Error Codes after Apple Hardware Test...

After someone here told me I've been experiencing kernel panics, I did some digging on the x lab site and re-ran the Apple hardware test in loop mode. after 17 runs, it returned the error:
4MOT/2/40000005:Right Side
I can't seem to find a list of error codes anywhere. My MBP has two 1GB RAM chips, both were pre-installed when I got the machine from Apple. I haven't tried switching them to see if the same error is returned on testing or with ONLY one or the other installed to see if this is truly a RAM issue. I thought I'd post to the forum for ideas first...

I'm afraid I have no idea. If you have AppleCare, I would ask them about the error code. You do have a different error code (/2/ not /1/ and different number after the second slash) than the link, so perhaps it is not a fan motor that is your problem, though I'm hard-pressed to think of what other motors the MBP has (I don't think the hard drive is on the right side, for one.) Alternatively I can imagine, since you said it took you 17 tests to get the result, that this is an intermitent problem--for all I know, just a slightly loose/poorly soldered wire--and so istat hasn't detected the problem yet.
I think AppleCare or a Mac Genius is your best bet, if you have the one or can get to the other. In particular, unfortunately, Apple does not seem to publish the hardware error codes; it only makes them available to techs.
Good luck!

Similar Messages

Error 4PRC in Apple Hardware Test

Hello,
I have a 24" iMac (2.16GHz Core Duo, 1.5GB RAM) from late 2006. A few days ago, the display went black although the power stayed on. I turned it off, and it hasn't been able to boot since then. Whether I try to boot normally, in safe mode, or from the install DVD, the same thing happens: (1) happy startup sound with gray Apple logo; (2) that screen darkens and *sort of* a kernel panic message appears in the center. I say "sort of" because the kernel panic message's rectangle is in the right place and some of its text is readable, but partway down the rectangle it looks as though the drawing is offset somehow. Anyway, that's how this problem manifests itself: a kernel panic very early in the boot process.
Miraculously, the Apple Hardware Test starts up successfully from the install DVD. Both the normal test and the extended test give the same result: the RAM passes its tests, but when it reaches the CPU, the following error message appears, and the tests stop:
4PRC/1/40000003: Processor
That looks bad. I searched the web and various forums (including this one) and found very little information. An Apple document marked "Error Codes, Apple Hardware Test version 3A117" suggests that the appropriate action is to replace the processor.
I suspect that if I take the iMac to my local Mac repair specialists, they will offer to expensively replace the motherboard. I'm an old UNIX nerd and have tinkered with lots of machines other than Macs; can I simply replace my iMac's CPU myself?
Or is CPU replacement in fact unnecessary, when some other fix might work? Does anyone have specific advice about this error message?

In case it's helpful, here's a textual description of the panic from single user mode startup (which fails just as badly):
hi mem tramps at 0xffe00000
PAE enabled
64 bit mode enabled
standard timeslicing quantum is 10000 us
vmpagebootstrap: 382549 free pages
migtable_maxdispl = 71
Enabling XMM register save/restore and SSE/SSE2 opcodes
84 prelinked modules
ACPI CA 20060421
AppleIntelCPUPowerManagement: ready
AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
using 7864 buffer headers and 4096 cluster IO buffer headers
Enabling XMM register save/restore and SSE/SSE2 opcodes
Started CPU 01
panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, C5å: 0x19d0010c, CR3: 0x0120f000, CR4: 0x000006e0
EAX: 0x037a9198, EBX: 0x037de760, ECX: 0x0041fa40, EDX: 0x037ffc80
CR2: 0x19d0010c, EBP: 0x1cfb3e58, ESI: 0x0378bdc0, EDI: 0x037602c0
EFL: 0x00010212, EIP: 0x19d0010c, CS: 0x00000008, DS: 0x00000010
Debugger called: <panic>
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x1cfb3c38 : 0x128d0d (0x3cc65c 0x1cfb3c5c 0x131f95 0x0)
0x1cfb3c78 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
0x1cfb3d88 : 0x19b3a4 (0x1cfb3da0 0x4b00d0 0x1cfb3dc8 0x4)
0x1cfb3e58 : 0x3c10b5 (0x37de760 0x378bdc0 0x1cfb3e88 0x389d2b)
0x1cfb3e88 : 0x38af5f (0x37de760 0x378bdc0 0x1cfb3eb8 0x38998b)
0x1cfb3eb8 : 0x38ed6e (0x3821f00 0x37602c0 0x37de764 0x3821f08)
0x1cfb3f38 : 0x38ebb5 (0x3821f00 0x37ffe40 0x0 0xffffffff)
0x1cfb3f88 : 0x3902fa (0x3821f00 0x0 0x134db9 0x390228)
0x1cfb3fc8 : 0x19b21c (0x380dd50 0x0 0x19e0b5 0x375c3b4) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386

