Error code with HP DesignJet T520 ePrinter
Good day everyone, recently I had a customer drop off this machine for service. It is of a type I am completely unfamiliar with. Apparently the machine spends most of its time in a hard shell storage case in a warehouse and is only used when the group has to leave the area and travel elsewhere. They are leaving in a few weeks and pulled this machine out to ops ck. it. Upon power up, the machine shows the HP loading screen and then goes to a bluescreen. At the top there is a box of some sort that shows up in white that looks like a corrupted image. Below this is the message "805DE431". This message does not clear up with a power reset, unplugging it from the wall or anything else. I have searched the internet and through the service manuals and find no mention of an error message like this at all. Has anyone ever encountered something like this and can provide me with a direction of where to look? Thanks for any help anyone can provide.
Please, Turn on the printer and open the door ink. Check if a green LED behind the Main PCA is flashing. If a green led is not flashing, is possible that the Main PCA and Bundle Board should be replaced by onsite customer engineer.
Similar Messages
-
The camcorder displays an error code with the letter C: or E: followed by a number.
Solved!
Go to Solution.Error codes display to help diagnose issues detected by the camcorder. Below is a list of common error code numbers, followed by their causes and the necessary steps to resolve the issue.
IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are available online in the Manuals/Specs/Warranty section of the Sony® eSupport Web site.
NOTE: The xx in the error codes below represent any random numerical digits and does not affect the overall diagnosis of the issue.
Error Code
Cause
Resolution
C:13:xx
The recording media you are using is either not supported for use with the camcorder or the media has a problem.
Ensure the recording media you are using is supported for use with the camcorder or try using different recording media.
NOTE: If you have a DVD camcorder and are using a recordable DVD, the disc may be dirty or have scratches; try cleaning the disc with a soft cleaning cloth.
C:21:xx
Moisture condensation has occurred.
Remove the recording media from the camera.
Leave the media compartment open for at least one hour.
Insert different recording media into the camcorder.
Power on the camcorder.
C:22:xx
The video heads are dirty.
Clean the video heads using a dry head-cleaning cassette.
C:04:xx
C:23:xx
The battery being used is not an InfoLithium® battery.
Replace the battery in the camcorder with a Sony® InfoLithium battery or connect the supplied AC power adapter.
C:31:xx
C:32:xx
The camcorder has detected an issue that may require a power reset.
Turn off the camcorder.
Remove the battery or disconnect the AC power adapter for 60 seconds.
Insert the battery or reconnect the AC adapter.
E:20:xx
E:40:xx
E:60:xx
E:61:xx
E:62:xx
E:91:xx
E:94:xx
The camcorder has detected an issue that may require service.
Reset the camcorder to factory specifications to try resolving this issue.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. The Sony® eService Web site at https://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer. -
Error Code with Livecycle forms, when opened online - how do I fix this?
Could you please tell me how to fix issue where when I make my forms available online, they open up with an error code? I provide a link to a file, and when the user opens the file, it says there was an error - about a paragraph of text. If they save the file, and then open again in Adobe Reader, it works fine. But most of the time they think the file is corrupt, and don't want to download and save it to their computer. Below is a screenshot of the problem, and it only happens when I open the file online. And, I have already upgraded to the most recent version of Adobe, so why does this happen?
Oh, I found a great instruction page at Configure browser to use the Adobe PDF plug-in That worked! Thank you!
-
Hi
I am in the process of resetting ipod touch 32gb. I was told to update our version itunes to itunes 10. It is now on our computer. I then had to restore my ipod. It downloaded overnight. when i try to set up my ipod there is a picture on the ipod touch which implies connect to itunes ( cable to itunes icon on display) Ive done that then when I open itunes and click on the device after a short time an error code -9808 appears and says we could not complete your itunes store request and try again later. When I turn on the ipod it only shows the connect to itunes display
any ideas plsI'm having the same problem as well. I can't see to get any support from Apple on the phone. I've been on hold for 20 minutes.
