Error code when attempting to burn a DVD OSStatus Error = -34

Any suggestions?

Not much on this.
Similar: https://forums.adobe.com/thread/1468841?q=OSStatus%20Error%20=%20-34
Mac OS error.

Similar Messages

How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC. In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:". I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive. I disabled the virtual CD and rebooted. This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn. I tried the burn again and the DVD burner was no longer recognized.
I then removed PE13 and reinstalled it - no errors during the install. Tried again and same result - no DLLs.
Any help would be greatly appreciated.
Thanks for your time,
Mark

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

When attempting to burn a dvd to a memorex DVD Rdl 8.5GB blank disc, the program says it's not a recordable disc. The content is a 6.5GB Quick Time Conversion video.

When attempting to burn a Quick Time Conversion video to a Memorex DVD+Rdl, 8.7GB blank disk, the program reponds that the dic is not recordable. It's a new blank disk. The video is 8.29GB in size.

Hi
I see two problems
• Memorex never worked OK on Mac when doing Video-DVDs - I only use Verbatim (more organic dye in them)
• Size in Gbs - iDVD doesn't care about Gbs at all only duration. And Duration is the sum of Movie time AND MENU TIME.
I have 500Mb files that are to large to fit and 50Gb files that fit's nicely.
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
Yours Bengt W

Anyone know what I do when attempting to burn a dvd and the message "authority failed" appears?

Hey guys. Anyone able to help me out? Have burned multiple times on my MacBook with the downloaded Burn program. Just got iMac, downloaded, transfered the files to the right place, it began to work, then "Authority failed, there was a problem authorizing the DVD". Transfered the same file over to MacBook, was incapable of burning it. Did a test with a different file/movie I had made, was capable. Any chance the particular movie I am trying to burn is to large for the Burn program? Any ideas? I'm in a bind here with people waiting to see this stuff.

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

Error code when attempting to burn a CD

I have a Satellite S870, just days out of warranty. I am trying, for the first time ever on this machine, to burn a CD and I am getting an error code 319A0-34-00000000 so the burning is not working. Help!

Hi
it is possible that the ISO (image) you're trying to burn is larger than the capacity of the disc.
or the data you're trying to burn is larger than the disc.
*********Click on Kudos if it helped you. Thanks! ***********

Sense Code 0X00023A02 error when attempting to burn RW

Hello. I am recieving this error when attempting to burn from to a DVD-RW or a DVD+RW. I know the first thing that is going to be mentioned is additional software such as on the "things to avoid" list when burning DVD's, however, I have all versions of Encore that have been produced, so I simply uninstalled 2.0 which was giving me the error code, and installed 1.5 and was able to burn a project with the same exact disc. I uninstalled no other software and did nothing else, besides rebooted, which I always do when I install and uninstall my applications. Therefore my thinking is that it is within Encore. It also with another RW in 2.0 states that it cannot erase the disc even if I do not have auto erase selected, and the disc was previously erased with Nero. I am actually sort of angry because I purchased a new burner to test out this error that I was recieving, and while I can indeed return the burner, I noticed others are being advised to check other software they have on their system. I have none of the software listed on the detrimental applications that may interfere with the burning process and I also now have (2) less than a year old burners along with a "not soo inexpensive" application that in essence does not work in a way I need it to. Yes, I can uninstall 2.0 and simply use 1.5, but I should not have to do this. And though I know this is not going to be answered by Adobe techs, please take note that the burn "Does complete without error simply by uninstalling 2.0 and installing 1.5 and creating the same exact project with the same source files". Therefore there is something within 2.0 causing these errors.
Damon

Neil and Jeff, thanks for the response. I am running a 965P chipset board and my PATA is connected via the JMicron controller, so my drive do not appear this way. It only shows the General, AutoPlay, Hardware and Sharing tabs. This is something that is an issue with this chipset from what I am being told. However, if this were the case(and god no man, no roxio installed on the system), shouldn't it be interfering with 1.5 burning the project also? This is why I am soo set it being 2.0 since 1.5 burned the project with no issue whatsoever. It's only in 2.0 that it is stating this error with the +RW or with the -RW it is stating that the disc cannot be erased. I understand completely what you all are saying, but I honestly do not believe this is the issue since one version of Encore will work and the other will not, unless something has changed in Encore 2.0. I understand that it was pretty much re-written(I was on the beta myself), but at that point, I never needed to use RW's, so I did not test with them, otherwise I would have reported it.
I cannot even get into the drive for recording via the Device Manager, so changing this option is not a possiblity. It is unfortunate that from what I have seen only one mfg makes a SATA dvd burner, and from what I have read, it isn't that great of one.
I am just at this point lost and wondering if I should simply return the burner I purchased and buy an external USB 2.0 unit and see if it works with that. What do you all think?

