Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException:

Good day,
I did a FILE-RFC-FILE scenario and my file sender adapter returns the error "Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId".
I got hold of blog with the similar error(JDBC - Sender adapter Weird Issue), with a suggestion to deactivate the comm. channels, do a full cache refresh and restart the comm. channels. I did all that but still getting the same error.
Your assistance will be higly appreciated.
Regards,
Charmaine

Hi,
Not very sure but this could be due to wrong configuration of CC or adapter may got locked.
Check for the same in Visual Admin under
Cluster Tab -
> Locking Adapter
If it has got locked then you can reset it here.
Regards,
Sarvesh

Similar Messages

Com.sap.aii.af.service.cpa.CPAException PI 7.1 HELP

Hi Experts,
While excecuting an synchronous scenario JDBC to RFC scenario i am getting Following error::
Error occurred while sending message (GUID 3ff964b6-8b9e-4518-27f8-c79f420e82bf): com.sap.aii.af.service.cpa.CPAException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEC1CLNT120;TS=EPMSDV;AN=ProductionOrderDetailsAmendment_SYNC_OB;ANS=http://al.ae/pi/Amend/100;
With referece to blogs i had seen SAP OSS note 741214 ,to refresh the CACHE but this note is only specific to SAP PI 7.0 But i need for 7.1
Please help if any steps or OSS NOTE for PI 7.1 Specific.
Thanks in advance......

Hello Mahesh,
I am facing the similar issue on our QA box. After using all possible solution, we had to get SAP involved for troubleshooting, they are still working on this. I have even implemented EAR files to check whether the CPA Cache refresh is really taking place or not.
I would suggest to do a full CPACache refresh and check if it's getting successful. This might help.
I don't think SAP has any patch to resolve this issue, else my problem would have been fixed long time back
regards,
Neetesh

ERROR: "com.sap.aii.af.ra.ms.api.ConfigException:"

Hi,
I am working on Idoc-xi-File scanerio.
I am facing an Error in TCode: SXMB_MONI
Error is
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: 
Please tell me,
How can solve this problem???
Please Reply soon......
Regards,
Umesh Laxkar

Hi Pooja,
Thanks.......
Now my scanerio is working.
Problem was CACHE Refresh.
This document really helpful.
Thanks again.
Regards,
Umesh Laxkar

Error in the following service com.sap.aii.af.ra.ms.impl.core.archiving.exe

Does anyone know what this error might be?
Details for 'Is the Adapter Engine running?'
==== Events on Server 19010950 ====
Adapter Engine, message: Fatal RecoverJob (Default Recover Job) failed.
(Details: Code: MS.JOB.RECOVER, Location: com.sap.aii.af.ra.ms.impl.core.archiving.executor.RecoverExecutor, Reason: java.lang.Exception: Failed to restart message ddc46f41-bdad-7cf1-b918-001b7832810c(INBOUND) remotely on cluster node 19011150. Reason: Could not execute cluster event, due to: Service"com.sap.aii.af.ms.svc"on cluster element 19,011,150 thrown an exception in receiveWait(), invoked by a request by cluster element 19,010,950., Time: 07.12.2008 10:00:00)
==== Events on Server 15965050 ====
Adapter Engine, message: Fatal Message listener localejbs/CIDXMessageListener could not be created for connection CIDXAdapter after 60 attempts.
(Details: Code: MS.APP.LISTENER.NOTFOUND, Location: com.sap.aii.af.ra.ms.runtime.ListenerFinder, Reason: Unknown, Time: 07.12.2008 08:34:49)
Adapter Engine, message: Fatal Message listener localejbs/RNIFMessageListener could not be created for connection RNIFAdapter after 60 attempts.
(Details: Code: MS.APP.LISTENER.NOTFOUND, Location: com.sap.aii.af.ra.ms.runtime.ListenerFinder, Reason: Unknown, Time: 07.12.2008 08:34:49)
Adapter Engine, message: Fatal Message listener localejbs/RNIF11MessageListener could not be created for connection RNIF11Adapter after 60 attempts.
(Details: Code: MS.APP.LISTENER.NOTFOUND, Location: com.sap.aii.af.ra.ms.runtime.ListenerFinder, Reason: Unknown, Time: 07.12.2008 08:34:49)
Reset event protocol:http://nytsappip.nyhq.nytint.com:50100/MessagingSystem/performance?resetSystemMatrixInCluster

Resolved in thread: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol ha

Error when attempting to get processing resources: com.sap.aii.af.service.

