Error: com.adobe.ProcessingException: Problem accessing d(200101)

When I run the transaction ooam to generate a PDF document i got the following error:
com.adobe.ProcessingException: Problem accessing d(200101)
Someone could help me?
Tks.
Erik Brison

Hi Andreas,
Firstly thanks for your help!
I checked the note 944221 and solved some problems, but when i tried to run the transaction again, i got the following error:
ADS: com.adobe.ProcessingException: Could not retrieve(200101)
Do you have any other ideia?
Erik Brison

Similar Messages

  • ADS-error: com.adobe.ProcessingException: Problem accessing d (200101)

    Hi Experts,
    On the ADS have been tested for 944221 without a note of paragraph 6 "Generated PDF with additional information". ADS is working locally.
    But on the another server occurs errors
    "ADS-error: com.adobe.ProcessingException: Problem accessing d (200101)"
    when printing on ADS server.
    On another server have been tests
    FP_TEST_00 - ok
    FP_PDF_TEST_00 - ok
    FP_CHECK_HTTP_DATA_TRANSFER with ADS -  false
    FP_CHECK_DESTINATION_SERVICE with ADS - ok
    FP_TEST_IA_01 - ok
    Edited by: Aidar Samigullin on Jul 27, 2010 1:47 PM

    http://www.google.com/search?q=ADS-error%3Acom.adobe.ProcessingException%3AProblemaccessingd+(200101&sourceid=ie7&rls=com.microsoft:cs:IE-SearchBox&ie=&oe=&redir_esc=&ei=sspOTP6lC4usOKnIjNIC

  • SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from De

    Hi SAP Guru,
    We have configured ADOBE for separate ABAP server and Java Server.
    But when I am execution report FP_TEST_00 getting below error
    ADS: com.adobe.ProcessingException: Problem accessing d(200101) Message no. FPRUNX001
    FP_CHECK_DESTINATION_SERVICE
    FP_CHECK_HTTP_DATA_TRANSFER giving error
    SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_IP1//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
    But report fp_pdf_test_00 is giving postive response.
    I have troubles hooted according to note 944221 , my configuration is ok but no success.
    Please help to resolve this issue.

    Hi,
    Check your ADS Connection .
    Do one thing
    Go to T-code "SM59"  -  "RFC Destinations (Display/Maintain)"
    select "HTTP Connections to External Server" - > ADS
    Double click there and check the all the settings " Administrations "  ,  Technical setting , Logon and security , Special option .
    Please check the log on and pass word with the help of your SAP BASIS consultant it will work fine .

  • ADS: com.adobe.ProcessingException: Problem accessing d(200101)

    Dear Expert,
    Please resolve my Problem....
    I Have made one Form, while testing I am getting Given Above Error, Whereas i have tested So many Standard Adobe Form and z adobe form but They are not giving any error, Please tell me where should i check For the error which is occuring only For my this adobe Form.
    Regards
    Shelly Malik

    Hi Shelly,
    Can you please share the solution for this issue??

  • ADS: com.adobe.ProcessingException: Problem accessing d(200101)...different

    Hello
    I searched and read a lot about this error and try to fix this but finally I got into unique situation....its like,
    various test for ADS works fine... like FP_TEST_00 , FP_PDF_TEST_00, destination test etc.. all works fine but when I create my own form and try to run this... I get this error. Even I just copied FP_TEST_00 into ZFP_TEST_00, just to make sure I'm not doing anything wrong in form development, it still give me this error.
    I dont know what should I do.. I dont have access to ADS settings..
    Anyone if have any idea how I can proceed to solve this, that will be greatly appreciated.
    Regards

    Hello Ajay,
    1. I guess you activated all three Interface, Form and program...
    2. I guess you checked FP_TEST_00 with tcode SA38...
    3. I guess you called your basis team to check if everything is O.K with the J2EE Server
    4. I guess you checked ADS is defined in T-CODE SM59 ...(Under HTTP Connections to External Server... ADS)
    Ajay,
    If one or more guesses is wrong then you have to check it...
    If the J2EE Server is down then you wont be able to activate your FORM .
    I hope this helps
    and if not... Sorry... i don't know how to help you on this one...
    Eran

