the disc ejects and I get a message ending with 4261.
    Have lowered the recording speed, bought new CD-R discs;
    Has anyone found the fix to this?

    I am having the same problem - I just switched to 5.0 and can't burn.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    iTunes 5.0.0.35
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: 64MB NVIDIA GeForce2 MX with TV Out\GeForce2 MX
    IDE\DiskWDCWD2500JB-00EVA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
    SBP2\AppleComputer_Inc.&iPod&CmdSetId104D8&GenDisk, Bus Type IEEE 1394
    IDE\CdRom16X8DVD_DUAL___________________________A04b___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomLITEONDVD-ROM_LTD163___________________GDHA___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: LITEON DVD-ROM LTD163, Rev GDHA
    Audio CD in drive.
    Found 6 songs on CD, playing time 25:27 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:14:15
    Track 3, start time 06:23:42
    Track 4, start time 13:42:27
    Track 5, start time 20:26:15
    Track 6, start time 23:38:00
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: 16X8 DVD DUAL, Rev A04b
    Audio CD in drive.
    Found 9 songs on CD, playing time 36:29 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 05:13:73
    Track 3, start time 08:37:63
    Track 4, start time 11:33:39
    Track 5, start time 16:09:71
    Track 6, start time 20:48:29
    Track 7, start time 24:03:50
    Track 8, start time 27:19:00
    Track 9, start time 31:47:46
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 48.
    The drive CDRW speeds are: 48.
    The drive DVDR speeds are: 48.
    The drive DVDRW speeds are: 48.

  • Sense Code 0X00023A02 error when attempting to burn RW

    Hello. I am recieving this error when attempting to burn from to a DVD-RW or a DVD+RW. I know the first thing that is going to be mentioned is additional software such as on the "things to avoid" list when burning DVD's, however, I have all versions of Encore that have been produced, so I simply uninstalled 2.0 which was giving me the error code, and installed 1.5 and was able to burn a project with the same exact disc. I uninstalled no other software and did nothing else, besides rebooted, which I always do when I install and uninstall my applications. Therefore my thinking is that it is within Encore. It also with another RW in 2.0 states that it cannot erase the disc even if I do not have auto erase selected, and the disc was previously erased with Nero. I am actually sort of angry because I purchased a new burner to test out this error that I was recieving, and while I can indeed return the burner, I noticed others are being advised to check other software they have on their system. I have none of the software listed on the detrimental applications that may interfere with the burning process and I also now have (2) less than a year old burners along with a "not soo inexpensive" application that in essence does not work in a way I need it to. Yes, I can uninstall 2.0 and simply use 1.5, but I should not have to do this. And though I know this is not going to be answered by Adobe techs, please take note that the burn "Does complete without error simply by uninstalling 2.0 and installing 1.5 and creating the same exact project with the same source files". Therefore there is something within 2.0 causing these errors.
    Damon

    Neil and Jeff, thanks for the response. I am running a 965P chipset board and my PATA is connected via the JMicron controller, so my drive do not appear this way. It only shows the General, AutoPlay, Hardware and Sharing tabs. This is something that is an issue with this chipset from what I am being told. However, if this were the case(and god no man, no roxio installed on the system), shouldn't it be interfering with 1.5 burning the project also? This is why I am soo set it being 2.0 since 1.5 burned the project with no issue whatsoever. It's only in 2.0 that it is stating this error with the +RW or with the -RW it is stating that the disc cannot be erased. I understand completely what you all are saying, but I honestly do not believe this is the issue since one version of Encore will work and the other will not, unless something has changed in Encore 2.0. I understand that it was pretty much re-written(I was on the beta myself), but at that point, I never needed to use RW's, so I did not test with them, otherwise I would have reported it.
    I cannot even get into the drive for recording via the Device Manager, so changing this option is not a possiblity. It is unfortunate that from what I have seen only one mfg makes a SATA dvd burner, and from what I have read, it isn't that great of one.
    I am just at this point lost and wondering if I should simply return the burner I purchased and buy an external USB 2.0 unit and see if it works with that. What do you all think?

Maybe you are looking for