Error Codes "2005" & Error Code "10"

Hi All,
I am posting m 1st discussion on this portal after somuch useless effort at my own end
I am using iPhone 3gs 16 GB newbottom with baseband 6.15.00. I was using it with ios 4.3.3 but unfortunately i get updated it with custom ios 5.0.1. My phone got succesfully restored but not activated. when phone setups it gives me error in itunes "Sim is not installed in iphone you are attempating to activate".
i am a new used to iphone so not clear about how to get my phone activated. then i restore my phone back to 4.3.3 but after restore it stuck up in DFU mode and never boot. I booted it threted with redsnow but doesnt start normally.
now when i again wanted to update it to latest ios in itunes 10.5.1, it gives me error code 2005 that was fixed by using itines 10.4.1. but in 10.4.1 i found another error code "10" that doesnt come in ituned version 10.5.1. now both itunes version have one error code. if i use 10.5.1 i got error code 2005 but in 10.4.1 i got error code 10.
please anybody help me out to get the solution mainly to restore to 4.3.3 and activating 5.0/5.0.1
hoping best reply

Hi,
I just 'GOOGLED' code 10 error and all seems sorted for you------so----away you go. Hope this helps. Just reassign the resourse i think.
Regards Jabiru

Similar Messages

SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

I Have problem in MS Update to HP PSC 500 in Window 8 OCT 2005 ERROR CODE 80070002

Without the update I can not see the printer name In the list of priner I print dialog. so I can not print . I see Psc Name only In the control panel
I also can not make a scan/ becuse the scanner has not been recognized by Windows 8 Cost. Prev.
the Update relise from Ms update is from Oct 2005. and I can instal It
The error code is 80070002

Here us some pretty good information about inkjet printer and Windows 8
Hope is explains things well enough,
GeorgeFN
GeorgeFN
I work on behalf of HP.

TS3694 Error codes 11, 2005, 1601 keep poping up when i try to restore my ipod touch 2nd gen.

Everytime i try to restore my ipod touch 2nd. gen. i get one of three error codes. (11,2005, 1601) I have done many things to help make it work and nothing has. Can anyone help me please also i have windows Xp

You found the answers, they are in the article which you posted your question from.
Go back there and read it... then do as it says to resolve the issues.

Mssql 2005 express SP4 upgrade fail with error code 1603

The patch install through windows update is fail, then I do it manually, SQL server Database Services setup failed.
Here is the setup log
Property(S): USERNAME = Windows User
Property(S): PackagecodeChanging = 1
Property(S): ProductToBeRegistered = 1
Property(S): ProductState = 5
Property(S): TRANSFORMS = :SqlRun01.mst;:InstID01.mst;:InstName01.mst
Property(S): PackageCode = {49616E1E-6C6B-4938-B811-352C355EFDCE}
Property(S): MsiLogFileLocation = C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_W2K8FS_SQL.log
Property(S): AdministratorsGroup = BUILTIN\Administrators
Property(S): UsersGroup = BUILTIN\Users
Property(S): ModuleID_SYSDB2 = 75D79626_87FB_4E9A_B07F_87DAE18D0F36
Property(S): TempFolder = C:\Users\admin\AppData\Local\Temp\
Property(S): WindowsFolder = C:\Windows\
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
MSI (s) (B0:F8) [11:55:54:332]: Note: 1: 1729
MSI (s) (B0:F8) [11:55:54:332]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
MSI (s) (B0:F8) [11:55:54:333]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.4.5000.00. Product Language: 1033. Reconfiguration success or error status: 1603.
MSI (s) (B0:F8) [11:55:54:355]: Deferring clean up of packages/files, if any exist
MSI (s) (B0:F8) [11:55:54:355]: MainEngineThread is returning 1603
MSI (s) (B0:40) [11:55:54:356]: RESTART MANAGER: Session closed.
MSI (s) (B0:40) [11:55:54:356]: No System Restore sequence number for this installation.
=== Logging stopped: 1/10/2012 11:55:54 ===
MSI (s) (B0:40) [11:55:54:358]: User policy value 'DisableRollback' is 0
MSI (s) (B0:40) [11:55:54:358]: Machine policy value 'DisableRollback' is 0
MSI (s) (B0:40) [11:55:54:358]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B0:40) [11:55:54:360]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B0:40) [11:55:54:360]: Restoring environment variables
MSI (s) (B0:40) [11:55:54:361]: Destroying RemoteAPI object.
MSI (s) (B0:AC) [11:55:54:361]: Custom Action Manager thread ending.
MSI (c) (04:88) [11:55:54:364]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (04:88) [11:55:54:366]: MainEngineThread is returning 1603
Please help.... Thanks~~

