Error codes when trying to re-publish

I removed the page links and added hyper links to one page. Now when I try to re-publish I get error codes on things that worked fine before, and still work on the net.
I can't seem to add anything without getting error codes.
Anyone able to help?

I don't know exactly what they said b/c they are nolonger on my screen.  It said something to the effect of "incomplete dowload, there was an eror during the dowload of *Song*".
The songs purchased were showing in my purchased list with an "exclamation point" by them, which I believe indicates the download was incomplete.  I restarted iTunes and the songs are no longer on my "Purchased list".
I was still charged after restarting iTunes

Similar Messages

  • How can i fix a 4280 error code when trying to burn cd's on itunes

    How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

    Did you by chance find out a solution with your problem?     I am having the same issue with the same drive.    I even uninstalled iTunes and completely reinstalled it.
    Thank you for any help anyone can offer.    I'm not having any luck finding answers on the net.     Thx.

  • I am getting this error code when trying to open an mpeg4 "OSStatus error -12909" anyone know why. Thanks

    I am getting this error code when trying to open an mpeg4 file "OSStatus error -12909"
    Has anyone had this happen to them.
    I am new to the support community.
    Thanks

    Is this coming from a link, or from something you are trying to type in the address bar?
    Try replacing the "html" at the start with "http",
    so if you have html://somesite.edu,
    change it to http://somesite.edu.

  • How do I fix a 1611 error code when trying to restore my ipod?

    How do I fix a 1611 error code when trying to restore my ipod touch?

    Click here and follow the instructions.
    (120576)

  • Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    A12E1 download & install error http://forums.adobe.com/thread/1289484
    -more A12E1 discussion http://forums.adobe.com/thread/1045283?tstart=0
    Case sensitive https://forums.adobe.com/thread/1483096 may also help... or may not, I'm on Windows

  • HT5701 why do I get 3072 error code when trying to download 6.0.4

    why do i get 3072 error code when trying ot download 6.0.4

    Some details, please?
    Based on the version number, you seeking to upgrade Safari?
    What OS X version?
    How are you upgraded or downloading the software?   (Directly downloaded, or via Software Update?)
    Have you tried quitting all applications, and then performing the Software Update?   (Discussion per this thread — but that thread is for iTunes, and I'm guessing you're looking at Safari here?)  If that doesn't work, I'd keep everything quit, reboot, and try again.

  • Hello.  I am receiving "error codes" when trying to dowload songs.  It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online.  Help?

    Hello.  I am receiving "error codes" when trying to dowload songs.  It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online.  Help?

    I don't know exactly what they said b/c they are nolonger on my screen.  It said something to the effect of "incomplete dowload, there was an eror during the dowload of *Song*".
    The songs purchased were showing in my purchased list with an "exclamation point" by them, which I believe indicates the download was incomplete.  I restarted iTunes and the songs are no longer on my "Purchased list".
    I was still charged after restarting iTunes

  • I got an error code when trying to update Ph Shop CC   U44M1P7

    I got an error code when tryong to update Ph Shop CC    U44M1P7

    Try http://forums.adobe.com/message/5980657

  • Error Code when trying to burn from a burn folder

    Hey everyone,
    I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy. I was trying to burn some files onto a CD, it recognized the blank CD, displayed it in my finder as well as the burn icon, I had all the files set up, I hit burn, went to the speed selector, and then when I hit ok an error message popped up saying could not burn "Error Code 0x80020000). Any clue as to why that is? This is the first time I have had a problem burning files, both music and data have worked before.
    Thanks for the help.

    Hi, Joshua.
    I presume you are using the internal optical drive that shipped from the factory with your PowerBook G4.
    1. You wrote: "I am trying to clean up some space on my powerbook G4 (not that I need to) but I like to keep things tidy."Be careful not to "tidy up" anything outside of your Home folder or the Macintosh HD > Users > Shared folder. Your Home > Library folder is another folder that should not be altered unnecessarily.
    "Tidying" System files can render your Mac inoperable unless you either:
    • Have a deep understanding of Mac OS X and the files in question.
    • Are instructed to remove such a file by someone with such understanding.
    2. You wrote: "Error Code 0x80020000)"This is an "Internal Disc Recording" error.
    You may have selected too high a speed for the optical media or the optical drive, have bad media, or be using optical media that your optical drive cannot see correctly. Some new, high-speed media use dyes that are problematic with older Mac optical drives. See Macintosh: Factors That Affect Writing to or Reading From Optical Media. If you've not used this brand of media before, try a brand and speed of media that has worked in the past.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • I get this error code when trying to update from an older version of Firefox: The operation can't be completed because you don't have permission to access some of the items.