-
Error code with download of application manager
Error code A12E1
What does this mean?
I can't complete downloading the adobe application manager because the message suggests I contact customer support.
How can I fix this please?
BiancaTry the direct download links for AAM found in this article
http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html -
Hi, I just want to know how to empty my trash because I keep getting this message saying " The operation can't be completed
because an unexpected error occured (error code-8003) I tried looking this up and couldn't find any refference regarding it.
Please helpPlease look to the right of the screen where it says "More Like this" you may find the resolution there.
-
M4E Error Codes with SBS/Exchange...
Hi,
Does anyone have a list of the error codes for Mail for Exchange?
I have a Nokia E61 and I am trying to link it to our SBS Server. The SBS server supports RPC/HTTP, so I know all the domain certs/settings/passwords are good.
The E61 also access the Internet via WiFi, so I know this works too.
However, after installing and checking everything I can - I see this in the error log, two error codes I dont seem to be able to find answers to anywhere!
All help most welcome!
08/05/2007 7:28:46 OffPeakTime active
08/05/2007 7:28:50 Mail For Exchange Error -30180
08/05/2007 7:37:47 Profile Updated
08/05/2007 7:37:49 OffPeakTime active
08/05/2007 7:37:50 Profile Updated
08/05/2007 7:37:51 OffPeakTime active
08/05/2007 7:37:54 Mail For Exchange Error -30207
08/05/2007 7:38:15 Setting ROAMING status to True
08/05/2007 7:38:24 Mail For Exchange Error -30207
08/05/2007 7:38:50 Profile Updated
08/05/2007 7:38:52 OffPeakTime active
08/05/2007 7:38:53 Profile Updated
08/05/2007 7:38:54 OffPeakTime active
08/05/2007 7:38:55 Cancel job:3,type1:
08/05/2007 7:38:58 Mail For Exchange Error -30207
08/05/2007 7:40:35 Profile Updated
08/05/2007 7:40:36 OffPeakTime active
08/05/2007 7:40:39 Mail For Exchange Error -30207
08/05/2007 7:41:06 Mail For Exchange Error -30207
08/05/2007 7:57:53 OffPeakTime active
08/05/2007 8:09:44 Setting OFFLINE Status to True
08/05/2007 8:40:39 Mail For Exchange Error -30180Help, I need somebody Help, not just anybody Help, you know, I need someone Help
When I was younger (less IT smart,but arrogant), so much younger than today I never needed anybody's help in any way But now these days are gone, I'm not so self assured Now I find, I've changed my mind, I've opened up the doors (i really am stuck!)
Help me if you can, I'm feeling down And I do appreciate you being 'round Help me get my feet back on the ground Won't you, please, please help me? (this M4E error is killing me!) -
Internal Table with Oracle's Error Codes
Hi,
Is there any internal table where is stored every oracle error code with it's Cause, Action and all the other similar stuff?
Att,For a table of all "ORA-" error codes and messages, you could do something like:
<BR>
create type t_oracle_error is object (
error_num varchar2(9),
error_desc varchar2(1024)
create type t_oracle_error_tab is table of t_oracle_error;
create or replace function OracleErrors return t_oracle_error_tab pipelined is
l_error t_oracle_error := t_oracle_error(null,null);
begin
for errNo in reverse -32799..0 loop
l_error.error_num := errNo;
l_error.error_desc := sqlerrm(errNo);
if l_error.error_desc not like '%Message % not found;%' and l_error.error_desc != 'ORA'||to_char(errNo,'FM09999')||': ' then
pipe row(l_error);
end if;
end loop;
return;
end OracleErrors;
select * from table(oracleerrors);
SQL> select * from table(oracleerrors);
ERROR_NUM ERROR_DESC
0 ORA-0000: normal, successful completion
-1 ORA-00001: unique constraint (.) violated
-17 ORA-00017: session requested to set trace event
-18 ORA-00018: maximum number of sessions exceeded
-19 ORA-00019: maximum number of session licenses exceeded
-20 ORA-00020: maximum number of processes () exceeded
-21 ORA-00021: session attached to some other process; cannot switch session
-22 ORA-00022: invalid session ID; access denied
-23 ORA-00023: session references process private memory; cannot detach session
-24 ORA-00024: logins from more than one process not allowed in single-process mode
-25 ORA-00025: failed to allocate
-26 ORA-00026: missing or invalid session ID
-27 ORA-00027: cannot kill current session
-28 ORA-00028: your session has been killed
-29 ORA-00029: session is not a user session
-30 ORA-00030: User session ID does not exist.
