ERROR CODES REFERENCE for 8i??

Please refer me to where I can download oracle 8i database error reference. I searched OTN, saw a lot of documentation, but not for error codes. Such useful thing and it's so hard to find!
Thank you!

http://tahiti.oracle.com also has all the Oracle documentation online, including the error reference.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

I have upgraded my iphone 4 (ios 4.3.5 to current release 5.0.1) yesterday and got an error code 1630 for carrier up-gradation failure. Now my device is not working for phoning purpose. It just stay muted at the time of call.

I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
and think it was the biggest mistake I have ever done.
Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
and even the the receiver also can't here my voice. calling other and after receiving by them and to be
mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
I do now?
Please help me.
I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194

Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
Thank you,
tjr

Try following the steps outlined in this blog post:
http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

Error code 499 for download music

error code 499 for itune music download all other music is ok.thanks

Hello, holebung.
Thank you for visiting Apple Support Communities.
Here are the troubleshooting steps that I would recommend going through when receiving error 499.
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
iTunes: Advanced iTunes Store troubleshooting
https://support.apple.com/kb/TS3297
Cheers,
Jason H.

Is there a range of error codes reserved for user defined error codes?

I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
Samee thing for warnings (errorcode > 0)
Thanks

I have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
User Interface Library
Easy I/O instrument driver
Toolbox instrument driver
ActiveX Library
DIAdem Connectivity Library
.NET Library
DataSocket instrument driver
Network Variable Library
Real-Time Utility Library
TDM Streaming Library
UDP Support Library
This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Import Error (Partial Set failure with RC error code = 0x84020020 for rec

Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep Kumar

HI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep

QuickTime Error Code Reference

Well, everything was working good. I seem to keep getting a QuickTime Error Code -120 now with every time I try to compress something. Is there a reference guide I might go to, to find what this means?

I believe this particular error was related to a bad driver for my Matrox Compress HD card. (FYI to anyone else out there, you need 1.6 for Leopard, 1.8 for SL). It still would be nice to know if there is a reference for the QT error codes.

Error Code 54 for Windows 8

I'm trying to get my library completed for my IPhone 5 but I keep getting error (-54) on my computer. I'm running ITunes through Windows 8. If anyone has anyway to fix this step-by-step please help it's getting very irritating when I see ITunes acting like this.

== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

Installing photoshop cs4 on an iMac and getting the error code licensing for this product has stopped working. what do i do?

have cs4 on a disk and installing on a new computer with no disk drive. dragged application file onto a stick and transferred to the new computer. but am getting this error code when i try to open. any ideas? thanks for the help

Hello,
what do you think about download a PS trial version, install it and then use your SerialNumber to active it.
You could use http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html AND note the: "Very Important Instructions" mentioned there.
Hans-Günter

Installation of Updates for Photoshop CS6 failed. Error code U44M1U5 for Camera Raw and U44M1P210 for Adobe Application Manager

The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5

You go Photoshop CS6 > Help > Updates ...

Error Code Definition for JDBC Thin driver

Would like to know where I can find the definition of error codes
for JDBC thin driver to Oracle 7 database. Right now, when I have
database errors, I get SQL execption with CODE=XXXXXX. Need to
know the definition of the error codes in order to decide whether
the application shall retry or quit or do something else. Thank
you in advance.
null

Hi,
thin client session Language is controlled by java Locale.
Based on testing code, ORA- messages are localized after the connection is successfully established. ORA- messages returned in the middle of connecting are in instance language.
So, as far as I can say, you need to catch exceptions from DriverManager.getConnection(url, info); and translate them on your own.
Once the connection is successfully returned, ORA- message language is defined by java Locale.
Tests were performed on Oracle 10gR2 (both thin driver and DB).