Thanks your quick reply,
As I checked before, the version is 9.3.4035
Please check the summary.txt
Microsoft SQL Server 2005 9.00.5000.00
==============================
OS Version : Service Pack 2 (Build 6002)
Time : Tue Jan 10 11:52:15 2012
w2k8fs : 64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Machine : w2k8fs
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLSupport_1.log
Machine : w2k8fs
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLNCLI_1.log
Machine : w2k8fs
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SqlWriter_1.log
Machine : w2k8fs
Product : SQL Server Database Services
Error : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Machine : w2k8fs
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.4.5000.00
Install : Failed
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQL.log
Last Action : SetInstanceProperty
Error String : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Error Number : 29528
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.

I keep getting this error for several websites: *An error occurred. Error Code: 2005 *Your connection to the server has closed. [Status Code: 1042] HOW CAN I FIX THIS?

I'll be in a forum on a website and be fine for like 2 minutes then it will boot me and give that error.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

Error MSB3073: The command exited with code -1

I am getting this error while deploying the biztalk project from visual studio using Deployment Framework for Biztalk (BTDF).
Please guide me what needs to be done. Here's the code :-
<?xml version="1.0" encoding="utf-8"?>

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Installer" ToolsVersion="4.0">
<PropertyGroup>
<Configuration Condition="'$(Configuration)' == ''">Debug</Configuration>
<Platform Condition="'$(Platform)' == ''">x86</Platform>
<SchemaVersion>1.0</SchemaVersion>
<ProjectName>HelloWorld</ProjectName>
<ProjectVersion>1.0</ProjectVersion>
<IncludeOrchestrations>False</IncludeOrchestrations>
<IncludeTransforms>False</IncludeTransforms>
<IncludeSSO>True</IncludeSSO>
<UsingMasterBindings>True</UsingMasterBindings>
<RequireXmlPreprocessDirectives>False</RequireXmlPreprocessDirectives>
<ApplyXmlEscape>True</ApplyXmlEscape>
<SkipIISReset>True</SkipIISReset>
</PropertyGroup>
<PropertyGroup>






<ProductVersion>1.0.0</ProductVersion>
<ProductId>084986b1-d675-4383-b0ed-da2e3f4e3998</ProductId>

<ProductName>HelloWorld for BizTalk</ProductName>
<Manufacturer>Deployment Framework User</Manufacturer>
<PackageDescription>HelloWorld</PackageDescription>
<PackageComments>HelloWorld</PackageComments>

<ProductUpgradeCode>4975288c-1b94-4d42-868b-f166cdc02224</ProductUpgradeCode>
</PropertyGroup>



<PropertyGroup Condition="'$(Configuration)' == 'Debug'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Debug\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Release'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Release\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Server'">
<DeploymentFrameworkTargetsPath>Framework\</DeploymentFrameworkTargetsPath>

<DeployPDBsToGac>true</DeployPDBsToGac>
</PropertyGroup>
<ItemGroup>
<PropsFromEnvSettings Include="SsoAppUserGroup;SsoAppAdminGroup" />
</ItemGroup>



<ItemGroup>
<Schemas Include="HelloWorld.dll">
<LocationPath>..\$(ProjectName)\bin\$(Configuration)</LocationPath>
</Schemas>
</ItemGroup>

<Import Project="$(DeploymentFrameworkTargetsPath)BizTalkDeploymentFramework.targets" />

