Error come when i install win 8 recovery

my laptop is hp pavelion g6 and product number is  C9L68PA#ACJ...when i install win 8 recovery cd ..after succesfullly installing 6 cd ..error come the restoration did not complete please select one of the following buttons...

Hello, ss26
Welcome to the HP forums.
It appears that you were attempting a recovery on the notebook and that after the 6th disk you got a message stating it did not complete. I will try to assist you with this.
Here is a document that may be able to assist: Troubleshooting HP System Recovery Problems (Windows 8).
Please try all of the steps it provides. Let me know how this goes for you.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

  • TS3694 how do you solve a error 1015 when restoring a iphone from recovery mode?

    how do you solve a error 1015 when restoring a iphone from recovery mode?

    This error is generally exhibited when someone tries to downgrade iOS. See this support document http://support.apple.com/kb/TS3694
    This is the part you are looking for.
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported. 
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • When completing install win 8 pro on my macbook pro using boot camp, the win 8 can't be started to complete win configure like user account and others, please help

    please, when I installed win 8 pro using boot camp vers. 5.0.2 it was completed but when win start the first time to be signed my user name and password the mid of screen appeare blue and the other black, then the whole things stoped.
    knowing that the win instalation going smoothley without problem during progress
    regards

    Did you download and install the Bootcamp Windows Support software according to the Bootcamp Installation Guides? http://www.apple.com/support/bootcamp/
    There is a Bootcamp Forum here. https://discussions.apple.com/community/windows_software/boot_camp
    You should ask Bootcamp questions there. The moderators may move this thread to the Bootcamp Forum.

  • I get 2 error's when i install scom 2007r2 in my lab servers.

    I get 2 error's when i install SCOM 2007r2 in my lab servers.Many people have got a similar error like this but not the exact one which i got. I also RAN this setup provided by MS to check SCOM traces and it removes and the application says no traces were
    found.
    Can any one suggest me what  can i do to over come this error. 
    Errors:
    2nd:
    Tool i used for finding traces: 
    System Center Operations Manager R2 Admin Resource Kit
    Result: No product data was found.

    Hi,
    Did you use domain admin to login the server to install SCOM 2007? And we may also need to login as domain admin on the SQL server, give its SA permission.
    Please go through the below two links and follow them to install and configure your SCOM:
    Operations Manager 2007 Deployment Guide
    http://technet.microsoft.com/en-us/library/bb419281.aspx
    Operations Manager 2007 R2 Installation and Configuration (step by step) – Part 1 “Pre-Build”
    http://blogs.technet.com/b/meamcs/archive/2011/01/09/operations-manager-2007-r2-installation-and-configuration-part1-pre-build.aspx
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • I get an Error 1935 when I install lightroom 5 upgrade on my PC running Windows 8

    I get an Error 1935 when I install lightroom 5 upgrade on my PC running Windows 8

    Hi standicker ,
    Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html and let me know whether it worked.
    Regards,
    Romit Sinha

  • We're sorry, an error has occurred while processing the request. Please try again. that error comes when i registred the apple care protection plan plzz suggestion me

    We're sorry, an error has occurred while processing the request. Please try again. that error comes when i registred the apple care protection plan plzz suggestion me

    Call AppleCare.

  • WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"

    WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"
    SUP = 720 and 720-3B
    00:08:03: %FILESYS-SP-5-DEV: PCMCIA flash card inserted into disk1
    Router#
    Router#
    Router#
    Router#sh disk1
    %Error show disk1: (No such device)
    Router#
    Its working fine with 128 MB Disk

    but my 128MB disk is working fine in both SUP and both slots..
    And this only proves that the PCMCIA slot is not at fault.  So this means that:
    256mb PCMCIA card is dead; or 
    256mb PCMCIA card is not standard (non-Cisco)
    I do not believe the 256 mb PCMCIA card is not working because it's not formated.  Even if it's not formated properly the error message would've been different.

  • Error Message when i install After Effects

    Hey Guys , Please help me
    I want try the 30 days Trial Test version from After effects i install it in Creative Cloud and when it extract then i become a Error message ..
    i click on it then it comes a table like this :
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1 {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} -----------
    ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
    ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "E:\Adobe After Effects CS6\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
    I got the same Probs on C++ 2008 but i have reinstall it so i got no problems there but on C++ 2010 i cant reinstall it when i try it he say me that i dont have more C++ 2010 on my Computer and i must install a new version so i install it but when i install a new version he say me "error during installation" :on your computer, there is a new version...
    Wtf?
    when i open my System Panel > programs and functions THERE is no Microsoft Visual C++ 2010 NOTHING from this i just have 2005 2007 and 2008 and there works !
    But i dont have any Visual 2010 Version on my Computer i cant install it or reinstall it i cant do nothing with the Version 2010 so i have the problem too install After Effects :/
    Please help me guys and sry for my english im from germany but i tryd it anyway to write my problem here and please dont answer so complicated
    Thanks

    See the following help document:
    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • IPhone 4S will not start or charge, error message when trying to restore in recovery mode

    So my iPhone 4S shorted out the other night while I was charging it. I did the hard reset and it restarted itself. But later that evening, it turned off and wouldn't restart no matter what and would not charge. When I connect it to my computer (mac) iTunes recognizes it and says it is in recovery mode and needs to be restored. It starts the restore process and the apple logo comes up with a loading bar but then when it gets to the "verifying restore with Apple" it gives an error message (9) and then the phone goes back. Please help!

    Hey rileyec,
    I found this information about error 9:
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    via: iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If those steps do not resolve the issue, I would attempt to perform a recovery-mode restore:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Cheers,
    Delgadoh

  • I keep getting Error 2 when i install iTunes-What do i do?

