Error comes up in Actions

I have Elements 9 and I just downloaded a few actions. The error that comes up when I try to run the actions is "The command 'Make' is not available." I have created a new layer so that it is not trying to perform the action on the background layer and it still does not work. Thanks!
Allyson

Barbara:
Here is my problem: I live in the mountains in the north of Chile. Last June I had a friend buy for me PSE9 in the U.S. and brought it back with her. I installed it on 07/01 by 07/05 I started to get the following notice; "Loading the Elements Organizer Workspace." It stays in that mode for ever and prevents me from doing any work with it. At the present time the notice reads; "The command could not be completed because the Editor was busy. Please finish the current operation and try again." There is no current operation going on.
My phone connection is via satellite and your operators will not help me because; "the transmission is breaking up." I talk every day via this system with the U.S with absolutely no problems of reception. I'm willing to pay the $ 39.99 fee to solve this problem.
Could you please have someone with the knowledge to solve this glitch contact me via chat or email because I'm beyond frustration. Please help me, I'm a week late with a photo job because I cannot work with PSE9. THANK YOU.
The serial # is: < deleted>
If you need a credit card # I'll be happy to provide it to you.
Be well,
Michael G. Huidobro
[email protected]
This was written to Adobe with no luck. My question to you is; is there a chance that by uninstalling PSE9 and reinstalling the program I might be able to solve the problem?
Thank you,
M.

Similar Messages

Dump error while running termination action

I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors         SYNTAX_ERROR
Date and Time          21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
     Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
      include "LCACS_BU_PARTNERU44 " in
     line 19:
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
     "r such tables in a Unicode context."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     The following syntax error was found in the program SAPLCACS_BU_PARTNER :
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program                                 SAPLBUD_CHECK
Include                                 LBUD_CHECKF01
Row                                     1.129
Module type                             (FORM)
Module Name                             RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1   CALL FUNCTION 'BDT_TBZ1F_GET'
2     EXPORTING
3       iv_objcn = gc_objcn_bupa
4       iv_objap = gc_objap_bupa
5     TABLES
6       et_tbz1f = lt_tbz1f
7     EXCEPTIONS
8       not_found = 1
9       OTHERS    = 2.
0   READ TABLE lt_tbz1f INDEX 1.
1   IF sy-subrc = 0.
2     CALL FUNCTION 'BUP_PARTNER_GET'
3       EXPORTING
4         i_partner    = is_but100-partner
5         i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS       = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE     ztpkt = 'RLDEL'
             AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner        = is_but100-partner
i_partnerguid    = ls_but000_int-partner_guid
i_role           = is_but100-rltyp
i_dfval          = is_but100-dfval
i_calltp         = iv_calltp
i_valid_from     = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to       = is_but100-valid_to_dats
i_valid_to_old   = iv_valid_to_old
PORTING
e_result         = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result.                          "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -

HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik.

How to Resolve this Error comming in SMP2.3 HWC?