-31 ORA-00031: session marked for kill
-32 ORA-00032: invalid session migration password
-33 ORA-00033: current session has empty migration password
-34 ORA-00034: cannot in current PL/SQL session
-35 ORA-00035: LICENSE_MAX_USERS cannot be less than current number of users
-36 ORA-00036: maximum number of recursive SQL levels () exceeded
-37 ORA-00037: cannot switch to a session belonging to a different server group
-38 ORA-00038: Cannot create session: server group belongs to another user
-50 ORA-00050: operating system error occurred while obtaining an enqueue
-51 ORA-00051: timeout occurred while waiting for a resource
-52 ORA-00052: maximum number of enqueue resources () exceeded
-53 ORA-00053: maximum number of enqueues exceeded
-54 ORA-00054: resource busy and acquire with NOWAIT specified
-55 ORA-00055: maximum number of DML locks exceeded
-56 ORA-00056: DDL lock on object '.' is already held in an incompatible mode
-57 ORA-00057: maximum number of temporary table locks exceeded
-58 ORA-00058: DB_BLOCK_SIZE must be to mount this database (not )
-59 ORA-00059: maximum number of DB_FILES exceeded
-60 ORA-00060: deadlock detected while waiting for resource
-61 ORA-00061: another instance has a different DML_LOCKS setting
-62 ORA-00062: DML full-table lock cannot be acquired; DML_LOCKS is 0
-63 ORA-00063: maximum number of LOG_FILES exceeded
-64 ORA-00064: object is too large to allocate on this O/S (,)
-65 ORA-00065: initialization of FIXED_DATE failed
-66 ORA-00066: LOG_FILES is but needs to be to be compatible
-67 ORA-00067: invalid value for parameter ; must be at least
-68 ORA-00068: invalid value for parameter , must be between and
-69 ORA-00069: cannot acquire lock -- table locks disabled for
-70 ORA-00070: command is not valid
-71 ORA-00071: process number must be between 1 and
-72 ORA-00072: process "" is not active
-73 ORA-00073: command takes between and argument(s)
-74 ORA-00074: no process has been specified
-75 ORA-00075: process "" not found in this instance
-76 ORA-00076: dump not found
-77 ORA-00077: dump is not valid
-78 ORA-00078: cannot dump variables by name
-79 ORA-00079: variable not found
-80 ORA-00080: invalid global area specified by level
-81 ORA-00081: address range [, ) is not readable
-82 ORA-00082: memory size of is not in valid set of [1], [2], [4]
-83 ORA-00083: warning: possibly corrupt SGA mapped
-84 ORA-00084: global area must be PGA, SGA, or UGA
-85 ORA-00085: current call does not exist
-86 ORA-00086: user call does not exist
-87 ORA-00087: command cannot be executed on remote instance
-88 ORA-00088: command cannot be executed by shared server
-89 ORA-00089: invalid instance number in ORADEBUG command
-90 ORA-00090: failed to allocate memory for cluster database ORADEBUG command
-91 ORA-00091: LARGE_POOL_SIZE must be at least
-92 ORA-00092: LARGE_POOL_SIZE must be greater than LARGE_POOL_MIN_ALLOC
-93 ORA-00093: must be between and
-94 ORA-00094: requires an integer value
-96 ORA-00096: invalid value for parameter , must be from among
-97 ORA-00097: use of Oracle SQL feature not in SQL92 Level
-99 ORA-00099: timed out while waiting for resource, potential PDML deadlock
-100 ORA-00100: no data found
-101 ORA-00101: invalid specification for system parameter DISPATCHERS
-102 ORA-00102: network protocol cannot be used by dispatchers
-103 ORA-00103: invalid network protocol; reserved for use by dispatchers
-104 ORA-00104: deadlock detected; all public servers blocked waiting for resources
-105 ORA-00105: dispatching mechanism not configured for network protocol