<Target Name="CustomRedist">
</Target>
</Project>
Error :-
Starting build...
C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" /nologo /t:Deploy /p:Configuration=Debug
Build started 08-04-2015 17:43:51.
Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" on node 1 (Deploy target(s)).
SetModeDeploy:
DEPLOYING APPLICATION TO BIZTALK...
SetWinVer:
Running on Windows V62
Detected IIS 7
Detected 64-bit OS
GetSoftwarePaths:
Using .NET Framework Install Path 'C:\Windows\Microsoft.NET\Framework\v4.0.30319'.
Using BizTalk Install Path 'C:\Program Files (x86)\Microsoft BizTalk Server 2013\'.
Using Deployment Framework Install Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\'.
Using Deployment Framework Tools Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools'.
Using BizTalk ESB Toolkit Install Path 'C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\'.
ExportSettings:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\EnvironmentSettingsExporter.exe" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\SettingsFileGenerator.xml" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings"
Environment Settings Spreadsheet to XML Exporter 1.6.1
[http://EnvSettingsManager.codeplex.com]
Copyright (C) 2007-11 Thomas F. Abraham. All Rights Reserved.
Importing from SettingsFileGenerator.xml...
Output format is XmlPreprocess (multi-file).
Exporting to Exported_LocalSettings.xml...
Exporting to Exported_DevSettings.xml...
Exporting to Exported_TestSettings.xml...
Exporting to Exported_ProdSettings.xml...
Finished.
InitSettingsFilePath:
Using settings file C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml
SetPropertiesFromEnvironmentSettings:
Setting properties from environment settings file (C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml)
Setting property to value 'BizTalk Application Users'.
Setting property to value 'BizTalk Server Administrators'.
InitializeAppName:
BizTalk Application Name is HelloWorld
PreprocessBindings:
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml' appears to be valid.
Clearing file attributes for 'PortBindings.xml'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\xmlpreprocess.exe" /v /c /noDirectives /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /d:CurDir="C:\BTDF\Walkthrough1" /s:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
XmlPreprocess v2.0.18.0
Copyright (c) 2004-2013 Loren M Halvorson
XML File Preprocessor
Settings XML file: "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
Preprocessing "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml"...
PortBindings.xml : Set the value 'HelloWorld' of 2 node(s) matching XPath '//ApplicationName'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\ElementTunnel.exe" /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /x:"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\adapterXPaths.txt" /encode+
Nested XML Encoder/Decoder v5.5.100.0
Copyright (C) 2005-2014 Scott Colestock, Tim Rayburn, Thomas F. Abraham
XML encodes/decodes content of element(s) by XPath. Applies escaping rules such
as > for '<'. Namespace decls, PIs, etc. of nested XML are not preserved.
XPaths : 16
Transformed Nodes : 0
Empty Nodes (skipped) : 3
No Transform Req'd (skipped) : 3
Total Matched Nodes : 6
Complete - output file has been saved.
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml' appears to be valid.
DeployFileAdapterPhysicalPaths:
Configuring FILE adapter physical paths from binding file PortBindings.xml...
Processing FILE adapter physical paths (Send)...
Setting up path 'C:\BTDF\Walkthrough1\Out'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
Processing FILE adapter physical paths (Receive)...
Setting up path 'C:\BTDF\Walkthrough1\In'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
TerminateServiceInstancesConditional:
Attempting to terminate all service instances for BizTalk app 'HelloWorld'...
Terminated 0 service instances for BizTalk app 'HelloWorld'.
VerifyBizTalkAppExists:
Checking for existence of BizTalk application 'HelloWorld'...
Did not find BizTalk application 'HelloWorld'.
DeployAppDefinition:
BTSTask.exe AddApp -ApplicationName:"HelloWorld" -Description:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding new BizTalk application "HelloWorld" to configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Added application "HelloWorld".
Command succeeded with 0 errors, 0 warnings.
UndeploySchemas:
Adding assembly name 'HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f' to item group.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /u "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Number of assemblies uninstalled = 0
Number of failures = 0
DeploySchemas:
BTSTask.exe AddResource -Type:BizTalkAssembly -Source:"..\HelloWorld\bin\Debug\HelloWorld.dll" -ApplicationName:"HelloWorld" -Options:GacOnAdd,GacOnImport,GacOnInstall
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to application "HelloWorld"...
Serialized BizTalk assembly "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f" from "..\HelloWorld\bin\Debug\HelloWorld.dll".
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to store.
Information: * Performing change request on type "System.BizTalk:BizTalkAssembly" (count=1)...
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deployed the following 1 BizTalk assemblies:
HelloWorld.dll
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkAssembly".
Command succeeded with 0 errors, 0 warnings.
DeploySharedAssemblies:
Deploying additional assemblies to GAC...
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /f /i "C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileReader.dll"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Assembly successfully added to the cache
Finished deploying additional assemblies to GAC.
ImportBindings:
Copying file from "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe AddResource -Type:BizTalkBinding -Overwrite -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") to application "HelloWorld"...
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Updating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") in store.
Information: * Performing change request on type "System.BizTalk:BizTalkBinding" (count=1)...
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkBinding".
Command succeeded with 0 errors, 0 warnings.
Deleting file "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe ImportBindings -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Importing bindings "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" into application "HelloWorld" in BizTalk configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Imported application "HelloWorld" bindings.
Command succeeded with 0 errors, 0 warnings.
DeploySSO:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"
Error persisting to SSO:
System.Runtime.InteropServices.COMException (0xC0002A18): The format of the account name is not valid. Domain accounts must include the domain name. Local accounts must not include a domain or computer name.
at Microsoft.BizTalk.SSOClient.Interop.ISSOAdmin.CreateApplication(String applicationName, String description, String contactInfo, String userGroupName, String adminGroupName, Int32 flags, Int32 numFields)
at SSOSettingsFileManager.SSOHelper.CreateApp(String appName, String userGroup, String adminGroup)
at SSOSettingsFileManager.SettingsFileImport.SaveSettingsToSSO(String affiliateAppName, String inSettings, String userGroupName, String adminGroupName)
at SSOSettingsFileManager.SettingsFileImport.Main(String[] args)
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Done Building Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target(s)) -- FAILED.
Build FAILED.
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySchemas target) ->
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySSO target) ->
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
1 Warning(s)
1 Error(s)
Time Elapsed 00:00:54.94

