Error comes up when I use the command:Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
Hello,
When I am using the command c:\Exchange2013\>Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms on my domain controller I am receiving the error below:
Welcome to Microsoft Exchange Server 2013 Service Pack 1 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareA
D'. No Exchange 2007 server roles have been detected in this topology. After thi
s operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms
.exch.setupreadiness.NoE12ServerWarning.aspx
Configuring Microsoft Exchange Server
Organization Preparation FAILED
The following error was generated when "$error.Clear();
initialize-ExchangeConfigurationPermissions -DomainController $RoleDomai
nController
" was run: "Active Directory operation failed on domain.com
. This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF
_ACCESS_RIGHTS), data 0
I am using an admin account with full rights. Could you give me any advice what might that be?
Thank you in advance
Regarding this article: http://ayalaaii.wordpress.com/2012/12/20/exchange-2010-insuff_access_rights-this-error-is-not-retriable-additional-information-access-is-denied/
I have managed to get into the permissions in Advanced Security settings, but for some reason I am not able to find “Include
Inheritable permissions from this objects parent”
Any ideas where can it be?
Thank you
Similar Messages
-
I have a new iMac running OS 10.9. When I use the Command S shortcut in any of my apps (numbers, text edit etc), it no longer saves the active document it speaks it instead. How can I revert to the save shortcut function?
have you looked in
system preference->Dictiation & speech if it's assigned there?
or system preference->accessibility if it's assigned there? -
Hi guys,
When ever I use the command "Say" in terminal,it says the words I want it to say,but then gives me this error:
MTBEAudioUnitSoundOutput::PropagateProperty Error -10851,
Should I be worried about this?
Here are my Specs:
iMac
21.5-inch, Mid 2011
Processor 2.7 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Software OS X 10.8.4 (12E55)
Thanks again,
Bye.Hello,
Are you running any AV software?
Are you using stock voices, or custom ones? -
I am having an issue when I use the "Place in Photoshop" command from within Bridge CC, it is skipping the Camera Raw Dialog box and not behaving like a normal smart object. This has been my workflow for years and suddenly it's not working in CC. Anyone have any advice? Thanks!
As far as i can tell, if you use Place>In Photoshop from Bridge with a camera raw file and don't have any other documents open, it skips the camera raw dialog, but does place (open as a smart object)
and then you can double click on the smart object icon on the thumbnail in the l;ayers panel to open camera raw.
If you already have a document open then Place>In Photoshop using a camera raw file opens the camera raw dialog before placing the photo.
Also check the photoshop>Preferences>General and verify you have Place or Drag Raster Images as Smart Objects checked.
The above behaviour seems to be the same in photoshop cc as past versions of photoshop, at least on the windows versions. -
I can't get the original disk to work on a reinstall. I get the message
AdobeColorCommonSetRGB
Error:
Error 2.
I teach a class using this program on Macintosh computers running 10.9.5 and the action script is not working. It will work on any program designed using the 10.8 but if you design any animation on 10.9.5 the action script will not work for the buttonsYou would have to manually delete the color profiles in question... Run the cleaner tool and see if it gets you started.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium -
The error in billing when we use the rebate
1.According to the customeru2019s requirements, we need to create the rebate agreement link to the sales deal first.
2.We create the sales order with the relevant information of rebate.
3.Then create the delivery reference to the sales order, but the system has used the WM module. We need to create the transfer order to do the picking, after confirm the transfer order and we could do the post goods issue. So far, there is no issue for this process.
4.When we create the billing, there would display the messageu201DPricing error in item 0000001u201D.The item condition would have many additional condition types which should not list in the condition.
you select the condition type with no amount and click condition record. It would display the price condition which had no relationship with the document.
5.By the way, whenever we not click the rebate check box for this customer, the billing is correct.
Have any one meet this issue before or could give me any clue ?Thank you in advance.Hi,
Go to the condition type eg BO02 in the billing document and click on details
Here it should show
1. Condition values - Can check the condition base value and amount
2. Control Data - can check cond class, calc type.....Cond Origin
3. Account Determination - G/l account hit etc
4. Scales
5. Rebate Details - Rebate agreement details etc
Best Regards
Mahesh
Edited by: Mahesh Sandbhor on Aug 7, 2009 7:52 AM -
fire fox will not open
See:
*[[/questions/910134]]
Seems to be caused by a corrupted Visual C++ installation (multiple versions can be installed side-by-side; SxS).
You can try to use the sxstrace.exe tool to see if you can find which files are missing or corrupted and (re)install missing Visual C++ libraries.
* http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html
* http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-ad68-465e18e3f3ef -
Why doesn't Firefox close tabs when I use the command-w shortcut keys?
Every so often, on random sites, I would have 2 or three tabs open. I would command-w (on a Mac) to close the front most tab, and it would close. Bringing the next tab to the front. But when I hit command-w again, I get the warning sound on my Mac, and the tab does not want to close. Even though Firefox is at the most front of applications, and the tab I'm trying to close is at the front of Firefox browser window. I have to click on the page (even though it's already at the front), for command-w to work and close the tab. I've reset Firefox to default twice already. I've even deleted it, and reinstalled it.