    I keep installing iTunes, when the installer finishes up, it say that it cannot run iTunsHelper due to no Apple Application Support. Why is this and how can i fix it?

    Hello Kelyse,
    Thank you for the details of the issue you are experiencing when installing iTunes on your computer.  I recommend following the steps in the article below when getting an error message trying to install iTunes.  One of the steps is to uninstall iTunes and all of it's related components; it is important to uninstall all of the components in the order that is listed:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error message when re installing itunes

    I keep having an error message when i try and reinstall itunes. I need it fixed as i have a new phone and cannot make it work till itunes is fixed someone plssssss help!! See error message attached

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Why am I getting an error message when I install?

    I'm trying to download the free Photoshop CS2 into my new Mac Book Pro and I'm getting an error message during the install process.  Acrobat Profession downloaded fine.  *I found the two programs here:
    http://www.adobe.com/downloads/cs2_downloads/index.html
    Suggestions?
    Andrea

    Read the info on the page. It's not compatible.
    Mylenium

  • Errors comes when populating bdctable

    hi,
    in bdc programming when i popolating bdctable by using
    this
    PERFORM POPULATE_BDCTABLE USING:
    '1''sapmf02d''0101',
    ''' rf02d-kunnr ' w_kna1-kunnr,
    ''' rf02d-d0110 ''x',
    ''' bdc_okcode ''/00',
    '1''sapmf02d''0110',
    '''kna1-land1''w_kna1-name1',
    '''kna1-ort01''w_kna1-ort01',
    '''kna1-pstlz''w_kna1-pstlz',
    '''bdc_okcode''/11'.
    a error comes that
    Different number of parameters in FORM and PERFORM (routine:          
    POPULATE_BDCTABLE, number of formal parameters: 3, number of actual          
    parameters: 1).
    what is this error plz explain to me and plz give its solution.
    thanks

    Hi Zuhi,
    Since im not much clear with your code, I will just say how i will proceed. If it helps you, i will be so happy.
    Coding Part:
    To Populate the BDC Table:
         PERFORM bdc_dynpro      USING 'SAPMF02D' '0110'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KNA1-SPRAS'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KNA1-NAME1'
                                      wa14_stab-name1.
        PERFORM bdc_field       USING 'KNA1-SORTL'
                                      'SE'.
        PERFORM bdc_field       USING 'KNA1-ORT01'
                                      wa14_stab-city1.
        PERFORM bdc_field       USING 'KNA1-PSTLZ'
                                      '64104'.
    *&      Form  bdc_dynpro
      Function to include the form for the DYNPRO
    FORM bdc_dynpro USING program dynpro.
      bdc_tab-program  = program.
      bdc_tab-dynpro   = dynpro.
      bdc_tab-dynbegin = 'X'.
      APPEND bdc_tab.
      CLEAR bdc_tab.
    ENDFORM.                    " bdc_dynpro
    *&      Form  bdc_field
      Function to include the form for the FIELD
    FORM bdc_field  USING fnam fval.
      bdc_tab-fnam = fnam.
      bdc_tab-fval = fval.
      APPEND bdc_tab.
      CLEAR bdc_tab.
    ENDFORM.                    " bdc_field
    This particular code will populate the BDC Table.

  • How to get past Error 2203 when re-installing PSE 10? [was: To whom it may concern]

    I have recently purchased a new computer and am trying to reload my copy of Photoshop Elements 10.
    Having started installation, I reached a certain point and received an error message: 2203 telling me I could not proceed as another process was locked the file options? I have no idea what this means but I could progress no further.
    Subsequently I have tried to reload both iTunes and Google Earth and am blocked as it tells me that another programme is trying to install. I assume the Photoshop.
    I have tried to uninstall but am told that it is not installed and have tried, again to install but am told that I must first uninstall the previous programme. The perfect circle.
    I now want this removed.
    I understand that you can download something to remove the blockage to start the installation again, from the start.
    Can you send me the details of how I can organise for you to carry this out? I can find no telphone number to call and am finding the situation extremely vexing.
    With thanks,
    Yours faithfully,
    Chris Druitt

    Hi, david,
    Thank you for your comment, I thought OS X server should do this by default, but it seems it doesn't for some reasons.
    Our firm likes to use two domains, let's say aaa.com and bbb.net and we have been using e-mail services on aaa.com through an ISP and like to set our OS X server as a mail server for bbb.net.
    So far, we found when aaa.com account send an e-mail to wrong [email protected], then aaa.com user receives an error message as we expected, that means OS X server works good enough for this part.
    On the other hand, when bbb.net account send an e-mail to wrong user@wrong domain, then the user can receive error message as expected.
    A problem is that when bbb.net user send an e-mail to wrong user@real domain (we tried sending to wrong [email protected]) , only once the user received the error message as expected, but not every time... this client was Eudora 6.0 on OS 9 and other clients both Eudora and Mail, both POP and IMAP account on OS X have never received any error messages...
    It seems a problem of getting mails from mailbox, so I tried to find any hints on the logs, but I cannot... Do you have any hints for me?

  • Error 103 when re-installing PSE 2.0 on Windows 7

    I uninstalled photoshop elements 2.0. When reinstalling photoshop elements 2.0 I get this error message 'Component move data had the following error'
    Media name: DATA
    Component uninstall: DLL
    Error number - 103
    Also error occurred during move data process - 623
    What do I do to reinstall photoshop elements 2.0?  I am using Windows 7

    if that's really pse 2, it may be incompatible with your os.  you could try installing using compatibility mode but i don't know if there's an os old enough offered.
    win xp might work, but that would be pre-sp 3 release.

Maybe you are looking for