Hi Pratibha,
Thank you for posting in MSND forum.
Since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based
on your issue, since it is related to the Deployment Framework for Biztalk (BTDF), so I suggest you could consult this issue directly to this Deployment Framework for Biztalk (BTDF) website:
https://biztalkdeployment.codeplex.com/discussions , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CreateDesktop, ERROR CODE = 5, Access is denied. WTF!

2010-06-06 01:00:17,819 INFO [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-000-
Job ID for the submitted createPDF job =File.pdf409521-3f3c2f-479b06-b279af-1e90c4-144464
2010-06-06 01:00:17,944 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-024-File.pdf: Time Job Submitted: 6/6/10 1:00 AM for job = File.pdf409521-3f3c2f-479b06-b279af-1e90c4-144464
2010-06-06 01:00:17,946 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-017-File.pdf: Job Submitted by User: usersystemcontext
2010-06-06 01:00:17,947 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-016-File.pdf: Job Type: Convert to PDF
2010-06-06 01:00:17,954 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-022-File.pdf: Security Settings Used: No Security
2010-06-06 01:00:17,955 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-023-File.pdf: FileType Settings Used: Standard OCR
2010-06-06 01:00:18,131 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-06-06 01:00:18,154 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-021-File.pdf: PDF Settings Used: C:\Users\Administrator\AppData\Local\Temp\pdfg-Administrator\a4\d34d-f7fa82-0d461f-5bbe47 -ca5759-448964\pdfg PDFX1a 2001 1595459538722554337.joboptions
2010-06-06 01:00:18,260 INFO [com.adobe.service.ImpersonatedConnectionManager] Service Native2PDFSvc: Resource ProcessResource@4444eaad(name=pdfgen.exe,pid=0) acquired credential Administrator
2010-06-06 01:00:18,261 INFO [com.adobe.service.ProcessResource] BMC505: Service Native2PDFSvc: Starting native process with command line C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\svcnative\ServicesNatives2\bin\ProcessLauncher.exe Administrator - "C:\\Adobe\\Adobe LiveCycle ES2\\jboss\\server\\lc_turnkey\\svcnative\\Native2PDFSvc\\bin\\dll\\pdfgen.exe" PDF-NA8d6e70002 True -WinStaName WinSta0 -DeskName PDF-NA8d6e70002 -beginExecutable "C:\\Adobe\\Adobe LiveCycle ES2\\Java\\32bit\\jdk1.6.0_14\\bin\\javaw.exe" -endExecutable -Xmx64m -cp "C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-appmon.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-bslj.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-csa.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-generatepdf-client.jar;C:/A dobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-common-jaxb.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-common.jar;C:/Adobe/Ad obe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-commonbmc.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-idl-bmc-websphere.jar; C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-idl-bmc.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-utilities.jar;C:/Adobe/Adob e LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/avalon-framework-4.1.5.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/comfyj-2.4.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jacorb.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-api.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-impl.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-libs.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_acrobat1.1.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_autocad1.1.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_autocad2007.jar;C:/Adob e/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_excel1.3.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_pdfmapi1.0.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_project4.4.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_publisher1.0.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_visio4.a.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_word8.1.jar;C:/Adobe/Ad obe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniwrap-3.6.1.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/logkit-1.2.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/namespace.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/Native2PDFConverterServer.jar;C:/ Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/winpack-3.6.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/ServicesNatives2/jars/adobe-bslj.jar" com.adobe.native2pdf.bmc.Native2PDFConverterServer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ppServer jboss