-106 ORA-00106: cannot startup/shutdown database when connected to a dispatcher
-107 ORA-00107: failed to connect to ORACLE listener process
-108 ORA-00108: failed to set up dispatcher to accept connection asynchronously
-111 ORA-00111: not all servers started because number of servers is limited to
-112 ORA-00112: only created up to (maximum specified) dispatchers
-113 ORA-00113: protocol name is too long
-114 ORA-00114: missing value for system parameter SERVICE_NAMES
-115 ORA-00115: connection refused; dispatcher connection table is full
-116 ORA-00116: SERVICE_NAMES name is too long
-117 ORA-00117: value out of range for system parameter SERVICE_NAMES
-118 ORA-00118: value out of range for system parameter DISPATCHERS
-119 ORA-00119: invalid specification for system parameter
-120 ORA-00120: dispatching mechanism not enabled or installed
-121 ORA-00121: SHARED_SERVERS specified without DISPATCHERS
-122 ORA-00122: cannot initialize network configuration
-123 ORA-00123: idle public server terminating
-124 ORA-00124: DISPATCHERS specified without MAX_SHARED_SERVERS
-125 ORA-00125: connection refused; invalid presentation
-126 ORA-00126: connection refused; invalid duplicity
-127 ORA-00127: dispatcher does not exist
-128 ORA-00128: this command requires a dispatcher name
... -
Error code message not appearing
Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi 12 KBHi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi 13 KB -
I just want my content. I am frustrated at trying to get on-line help. Either I will not get a reply to my feedback form, or the online support page has an error code, with "please try again later" or "start over". I have paid for this content, and cannot download their corrupted file.
Are you in a country where TV shows can be re-downloaded - if you are then have you tried deleting that copy from your iTunes library and re-downloading it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes ?
When you say that you used the feedback page, do you mean the feedback page (which you won't get a reply to) or the 'report a problem' link from your purchase history on your account or the contact iTunes Support page ?
'report a problem' : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
contact iTunes Support : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption (if this page doesn't work then have you tried clearing your browsers history/cache and/or tried a different browser ?) -
Hello everyone,
I am working with CANopen for last 4 to 5 months, the device which i am using is Motor controller drive,Communication used is CANopen.
When I was testing for Emcy with the help of CANopen library, I am getting confused.
The plasma dictionary which I have describes the error codes for ex 3120h,3211h,3212h,3221h etc under voltage error.
But when i read the same error code with the help of Emcy Wait and Emcy Convert , Generic error bit sets .
The voltage bit does not glow and i dont get any error description , why is this????
Are the above error codes user defined??
When I open the Emcy convert VI there are some codes in which the voltage error is defined,the above error codes wont come in that category is it.
Thanks in advanceHi,
You wrote: " The voltage bit does not glow and i dont get any error description ", does that mean you expect the Voltage Error Bit set?
What is the error register Byte and the manufacturer specific error field array in your case?
The Emergency Convert Vi only knows the default errors . You can see them if you open the VI BD.
You could add your specific hex numbers thus you would get the correct message.