  • Sytem Error:com.adobe.ProcessingException:Problem accesing data

    HI Experts,
    We are trying to perform ADS Configuration from ERP(DEV) system  to SOlman Java. One more thing is we already have ADS connection(GSD) from another ABAP system to Solman Java.
    In GSD,ADS is working fine but in DEV System(2nd ADS connection to Solman) we are getting below error when we execute FP_CHECK_DESTINATION SERVICE but we are able to execute FP_TEST_00 and FP_PDF_TEST_00 reports successfully.
    SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_DEV//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
    My question is:
    1.Is it possible to create 2 ADS connections to one Java System(in my case GSD,DEV ABAP systems trying to connect to Solman Java system via ADS)?
    2.If yes, please tell us how can we rectify the above issue we are facing.
    We didnt miss anythig from the config guide, thus we are able to config GSD perfectly.
    Thank in advance
    Rkumar

    Hi Sethu
    I rechecked roles and found the below roles assigned to the ADSUSER but not generated. i generated and executed the program FP_CHECK_DESTINATION_SERVICE and now ADS  setup is perfectly working fine.
    Z_ADS_SAP_BC_FP_ICF
    Z_ADS_SAP_BC_FPADS_ICF
    Z_ADS_SAP_BC_JSF_COMMUNICATION
    It was a mistake that i forgot to generate roles after copying from one system to another system.
    my problem is solved.
    Thank you

  • Com.adobe.processingException : Problem accessing data from destination

    hi guys,
    i have an ECC 6.0 server(db : sql) and i am getting the below error while testing the destination service
    (((com.adobe.processingException:Problem accessing data from destination
    dest: fp_icf_data_isp)))
    i checked rfc connection and it is working fine .
    i dont remember the ADS_AGENT password for checking the user.but i have provided all the required roles for that.
    please guide me to resolve this issue

    Hi
    When you say you checked the rfc are you refering to the one in SM59? The fp_icf_data_isp should be an entry in the visual admin of the server that runs the ADS. In the visual admin under server->services->destinations goto to the http folder and check that there is an entry with that name there. Also the address should be http://<host of abap system>:<abap http port> and the client field and username field should be filled in.
    Regards
    Thashin

  • Error "ADS: com.adobe.ProcessingException: X Exception - P(200101)"

    Hi folks,
    I created a new Adobe Interactive Form which is quite simple. There's just a header and the personal number of an employee to be printed. I binded a structure (contains 10 fields) to the context and de-activated all of the fields except  the field personel_number (defined as CHAR8).
    The form is ok when it's execuded by TA SFP.
    Running the form via a print program it aborts with "ADS: com.adobe.ProcessingException: X Exception - P(200101)".
    When I deactivate the personel_number in the context the form the error does not occur.
    The ADS works well. FP_CHK_REPORT and FP_PDF_TEST_00 report no problems.
    My problem is quite similar to [ADS: com.adobe.ProcessingException: com.adobe.Processin(200101); just the other way round.
    Regards,
    Steffen

    I fixed the problem on my own. There were probably 2 bugs:
    1. I deleted the form, the interface and the ddic objects. Then I started from scratch that means creating again ddic objects and the interface. When I created the form I recognized the layout type "standard form". I'm quite sure that this option was not selectable on form I deleted.
    2. It also could have been that the data structure of the context contained wrong data e.g. a numeric field contained non-numeric stuff (X'00')
    Maybe these informations are helpful for somebody.
    Regards,
    Steffen