Dear All,
i am getting below error in RWB in receiver Channel
Error
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
Note: outbound has processed succesfully in both ABAP and Java Stack.

Hi,
Can you please let us know, which receiver adapter are you using??
I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
-Rahul

Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi Experts,
We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
Can anyone let me know how to fix the issue or what needs to be done?
Your help is highly appreciated.
Regards
Faisal

Hi,
It seems to be problem with permission of files. Please ask your basis to do following:
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards
Aashish Sinha

FPN error: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

Hi, all.
I am trying to initiate a webdynpro page from the producer to the consume portal via RDL. It works fine for a day. Then it starts giving me the error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page ...
This error cannot be cleared by clearning the FPN cache or synchronize with the producer. Of course, you can also delete the page from the consumer and copy it over from the producer again. It will work. But this is not a good workaround for a production system. We also don't know the cause either. Here is the stack trace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:528)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.portal.fpn.exception.unchecked.FpnUnMarshallingException: Could not find a marshaller for 'com.sapportals.portal.page' from path 'pcd:consumer_content/DEP/portal_content/ca.ottawa.sap.supportcentre/ca.city.ottawa.OttawaRoles/ca.city.ottawa.ManagerInfo/ca.city.ottawa.ManagerInfo-FinanceOnly/ca.city.ottawa.ManagerInfo_MSS_Finance/ca.city.ottawa.Mileage_Parking_Managers'
     at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:323)
     at com.sap.portal.fpn.entrypoint.RuntimeFederatedPersistance.retrieveDLRemoteState(RuntimeFederatedPersistance.java:103)
     at com.sap.portal.fpn.FpnRuntimeService.bringRemoteState(FpnRuntimeService.java:134)
     at com.sap.portal.fpn.FpnRuntimeService.doFpnLookup(FpnRuntimeService.java:97)
     at com.sap.portal.fpnprovider.fpn.GenericContext.lookup(GenericContext.java:49)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:526)
     ... 31 more
Caused by: com.sap.portal.pcm.OperationFailedException: Creating DL outside the PCD
     at com.sap.portal.pcm.iviewserver.CiViewSLObjectsManager.instantiateDescriptor(CiViewSLObjectsManager.java:687)
     at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:79)
     at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:71)
     at com.sap.portal.fpn.marshal.IViewMarshaller.instantiateRelatedItemDescriptor(IViewMarshaller.java:582)
     at com.sap.portal.fpn.marshal.IViewMarshaller.performSemanticActions(IViewMarshaller.java:506)
     at com.sap.portal.fpn.marshal.PageMarshaller.performSemanticActions(PageMarshaller.java:499)
     at com.sap.portal.fpn.marshal.IViewMarshaller.unmarshalResolvedDLChain(IViewMarshaller.java:715)
     at com.sap.portal.fpn.marshal.PageMarshaller.unmarshalResolvedDLChain(PageMarshaller.java:328)
     at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:320)
     ... 38 more
So far I found nothing on OSS or SDN on this FpnUnMarshallingException. Has anyone seen this error before?
Thanks.
Jonathan.
Edited by: Jonathan Ma on Apr 23, 2009 12:25 AM

Hi Jonathan,
you may deactivate the GPN cache as well as the old navigation cache. About the GPN there is note 1172433. Both caches are not used in FPN scenario and can lead to such strange problems. If this won't help please open a support message for this that we can analyse further.
Cheers,
Anja