Hi Experts,
20140605T150459.418|1|MyDynamicChart:1 -- Request: <M><H></H><S>Start</S><A>GetCustomData</A><VS><V k="Port_et_key" t="T">1433</V><V k="User_Name_et_key" t="T">sup</V><V k="Password_et_key" t="T">123</V><V k="Vertical_Column_et_key" t="T">sal</V><V k="No_of_Rows_wt_key" t="T">7</V><V k="Horizontal_Column_et_key" t="T">name</V><V k="Database_Name_et_key" t="T">sup</V><V k="Ipaddress_et_key" t="T">192.168.1.7</V><V k="Table_Name_et_key" t="T">emp</V><V k="ErrorLogs" t="L" /></VS></M>
20140605T150459.418|1|MyDynamicChart:1 -- ResponseHeader: {"id":"a4af2a9cbf7c48f8a06c2c46a977fefc","cid":"46#MyDynamicChart:1","pv":"3","sig":"94f82e26311448c1901e444c7c7f475e","loginFailed":false,"method":"searchFailed","log":"[{\"_op\":\"N\",\"level\":\"ERROR\",\"code\":404,\"eisCode\":\"400\",\"message\":\"com.sybase.dataservices.DSException:HTTP status code is [400], expected [200]; response body is []\",\"component\":\"Newconnection_driverName_com_microsoft_sqlserver_jdbc_SQLServerD\",\"entityKey\":null,\"operation\":\"search\",\"requestId\":\"a4af2a9cbf7c48f8a06c2c46a977fefc\",\"timestamp\":\"2014-06-05 09:34:59.366\",\"messageId\":610003,\"_rc\":0}]","mbo":"Newconnection_driverName_com_microsoft_sqlserver_jdbc_SQLServerD","app":"MyDynamicChart:1","pkg":"dynamicdbchart:1.0"}
20140605T150946.650|3|Mychart:1 -- loading meta data from: C:\SAP\MobilePlatform\Servers\MessagingServer\Bin\Mobile Workflow\456_1\workflowclient.xml
20140605T150946.810|3|Mychart:1 -- loading meta data for screen: Start and action: Login
20140605T150946.912|3|Mychart:1 -- executing operation 'LoginQuery' of type 'search' on mbo 'ChartLogin' in package 'chart:1.0'
20140605T150946.920|3|Mychart:1 -- using username and password value from server context variables.
I am using a Rest Web Service, which takes input.
the service is working fine in the browser and Rest Client, but when I am calling this MBO, it is generating the above error.
How is this error comming?
How to Resolve this?
Regards,
Sravanya.

Hello Midhun,
Yes, that is a data type problem. In my service is taking the noofrows in "INT" format.
This is my service,
/newconnection?noOfRows={noofrows}
when i created the MBO with this service it is taking the datatype of the "noofrows" in string format.
how to change that datatype to INT type?
Sravanya.

"Action does not exist error" during country transfer action

Hello, everyone.
We are on ECC5.0 with MGE. Recently our users are getting an error - "Action does not exist on mm/dd/yyyy" when they perform a country transfer action (transfer from country A to country B). Because this is a hard error, the action is stopped and our users have to re-execute it. Surprisingly, the action works fine for the second time.
The error comes from message class PG no. 022 in the Include program MP000040.
We raised this issue to SAP but all they told us to look into our user exits. We were told to remove our exits entirely to see the error happens. The problem is that this error does not happen each time.
Has anyone experienced this error? If so, does anyone know why this is happening and how to resolve it?
We tried to debug the code step by step and came across CPREL is filled with "02" in OBJPS for infotype 0000 in the program FP50MF10. We have no idea as to how the OBJPS is filled with a value. Infotype 0000 is not supposed to have this field populated. We think this is the root cause of the error. But why does it happen?
Any help will be greatly appreciated.
Regards,
Noriko

Hi.
We use both PBAS0001 and HRBAS00_CCHANGE.
Noriko

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

Hello Team,
WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
Below are the steps we have tried:
1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
a. Compare characterstic of P/Q table with X/Y tables.
b.SID values in X and Y tables.
2. We have changed the DSO setting from Parallel to Serialized Activation.
Also the format of the values are as per the designated type.
One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
Please let us know , what else can be done to fix this issue.
Thanks in Advance,
Nikhil

HI Nikhil,
please go through the documents.
http://scn.sap.com/thread/1820047
http://scn.sap.com/message/14266151
http://scn.sap.com/thread/1520825
Regards,
Abdul rAwoof Syed.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

Dear experts,
I'm getting this error when activating an DSO.
I'll try to explain when this error happens.
I have a DTP in Delta Mode between 2 DSO's.
The first time I run the DTP the DSO activates with no problems.
The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
I've googled it but I can't find a solution for this.
The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
The next Delta that has Data gave error when activating the DSO.
Whan can be happening here?
Best Regards,
Rui Romba

So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
DSO1 feed data to DSO2 correct.
Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
Check out the document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
Regards,
AL
Message was edited by: Anshu Lilhori

IDVD working till I installed 2TB ED. Keep getting message"There was an internal iDVD error during the last action. This is not a movie." Any help is appreciated.

iMovie message "There was an internal iDVD error during the last action. This is not a movie." comes up after trying to create a movie to burn to iDVD. Recently added a 2TB external drive to free up memory from HD. iDVD was working fine till the ED was added. Can't burn DVDs anymore. Any suggestions on how to fix the problem?

