Error codes and links appeared on my firefox window

I use mozilla firefox as my default search engin. After installing google chrome on my laptop "hope to get faster internet" for nothing, i've noticed there's alot of error codes and links all over my firefox window...etc. "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, Column 16086:<?xml version=....As because of this my videodownloader toolbar is not visible. Please i need help... Tazzwon

Marla,
Sounds like you hid the Menu bar. Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.
Anonymous,
Open the View > Toolbars menu and select what you want to see.

Similar Messages

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

Error code message not appearing

Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi ‏12 KB

Hi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi ‏13 KB

When synchig my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Oracle List of Error codes and messages

Hi,
In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?
Thanks

In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?I don't know where to get such a list, but for a start you could search the log for the words "Error" and "ORA-"

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

Problem Getting Error Code and Description in Alerts

We are having trouble getting the Error code and Error description in the Alerts and we're having trouble getting a alert for message mapping exceptions. I have read through the BLOGs and the help on SAP. I'm not sure it is something to do with the configuration or SP14. We did not have these problems with SP12 at our other customer XI implementations.
Background -
We have setup an "XI Alert" classification with three Alert categories -"XI_Mapping_Error", "XI_Adapter_Error", "XI_Runtime_Error".
For the "XI_Mapping_Error" alert category, we have setup a rule so that any Integration Engine Application Mapping.* Error code will create an alert. However, when we have a mapping error in XI which we can see in MONI, we do not get an alert. The checkbox for "Suppress Multiple Alerts of this Rule" is not selected. I am not sure why we're not getting the alert.
For the "XI_Adapter_Error" alert category, we have setup a rule so that any Adapter Engine * adapter type will create an alert. The alert gets created - however, some of the container variables do not get poulated in the email. We have defined Container variables pointing to the corresponding ABAP data dictionary elements - i have double checked these definitions.
Here is an alert email - the Error Code (SXMS_ERROR_CODE - SXMSERRTX) and Error Category (SXMS_ERROR_CAT - SXMSERRCAT) are not being extracted:
Alert ID: ##23896##
Error Code =
Error Category =
Message ID = 1506eab0-6125-11da-9ba2-00505685 Time = 14:26:12 Date = 29.11.2005
Sender Party =
Sender Service = BS_CPI
Sender Interface = MI_CPI_INV_RFC_REQ_ABS
Receiver Party =
Receiver Service = BS_CPI
Receiver Interface =
We are not able to figure out why the Alert framework is not working correctly. We are running XI 3.0 SP 14 on Win2K, SQL 2000.
Anyone encounter these problems? Any help would be appreciated.
Regards,
Jay Malla

>> There are some problems with SP 14 and the alert framework.
Very true! Join the team!
>> We applied Note 876546 which triggered certain alerts that were not getting triggered. However, we're not getting the Error code and Error Description in some of the alerts.
Jay, This note is specifically for a situation where the 'where did the error occur' set to No Restriction. I don't think anything else is included in this fix .01 to patch 0.9 of SPS 12 of XI 3.0!!!
My problem is that even the messageID variable is not getting replaced!!! In SP12 everything was perfect. After SP14, the errors are coming almost instantaneously to the inbox, but without any variable replacement.
Best of luck,
Kannan

I have a 1654 error code and is not listed....what do I do?

i have a 1654 error code and is not listed. what do I do?

Try disabling the Ask Toolbar extension.

How to find all ORA error code and the message in Oracle10g?

Does anyone knows how to list all ORA error code and message in SQL Plus or find a full list of ORA error code in documentation?

If you want ALL Oracle ORA error codes in single page or even downloadable (html or pdf format) then check following post.
http://www.oratraining.com/blog/2010/08/complete-list-of-all-oracle-ora-errors/
Regards,
Tushar
Edited by: oratraining on Aug 18, 2010 12:20 AM

Where can find Oracle error code and message?

Where can find Oracle error code and message?

http://otn.oracle.com/pls/db92/db92.to_toc?pathname=server.920%2Fa96525%2Ftoc.htm&remark=docindex
That would be the "Error Messages" manual.

Oracle Error Code and Message for Query Timeout

Hi,
I need to catch the oracle error code and message for query timeout.
I am using Oracle 9i and could not find any relevant error code/message
for query timeout in Oracle Error Messages.
If anyone has encountered such error messages, please let me know the
Oracle Code or Error message.
Thanks & Regards,
Kanjana

Fly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
HTH -- Mark D Powell --

HT203200 i want download video but error (-39) and (-50) appears i have tryied everythink u advised but didnt help

i cant download a video error (-39) and (-50) appears and dont allow to download and i have tryied everything you have adviced on ur site but it didnt help me

What does everything advised on the site mean, what device are you using, have you restarted it.

Error Code 8024200D while installing update KB3000850 for Windows 8.1

Error Code 8024200D while installing update KB3000850 for Windows 8.1
I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
Hi Michelle,
Thank you for posting your query in Microsoft Community.
I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
Is your computer connected to domain?
Which security software is installed in the computer?
Do you remember making any specific change in the computer prior to the issue?
This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
improvements.
Cause:
This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
check the status.
Method 1: Depending on the architecture of your
Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
All supported x86-based versions of Windows 8.1: [link] Download the package now.
All supported x64-based versions of Windows 8.1:
[link] Download the package now.
Restart is required.
Method 2:
If the issue still persists, run the Windows Update Troubleshooter and check the status.
Click to run
[link] Windows Update Troubleshooter
Also refer to:
[link] Troubleshoot problems with installing updates
Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
Regards,
Niranjan Manjhi
Dear Niranjan,
Thank you for your answer.
To answer your questions:
1) Yes, my laptop is connected to the domain,
2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
In your answer, you suggested 2 methods for resolving the problem.
I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
Potential Windows Update Database error detected Ox800F08F: Not fixed
Windows Update components must be repaired: Fixed
And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
Michelle
Hi Michelle,
Thank you for keeping us updated on the issue.
Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
Please post your question in the link TechNet Forums.
Regards,
Niranjan Manjhi

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Error codes and links appeared on my firefox window

Similar Messages

Maybe you are looking for