Error code ws-36787-1 doesn't exist??? *****?

So i linked my Facebook account and uploaded my profile pic,After a week i lost all real names and pictures from all my friends and i cant use my own anymore.Got an email from scee saying it doesn't warrant a punishment, yet i constantly get error code ws-36787-1 whenever i even try to send a real name or close friend request and when i search the error code pages on here the code doesn't exist???? I've sent a message to sony but they just ignore me.Can any1 help a desperate girl out, please.?

Ask Playstation said this about it to someone else - https://twitter.com/askplaystation/status/582793804635377664 It's worth a try I guess, it can't hurt anyway. Did you get the email from sony as a reply to one you'd sent or they just emailed you? (OP)

Similar Messages

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne

Installation & update error : config.msi\PTA9D.tmp doesn't exist

Hi,
I have this recurrent error telling me C:\config.msi\PTA9D.tmp doesn't exist, I tried to install the new vesion instead of just updating but it doesn't work.
My actual version is reader 10.1.2 french installed the 01/13/12
Thanks a lot

What is your Windows version?
Can you try to right-click on the downloaded installer, then select Run as Administrator.
If that still does not do the trick, can you try downloading the MSI installer (10.1.0, French version) from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.0/fr_FR/AdbeRdr1010_fr_FR.msi
then run the update patch http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.3/misc/AdbeRdrUpd1013.msp

Error code: the tag "img" doesn't have an attribute: "onload" in currently active versions.

I'm having trouble creating new pages from a template all of a sudden. It's giving me the error code listed above. Any ideas?

Seems like you are using the dreaded DW pop-up menus. They
flunk big time
in many ways. Please read this -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
There are much better ways. Check the uberlink and MacFly
tutorials at
PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lucille4" <[email protected]> wrote in
message
news:ghc6gm$gs$[email protected]..
> Using Dreamweaver to build a nav bar, the program adds
an onload attribute
> to
> the img tag which then won't validate.
> The error is "the tag: img doesn't have an attribute:
onload in currently
> active versions". It seems to only insert this code when
you check the box
> to
> show the down image initially. Any thoughts on why it
does this? You can
> remove
> this onload attribute and it still seems to function
properly.
>
> <td><a href="mam_rentals.html" target="_top"
>
onClick="MM_nbGroup('down','group1','rentals','b_rentals-sel.gif',1)"
>
onMouseOver="MM_nbGroup('over','rentals','b_rentals-over.gif','',1)"
> onMouseOut="MM_nbGroup('out')"><img
src="b_rentals-sel.gif" alt="Rentals"
> name="rentals" border="0"
>
onload="MM_nbGroup('init','group1','rentals','b_rentals.gif',1)"></a></td>
>

Enhancing existing Abap code: using values that doesn't exist in table

Hi, 
I would like to enhance this code . My requirement is as follows. 
I have two tables customer and product 
<pre>KNVP customer master data table
Customer PF Person
700008 YF 45555
700008 YQ 46666
700008 ZF 46666
700008 YM 49999
700008 ZQ 44444
700008 ZM 43333
T179 product hierarchy table*
product hier PF
1000014000 ZM
1000015000 ZF
1000033000 ZQ
The current extractor is showing YM for all YPF values
Customer Zperson ZPF YPF YPerson
700008 46666 ZF YM 49999
700008 43333 ZQ YM 49999
700008 44444 ZM YM 49999</pre>
 
Case 1:IF customer doesn't have Partner function value YQ in master data then partner function YF person and partner function should be use.
 
case 2: IF customer doesn't have Partner function value YF in master data then partner function YQ person and partner function should be use.
 
case3:IF customer doesn't have Partner function value YQ and YF in master data then partner function YM person and partner function should be use.
 
The tricky part is that YQ doesn't exist in T179 table
 
<pre>
LOOP AT T_DATA.
 ZIDX = SY-TABIX.
 CLEAR T179.
 Select partner function, assigned to current
 product hierarchy level 2
 SELECT * FROM T179
 WHERE STUFE = '2'
 AND PRODH = T_DATA-PRODH.
 ENDSELECT.
 Replace value with new partner function.
 by replacing first letter to 'Y'
 CONCATENATE 'Y' T179-ZZPARVW+1(1) INTO NEWPF.
 Try to find new sales employee with this new partner function
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = NEWPF.
 ENDSELECT.
 IF SY-SUBRC EQ 0.
 New partner found with this partner function
 T_DATA-ZPARVW = NEWPF.
 T_DATA-ZPERNR = KNVP-PERNR.
ELSE.
 NEWPF = 'YM'.
 Try to find new sales employee with partner function 'YM'
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = NEWPF.
 ENDSELECT.
 T_DATA-ZPARVW = NEWPF.
 T_DATA-ZPERNR = KNVP-PERNR.
 ENDIF.
 MODIFY T_DATA INDEX ZIDX TRANSPORTING ZPARVW ZPERNR.
</pre>
 Edited by: Matt on Aug 24, 2010 9:31 AM - fixed formatting

