ERROR: "com.sap.aii.af.ra.ms.api.ConfigException:"

Hi,
I am working on Idoc-xi-File scanerio.
I am facing an Error in TCode: SXMB_MONI
Error is
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: 
Please tell me,
How can solve this problem???
Please Reply soon......
Regards,
Umesh Laxkar

Hi Pooja,
Thanks.......
Now my scanerio is working.
Problem was CACHE Refresh.
This document really helpful.
Thanks again.
Regards,
Umesh Laxkar

Similar Messages

Avoid the error: com.sap.aii.af.ra.ms.api.ConfigException:

Hi!
I still facing with the authorization error in the message (section: call of adapter).
The error is:
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Unauthorized: J2EE AE rejected user. Reason: Principal propagation is not active, but technical IS service user was not used (J2EE_ADMIN).</SAP:AdditionalText>
When I looked into configuration I found that the j2ee_admin user will be used here (see. bellow).
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://bera9010:50400/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = j2ee_admin</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 3705</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
Questions:
What is the name of technical IS service user searching here? (PIISUSER)?
How can I change this settings?
Any helpful information will be very appreciated!
regards
Holger

What is the name of technical IS service user searching here? (PIISUSER)?
Yes
Check the configuration guide with SAP note 974873 to find if any setting is missing.
Regards,
Prateek

Experts needed! com.sap.aii.af.ra.ms.api.ConfigException

Hi everyone,
This error has taken away my two workdays now. When I activate any sender file adapter,
the audit log output is:
Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.
and it won't pick up any files. Please help!

Hi Fatih,
you could try the following :
check for SLD inconsistencies, e.g. is the Adapter Engine registered
[#764176 Error in XI due to inconsistent SLD contents|http://service.sap.com/sap/support/notes/764176]
If you are using a central SLD then check
=======
XI 3.0
[#720717 Reduce the number of System Landscape Directories|http://service.sap.com/sap/support/notes/720717]
PI 7.0
[#939592 PI Usage Configuration versus Central SLD|http://service.sap.com/sap/support/notes/939592]
Also use FQHN and ensure that the user
XIAFUSER/PIAFUSER
exists on the SLD and is defined correctly, i.e.,. the same as in the XI system, e.g. as a service user and not a dialog user
========
[#1031321 Self-Registration of Adapter Engine and RWB fails|http://service.sap.com/sap/support/notes/1031321]
Regards
Kenny

Error in Component monitering com.sap.aii.af.ra.ms.api.ConfigException:

Hi Experts,
In XI(Exchange Infrastructure) i am trying to test the scenario , that is from XI to R/3 via IDOC
using XI Runtime workbench Component Monetoring Adapter Engine and setting up all the parameters which are required but it is throwing the following error
Error while sending message: Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=SAP_XAPP_POC_GPD;TS=SAPR3_DE1_130;AN=ID1020_PurchaseOrderAccept_OB;ANS=http://com.sap.xapps/poc/collaboration;
I cleared the ACH cache and also activated all the objects i checked the receiver agreement twice to confirm the parameters but then it is throwing the error pls help me in this .
Thanks a lot in Advance .
Kelli.

Resolved in thread: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol ha

Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGR

Hi all,
I am currently doing a File --> RFC --> File synchronous interface ( I am not using RFC lookup functionality here ).
I am doing this scenario according to the following Wiki link,
[http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without+BPM)]
When testing the interface, i am getting an error "Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:" in the sender communication channel. I don't have any idea about this error, could anyone help me in this issue.
Cheers,
Sherin Jose P

Hi Sherin Jose P,
Please recheck your Integration Directory configuration for the scenario. Specially please check inbound interface determination settings. Here the communication channel is unable to find the interface mapping after receiving XML message. Did you use java mapping ? then please check the code again since it might not be producing exact target xml structure. Finally please ensure all mapping programs are existing and activated. If all mapping are activated then refresh the cache.
Please check in st22 transaction all errors in PI, whenever you get this message. There may be other reasons of error as well. There can be occasional short dumps due to data lengths or validations in ABAP programs. These short dumps in ERP may cause failures raised in PI.
Finally if there are some exception in mapping then this error you can expect.
Hope this helps.
regards
Anupam

Reason for com.sap.aii.af.ra.ms.api.ConfigException?