File to File-CC 'error com.sap.aii.adapter.file.ftp.FTPEx: 550 Access deni'

Hi friend,
I am doing file to file scenario in which i wan to move one file from input folder to output folder.
I had created as FTP on one system that i am able to access and have full authorization to read and write.
and created that two input and output folder in it,n kept an xml file in input folder.
When i see sender communication channel in RWB it is showing error, "com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied'
I checked password,it correct also I tried to test it using Anonymous Login, but the same things.
SO i am not sure where i had done mistake.
Plz give ur suggestions.
Thanks

Hi,
Please Check below few steps:
Check if the username and the Password is created to write the file in the desired directory.
Check the username is provided the authorization to write the file in the desired directory. ... IS Guys will help you..
Confirm if the directory created have all the authorization to write the file.
ls - lrt
chmod 777 Directory Name
all the authorization will then be provided
Confirm if the directory is created with the root id then it there might be some problem with the user name u r trying to create..
Hope this will help.
Assign points for helpful answer..
Thanks
JAY.

Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGR

Hi all,
I am currently doing a File --> RFC --> File synchronous interface ( I am not using RFC lookup functionality here ).
I am doing this scenario according to the following Wiki link,
[http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without+BPM)]
When testing the interface, i am getting an error "Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:" in the sender communication channel. I don't have any idea about this error, could anyone help me in this issue.
Cheers,
Sherin Jose P

Hi Sherin Jose P,
Please recheck your Integration Directory configuration for the scenario. Specially please check inbound interface determination settings. Here the communication channel is unable to find the interface mapping after receiving XML message. Did you use java mapping ? then please check the code again since it might not be producing exact target xml structure. Finally please ensure all mapping programs are existing and activated. If all mapping are activated then refresh the cache.
Please check in st22 transaction all errors in PI, whenever you get this message. There may be other reasons of error as well. There can be occasional short dumps due to data lengths or validations in ABAP programs. These short dumps in ERP may cause failures raised in PI.
Finally if there are some exception in mapping then this error you can expect.
Hope this helps.
regards
Anupam

Error com.sap.aii.af.sdk.xi.util.URI$MalformedURIException: no scheme

Hi,
I am registering the following error in a SOAP Sender Communication Channel, it's very strange because of in the Development Environment everything worked fine.
com.sap.aii.af.sdk.xi.util.URI$MalformedURIException: no scheme
The Scenario is the following:
Sender: SOAP
Receiver: ABAP Proxy (Using the XI configuration)
I configured all the scenario to use only the Adapter Engine instead the Integration Server and, as I explained in the previous paragraph it worked fine in Development environment.
Does anybody know what could be going on?
Thank a lot for your help.
Kind Regards,
Victoria

Hello Victoria,
Can you please check if the inbound address for SOAP messages should be as follow.Other wise you will exceptions.
: http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
Under
party:service:channelenter the party name, the service name, and the
name of the communication channel. If no party has been created, enter the
following: channel=:service:channel
Kind Regards
Praveen Reddy

ERROR- com.sap.aii.utilxi.misc.api.BaseRuntimeException

Hi All,
In mapping i used udf's. while testing the mapping i got runtime exception error as the following.i have refresh "SXI_CACHE" adn also executed the report "SAI_REFRESH_CACHE" but i am facing same problem. i used "DateTimeFormat" udf in this mappping. Please help me to solve this.
15:04:29 Start of test
Compilation of MM_EAST successful Method DateTimeFormat1$ with 2 arguments not found in class com.sap.xi.tf._MM_EAST_ com.sap.aii.utilxi.misc.api.BaseRuntimeException: Method DateTimeFormat1$ with 2 arguments not found in class com.sap.xi.tf._MM_EAST_ at com.sap.aii.mappingtool.tf3.AMappingProgram.getMethod(AMappingProgram.java:437) at com.sap.xi.tf._MM_EAST_.getMethod(_MM_EAST_.java:574) at com.sap.xi.tf._MM_EAST_.__CreateStructures(_MM_EAST_.java:247) at com.sap.aii.mappingtool.tf3.AMappingProgram.preStart(AMappingProgram.java:171) at com.sap.xi.tf._MM_EAST_.preStart(_MM_EAST_.java:583) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:332) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:259) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Method DateTimeFormat1$ with 2 arguments not found in class com.sap.xi.tf._MM_EAST_
15:04:33 End of test
regards
Peera