Hi,
thanks for your input, I have written it like this and it is working well for YQ and YF partner functions but YM is not showing when both are missing.
LOOP AT T_DATA.
 ZIDX = SY-TABIX.
 CLEAR T179.
* Select partner function, assigned to current
* product hierarchy level 2
 SELECT * FROM T179
 WHERE STUFE = '2'
 AND PRODH = T_DATA-PRODH.
 ENDSELECT.
* Replace value with new partner function.
* by replacing first letter to 'Y'
 CONCATENATE 'Y' T179-ZZPARVW+1(1) INTO NEWPF.
IF SY-SUBRC EQ 0.
IF NEWPF EQ 'YF'.
 READ TABLE T_KNVP WITH KEY PARVW = 'YF'.
 IF SY-SUBRC EQ 0. "YF exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YF'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YF'.
 T_DATA-ZPERNR = KNVP-PERNR.
 ELSE.
 READ TABLE T_KNVP WITH KEY PARVW = 'YQ'.
 IF SY-SUBRC EQ 0. "YQ exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YQ'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YQ'.
 T_DATA-ZPERNR = KNVP-PERNR.
ENDIF.
ENDIF.
ENDIF.
IF NEWPF EQ 'YQ'.
 READ TABLE T_KNVP WITH KEY PARVW = 'YQ'.
 IF SY-SUBRC EQ 0. "YQ exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YQ'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YQ'.
 T_DATA-ZPERNR = KNVP-PERNR.
 ELSE.
 READ TABLE T_KNVP WITH KEY PARVW = 'YF'.
 IF SY-SUBRC EQ 0. "YF exists in master data
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = 'YF'.
 ENDSELECT.
 T_DATA-ZPARVW = 'YF'.
 T_DATA-ZPERNR = KNVP-PERNR.
ENDIF.
ENDIF.
ENDIF.
 ELSE.
 NEWPF = 'YM'.
* Try to find new sales employee with partner function 'YM'
 CLEAR KNVP.
 SELECT * FROM KNVP UP TO 1 ROWS
 WHERE KUNNR = T_DATA-KUNNR
 AND VKORG = T_DATA-VKORG
 AND PARVW = NEWPF.
 ENDSELECT.
 T_DATA-ZPARVW = NEWPF.
 T_DATA-ZPERNR = KNVP-PERNR.
 ENDIF.
 MODIFY T_DATA INDEX ZIDX TRANSPORTING ZPARVW ZPERNR.
 ENDLOOP.
thanks
Edited by: Bhat Vaidya on Aug 30, 2010 1:31 PM

RECOVERY LOOP: (Error Code:0xc0000185) PC doesn't load my operating system windows 8.

Hello,
About 3 weeks ago my just over a year new laptop took a fall onto the carpet from 4 feet above... my screen was cracked so I ordered a new one and put it in yesterday. Now, I am having problems. I start up my laptop, the HP logo with a timer circle is spinning below it, then it says " your Pc ran into a problem and needs to restart", it restarts and then it says, " Recovery- Your PC couldn't start properly. A required device isn't connected or can't be accessed. Error Code: 0xc0000185." With a bunch of other stuff written below it.. I have tried all the prompts possible. I did do a HP PC HARDWARE DIAGNOSTIC UEFI test, both the short and extended one. It says FAILED - Failure ID: GLXS3H-6MF76S-MFPWWJ-60S603, with the Product ID: C5E40UA#ABA then right below HARD DRIVE 1.
My lap top will not go into the windows screen now at all. I am guessing the fall my lap top took did some damage to the hard drive and that is the internal problem now. I did look at a video on how to take the hard drive out and I did unplug, remove battery, and take it out and took the controller board off, check to make sure nothing was lose or broken, and put back together and reinserted it into my laptop and I am still having the same loop as above happening.
INFO about my laptop:
-HP Pavilion G7-2247us Notebook 17.3"
-Windows 8
-750 GB Hard Drive
If you need any other information let me know and I will send it your way. I appreciate any help you give in advance.
Thank you,
Rachel H.
Washington State

Hello rh2014,
I have read your post on how you are not able to boot into Windows after replacing your notebook's display screen, and I would be happy to guide you towards a resolution!
Based on the information you have provided in your post, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Any possible way to fix error code 28? Restore doesn't work and my ipod won't turn on.