    While trying to upgrade from a previous version of Firefox, I get this error code: "The operation can’t be completed because you don’t have permission to access some of the items."
    == installing ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

  • Error Code when trying to burn cds

    Hi
    i have tried to burn cds using my iMac but for the last while i have been getting the same error , "burning of the disc failed because communication to the disc drive failed. Error code 0x80020022"
    this error appears if i try to burn music cds or data cds ( documents/photos etc. ) . i searched through all the forums but i can't find a solution. i have tried using disk utility to repair permissions etc. but it says there all fine. i have tried changing cd brands but it doesn't make a difference. i can't use the hardware test on my installation cd because it just spins in the cd and then spits the cd out and just starts as normal yet when i put in a cd it reads it and asks if i want to import it into iTunes. i downloaded Onyx and let it do its thing but that didn't fix it. i also went looking but i can't find a firmware update for the cd drive on my mac. the cd drive in my mac is a "MATSHITA CD-RW CW-8124" . I was wondering if this was a common problem and how do i go about fixing it. one person told me that the cd burner would probably need to be replaced in order to fix this problem is that correct and is that costly . i'm at a loss to what else i can try so i would be very thankful for any help or information you could give to help me get this back working again. Thanks a million
    Paul

    Hi there,
    I am writing here as an "end-user" and not as a professional computer advisor, and because I've had some problems alike with my older iMac. I've written about my case in here:http://discussions.apple.com/thread.jspa?threadID=1832474&tstart=0
    I would also like to know if there are some procedures to do in OS X (I have 10.3.9) regularly to make sure that the internal cd-rw-drive burns without "having it's own opinion" and giving all kind's of stuped error-signals or even throwing-out the cd-rw's when ordered to burn them.
    I haven't figured out if there is a straight way to do this in OS X with the original Apple-applications. However, I've found a 3rd party freeware application called Burn X Free (1.5 (v1.5)) which at the moment seems to work and do the job of burning cd-rw's. Earlier I was able to burn them in Finder, after going from OS X 10.2.8 to 10.3.9 I begun to have burnig-problems, but might be that the origin of the problems is not the X 10.3.9. Anyway, with my user short experience of Burn X Free (1.5 (v1.5))-application I can recommend it if nothing else after all maintenance procedures works...
    However, I would like to know how you solved the problem after all.

  • I get an error code when trying to install un update for my photosmart printer

    I have a Photosmart 5520 and I updated to a windows 8.1. When trying to install an update for my printer, I get an error code saying unable to update

    Hi cjrf,
    Thanks for the reply with the error code. I am going to post you a document below. Let me know if this works for you and I will continue to help if need be.
    Also, are you experiencing any issues with your Photosmart 5520? Are you unable to perform an action?
    Error code
    I hope this helps, good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I have this error code when trying to open my adobe illustrator cs5 213:11

    I have an error code of 213:11 when trying to open my Illustrator cs5

    Does this help? Google is your friend
    http://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html

  • Negative error code when trying to print from Linux OS

    What does a negative error code mean when trying to print from Linux OS.
    Terminated with error: REP-50157: Error while sending file to printer apps_dev. Exit with error code -1
    It is Oracle Application Server 9.0.4 on Redhat Linux when I'am directly sending the output to the printer.
    Thanks for the help in advace.
    -P

    Reinstall or update your Lexmark printer driver.

  • -77043 Error code when trying to enable contouring.

    Hello,
    I am currently trying to control a servo motor using a cRIO-9004 RT Controller and cRIO-9104 Chassis with an NI 9505 I/O Module. However, in my user interface loop, I get an error -77043 when I try to enable contouring in this code and this disallows me from causing motion using the contour data I input later on in the code. Does anyone have any idea how I can fix this?
    Thanks for any help. Sorry for lack of images, I am unable to upload.

    Hey rustawilliams,
     If you go to Help»Explain Error
    from within LabVIEW and type in that same error code you will see
    LabVIEW describe possible reasons for that error code as "NI
    SoftMotion:  The requested interval between contour points in the
    buffer is invalid." My first thought for the cause of this error to be
    the order in which you set up your contour move. What happens if you
    switch the order in which you enable your contouring and when you load
    your points; i.e. if you load your contouring points and then enable
    the contouring?
    Hope this helps.
    -Ben
    WaterlooLabs

Maybe you are looking for

  • Corruption in AVCHD play

    Whenever I import AVCHD from my Canon VIXIA HF-200 into PE12 it will play fine then for a few seconds it will pixelate and flash (corruption) for a few seconds then play okay again, in a five minute video it will do that 4 or 5 times and will render

  • I purchased my fcp but it's doesn't open all I have is the FCp quit unexpectedly what can I do to fix this

    I  purchased my fcp but it's doesn't open all I have is the FCp quit unexpectedly what can I do to fix this

  • Delete last record in plsql table

    TYPE r_LOOPElement IS RECORD (TermID   NUMBER TYPE t_LOOPType IS TABLE OF r_LOOPElement INDEX BY BINARY_INTEGER; i_CustomerLoop      t_LOOPType ; i_CustomerLoop(1).TermID=1; i_CustomerLoop(2).TermID=2; i_CustomerLoop(3).TermID=3;based on some conditi

  • How to setup material master classification?

    Hi Does anyone know how to setup a classification for material master ? We need create a new one for classification type ,area, and so on. In character , could it have dependence for each character? Thanks alice

  • Flowed layout and header display

    Hi, Is it possible to convert the attached pdf in the link to flowed subform without changing the layout of the elements and display the header only on odd pages? https://acrobat.com/#d=oKTODRKAg4lRMbAxz6HW6g Many thanks in advance.