DirkW -
HT3964 what does error code "4MOT/2/40000004:ODD-4562" mean
william4510-imac error code with extended hardware test is error code "4MOT/2/40000004:ODD-4562" please help how could i find out if fan has stopped fully or just not going full speed ?- thanking you william4510
X423424X wrote:
You may end up having to take it to apple for them to take a look at.
Alternatively, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. -
Illustrator update: Error Code: U44M1I210
i am getting this error code with the log;
problem updating Illustrator CC:"Error installing this update. Please quit and try again later. Error Code: U44M1I210"
i have rebooted, restarted app ( no uninstalled though)
In addition Create Cloud itself ( the login box withthe app update information no longer starts
I am running update from the help menu in illustratorHi Brett,
Please refer the following help document on the problem.
https://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Regards,
Sumit Singh -
On updating Creative Cloud, I get an error code 50 - what does this error code mean?
Downloading and installing an upgrade to Creative Cloud, I keep getting an error code 50. I have look for a list of error codes with no luck. Can anyone tell me what this error code means and what the fix is? Thanks in advance.
Error 50 https://forums.adobe.com/thread/1432237 may help
-
What OSB error codes,I have to handle in the error handler stage when a route node finds that the given end point is not available and also when the end system is timing out.
Is it BEA-38000?
Thanks.You should test various scenarios in your setup and check which errors you get in different scenarios. There can be many and the error codes will depend on type of transport as well (HTTP, FTP, FIle etc)
In case of Server found but service not available, you should get BEA-380000 error code with Not Found in description:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>Not Found</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>In case server not running on same port:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: Socket Closed</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>In case of Timeout set on Business Service triggering (Target service still processing and Socket gets closed because of preconfigured timeout value on BS), you should get BEA-380000 error code with SocketTimeOut exception stacktrace in Description.
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>
[WliSbTransports:381304]Exception in HttpOutboundMessageContext.RetrieveHttpResponseWork.run: java.net.SocketTimeoutException
java.net.SocketTimeoutException
at weblogic.net.http.AsyncResponseHandler$MuxableSocketHTTPAsyncResponse$SocketTimeoutNotification.<clinit>(AsyncResponseHandler.java:551)
at weblogic.net.http.AsyncResponseHandler$MuxableSocketHTTPAsyncResponse.handleTimeout(AsyncResponseHandler.java:396)
at weblogic.net.http.AsyncResponseHandler$MuxableSocketHTTPAsyncResponse.timeout(AsyncResponseHandler.java:502)
at weblogic.socket.SocketMuxer$TimerListenerImpl.timerExpired(SocketMuxer.java:1052)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>In case of Timeout while obtaining connection to remote server:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: connect timed out</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
Maybe you are looking for
-
How to schedule the background job if report have Presentation server files
Hi All, I have searched the forums and found , the way for the scheduling the background job if report selection screen have the presentation server file input. 1. Using the Open data set method. And my client is not OK with Open dataset way, it ther
-
How to use alias in "From" field when I send a mail with utl_smtp ?
Hi all, I'm using a PL/SQL package with an Oracle 11G database to send mails. It works fine but instead of use of my mail in "From" field like "[email protected]" as sender E-mail address, I would like to have "Toto" in the sender address. I tryied t
-
Using ATV as a Media Server to Stream From?
Is it possible to use the ATV to stream music from, to say an Airport Express. I am exploring the concept of using the ATV as a media server for a whole hose audio system. I realize I can use it as a simple analog source to the whole house distributi
-
NI PCI 6225: How to start and stop an acquisition using triggers
Hi, Hi already spent two days reading the previous post on start/stop trigger and end up with just a complet breakdown.... I'm using a NI PCI 6225 for a project on brain activity. I want to start the aquisition of 10 channels at 1Khz on a first trigg
-
I am making grad invites and i keep trying to add a colored picture on top of the black and white background picture and it keeps changing the colored one black and white i am using Photoshop CC 2014! any help is greatly appreciated! I cant figure th