Error codes when restoring ATV 2G

Hi
Arrrggghhh I'm about to go nuts.
Bought an ATV2 from a guy. I think it was jailbroken (I had mediacenter on it)?
Today it just shows connect to iTunes and so I did. Nothing happened but iTunes was able to see the ATV connected. Have tried to restore and update the whole day but lots of different errors occour (3194,21,16xx etc.)
Not possible to get it to work.
Anyone has an idea before I trhrow it into the sea?
Kind regards from Denmark

Seems I'm the only one posting on this thread. Oh, well...at least if someone else reads it they are getting some helpful information.
So today I removed a 5 port USB 2.0 card (aftermarket addition) and attempted sync. SUCCESS! No failures, no warnings, no issues, no problems. Previously, windows explorer had been slow to respont whenever the iPod had was connected to any port of that card. Not sure if any other external devices was affected, as I only occasionally use this card.
So the conclusion is that the USB card was faulty. If I remember correctly, it was about $15 from MicroCenter. Not a bargain afterall!
Cheers!

Similar Messages

How do I fix a 1611 error code when trying to restore my ipod?

How do I fix a 1611 error code when trying to restore my ipod touch?

Click here and follow the instructions.
(120576)

TS3694 3194 error code when i try a restore...what should i do

Please help with this problem...3194 error code when i try a restore...what should i do

You have the current version of iTunes on your computer, and you've tried the troubleshooting for that error code on this page (under the 'Unable to contact the iOS software update server gs.apple.com' section) ?

I am getting a "-50" error code when I try to sync. Help please.

What do I do to correct a "-50" error code when I try to sync?

Hi there patsea,
You may find the troubleshooting steps in the article below helpful.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different Dock Connector or Lightning Connector to USB cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
-Griff W.

HT201210 I am getting an error code when it's trying to verify the firmware of -1

I am getting an error code when it's trying to verify the firmware of -1 when trying to restore my IPHONE 4 using ITUNES and it's stuck in recovery mode and won't let me out now.
I have the ITUNES logo on the black screen with the USB cable?

Error -1 is a very bad hardware error of the baseband. Restore your iPhone on a different computer with iTunes 10.7 or 11. If on another computer you still get Error -1 then most likely there is no fix. If you have Warranty or AppleCare, make Genius reservation and take to Apple for resolution.

How can i fix a 4280 error code when trying to burn cd's on itunes

How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx.

I am getting this error code when trying to open an mpeg4 "OSStatus error -12909" anyone know why. Thanks

I am getting this error code when trying to open an mpeg4 file "OSStatus error -12909"
Has anyone had this happen to them.
I am new to the support community.
Thanks

Is this coming from a link, or from something you are trying to type in the address bar?
Try replacing the "html" at the start with "http",
so if you have html://somesite.edu,
change it to http://somesite.edu.

Error code when signing in to use face time; 3121-2138-7457 any ideas to the problem?

I recieve and error code when signing in to use facetime (3121-2138-7457) any information regarding how to correct this error code would be appreciated?

There is no official public documentation of that alert as far as I know.
If you're trying to sign in to FaceTime, try to sign in to iMessage in the Messages application, or vice versa.
Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative.

HT201210 i keep getting error 3194 when restoring ??

I keep getting error 3194 when restoring ipad help ???

From 2nd link below.
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1.    Install the latest version of iTunes.
    2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    4.    Try to restore from another known-good computer and network.
    5.    If the errors persist on another computer, the device may need service.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Error-code when launching Time Machine from MacBook Pro

I´ve get this error-code when launching Time Machine: An unaspected error has acourd (errorcode -6584)
Solution on this?

Sounds like OSX has lost track of where it is. Try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.
If that doesn't help, try repairing your backups, per #A5 there.

Receive an A12E1 Error Code when trying to update Photoshop CC. Running an iMac with 10.7.5. My OS Drive is formatted to Mac OS Extended (journaled). Any suggestions?

Receive an A12E1 Error Code when trying to update Photoshop CC. Running an iMac with 10.7.5. My OS Drive is formatted to Mac OS Extended (journaled). Any suggestions?

A12E1 download & install error http://forums.adobe.com/thread/1289484
-more A12E1 discussion http://forums.adobe.com/thread/1045283?tstart=0
Case sensitive https://forums.adobe.com/thread/1483096 may also help... or may not, I'm on Windows

I got this error code when I was updating camera raw in CS6 Error Code: U43M1D207.

I got this error code when iI was trying to update camera raw in CS6 U43M1D207

Have you tried to download and install directly from Adobe, instead of using the Updater in PS?
http://feedback.photoshop.com/photoshop_family/topics/camera_raw_6_6_update_fails_to_insta ll

TS3694 how do you solve a error 1015 when restoring a iphone from recovery mode?

how do you solve a error 1015 when restoring a iphone from recovery mode?

This error is generally exhibited when someone tries to downgrade iOS. See this support document http://support.apple.com/kb/TS3694
This is the part you are looking for.
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Error codes when installing elements 12

Hi all,
Who can help me with these errors. How can I make it right again. Very frustrating
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF006, DF014 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Elements 12 12.0.0.0 {48C6BCD3-4F00-4CFE-BDD4-8D57C640B985} -----------
ERROR: DF006: The path "/Applications/Adobe Photoshop Elements 12" already exists and is not a directory, Please rename or delete and retry(Seq 1)
ERROR: DF014: Unable to create symlink "/Applications/Adobe Photoshop Elements 12/Adobe Photoshop Elements 12"(Seq 1)
Thanks for the help
Denise

It has been installed bedore and then it suddenly did not work anymore. That's why tried to install it again, but unfortunatly did not work
Verstuurd vanaf mijn iPhone
Op 25 jun. 2014 om 22:14 heeft "Barbara B." <[email protected]> het volgende geschreven:
error codes when installing elements 12
created by Barbara B. in Photoshop Elements - View the full discussion
Did you try to install before without removing anything that did get installed from your applications folder before trying again? You don't have the installer files in the applications folder, do you?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6497038#6497038
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT5701 why do I get 3072 error code when trying to download 6.0.4

why do i get 3072 error code when trying ot download 6.0.4

Some details, please?
Based on the version number, you seeking to upgrade Safari?
What OS X version?
How are you upgraded or downloading the software? (Directly downloaded, or via Software Update?)
Have you tried quitting all applications, and then performing the Software Update? (Discussion per this thread — but that thread is for iTunes, and I'm guessing you're looking at Safari here?) If that doesn't work, I'd keep everything quit, reboot, and try again.

Error codes when restoring ATV 2G

Similar Messages

Maybe you are looking for