2010-06-06 01:00:18,555 INFO [STDOUT]
ERROR: API        = CreateDesktop
2010-06-06 01:00:18,555 INFO [STDOUT]        ERROR CODE = 5
       MESSAGE    = Access is denied.
2010-06-06 01:00:18,563 WARN [com.adobe.service.ProcessResource] BMC024: Service Native2PDFSvc: Process ProcessResource@4444eaad(name=pdfgen.exe,pid=0) terminated abnormally with error code {3}
2010-06-06 01:00:18,565 INFO [com.adobe.service.ImpersonatedConnectionManager] Service Native2PDFSvc: Resource ProcessResource@4444eaad(name=pdfgen.exe,pid=0) returned credential Administrator
2010-06-06 01:00:18,576 INFO [com.adobe.service.ImpersonatedConnectionManager] Service Native2PDFSvc: Resource ProcessResource@7bac79bf(name=pdfgen.exe,pid=0) acquired credential Administrator
2010-06-06 01:00:18,578 INFO [com.adobe.service.ProcessResource] BMC505: Service Native2PDFSvc: Starting native process with command line C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\svcnative\ServicesNatives2\bin\ProcessLauncher.exe Administrator - "C:\\Adobe\\Adobe LiveCycle ES2\\jboss\\server\\lc_turnkey\\svcnative\\Native2PDFSvc\\bin\\dll\\pdfgen.exe" PDF-NA8d6e70002 True -WinStaName WinSta0 -DeskName PDF-NA8d6e70002 -beginExecutable "C:\\Adobe\\Adobe LiveCycle ES2\\Java\\32bit\\jdk1.6.0_14\\bin\\javaw.exe" -endExecutable -Xmx64m -cp "C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-appmon.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-bslj.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-csa.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-generatepdf-client.jar;C:/A dobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-common-jaxb.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-common.jar;C:/Adobe/Ad obe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-commonbmc.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-idl-bmc-websphere.jar; C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-idl-bmc.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-utilities.jar;C:/Adobe/Adob e LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/avalon-framework-4.1.5.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/comfyj-2.4.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jacorb.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-api.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-impl.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-libs.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_acrobat1.1.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_autocad1.1.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_autocad2007.jar;C:/Adob e/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_excel1.3.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_pdfmapi1.0.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_project4.4.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_publisher1.0.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_visio4.a.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_word8.1.jar;C:/Adobe/Ad obe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniwrap-3.6.1.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/logkit-1.2.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/namespace.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/Native2PDFConverterServer.jar;C:/ Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/winpack-3.6.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/ServicesNatives2/jars/adobe-bslj.jar" com.adobe.native2pdf.bmc.Native2PDFConverterServer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ppServer jboss
2010-06-06 01:00:18,623 INFO [STDOUT]
ERROR: API        = CreateDesktop
2010-06-06 01:00:18,623 INFO [STDOUT]        ERROR CODE = 5
       MESSAGE    = Access is denied.