What folders did you move to the EHD? Any of the basic Home folders? What format is the EHD? It should be OS X Extended (journaled). Do you have any files that iDVD uses on the EHS, i.e. project files, media files?
OT

Getting a error invoking web service action block

HI
I am first time using web service action block in xmii. I am using it for executing my transaction . But it is giving error stating that
Error invoking web service action block. I dont know please help me out?

Hi Mike,
I am using xMII - 11.5 version and with java 1.6.0_07. In My system i have installed service pack 3. When ever i use webservice action block and execute it, It gives error stating .
[INFO ]: Execution Started At: 11:07:16
[DEBUG]: 00000.01600 Begin Transaction 'TMP83E3D064-F6E8-4E3D-647F-6CE6B41C9E83'
[DEBUG]: 00000.01600 Begin Sequence Sequence : ()
[DEBUG]: 00000.01600 Begin Action WebService_0 : ()
[ERROR]: Error Invoking Web Service Action: null
[ERROR]: ACTION FAILED: End Action WebService_0 : ()
[DEBUG]: 00001.42200 Begin Sequence Sequence_0 : ()
[DEBUG]: 00001.42200 Begin Action Tracer_0 : ()
[INFO ]: <?xml version="1.0" encoding="UTF-8"?><XacuteResponse xmlns="http://www.lighthammer.com/Xacute"><Rowsets DateCreated="2000-01-01T00:00:00" EndDate="2000-01-01T00:00:00" StartDate="2000-01-01T00:00:00" Version=""><FatalError/><Messages><Message/></Messages><Rowset><Columns><Column Description="" MaxRange="0.00" MinRange="0.00" Name="" SQLDataType="0" SourceColumn=""/></Columns><Row><Output/></Row></Rowset></Rowsets></XacuteResponse>
[DEBUG]: 00001.43700 End Action Tracer_0 : ()
[DEBUG]: 00001.43700 End Sequence Sequence_0 : ()
[DEBUG]: 00001.43700 End Sequence Sequence : ()
[DEBUG]: 00001.43700 End Transaction 'TMP83E3D064-F6E8-4E3D-647F-6CE6B41C9E83'
[INFO ]: Execution Completed At: 11:07:17 Elapsed Time was 1421 mS
please help me out .

Latest Error Handling for Dynamic Actions

Is there any documentation on the Latest Error Handling for Dynamic Actions?

BillC,
Interesting that I was looking around for the same thing after seeing a Foreign Key violation in my application.
I found this article by Patrick Wolf:
APEX 4.1 – Error Handling Improvements – Part 1
http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/
I believe you need to be on 4.1 or later though.
Thanks,
Joe

Error:"com.businessobjects.wp.om.OMReportElement Container (Error: INF) "

When trying to open document in infoview, the following error message was showed:
com.businessobjects.wp.om.OMReportElement Container (Error: INF)
version:BOXI3.1 update version
Before the error occured, the following action was taken.
using the following command line to start the stoped server
net start "Apache Tomcat 5.5.20"
net start "Server Intelligence Agent (host name)"
After confirming the server was started, try to open document , then the error message was showed.
・it has happened one time
・new document can be create
・it works ok after restart the service
・no error has orrured during using command line

Thanks for your reply.
We are on Unix environment and we use these commands to stop and start:
to stop cms and tomcat - /bobje/stopservers and /bobje/tomcatshutdown.sh
and
to start cms and tomcat - /bobje/startservers and /bobje/tomcatstartup.sh

