Error code when trying to move capture scratch files

I tried moving the capture scratch files for 10 interview files I have created from my documents to my external hard drive. I was able to move the render files without any problem but each time I try to drag a capture file from my documents and place it in the capture folder on my external hard drive I get the following error " Sorry, the operation could not be completed because an unexpected error occurred. Error Code (0)."
The external drive still has 261 GB empty, so not sure what the problem is.

What would be the best way to approach this. Can I buy a firewire external hard drive and connect both it and the USB drive to my computer and move files from the USB drive to the firewire drive? And also move the capture files to the firewire drive?
Will my local apple store be a good place to buy the correct drive?
Thanks for working me through this.

Similar Messages

  • I am getting this error code when trying to open an mpeg4 "OSStatus error -12909" anyone know why. Thanks

    I am getting this error code when trying to open an mpeg4 file "OSStatus error -12909"
    Has anyone had this happen to them.
    I am new to the support community.
    Thanks

    Is this coming from a link, or from something you are trying to type in the address bar?
    Try replacing the "html" at the start with "http",
    so if you have html://somesite.edu,
    change it to http://somesite.edu.

  • How can i fix a 4280 error code when trying to burn cd's on itunes

    How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

    Did you by chance find out a solution with your problem?     I am having the same issue with the same drive.    I even uninstalled iTunes and completely reinstalled it.
    Thank you for any help anyone can offer.    I'm not having any luck finding answers on the net.     Thx.

  • How do I fix a 1611 error code when trying to restore my ipod?

    How do I fix a 1611 error code when trying to restore my ipod touch?

    Click here and follow the instructions.
    (120576)

  • Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    A12E1 download & install error http://forums.adobe.com/thread/1289484
    -more A12E1 discussion http://forums.adobe.com/thread/1045283?tstart=0
    Case sensitive https://forums.adobe.com/thread/1483096 may also help... or may not, I'm on Windows

  • Error 36 when trying to move copy or compress a .mpg file

    Error 36 when trying to move, copy or compress a large .mpg file (32gb!)
    please help I have tried everything on Google (dot_clean/safe mode etc) need help!

    BDAqua wrote:
    I hear 3rd Party, or HW Raid 0/1/5/10 are OK, but 6 months is the absolute most I got out of my many screaming RAID setups before they completely lost it!
    Bummer. I'm not really doing this for speed though, just for total storage volume and constant, worry-free, no-brainer back-up. I guess RIAD in general is something I need to study up on. Would a simple mirror of one 500GB drive to another (back-up) - and do that twice - be a better, more reliable way to go?
    I've used Tri-Backup3/4 for years for Backups, it's fast, automatic, reliable, works in the background if you wish...
    Back-up software always seemed to have some kind of a hiccup to it, but I'll certainly look into Tri-Backup3/4. I used to Retrospect years ago, a rather fussy thing if I recall.
    Now, on the Safe Mode boot - not a success BUT a different result!
    I got the -36 again, but this time it was the external drive FILE that errored, not the OS-resident drive.
    In other words, pre-Safe Mode the error said "...because some data in "ZillaHAL" could not be read or written." (ZillaHAL is my OS-X drive).
    In Safe, it read, "...because some data in "WinXP Pro.vmem" could not be read or written."
    "WinXP Pro.vmem" is the virtual machine file - which basically is a simple Mac volume (folder) containing all of the files to run my XP virtual machine.
    Also, this time, a file* did manage to remain on the external drive whereas before, after the error, no file at all remained.
    * a generic icon appears, but it shows a size of 16+GBs. The actual file is 18.13GB - I did manage to shrink it down the other day (from it's previous 25GB).
    Well, that's it for now. I'll be away for three days, so don't mind me if I cannot reply back for a spell.
    Thanks BD,
    mp

  • HT5701 why do I get 3072 error code when trying to download 6.0.4

    why do i get 3072 error code when trying ot download 6.0.4

    Some details, please?
    Based on the version number, you seeking to upgrade Safari?
    What OS X version?
    How are you upgraded or downloading the software?   (Directly downloaded, or via Software Update?)
    Have you tried quitting all applications, and then performing the Software Update?   (Discussion per this thread — but that thread is for iTunes, and I'm guessing you're looking at Safari here?)  If that doesn't work, I'd keep everything quit, reboot, and try again.