LiveCycle ES2, Windows 7 ultimate 64bit, MS Office 2007, Acrobat 9.3.1
Category: PDF Generator
Service: GeneratePDFService
Service Operation: Create PDF
Jboss was started as Administrator.
User account was configured as "Administrator" as well in adminui-services-...
See the log for details. Pretty straightforward.
2010-06-06 01:28:15,843 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-024-f4f64c588fdbdacb777efdc01c5bd630: Time Job Submitted: 6/6/10 1:28 AM for job = f4f64c588fdbdacb777efdc01c5bd630a5082c-09b5a4-80a45e-0eda37-f7fbe9-657556
2010-06-06 01:28:15,844 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-017-f4f64c588fdbdacb777efdc01c5bd630: Job Submitted by User: usersystemcontext
2010-06-06 01:28:15,845 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-016-f4f64c588fdbdacb777efdc01c5bd630: Job Type: Convert to PDF
2010-06-06 01:28:15,855 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-022-f4f64c588fdbdacb777efdc01c5bd630: Security Settings Used: No Security
2010-06-06 01:28:15,855 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-023-f4f64c588fdbdacb777efdc01c5bd630: FileType Settings Used: Standard OCR
2010-06-06 01:28:15,874 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-06-06 01:28:15,896 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-021-f4f64c588fdbdacb777efdc01c5bd630: PDF Settings Used: C:\Users\Administrator\AppData\Local\Temp\pdfg-Administrator\d4\a182-08ad01-ab958a-034126 -9f5ff0-651238\pdfg PDFA1b 2005 CMYK 986406795791833381.joboptions
2010-06-06 01:28:15,905 INFO [com.adobe.service.ImpersonatedConnectionManager] Service Native2PDFSvc: Resource ProcessResource@35f8ca66(name=pdfgen.exe,pid=0) acquired credential Administrator
2010-06-06 01:28:15,906 INFO [com.adobe.service.ProcessResource] BMC505: Service Native2PDFSvc: Starting native process with command line C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\svcnative\ServicesNatives2\bin\ProcessLauncher.exe Administrator - "C:\\Adobe\\Adobe LiveCycle ES2\\jboss\\server\\lc_turnkey\\svcnative\\Native2PDFSvc\\bin\\dll\\pdfgen.exe" PDF-NA8d6e70002 True -WinStaName WinSta0 -DeskName PDF-NA8d6e70002 -beginExecutable "C:\\Adobe\\Adobe LiveCycle ES2\\Java\\32bit\\jdk1.6.0_14\\bin\\javaw.exe" -endExecutable -Xmx64m -cp "C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-appmon.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-bslj.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-csa.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-generatepdf-client.jar;C:/A dobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-common-jaxb.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-common.jar;C:/Adobe/Ad obe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-commonbmc.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-idl-bmc-websphere.jar; C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-pdfg-idl-bmc.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/adobe-utilities.jar;C:/Adobe/Adob e LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/avalon-framework-4.1.5.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/comfyj-2.4.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jacorb.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-api.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-impl.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jaxb-libs.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_acrobat1.1.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_autocad1.1.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_autocad2007.jar;C:/Adob e/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_excel1.3.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_pdfmapi1.0.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_project4.4.jar;C:/Adobe /Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_publisher1.0.jar;C:/Ado be/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_visio4.a.jar;C:/Adobe/A dobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniw2.9.5_word8.1.jar;C:/Adobe/Ad obe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/jniwrap-3.6.1.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/logkit-1.2.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/namespace.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/Native2PDFConverterServer.jar;C:/ Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/Native2PDFSvc/bin/winpack-3.6.jar;C:/Adobe/Adobe LiveCycle ES2/jboss/server/lc_turnkey/svcnative/ServicesNatives2/jars/adobe-bslj.jar" com.adobe.native2pdf.bmc.Native2PDFConverterServer -IOR IOR:000000000000002249444C3A636F6D2F61646F62652F736572766963652F4D616E616765723A312E30000 0000000000200000000000000F8000102000000000F3139322E3136382E31302E31303300000DC800000000001 9373737343632393433352F42522D31352F0100000000000000000000000000050000000000000008000000004 A414300000000010000001C0000000005010001000000010501000100010109000000010501000100000021000 0006400000000000000010000000000000024000000220000007E00000000000000010000000F3139322E31363 82E31302E31303300000DC90040000000000000000000000010040100080606678102010101000000000000000 00000000000000000000000000000002000000004000000000000001F000000040000000300000001000000200 0000000000000020000002000000004000000000000001F0000000400000003   -AppServer jboss
2010-06-06 01:28:16,141 INFO [STDOUT]
ERROR: API        = CreateDesktop
2010-06-06 01:28:16,141 INFO [STDOUT]        ERROR CODE = 5
       MESSAGE    = Access is denied.
"Access is denied?"!!! Come on, I am using Administrator.