Error: com.crystaldecisions.celib.exception.c: ASSERTION FAILED

Post Author: floatsam
CA Forum: JAVA
Hi All, I'm trying to retrieve a report from infostore using code below: IInfoStore iStore = (IInfoStore)enterpriseSession.getService("InfoStore");IInfoObjects result = iStore.query("SELECT SI_KIND FROM CI_INFOOBJECTS WHERE SI_KIND = 'FullClient' AND SI_INSTANCE=0 AND SI_ID = 3664");I get the following error: com.crystaldecisions.celib.exception.c: ASSERTION FAILED at java.lang.Throwable.<init>(Throwable.java) at com.crystaldecisions.celib.exception.c.<init>(Unknown Source) at com.crystaldecisions.celib.trace.d.a(Unknown Source) at com.crystaldecisions.enterprise.ocaframework.k.a(Unknown Source) at com.crystaldecisions.celib.properties.Property.a(Unknown Source) at com.crystaldecisions.celib.properties.Property.getPropertyBag(Unknown Source) at com.crystaldecisions.celib.properties.PropertyBag.getPropertyBag(Unknown Source) at com.crystaldecisions.sdk.occa.pluginmgr.internal.a.getSecurityInfo(Unknown Source) at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.a(Unknown Source) at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.<init>(Unknown Source) at com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreFactory.makeOCCA(Unknown Source) at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source) at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source) at com.dcx.dealerconnect.ddpr.controller.WelcomeActionXI.execute(WelcomeActionXI.java) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110) at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174) at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313) at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116) at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283) at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42) at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176) at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79) at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201) at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71) at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182) at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334) at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56) at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610) at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java) I'm using Websphere 5.0 and Java sdk to access the report. I'm able to login to CMS correctly. I get this error when i retrieve the infostore. Anyone else had the same problem?Thanks.

I am facing the same problem . Anyone has the reason why this happens or the solution ?
Thanks in advance.

When i try to save purchasing request following error come

HI ALL
When i try to save purchasing request following error come , i oracle webside not number ID 1095183.1 it say i need to apply a pach. but in the R12.1.3 already apply the patch
but still this error comming what can i do now
please help me
APP-PO-14142: get_real_segment1-: ORA-01407: cannot update ("PO"."PO_REQUISITION_HEADERS_ALL"."SEGMENT1") to NULL
Cause: A SQL error has occurred in get_real_segment1.
The SQL error is ORA-01407: cannot update ("PO"."PO_REQUISITION_HEADERS_ALL"."SEGMENT1") to NULL
Action: Take note of both this error number and the actions you were trying to perform. Contact your system administrator for further assistance

It seems when you are trying to save a requisition, system is not allowing to save the requsition (requisition Number : segment1 of PO_REQUISITION_HEADERS_ALL table). It may be b'coz of unique key violation...
You need to check the Purchasing option setup too. Is the Document Numbering against Requisition number is set as Entry : Manual and Type : Numeric? ... if so then you might be trying to use an existing requisition number...
If above case is not true then we will recommend you to raise a SR with oracle for your issue.. They may guide you better :)
/S.P DASH

0xE80003FFE error comes up when I try to snyc app

My daughter has somehow deleted itunes,app store and safari apps from my iphone. I backed up my iphone and then restored it to factory settings through itunes. Now I have lost all my apps from my iphone and itunes library. I still have all my music in itunes library but cannot get them back on my iphone. When trying to get music back on iphone the itms://?action=music error comes up. When I try to download a new app from computer to iphone 0xE80003FFE error comes up. Please help I have no idea what to do???

Hi,
I had a same problem which was solved when I remove the "restrictions" settings.
Please check the settings.

Error Invoking Web Service Action: null

I am using the WEBSERVICE action in the BLS to access a third party system. I am getting an error during execution: [ERROR]: Error Invoking Web Service Action: null. I cannot find any messages in any of the logs. Even though the action fails, the remote WebService processes properly. My basis guy seems to think that it is related to SOAP incompatibilities/versions. Any other ideas floating around out there? Any other methods to troubleshoot? The external application uses Document-Literal Style web services and conforms to WS-I Basic Profile.