Hello all,
when trying to execute a synch Soap Request I get the resposnse message:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What does this error message mean? What do I have to do to dix this?
Thanks & regards,
Karsten

Thanks to all your replies.
The first SLDCHECK gave error for LCR_LIST_BUSINESS_SYSTEMS, but the second check showed the following (green) result:

Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_UNI
gateway host:
ld0508
gateway service: sapgw18
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: ld0508
port number: 51800
user : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
QPT_022
SIT_000
QXC_320
Q3I_940
Q75_003
CLIENT_410_EAR
EhP2USFED
(...more...)
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
Function call terminated sucessfully
Properties of own business system associated to system PSQ client 300
id = PSQ_300
role = LOC
Calling function LCR_GET_BS_DETAILS
Retrieving data from the SLD server...
Function call terminated sucessfully
Details of own business system PSQ_300
caption = PSQ_300
product =
IS-URL =
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_UNI
gateway host:
ld0508
gateway service: sapgw18
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
But again the response message:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any further hints?
Thanks & regards,
Karsten

XI messages failed with com.sap.aii.af.ra.ms.api.ConfigException

Hi forum experts,
A group of POs were sent at the same time, but once a while we get one PO failed with the below error. Could someone help me understand what the below error message mean. Your help would be greatly appreciated.
thanks,
Velvet
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Could not check current user (PIISUSER) against technical IS service user. Reason: Failed to read IS ServiceUser Id from EP. Reason: null</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
we are facing exactly the same problem. Where you able to solve it? And how?
Thanks.
S.Socratous

Error com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP res 404

Hi Friends,
In file to file scenario i am getting this error.
Transmitting the message to endpoint http://spcc-sappidev:50000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
When i see the msg in Message Detail Tool(Detail Display) I am able to see the right payload,but the file is not moving,and in audit log i can see the above mantioned error.
Want to confirm tht the endpoint in the above error should have java port or http port?
Also let me knw,what other things should i check.

hi brijesh
From SLD go the XI business system,check the check the role (IS) and the URL (the port should be HTTP PORT OF ABAP WAS)
finally restart j2ee engine from SMICM
regards
kummari

Error message "com.sap.aii.af.ra.ms.api.DeliveryException: "

Hi Team,
Created a simple file2file scenarion successfully. Unable to pick the file from Sender directory to Receiver Directory.
Checked from monitoring the Communication Channel.
Error message shown for sender communication channel as below:
Communication Channel Status   Short Log                                Control Data   Party Service           Adapter Type Direction
sen_cc                 Red ball Processing Errors In the Last 30 Seconds Manually             kanchuf2f_sen_bs   File         Sender
Line 1 / 1
By selecting the sender communication channel "sen_cc", below is the node details given.
Processing Details for Cluster Node Server 0 1_54295
Type
Time Stamp         Message ID                           Explanation
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Retry interval started. Length: 60.0 seconds
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
By clicking on the first Message ID, The message says successful upto some point and give error says JCO COMMUNICATION FAILURE and RFC issue.
Below is the information provided in detail.
Audit Log for Message: 45f841be-a421-43bd-235a-c7ad19b0aec8
Time Stamp          Status Description
03.12.2008 08:20:00 Success Channel sen_cc: Send binary file "f:\xi_file\sender\f2fmap.xml". Size 210 with QoS BE
03.12.2008 08:20:00 Success Application attempting to send an XI message synchronously using connection AFW.
03.12.2008 08:20:00 Success Trying to put the message into the call queue.
03.12.2008 08:20:00 Success Message successfully put into the queue.
03.12.2008 08:20:00 Success The message was successfully retrieved from the call queue.
03.12.2008 08:20:00 Success The message status set to DLNG.
03.12.2008 08:20:01 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error Transmitting the message using connection http://sitaserv33:8001/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error The message status set to FAIL.
03.12.2008 08:20:01 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
Page 1 / 2
I think this could be the problem with some basis related settings, I am not sure what exactly the issue with.
Any idea what exactly the error is talking about please do help me in finding the solution to thresolve this error message.
Regards,
Venkat Ramana K

Hi Carlos,
Thank you for the quick information.
Followed all the steps and also basis person from onsite restarted the XI server.
Now, I am able to log onto XI with the login Id but, when I give Tr Code: SXMB_IFR, unable to open the browser that shows Integration Builder.
Getting the error message.
*500   Internal Server Error*
                                                                                *SAP J2EE Engine/7.00*
**Exception**
*An internal error occurred. Contact you XI administrator*
*Unable to read configuration data (ExchangeProfile/aii.properties)*
Error Details, Error History, Build Info, Generic Application Info
Regards,
Venkat Ramana K