I keep getting the error: "Menu Encoding Error... need to stop burning process" when I attempt to burn a DVD

Very frustrating... I'm trying to burn a DVD and I've done it about 100 times before. I've checked the mapping for errors and found none. When I attempt to burn a DVD, the error mentioned above appears after a few minutes. I've tried to update all software, restart the computer, and use other DVRs. Any adivice would be most helpful. Thanks in advance!

Hi
To be able to help we need more exact information and that You try out every suggestion as precise as possibly.
First step is as always - separate encoding from burn-process - By Save as a DiskImage from File menu in iDVD (as suggested by Old Toad)
If problem persists in encoding part then
• iDVD got a corrupted pref file - very common problem
• Space on Start-Up (Mac OS) hard disk get's too low to be able to store the temp. files from iDVD and Mac OS (can not be stored elsewhere)
• Material feed into iDVD - can not be digested as strange video codecs and audio files in .mp3 .wma and other exotic formats.
iDVD pref file - to find out if this is the problem - Easiest and most secure way is to - Create a new User-account and log into this. Re-try iDVD - If it now works OK then the problem is very close to 100% in the pref file. Either do Your work in the new Account or go back and trash the old pref file.
Space on Start-Up HD - I never go under 25Gb to let iDVD and Mac OS run OK
Material - Here You need to supply specific information
• Video - from what Camera - in what codec - If You can open a video file in QuickTime-Player then here open Inspector and read Video format/Codec: nnnnnnnn, size and frame rate - and tell us
• Audio - All audio I use is in .aiff 16-bit 48kHz (as from my miniDV Camera or 44.1 kHz as from Audio-CDs all other is converted to this. iTunes is even more problematic. Here I collect all needed audio into a new PlayList and this I BURN out as a standard Audio-CD (.aiff) (never .mp3) and in my movie projects I use the files from this CD.
Yours just trying and Guessing Bengt W

I am getting error code 0x8002006E when trying to burn a DVD

Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

When trying to Burn a DVD I get the following error: 'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03' Please advise

when trying to Burn a DVD I get the following error:
'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03'
Please advise

this reccommendation is to OS 10.5.8 only
Go to the hard drive find the following folders and look for the following file, com.apple.finder.Plist, delete it and restart the computer. Its found under the following folder Users-account name-library-prefrences. This helped resolve my issue for now.

When attempting to burn a 1.2GB video using Magic DVD I get Burning Prep error. Not enough free disk space...... I have tried all I know to no avail. This have just started!!

When attempting to burn a 1.2 GB video using iDVD I get a "Burning Preparation Error.. Not enough free disk space for encoding the remaing assetts" This has only justed started to happen. I have used this programme many times before in the past. Can any one help as I have tried all I know?

Yes, 44GB is sufficient. I don't think space is the problem. I don't know about iMovie but iDVD can only use the boot drive for its scratch disk.
You might be getting that error due to some damage file in the project.
Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
Also run Disk Utility and verify the disk. If errors are indicated you will need to boot iknto your system install disk and repair the disk with Disk Utility (see the Utilities menu in the first window after the language selection window).

How can i fix a 4280 error code when trying to burn cd's on itunes

How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx.

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

When trying to burn a DVD, I have Disc Burning Errors. What Can I do?

When trying to burn a DVD, I have Disc Burning Errors. What Can I do?

Since Premiere Pro after version 2 does not burn a DVD at all, you should ask in the Encore forum
http://forums.adobe.com/community/encore?view=discussions
When you go there, the KIND of information you need to supply
PPro Information FAQ http://forums.adobe.com/message/4200840

Error code when attempting to burn a DVD OSStatus Error = -34

Similar Messages

Maybe you are looking for