All -
Here is a trace. My remote web service returns an empty SOAP body upon success (SOAP envelope only). Is this causing the Null Pointer Exception??
PS - I am also getting a lot of "WARNING: received an illegal cookie" messages. Is this a problem.
[Wed Mar 19 16:38:08 EDT 2008] <?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope ...xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body> ...blah, blah...</soap:Body>
</soap:Envelope>
[Wed Mar 19 16:39:09 EDT 2008] java.lang.NullPointerException
[Wed Mar 19 16:39:09 EDT 2008]      at org.apache.commons.httpclient.HttpMethodBase.getStatusCode(HttpMethodBase.java:590)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.webservice.SoapClient.invoke(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.actions.webservice.WebServiceAction.RawInvoke(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.actions.webservice.WebServiceAction.Invoke(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.core.Action.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.engine.TransactionEngine.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.core.ActionSequence.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.engine.TransactionEngine.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.core.ActionSequence.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.engine.TransactionEngine.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.core.ActionSequence.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.engine.TransactionEngine.Process(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.engine.TransactionEngine.Execute(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.xacute.services.Runner.doGet(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
[Wed Mar 19 16:39:09 EDT 2008]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.SERequestDispatcher.forwardServlet(SERequestDispatcher.java:638)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.SERequestDispatcher.forward(SERequestDispatcher.java:236)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.SERequestDispatcher.internalForward(SERequestDispatcher.java:283)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.SEFilterChain.doFilter(SEFilterChain.java:96)
[Wed Mar 19 16:39:09 EDT 2008]      at com.lighthammer.cms.system.CMSFilter.doFilter(Unknown Source)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.SEFilterChain.doFilter(SEFilterChain.java:60)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ApplicationInfo.filterApplRequest(ApplicationInfo.java:2159)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ApplicationInfo.processApplRequest(ApplicationInfo.java:1823)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ServerHostInfo.processApplRequest(ServerHostInfo.java:937)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ServletExec.ProcessRequest(ServletExec.java:1091)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ServletExec.ProcessRequest(ServletExec.java:973)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ServletExecService.processServletRequest(ServletExecService.java:167)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.ServletExecService.Run(ServletExecService.java:204)
[Wed Mar 19 16:39:09 EDT 2008]      at com.newatlanta.servletexec.HttpServerRequest.run(HttpServerRequest.java:487)
[Wed Mar 19 16:39:10 EDT 2008] WARNING: received an illegal cookie name: $Version
[Wed Mar 19 16:39:10 EDT 2008] Cookie: $Version=0; JSESSIONID=mZrFUwEbv-vJKx8dds2Swq6k9k; $Path=/Lighthammer, $Version=0; JSESSIONPROXY=mZrFUwEbv-vJKx8dds2Swq6k9k; $Path=/
[Wed Mar 19 16:39:10 EDT 2008] User-Agent: Jakarta Commons-HttpClient/2.0.2
[Wed Mar 19 16:39:10 EDT 2008] WARNING: received an illegal cookie name: $Path
[Wed Mar 19 16:39:10 EDT 2008] Cookie: $Version=0; JSESSIONID=mZrFUwEbv-vJKx8dds2Swq6k9k; $Path=/Lighthammer, $Version=0; JSESSIONPROXY=mZrFUwEbv-vJKx8dds2Swq6k9k; $Path=/
[Wed Mar 19 16:39:10 EDT 2008] User-Agent: Jakarta Commons-HttpClient/2.0.2
[Wed Mar 19 16:39:10 EDT 2008] WARNING: received an illegal cookie name: $Path
[Wed Mar 19 16:39:10 EDT 2008] Cookie: $Version=0; JSESSIONID=mZrFUwEbv-vJKx8dds2Swq6k9k; $Path=/Lighthammer, $Version=0; JSESSIONPROXY=mZrFUwEbv-vJKx8dds2Swq6k9k; $Path=/
[Wed Mar 19 16:39:10 EDT 2008] User-Agent: Jakarta Commons-HttpClient/2.0.2

How can i display a message box when error comes in jsp?

Hi,
i need to display a message box whenever an error comes in my jsp. Actually my appln is that i am creating a bar chart using one applet by taking data from the database. When a user does not select a number data for y axis, now in the centre of the web page one java error is coming. "not in number format". it is looking very odd.
so i want to display the error in a message box whenever it comes as above. pls help me how can i do the same...
Regds,
Abhi...

Hi,
thanx for ur response. so u mean to say that i can
display the errors in the web page itself instead of
displaying as a message box?Either way. You can have the JSP send a message to the applet to display a message box. Or you can just have the JSP do it. or you can have the applet detremine if the JSP would produce an error and then display the message it would display.
>
actually i am using servlets. jsp pages are used only
as the front end. all the background works are doing
in servlet only.It should be the same in any case. Is the applet connecting to the JSP pages or are you having the browser do it?
>
pls get back...

Error comes up in Actions

Similar Messages

Maybe you are looking for