-3403D error when attempting Apple Hardware Test

Hi everyone,
I want to perform an Apple Hardware Test. I restarted, pressed option+D, and a globe appeared. After a minute, however, the following text appeared:
Apple.com/support
-3403D

Your Macbook Pro came with OS X 10.6.x and to run Apple Hardware Test you can use bundled with your Macbook Pro Application Disc:
Using Apple Hardware Test - Apple Support
Your Macbook Pro probably was upgraded to use OS X Internet Recovery as some of the Mac which came with 10.6.x did have that option. It seems like, some of the models might have problem to access Internet AHT:
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
About the "Apple Hardware Test does not support this machine" message - Apple Support
Not sure what error -340D means but if you haven't tried yet, i would suggest to turn OFF your router and after 2-3 mins turn ON again. Try with different network as very often issues with starting Mac in Internet Recovery are caused by network settings. This could be the same issue...

Where do I find a list of error meanings for Apple Hardware Test?

I think My 27" mid 2011 iMac has a faulty thermostat on the ODD. I ran the Apple Hardware Test and the error message was 4M0T/4/40000002:ODD-0. Where can I learn what this error code actually means?

That error message means that there is a problem with the optical drive fan motor. I recommend you to make a backup of your files and take the Mac to an Apple Store or reseller in order to prevent any problem.
Here you can find a list of Apple Hardware Test messages -> http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tes ts-on-your-mac/

What does the error from my Apple Hardware Test mean?

I was doing some maintenance on my iMac G5 (Ambient Light Sensor) this past week and found that my Video RAM might be bad.
My first clue was that when I used the 'option' key on boot, one of the resulting screens was covered with vertical lines of about 1/16 of an inch.
My second clue was that after running the Apple Hardware Tests, iMac Version 2.5.1 (the one that came with my iMac's original 10.4 Tiger installation disks), I was told there was a Video RAM error, but am not sure if I copied it right because all the little vertical lines. Here is what the AHT reported:
** ERROR ** ** ERROR ** ** ERROR **
2ATI/1/4 113-xxxxx-117
** ERROR ** ** ERROR ** ** ERROR **
Does anyone know what all this means? When I run OS X my desktop doesn't appear to have any video problems, so I was taken be surprise.
Thanks.

Well I just wanted to chime in I know this is a little late, but I just picked up a iMac G5 for $50 that had this same problem, I would recommend you take the back cover off of the iMac and inspect the capacitors, I did and found a blown capacitor I took the logic board out took it to a local PC repair shop and for $35 he replaced the blown cap. They don't have to be completely blown to mess things up just domed or really anything other than flat. I came home put it back together and everything works great. just something to consider I mean for 30-50 bucks what could it hurt otherwise if no blown caps are visible then your video chip needs to be reseated and I don't know what to tell you on that.

Can anyone explain why I cannot restart my computer after apple hardware test with no problem found

Can any body help
when starting computer apple hardware test appears
following test, no problem found but cannot restart computer
apple hardware test appears again
How can i skip apple hardware test?