One day my ipod just wouldn't turn on and from then on it has been a total black out. I have plugged it into iTunes and it has notified me that the ipod is in recovery mode. I tried to restore the iPod but right at the end it brings up the error code of 28.
I don't want to fork out a lot of money for a new ipod, so if anybody could help me that would be great. Please share your knowledge if you have experienced this and know how to fix it, your help would be great. Thanks!

Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Note it could be a hardware problem If you can't get it to work an appointment at the Genius Bar of an Apple store is in order.

Error in loading Target table doesn't exist in target schema

I am having the following error to load data to the target
table: Connection failed to HR_TGT.orders ora-000942.
'Table or view does not exist'
The table exists and the odi super user has all the priviliges
over tables in HR_TGT.
What could be wrong with my configuration

I am using the original Oracle Integration KM.
My Replicat doesn't start any longer
Here are my configuration files
Source Files
ODISC.prm
extract ODISC
userid OGATE, password OGATE
exttrail C:\GGSRC/dirdat/ODISoc/oc
TABLE HR_SRC.ORDER_LINES;
ODISD.prm
defsfile C:\GGSRC/dirdef/ODISC.def, purge
userid OGATE, password OGATE
TABLE
HR_SRC.ORDER_LINES;
Target Files
C:\ggstg\diroby\ODIT1T.oby
dblogin userid OGATE, password OGATE
add checkpointtable ODIW.ODIOGGCKPT
add replicat ODIT1A1, exttrail C:\GGSTG/dirdat/ODIT1op/op, checkpointtable ODIW.ODIOGGCKPT
stop replicat ODIT1A1
start replicat ODIT1A1
C:\ggstg\dirprm\ODIT1A1.prm
replicat ODIT1A1
userid OGATE, password OGATE
discardfile C:\GGSTG/dirrpt/ODIT1.dsc,
purge
source defs C:\GGSTG/dirdef/ODISC.def
map HR_SRC.ORDER_LINES, TARGET HR_STG.ORDER_LINES, KEYCOLS (ORDER_ID, PRODUCT_ID);
map HR_SRC.ORDER_LINES, target ODIW.J$ORDER_LINES, KEYCOLS (ORDER_ID, PRODUCT_ID, WINDOW_ID), INSERTALLRECORDS, OVERRIDEDUPS,
COLMAP (
ORDER_ID = ORDER_ID,
PRODUCT_ID = PRODUCT_ID,
WINDOW_ID = @STRCAT(@GETENV("RECORD", "FILESEQNO"), @STRNUM(@GETENV("RECORD", "FILERBA"), RIGHTZERO, 10))
I have deleted the extract ODISC and ODIT1P as well as the checkpionttable ODIW.ODIOGGCKPT
Recreated the items.
I did same thing with the replicat ODIT1A1
The extracts had always started with little difficulties but the replicat once started but didn't transmit integrated data to
the target.
Now it is not starting at all.
I have deleted and recreate it but the same results

Sync error because of app that doesn't exist

Everytime I try to sync my iPhone 3Gs, I get an error that says...
There was a problem downloading the artwork for "Insert app name here".
Please try again by choosing "Check for Available Downloads" from the Store menu.
This app is not installed on my phone, it doesn't show up in iTunes on my app list, and it no longer exists in the App Store. I have OS 4.0 and my iTunes is updated. Because of this, I am completely unable to sync my phone and it is really getting annoying. Is there a folder or something I can get into to delete all traces of this app?