  • Hello.  I am receiving "error codes" when trying to dowload songs.  It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online.  Help?

    Hello.  I am receiving "error codes" when trying to dowload songs.  It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online.  Help?

    I don't know exactly what they said b/c they are nolonger on my screen.  It said something to the effect of "incomplete dowload, there was an eror during the dowload of *Song*".
    The songs purchased were showing in my purchased list with an "exclamation point" by them, which I believe indicates the download was incomplete.  I restarted iTunes and the songs are no longer on my "Purchased list".
    I was still charged after restarting iTunes

  • I get error 23132 when trying to open a M4v file

    I use to be able to play m4v files on both iTunes and Quick Time 7. Suddenly, after upgrading iTunes, I get error 23132 when trying to open a M4v file. How do I fix it to view the files on QuickTime?

    There is software you installed to work with your company's cloud service, update it or talk to the developer.
    If it's Apple's software,  then run through this list of fixes.
    ..Step by Step to fix your Mac

  • I got an error code when trying to update Ph Shop CC   U44M1P7

    I got an error code when tryong to update Ph Shop CC    U44M1P7

    Try http://forums.adobe.com/message/5980657

  • I get an error code when burning a movie to DVD

    I use Premiere Elements 10 in my iMac OS lion vers. 10.7.2
    I have 250 Gb free on my hard disc. The movie I try to burn is between 3-4 Gb
    When starting to burn my movie to a DVD the following is seen in order on the screen:
    Encoding Menu 2 of 2
    Computing Media
    Burning disks 1 of 1
    and then it burns (at the end pretty quickly) to 99% and stay there.
    I get an error code:
    Internal software error: /Users/labuser/premiere/elements/molecules/pre10-bullseye/molecule-17/External/AuthorScri pt/Source/DVDCreator/FormatLib/Ma.....
    When I look on the DVD, it looks like nothing has been burnt to the DVD.
    What can be wrong?
    gardie10

    I still have trouble with burning my movies to DVD.
    Have tried the following:
    Found that I had "-" in many of my file names (clips). I removed them from the file names, but this had no effect.
    I moved my entire project folder to a shorter path folder. This had no effect.
    I have not managed to find blank DVDs on sale here in Gothenburg, but will try to buy them online.
    I have four movies that I want to burn on DVD discs.
    Have succeeded in burning two of them.
    I've tried to find what distinguishes between the two that are OK and the two that I have not succeeded with. They are all at about the same size, about 27-29 minutes long.
    The clips are .m2ts and .mts files.
    In one of the movies that are OK, all the clips are .m2ts files. In the second movie (that is OK), most of the clips are .m2ts files, but also there are .mts files.
    In the other two movies that are not OK, it's a mix of .m2ts and .mts files.
    When I try to burn the two movies which failed, I get the same course as I showed earlier (with an error code).
    I must admit that I was wrong when I previously wrote that I could burn all the movies to my hard drive. The ones I can not burn to DVD, I can not burn to my hard drive.
    gardie10

  • -77043 Error code when trying to enable contouring.

    Hello,
    I am currently trying to control a servo motor using a cRIO-9004 RT Controller and cRIO-9104 Chassis with an NI 9505 I/O Module. However, in my user interface loop, I get an error -77043 when I try to enable contouring in this code and this disallows me from causing motion using the contour data I input later on in the code. Does anyone have any idea how I can fix this?
    Thanks for any help. Sorry for lack of images, I am unable to upload.