  • Error ADS: com.adobe.ProcessingException:Could not retrieve(200101)getting

    Hi,
    In our development system CD2(ECC backend system) when I am acessing t-code PHAP_CATALOG_PA->Category Group/Category/Template>Zero Harm>DRA JKSW2>Preview --->Print Layout giving below error.Here PD7( Dev portal ) is acting as frontend.
    Error :
    ADS: com.adobe.ProcessingException: Could not retrieve(200101)
    Message no. FPRUNX001
    Diagnosis
    An error occurred when Adobe Document Services (ADS) was launched.
    System Response
    Error message
    Procedure
    When troubleshooting, follow the steps described in SAP Note 944221.
    First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
    Please help in this case.
    Regards
    Nilesh

    Hi,
    Perform the ADS configuration check as specified in : http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f0638873b56bede10000000a11466f/frameset.htm
    You need to check all the configuration steps to makesure everything is setup right. Also, try after restarting your Java engine where ADS is installed. Check your ADS RFC connection using SM59 tcode, and check whether ADSUSER and ADS_AGENT are not locked.
    Try and let know.
    Regards,
    Shahid.

  • ADS: com.adobe.ProcessingException:XMLFM Exception - T(200101)

    Hi ,
    we have two IDES.one is ECC5 & the other is ECC6.Again they access a
    common Java Instance for ADS.We have configure the ADS as per the
    standard documentation by SAP. ADS on ECC5 is working fine. But on ECC
    6 system, when we see the print preview for report FP_TEST_00 we get
    following error--
    Exception SYSTEM_ERROR
    Message ID: FPRUNX
    Message number : 001
    Message : ADS: com.adobe.ProcessingException:XMLFM Exception - T
    (200101)
    any usefull hints to solve this problem..thanks in advance

    1)when i execute FP_PDF_TEST_00 at se38 its run fine and shows that
    222bytes transferred
    2)when i execute FP_CHECK_DESTINATION_SERVICE AT SE38 without clicking the destination service connection-ADS  it works fine.But when i execute FP_CHECK_DESTINATION_SERVICE AT SE38  clicking the destination service connection-ADS  its shows the following error
    SYSTEM ERROR:com.adobe.ProcessException:Parser Configuration error while extracting properties from form template
    3)Again in search of the defaulttrace.trc i went to usr/sap/<SID>/<INSTANCE>/j2ee/cluster/server0/log/
    folder but i find so many defaulttrace.trc files.Like defaulttrace 1.trc, defaulttrace 11.trc,defaulttrace 13.trc etc.Could you plz tell me which .trc file i have to check & what to check???

  • ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)

    Hi,
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    Message:
    ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
    I am getting the above error while executing adobe forms function module.
    Any ideas.
    Regards,
    Thiyagu

    the J2EE User Management Engine has a configuration for setting an expiry date for passwords. Because of this setting, you can get an error after the password expires. (see documentation at http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/16c43bdd3da244a1d3372a77b5f83f/frameset.htm) This could be a reason here.
    Try this:
    Check the user ADSUser in the Visual Admin: -> Server -> Service -> Security provider -> UserManagement tab
    -> ADSUser
    Enter a password again and check 'No password change is required'.

  • ADS com.adobe.ProcessingException: CORBA Connectin to XMLForm failed

    When I run and fp_check_destination_service on one of my systems for ADS I am receving the following error:
    com.adobe.ProcessingException: CORBA Connectin to XMLForm failed, please verify the binaries are deployed to the os_libs directory.

    Hello. I think I faced the same problem. It concludes in following: pdf form created before upgrading SAP stoped working! I loaded it to the local PC, create a new one, load from PC into and miracle... it begins to work! It is about backward compatibility.