Timeout error (code 6101) for acquisition from MODBUS instrument

I am experiencing a problem which other users have reported, but for which little useful information has been posted:
I am trying to acquire data from an instrument using MODBUS RTU protocol. The code works as desired for a while, but will intermittently stop executing and give a timeout error, code 6101. This code seems to be associated with the MB Serial Master Query sub VI. In the past, I was getting this error as a result of RF noise corrupting the signal in the USB connection to the instrument. Removing the USB cable from the noisy environment eliminated the problem. I am now having the problem with an RS 485 line in the noisy environment, which should be very stable in noisy environemnts.
My question: is there a coding trick i can use to reconnect in the event that a corrupt signal occurrs (or some other problem which results in the intermittent appearence of the error 6101)?   I've increased the timeout value on the MB Serial Master Query sub vi, but this hasn't helped. Any input is appreciated. In case it's useful, I've posted a simple version of code which generates the problem.
Thanks,
Paul
Attachments:
Floating point 1.12.vi ‏24 KB
timeout error1.JPG ‏31 KB

Thanks for your input, Ravens Fan. I am indeed getting a popup error message with the timeout. I agree that putting the MODBUS read in its own loop would solve the problem. However, I'm struggling with trying to figure out how to actually do this.  Should I put the read in a case structure or a while loop? How do I go about looping back to re-execute the read statement? I think so called "state machine architecture" seems to be where I should be going. Some example code would be greatly appreciated.
paul

Error code 16 for windows7

i bought the cs6 web design premium student edtion. It worked fine on my vista set up. then i up graded to windows 7 and again all was well then about two months ago i started getting the error code 16. So i uninstalled it and reinstalled it with no luck. Did the walk through online about changing the SLStore and PCD folder options. Still no luck, i called tech support and he told me to look here so here i am.
intel core i7-3820 @3.60ghz
16 gb ram
64-bit OS windows 7 home premium service pack1
Geforce 580 video card
Creative suite is CS6 student edtion of the design and web premuim

Hi There,
Thanks for the information.
Kindly try the following steps.
1. Enable root user: Enabling and using the "root" user in Mac OS X - Apple Support
2. Try to launch it.
If you are able to launch it successfully in root.
3.Give read and write permission to everyone, and your username to below mentioned folders.
/Library/Application support/Adobe
~/Library/Application support/Adobe.
Utility/ Adobe Application Manger.
Utility/ Adobe Creative Cloud.
If it still persists, try to create another Admin user account and try to launch.
Please share the results.
Thanks,
Atul Saini

IM error code 500 for sprint centro

I have been receiving error code 500 "server is temporarily unavailable" for the past 2 days and I get it when attempting to log into yahoo or msn. I haven't been able to find a real solution for this anywhere and I'm hoping someone here can help. I've done a soft, warm and hard reset on my phone...deleted the IM program, attempted to reinstall it but was unable to do so (yet I still have access to the program) and I'm still receiving the same message. Any help is very appreciated.
Post relates to: Centro (Sprint)

I can't offer any help, but can commiserate a bit.
The IM app has been pretty flaky on my AT&T Centro. I'll see this error for several days, then it works fine.
I just logged into AIM and Yahoo with mine and it worked correctly today...?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I am receiving an "Unknown Error code (-3) for the song (Don't Fear) The Reaper when I try to convert to AAC format when I purchased it from itunes so if someone wants to help me out please feel free

I am receiving this error code on a song I purchased a few days ago and all i want is to listen to the song and itunes has been giving me more problems than i would wish to talk about lately so if someone could help me fix it that would be great if not i hope itunes and apple decide to fix it because it is ******** that a song i purchased from THEM doesn't work on THEIR service.

Q1-
3. Will the data on my iPod be preserved?
No. You will receive a replacement iPod that will not contain any of your data, songs, or after-market personalizations. Before you submit your iPod for service, it is your responsibility to keep a separate backup copy of the data stored on your iPod and reinstall that data.
From:
http://www.apple.com/support/ipod/service/faq/#warranty7
Q2- Updating iTunes should not change/delete your library. However, thisngs sometimes happen. You should have the computer files backed up
Q3- When you update an iOS, the first step is making a backup of the iPod. However, the backup does not include the apps themselves or music since those are always synced to the iPod from your iTunes library. You need to use a third-party program to copy the non-iTunes purchased music to your computer. That is the way it is.

ERROR CODES REFERENCE for 8i??

Similar Messages

Maybe you are looking for