HTTP to RFC Mapping error:com.sap.aii.utilxi.misc.api.BaseRuntimeException:

hi all,
I am doin a http to rfc scenario.In moni it is showing a mapping error in the request mapping and showing this error.In IR my mapping is working fine but in payload runtime i found the error is because it is showing <?xml version="1.0" encoding="UTF-8" ?> twice.Below is the payload message
<?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Lspm_Request_SampledueGrid_MT xmlns:ns0="http://satyam.com/xi/LSPM">
<KUNNR>100000</KUNNR>
<FROM_DATE>15.11.2006</FROM_DATE>
<TO_DATE>10.12.2006</TO_DATE>
- <EQUIPMENTID>
- <item>
<EQUIPID>wb</EQUIPID>
</item>
</EQUIPMENTID>
+ <LOCATIONID>
- <item>
<LOCID>1</LOCID>
</item>
</LOCATIONID>
- <OILID>
- <item>
<OILID>BP260</OILID>
</item>
BP260
</OILID>
</ns0:Lspm_Request_SampledueGrid_MT>
I tested using view source code and removing the extra ]<?xml version="1.0" encoding="UTF-8" ?> in IR and it is working fine.
Now my problem is how to rectify this error can anyone help me out please??
thanks,
Nisheeta

hi,
I tried to post the XML in the http page without the header and now it it showing a new error
Result:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)</SAP:AdditionalText></SAP:Error>
http://cgnsap27:8000/sap/xi/adapter_plain?namespace=http%3A//satyam.com/xi/LSPM&interface=Lspm_SampledueGrid_Syn_MI&service=SATYAM_LSPM_BS&party=&agency=&scheme=&QOS=BE&sap-user=shailesh&sap-password=shailesh&sap-client=100&sap-language=EN
wat does this mean??
nisheeta

Error message com.sap.aii.af.ra.ms.api.DeliveryException: error while proce

hello experts
I am sending a message WS2RFC and recieve an error message that return from the RFC.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date '03042008' has a wrong format at field DATUM: Unparseable date: "03042008"</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
any ideas what it is and how to solve it?

Hi,
Looks like you have passed data in wrong format to RFC input parameter.
Your format: DDMMYYYY (03042008)
Expected: YYYYMMDD
I would use a graphical mapping function "DataTrans" to convert date format from DDMMYYYY to YYYYMMDD.
Regards,
Jakub

Com.sap.aii.af.ra.ms.api.DuplicateMessageException - Msg Successful

Hi all,
We have a scenario where JDBC sender adapter polls - DB2 data base.
Picks up the records. Updates the records.Messages are sent out.
Everything is fine. The message is sent to IE and then to the receiver.
But I see a com.sap.aii.af.ra.ms.api.DuplicateMessageException in the audit log.
2008-11-21 00:00:26 Error Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException:
Message ID 56149940-20b1-472f-0905-893a906a65cf(OUTBOUND) already exists in database:
com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: #XIR1N5J;000000030F.
2008-11-21 00:00:26 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DuplicateMessageException:
Message ID 56149940-20b1-472f-0905-893a906a65cf(OUTBOUND) already exists in database:
com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: #XIR1N5J;000000030F

HI
I think there is some issue with your query. Its either updating the same field or database got some error.
Check notes 962578 & 831162
Thanks
Gaurav

Call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException

hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
Kfir

Hi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta

"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryExceptio

Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
Anu

Hello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
 LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
 START_TIME = T_START_TIME
TABLES
 PRODUCT_SELECTION = T_PRODUCT_SELECTION
 LOCATION_SELECTION = T_LOCATION_SELECTION
 LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
 ORDER_HEADS = T_ORDER_HEADS
 OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu

Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableExcep

Hi,
I am generating IDoc for infotype 2006 through creating Change pointers using the Function Module 'CHANGE_POINTERS_CREATE_DIRECT'.
The problem is the Idoc is not reaching the receiver system. It is showing the below error message when i checked it in RWB Communication Channel Monitoring,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): com.microsoft.sqlserver.jdbc.SQLServerException: Warning: Fatal error 7987 occurred at Dec 17 2009 1:43PM( $ . Note the error and time, and contact your system administrator.
The scenario is Sender: Idoc and Receiver : JDBC adapters.
Please let me know how to solve this issue.
Thanks,
Sri

Hi,
From the error message: "Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): ". I think:
(a) If there is any data type mismatch like a character field from PI is trying to post into a date or numeric field in the stored procedure. You need to check if the data type of the fields in PI and the stored procedure are same?
(b) If there is any structure mismatch when the XML is created by BADI like any mandatory fields are missing.
Thanks,
Manohar Dubbaka

ERROR: "com.sap.aii.af.ra.ms.api.ConfigException:"

Similar Messages

Maybe you are looking for