  • ADS: com.adobe.ProcessingException: Unable to load or c(200101)

    Hi,
    We configured ADS and it was working fine.
    Now it is giving me an error "ADS: com.adobe.ProcessingException: Unable to load or c(200101) "
    when i execute FP_TEST_00 program where as it is giving me the version info when i execute FP_PDF_TEST_00.
    All the settings are in place but it is giving me this error and am unable to get any solution for this.
    Please guide me with a solution.
    With Regards,
    Pradeep.B

    Dear Nelis,
    We saw the ADS trace file and we found that Operation properties file was missing.
    As we have moved to the new server, we copied the properties finle in the new server and the problem is solved.
    Thanks for your valuable suggestions.
    With Regards,
    Pradeep.B

  • System Error:ADS :com.adobe processingException:XMLFM Exception during render Exception

    Dear All, We have configured ADS in DEV and QAS it is working fine. We have done the same configuration in PRD but it is giving the following error when we execute the program FP_CHECK_DESTINATION_SERVICE: SYSTEM ERROR: ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE(200,101). Exception of class CX_FP_RUNTIME_INTERNAL System Info : SAP ECC EHP6 SAP NW 7.31 Kindly suggest some solution. Regards, Mustafa

    HI
    Note 944221 - Troubleshooting if problems occur in forms processing
    Note 717568 - FPRUNX001, 002 or 004 with output of PDF-based forms
    Note "959462 - ISR/Adobe/Web Dynpro Java: Configuration problems"
    Note 1288500 - HR-RU: ADS: XMLFM Exception-P(200101) message no.FPRUNX001
    Note 1143442 - Shift report: Error "ADS: XMLFM Exception"
    AND YOU CAN CHACK AGAINST FOLLOWING Problem:
    1). Check the JCO RFC from Java to ABAP server.
    2). Check the ADS connection in SM59.
    Check the document more troubleshooting steps
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?QuickLink=index&overridelayout=true
    http://forums.sdn.sap.com/thread.jspa?threadID=842415

  • Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException:

    Anyone every run into this error after saving a PO?
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    The full message is:
    System ID....   PR3
    Client.......   100
    User.........  ELBURGD
    Transaction..   ME21N
    Update key...   4EC42600E07900E1E10080000A14402B
    Generated....   17.11.2011, 06:09:20
    Completed....   17.11.2011, 06:09:24
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    Using SM13 it says:
    Function Module:  RV_MESSAGE_UPDATE
    Status:                  Update was Terminated
    Class:                   FPRUNX      Number: 001
    FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    This happens seemingly randomly in production after the user saves a PO.  They'll create a PO, save it, get the PO number , start a new PO and a message box pops up saying: 
    Express document 'Update was terminated' received from author 'xxxx xxxxx'
    If the user goes back to the PO to look it up, the PO does not exist.  If the user creates a new PO (or recreates the one that failed to commit to the database), it'll save with no trouble... same print settings, same everything.  This leads me to believe the problem isn't with the PO form but with the ADS.  The PO form is custom and works without error in dev and QA.  I do believe the users are setting the message options to Print Immediately.
    I am unable to recreate the problem in dev or QA, and it appears randomly in production.  I've run the ADS test programs in production and they come back without errors.
    Has anyone run into this before?  Are there some settings on the ADS that might need to be adjusted?  I don't think this is form related since we're able to recreate the same PO and save without error immediately afterwards, but could this be a form problem?
    I am open to any and all experiences you've encounted, and any suggestions you may have.
    Jeff Kulbeth

    Recently I had the same error with Adobe Form. In my case there were a few problems regarding data binding and data format. In a Form there was unresolved data binding warning and data format mismatch with one field - Form interface contained variable of type decimal and in the Form content that variable was bound to the field of type numeric with data format integer. Adobe Form with such kind of issues can be activated without errors but during Form call you get error FPRUNX001
    So my advice would be to consider things like:
    Resolve data binding warnings. Its in the Report palette witch by default is located in the bottom left corner of the vertical palettes bar.
    Check that Form interface data types match with Form content fields data formats in data binding sub-menu.
    Also in your Form calling application you can trace ADS by using these function modules:
    FP_GET_LAST_ADS_ERRSTR - provides texts about the cause of the error
    FP_GET_LAST_ADS_TRACE - provides a trace of the Adobe document services

Maybe you are looking for