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Error code meaning in hardware test

I have had problems recently and finally discovered an error when running hardware test. Can anyone tell me what the error means - it is obviously a dimm memory problem but what else does it tell me?
error code = 2MEM/1/4:DIMM6/J43
THANKS
PAUL

You could try re-seating the RAM in J43 or removing the RAM (and the other stick of the pair), in the suspect slot J43 - the position of which is shown here.
Note that AHT is not always wizzo on RAM faults - there is some more advice here
http://thexlab.com/faqs/aht.html

Error Code 4MOT/1/40000003:HDD-1344. I got this code after running hardware testing, does anyone know what this means? Thanks

.

Buy a new drive and replace the old one. While the old one is still working (if it is) I would quickly make a bootable backup to an external drive if you have one, assuming you have no extant backup.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
You will find suitable replacement drives at OWC.
They may also have a video tutorial. Or you may find a written tutorial at ifixit.com. Also may find one by Googling for it.

Anyone Know what this apple hardware test error means?

Hi I've been experiencing some problems with my mac it gets to hot fans nerver go up not even with smc fan control installed and some times it freezes so i decided to run the apple hardware test that comes with the machine and during the memory part it showed me this error code
4MOT/1/40000003:HDD
Does any one know what this means or have any idea with what part of the machine it can be related to
Thanks hope sombody answers

If I had a hardware error detected by Apple Hardware Test (which in my experience misses the minor things) then I would be raising a case with AppleCare right away.
http://www.apple.com/support/contact/phone_contacts.html
You shouldn't have to deal with hardware failures on a Mac this young.
mrtotes

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

What does Apple Hardware Test error code 4MEM/1/40000000:OX3bb6b190 mean?

Mozilla kept crashing so I did the Apple Hardware Test and got error code 4MEM/1/40000000:OX3bb6b190. I reinstalled MacOs 10.4.4 (after saving the important stuff to disk of course) and it took about 10 tries to get the 2 disks installed. After the installation, I tried to update to 10.4.5, and when I restarted, the screen was blank. The only disk the computer will start with now is the No. 1 installation disk. What can I do?

Hi
A MEM error code generally indicates a faulty RAM Module. In my experience most RAM manufacturers offer at least a 5 year warranty of their RAM products. Some warranties are for 10 years. Sometimes reseating (taking it out and putting it back in again - properly) the Module will 'cure' the problem. Run AHT afterwards if you try this option first.
If you can remove the offending module and still have enough RAM to be able to do what you need to do then do so.
If not take it to your nearest Apple Repair Specialist who should fix it for you or replace the faulty module yourself and deal with the RAM manufacturer directly.
Judging by the footer to your post you don't seem to have had much luck with this model have you?
Tony

Apple Hardware Test Error Code " 2STH/1/2:CPU A AD7417AD1 "

Hi All,
I have a G5 2.5 GHz dual processer that seems to work fine after 14 months. But when I run the Apple Hardware Test, I get the error message listed in my subject above. I talked to Apple and took the machine in for service. Servicer said get the latest upgrade of the AHD and try it instead of one that came with my machine. After some work (a good bit), I got Apple to send me the upgrade and when I run it, I still get the same error code! Does anyone have any suggestions? I could sure use them. Thanks,
Chuck
Powermac G5 Mac OS X (10.3.9)
Powermac G5 Mac OS X (10.3.9)
Powermac G5 Mac OS X (10.3.9)
Powermac G5 Mac OS X (10.3.9)

Although you do not have any symptoms(?) the same error was cause for concern here
http://discussions.apple.com/thread.jspa?messageID=598444&#598444

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

The motor on the exhaust fan has failed or is failing.

MacBook won't boot after trying to repair with Disk Utility. Cannot boot in Safe Mode. Just powers down after about 5 minutes. Apple Hardware Test says error 4SNS/1/40000001:IG0C-0.265 But I cannot find anything on the net about it. MacBook 4,1 Intel.

Hello Everyone,
I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Any suggestions are welcome and appreciated.
Thank you for your time.

You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive.
THe 4SNS error is a sensor error. You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less. You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further.

Error Codes after Apple Hardware Test...

Similar Messages

Maybe you are looking for