Contact itunes support & have them clear your download queue:
http://www.apple.com/support/itunes/

Error Checking File System that doesn't exist anymore [Solved]

I had been dual booting Arch and Ubuntu on my desktop and recently decided to ditch ubuntu and experiment with slackware. I also decided to take advantage of the reinstall to clean up my partition scheme.
The old:
sda1 ntfs windows
sda2 fat32 shared data
sdba5 swap
sdb1 ext3 Arch's root
sdb2 ext3 Arch's home
sdb3 reiser Ubuntu home
sdb4 logical partition
sdb5 reiser Ubuntu's home
sdb6 ext3 used to be shared /boot, but only Ubuntu had been using it since last Arch reinstall
The new
no changes to sda or Arch's partions
sdb3 ext3 Slackware root
sd4 ext3 Slackware home
Slackware is working fine, but when I try to boot up Arch I can only get to where it checks the filesystem, sdb1 and sdb2 check clean, then it tries to check sdb5 and obviously isn't finding this to be clean. When it drops me to the terminal I my old partitions and sdb4 are clean. sdb3 gives me an error saying it can find the reiser journal (don't have the exact wording but it obviously thought this should be a reiserFS not ext3) but if I do fsck.ext3 instead of just fsck it says it's clean.
It's probably relevant that my last few boots before the slackware install were complaing that my ubuntu partitions weren't clean, which kind of confused me since I didn't even mount those in Arch but I didn't bother fixing it since I was planning on reformatting them when I installed slackware and I could still boot into Arch unlike now. I'm wondering if Arch is still complaining about them not being clean from before I reformatted.
Can someone help me convince Arch to let me boot again?
Last edited by mcmillan (2007-08-07 16:23:54)

Have you changed fstab on Arch's root partition?
Use some LiveCD (even Arch's installation CD will do) to do so.

ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist... Help!

Some time ago my mac crashed and wouldn't startup. So my Son went into the windows side of it and he managed to repartition the harddrive leaving the one partition with loads of memory. It has been working perfectly fine up until now. It gets to 2% and then the installation fails. The only drives I have on my computer is a (C:) and (G:) so I don't know why this (D:) Keeps coming up and affecting the installation?

Ah i apologize for the lack of information, i was in a hurry so i forgot.
My system specs:
Sony VAIO, Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz, 4GB RAM , 64-Bit, NVIDIA GeForce GT 520M
I used to have an external HDD with all my work, files and softwares, which recently broke. It used to be recognized as D:/ so when I was trying to reinstall Photoshop that's where it was always sent to "Update" as I forgot it was registered as installed, after that I uninstalled the program and I thought that might fix it. So I tried re-installing, choosing a different location for the installation (Tried like 5 different folders.) and every time I get an error saying the same (Before I uninstalled Photoshop it said it was a critical error, now is a normal error.)
Also, the error pops up after it reaches 2%
http://i.imgur.com/gDSK4.png

ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.

I already changed the destination folder(SEVERAL TIME) but this keeps coming up, seriously whats the problem?

Ah i apologize for the lack of information, i was in a hurry so i forgot.
My system specs:
Sony VAIO, Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz, 4GB RAM , 64-Bit, NVIDIA GeForce GT 520M
I used to have an external HDD with all my work, files and softwares, which recently broke. It used to be recognized as D:/ so when I was trying to reinstall Photoshop that's where it was always sent to "Update" as I forgot it was registered as installed, after that I uninstalled the program and I thought that might fix it. So I tried re-installing, choosing a different location for the installation (Tried like 5 different folders.) and every time I get an error saying the same (Before I uninstalled Photoshop it said it was a critical error, now is a normal error.)
Also, the error pops up after it reaches 2%
http://i.imgur.com/gDSK4.png

Error Message: Disk Cache folder doesn't exist

I know this has already been asked, but I am aware that I HAVE deleted the disk cache folder by accident, and it is no longer in the recycle bin. Is there anywhere i can go to restore the Disk Cache folder, or redownload it? How does it affect me to work without it? Thanks

Just create a new folder and point to it in the preferences. It's as easy as that.
You could also delete your preferences, re-launch, and everything should be restored.

ERROR: DW041: INSTALLDIR Volume K:\ doesn't exist.

What can i do?
It come's everytime when the install is at 2%..:(

Do you have some type of custom configuration? What operating system are you using? Finally which Adobe software are you trying to install?

When creating po, pop up error message 'address doesn't exist'.

when creating po via me21n, when click delivery tab screen, pop up error message dialog box 'address doesn't exist T001 wsu20 00010'. message no is 'am010'. then i was forced to exit transaction.
ps: 'su20' is my plant, but in me21n, when selecting plant, i can see two 'su20', the diffrence is International address version. why there is two same plant

go into customizing and maintain an adress by clicking the envelope button in the detail to the plant. The adress in the customizing views itself is not sufficient.

Error code ws-36787-1 doesn't exist??? *****?

Similar Messages

Maybe you are looking for