Hi Anand,
while testing the mapping in test tab i got this error. and also i came back to design tab adn check the queue that time i got same error adn also it is not showing the queue.
actually my scenario is RFC to file. in this, for one mapping condition i used DateTimeFormat    udf . i explained for what purpose i am using this udf.
in rfc i have a field through which Date adn time values are passed. First this udf get date vaule adn wait for time value after getting time value the udf do concat with both values adn then send to target field in format yyyy-MM-ddTHH:mm:ss.
i am giving javacode for DateTimeFormat adn classes which we are used for java code
import java.awt.Container;
import java.awt.TextComponent;
import java.awt.TextField;
import java.io.*;
public String dateTimeFormat(String a,String b,Container container)
            String dateTimeString = "";
            if (a.length() == 8 && b.length() == 6)
                  //Substrings for extracting date
                    String year = "";
                    String mon = "";
                    String day = "";
                    //Substrings for extracting time
                    String hour = "";
                    String min = "";
                    String sec = "";
                  //Extracting date into year , month and day
                    year = a.substring(0,4);
                    mon = a.substring(4,6);
                    day = a.substring(6,8);
                  //Extracting time into hour , minute and second
                    hour = b.substring(0, 2);
                    min = b.substring(2, 4);
                    sec = b.substring(4, 6);
                  //Now constructing final date time string
                    dateTimeString = year"-"mon"-"day"T"hour"-"min"-"sec;
            return dateTimeString;
Thanks adn regards
Peera

HTTP to RFC Mapping error:com.sap.aii.utilxi.misc.api.BaseRuntimeException:

hi all,
I am doin a http to rfc scenario.In moni it is showing a mapping error in the request mapping and showing this error.In IR my mapping is working fine but in payload runtime i found the error is because it is showing <?xml version="1.0" encoding="UTF-8" ?> twice.Below is the payload message
<?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Lspm_Request_SampledueGrid_MT xmlns:ns0="http://satyam.com/xi/LSPM">
<KUNNR>100000</KUNNR>
<FROM_DATE>15.11.2006</FROM_DATE>
<TO_DATE>10.12.2006</TO_DATE>
- <EQUIPMENTID>
- <item>
<EQUIPID>wb</EQUIPID>
</item>
</EQUIPMENTID>
+ <LOCATIONID>
- <item>
<LOCID>1</LOCID>
</item>
</LOCATIONID>
- <OILID>
- <item>
<OILID>BP260</OILID>
</item>
BP260
</OILID>
</ns0:Lspm_Request_SampledueGrid_MT>
I tested using view source code and removing the extra ]<?xml version="1.0" encoding="UTF-8" ?> in IR and it is working fine.
Now my problem is how to rectify this error can anyone help me out please??
thanks,
Nisheeta

hi,
I tried to post the XML in the http page without the header and now it it showing a new error
Result:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)</SAP:AdditionalText></SAP:Error>
http://cgnsap27:8000/sap/xi/adapter_plain?namespace=http%3A//satyam.com/xi/LSPM&interface=Lspm_SampledueGrid_Syn_MI&service=SATYAM_LSPM_BS&party=&agency=&scheme=&QOS=BE&sap-user=shailesh&sap-password=shailesh&sap-client=100&sap-language=EN
wat does this mean??
nisheeta