    Hey rustawilliams,
     If you go to Help»Explain Error
    from within LabVIEW and type in that same error code you will see
    LabVIEW describe possible reasons for that error code as "NI
    SoftMotion:  The requested interval between contour points in the
    buffer is invalid." My first thought for the cause of this error to be
    the order in which you set up your contour move. What happens if you
    switch the order in which you enable your contouring and when you load
    your points; i.e. if you load your contouring points and then enable
    the contouring?
    Hope this helps.
    -Ben
    WaterlooLabs

  • Error Code when trying to burn from a burn folder

    Hey everyone,
    I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy. I was trying to burn some files onto a CD, it recognized the blank CD, displayed it in my finder as well as the burn icon, I had all the files set up, I hit burn, went to the speed selector, and then when I hit ok an error message popped up saying could not burn "Error Code 0x80020000). Any clue as to why that is? This is the first time I have had a problem burning files, both music and data have worked before.
    Thanks for the help.

    Hi, Joshua.
    I presume you are using the internal optical drive that shipped from the factory with your PowerBook G4.
    1. You wrote: "I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy."Be careful not to "tidy up" anything outside of your Home folder or the Macintosh HD > Users > Shared folder. Your Home > Library folder is another folder that should not be altered unnecessarily.
    "Tidying" System files can render your Mac inoperable unless you either:
    • Have a deep understanding of Mac OS X and the files in question.
    • Are instructed to remove such a file by someone with such understanding.
    2. You wrote: "Error Code 0x80020000)"This is an "Internal Disc Recording" error.
    You may have selected too high a speed for the optical media or the optical drive, have bad media, or be using optical media that your optical drive cannot see correctly. Some new, high-speed media use dyes that are problematic with older Mac optical drives. See Macintosh: Factors That Affect Writing to or Reading From Optical Media. If you've not used this brand of media before, try a brand and speed of media that has worked in the past.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • I get this error code when trying to update from an older version of Firefox: The operation can't be completed because you don't have permission to access some of the items.

    While trying to upgrade from a previous version of Firefox, I get this error code: "The operation can’t be completed because you don’t have permission to access some of the items."
    == installing ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

  • Error Code when trying to burn cds

    Hi
    i have tried to burn cds using my iMac but for the last while i have been getting the same error , "burning of the disc failed because communication to the disc drive failed. Error code 0x80020022"
    this error appears if i try to burn music cds or data cds ( documents/photos etc. ) . i searched through all the forums but i can't find a solution. i have tried using disk utility to repair permissions etc. but it says there all fine. i have tried changing cd brands but it doesn't make a difference. i can't use the hardware test on my installation cd because it just spins in the cd and then spits the cd out and just starts as normal yet when i put in a cd it reads it and asks if i want to import it into iTunes. i downloaded Onyx and let it do its thing but that didn't fix it. i also went looking but i can't find a firmware update for the cd drive on my mac. the cd drive in my mac is a "MATSHITA CD-RW CW-8124" . I was wondering if this was a common problem and how do i go about fixing it. one person told me that the cd burner would probably need to be replaced in order to fix this problem is that correct and is that costly . i'm at a loss to what else i can try so i would be very thankful for any help or information you could give to help me get this back working again. Thanks a million
    Paul

    Hi there,
    I am writing here as an "end-user" and not as a professional computer advisor, and because I've had some problems alike with my older iMac. I've written about my case in here:http://discussions.apple.com/thread.jspa?threadID=1832474&tstart=0
    I would also like to know if there are some procedures to do in OS X (I have 10.3.9) regularly to make sure that the internal cd-rw-drive burns without "having it's own opinion" and giving all kind's of stuped error-signals or even throwing-out the cd-rw's when ordered to burn them.
    I haven't figured out if there is a straight way to do this in OS X with the original Apple-applications. However, I've found a 3rd party freeware application called Burn X Free (1.5 (v1.5)) which at the moment seems to work and do the job of burning cd-rw's. Earlier I was able to burn them in Finder, after going from OS X 10.2.8 to 10.3.9 I begun to have burnig-problems, but might be that the origin of the problems is not the X 10.3.9. Anyway, with my user short experience of Burn X Free (1.5 (v1.5))-application I can recommend it if nothing else after all maintenance procedures works...
    However, I would like to know how you solved the problem after all.

Maybe you are looking for