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

At DI R3trans fails with this error code ORA-12545, but CI runs

Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'                        17 0.187511
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 12541                                    13 0.187524
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541)                                   14 0.187538
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 12541                                   14 0.187552
4 ETW000 [dev trc     ,00000]     ORA-12541: TNS:no listener
4 ETW000                                                                                22 0.187574
4 ETW000 [dblink      ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433]           14396 0.201970
4 ETW000 [dblink      ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433]                   39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris

@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web.

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

SSIS Package - An OLE DB error has occurred. Error code: 0x80040154.

I am getting below error when i try to execute a package
using batch file
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 7:15:29 AM
Progress: 2014-10-01 07:15:36.05
Source: Data Flow Task
Validating: 0% complete
End Progress
Error: 2014-10-01 07:15:36.05
Code: 0xC0202009
Source: ADTM001_UPDATE_COSTS_TIU0560 Connection manager "Excel
Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB
Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC020801C
Source: Data Flow Task Read Data From XLS [1]
Description: The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
Error: 2014-10-01 07:15:36.05
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "Read Data From XLS" (1) failed
validation and returned error code 0xC020801C.
I have tried to use 32 bit exe as well , But then i get below
error ,
Could not load package because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE
DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.). The SQL
statement that was issued has failed.

Hi Thanks for your reply, But the packages are already running under window authentication.
Please suggest something.The url you have given as reference does not solve my issue
I have tried to run 32 bit dtexec, I get below error'
Could
not load package because of error 0xC0014062.
Description:
The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.). The SQL statement that was issued has failed.

Quicktime Installation Failed: Error Code : -3

Whenever I try to install Quicktime 7.03 and iTunes for Windows, I always get this error. iTunes appears to install, but iTunes won't run. I really need to get quicktime installed. Someone PLEASE help me.

Yes, so helpful. Like we haven't been told the above solution many times over before and it DOES NOT WORK.
Called Apple today, apparently they don't even monitor the 'Apple Support Discussions' so we're only talking to each other, not Apple.
However, to call Apple support you need an i-pod serial number in order to recieve any support. I'll be calling back later today with a serial for them. After an hour of going round and round in circles (a manager even hung up on me) I was able to get someone to look through their knowledgebase for this problem. They pulled up the 'windows install cleanup utility' solution and nothing else. Said I'd need a serial no before they take it any further.
When they're pushing this software to replace things like Winamp, Windows Media Centre, and when non-ipod owners have issues and receive no support at all... is it really worth running I-Tunes?
Every other previous experience with Apple support has told me they're absolute retards. Like a warranty claim on a failed hard drive which lost its entire contents... apple service centre said it wasn't faulty. I guess Apple are keeping to old standards.
Here are some links to other threads describing the same problem... but remember, its not a major issure right?
Jacob Christiansen, "Quicktime Install Error", 03:17am Oct 25, 2005 CDT
Nick Brook, "Error 1904, error 46", 02:52pm Oct 12, 2005 CDT
Mark A Lizotte, "Errors during installation", 07:17pm Oct 25, 2005 CDT
jeremy brown5, "I can't install quicktime", 08:26pm Oct 25, 2005 CDT
Domenic Bussanich, "Error: -1612 The installation source for this product...", 08:08pm Oct 27, 2005 CDT
Tom Maynor, "reinstall quicktime on windows 2000...i want my itunes back!", 10:27am Oct 27, 2005 CDT
john Doe4, "Can't Install Quicktime", 02:26am Oct 25, 2005 CDT
Alan Butterworth1, "Quicktime errors -3, 1316 & 1603", 04:13pm Oct 24, 2005 CDT
http://discussions.info.apple.com/webx?128@@.68bbc4cc
shogunight, "Error Code: -3", 04:54am Oct 20, 2005 CDT

Error Codes "2005" & Error Code "10"

Similar Messages

Maybe you are looking for