Mapping Error: com.sap.aii.utilxi.misc.api.BaseRuntimeException

Hi All,
I am workign on a scenario, where i am getting dtaa from SQL server using sender JDBC adapter.
I need to pass this data into a Z-RFC to update a ztable.
While executing the scenario, the messages are populatingin SXMB_MONI with the following error and Red Flag.
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_pavan_mm_: RuntimeException in
Message-Mapping transformatio~
I have tested Message Mapping in Repository. Its working fine.
But when i copy the payload from SXMB_MONI and paste the same payload in Message Mapping (Repository), the system is showing following Error.....
Details
java.lang.NullPointerException
STACKTRACE:
com.sap.aii.ib.core.mapping.exec.ExecuteException: java.lang.NullPointerException
 at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:477)
 at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169)
 at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52)
 at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:301)
 at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
java.lang.NullPointerException
STACKTRACE:
java.lang.NullPointerException
 at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59)
 at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182)
 at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:149)
 at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102)
 at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431)
 at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169)
 at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52)
 at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:301)
 at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I have tested the Configuration in Integration Directory with the payload from SXMB_MONI... The error is same as above mentioned.
In message mapping, the source message type is a data type similar to the selected fields from sql server.
The target message type is the imported RFC.
The RFC is working fine, when i enter the data manually in R/3.
I am unable to trace out the error behind this kind of situation....
Can any one guide me in this regard...??
Regards
Pavan

The payload got from Message Mapping....
<?xml version="1.0" encoding="UTF-8"?>
<ns0:SENDER_MT xmlns:ns0="http:
infotech-enterprises">
<zkunnr>AB10</zkunnr>
<zname1>PRATT</zname1>
<zstras>412,DALAL STREET</zstras>
<zadrnr>BGLR,FDFDFDF</zadrnr>
<ztelf1>434343434</ztelf1>
</ns0:SENDER_MT>
The Payload got from SXMB_MONI as follows...
<?xml version="1.0" encoding="utf-8" ?>
- <ROW>
- <row>
<zkunnr>AB10</zkunnr>
<zname1>PRATT</zname1>
<zstras>412,DALAL STREET</zstras>
<zadrnr>BGLR,FDFDFDF</zadrnr>
<ztelf1>434343434</ztelf1>
</row>
If i paste the payload from sxmb_moni into message mapping, i am getting following error...
java.lang.NullPointerException
If i paste the payload from sxmb_moni into Tools--->Test Configuration in Integration Directory, the following errro occurs in Interface Mapping.
java.lang.NullPointerException thrown during application mapping
Any idea what need to be done to resolve this error?
Regards
Pavan

Avoid the error: com.sap.aii.af.ra.ms.api.ConfigException:

Hi!
I still facing with the authorization error in the message (section: call of adapter).
The error is:
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Unauthorized: J2EE AE rejected user. Reason: Principal propagation is not active, but technical IS service user was not used (J2EE_ADMIN).</SAP:AdditionalText>
When I looked into configuration I found that the j2ee_admin user will be used here (see. bellow).
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://bera9010:50400/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = j2ee_admin</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 3705</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
Questions:
What is the name of technical IS service user searching here? (PIISUSER)?
How can I change this settings?
Any helpful information will be very appreciated!
regards
Holger

What is the name of technical IS service user searching here? (PIISUSER)?
Yes
Check the configuration guide with SAP note 974873 to find if any setting is missing.
Regards,
Prateek

Adaptive RFC 2 gives error: com/sap/ide/jco/service/internal/R3Service

Hi,
I've run into the following problem about NWDS. This happens as I create a Model. It appears there is a new version of the Adaptive RFC Model, which is called Adaptive RFC 2 Model.
1. Right click on Models, and select Create.
2. Double Click on Adaptive RFC 2 Model
3. The error pops up. It says "An error has occurred. See error log for more details. java.lang.NoClassDefFoundError". Then if you click details you get "An error has occurred. See error log for more details. com/sap/ide/jco/service/internal/R3Service "
If you know which log to have a look, or what this error is about please let me know urgently. Any help if much appreciated.
Thanks,
Ogeday Isiklar

Hi,
I am also getting same problem. Waiting for solution
Regards,
Pradeep Kumar

Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException:

Similar Messages

Maybe you are looking for