One situation in which Command+w or Ctrl+w might not work is if the "focus" is in a plugin such as the Flash player used on Youtube after you interact with the player controls. Firefox will continue to send the keyboard input to the plugin until you move the focus back to the page. Does that account for any of the problem?
-
Odd event when I use the Command+P shortcut.
I 've been using LR for a loooong time and never run into this. When I flag a photo (Command P) the frame advances to the next photo. I don't want this to happen. I'm sure I've hit something to cause this, but don't know how to reset it back to NOT moving to the next frame.
Turn off your caps lock. If the caps lock key is activated Lightroom also will auto advance. It is a feature that is there to help expedite rating images and other such tasks that you might want to get through quickly.
-
I have been using Firefox for a long time now since AOL became
S O SLOW with their Desktop Version in loading up mail.
But in the last two months I have been loading my AOL mail and some of mine and my husband's do not come up at all, even when they are forwarded by other people.
The header is there and it says the mail was loaded, but nothing in the actual page comes upOK you need to upload these images to your remote server because they are missing from the server or that they have gone to a different folder.
http://www.elchocomining.net/double%20drawings/Florentino.jpg
http://www.elchocomining.net/double%20drawings/Mujer+matracaA.jpg
http://www.elchocomining.net/drawings%20/DJMujerarreglandocanal.jpg
http://www.elchocomining.net/drawings%20/DibujoProhibido.jpg
http://www.elchocomining.net/drawings%20/LTCocinaA.jpg
http://www.elchocomining.net/drawings%20/BbTrilladoradeArroz.jpg
http://www.elchocomining.net/drawings%20/TallerCoserA.jpg
In future always define your site correctly with all folders and file names without spaces in them. For example "drawings 20" is not a good name. You should rename it to "drawings20".
When you have corrected this especially when you have uploaded the photos again then they will appear all right on the page. after that you need to validate your pages for correct HTML and CSS but this can wait for now.
Good luck. -
When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?
It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve -
When I use the export function of quicklime (export to iPad,iPhone, Apple TV ... format), nothing append and I have the following error message on the monitor windows, (I'm using quicktime Version 10.4 (833) with OS X Yosemite ):
06/11/2014 22:22:03,507
QuickTime Player[1723]
postExceptionEvent caught non-fatal NSInvalidArgumentException '*** -[NSDictionary initWithObjects:forKeys:]: count of objects (0) differs from count of keys (4)' with backtrace (
0 CoreFoundation 0x00007fff8ac6564c __exceptionPreprocess + 172
1 libobjc.A.dylib 0x00007fff8924f6de objc_exception_throw + 43
2 CoreFoundation 0x00007fff8ab98dcd -[NSDictionary initWithObjects:forKeys:] + 941
3 Foundation 0x00007fff8a6a8bcc -[NSDictionary(NSDictionary) initWithCoder:] + 245
4 Foundation 0x00007fff8a686150 _decodeObjectBinary + 2872
5 Foundation 0x00007fff8a6854a6 _decodeObject + 278
6 Foundation 0x00007fff8a6a9921 -[NSKeyedUnarchiver decodeObjectOfClasses:forKey:] + 173
7 Foundation 0x00007fff8a75f2b4 -[NSError initWithCoder:] + 253
8 Foundation 0x00007fff8a686150 _decodeObjectBinary + 2872
9 Foundation 0x00007fff8a6854a6 _decodeObject + 278
10 Foundation 0x00007fff8a6ab0c9 +[NSKeyedUnarchiver unarchiveObjectWithData:] + 89
11 QuickTime Player 0x000000010dcd8253 QuickTime Player + 758355
12 QuickTime Player 0x000000010dc8981f QuickTime Player + 436255
13 QuickTime Player 0x000000010dc894fb QuickTime Player + 435451
14 QuickTime Player 0x000000010dc6ce48 QuickTime Player + 319048
15 AppKit 0x00007fff93c5d75a __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1714 + 113
16 AppKit 0x00007fff93c4efca -[NSDocument continueActivityUsingBlock:] + 323
17 AppKit 0x00007fff93c5d5cb __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_21706 + 458
18 AppKit 0x00007fff93c5d0ec __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1690 + 1365
19 AppKit 0x00007fff940903b6 -[NSVBSavePanel didEndPanelWithReturnCode:] + 68
20 AppKit 0x00007fff9409323d -[NSVBSavePanel didEndSheet:returnCode:contextInfo:] + 154
21 AppKit 0x00007fff93f718d9 -[NSWindow _endWindowBlockingModalSession:returnCode:] + 315
22 AppKit 0x00007fff9409307c -[NSVBSavePanel observeValueForKeyPath:ofObject:change:context:] + 560
23 Foundation 0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
24 Foundation 0x00007fff8a676e48 NSKeyValueDidChange + 463
25 Foundation 0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
26 ViewBridge 0x00007fff959cbbd7 -[NSViewBridge nonLocalChangeInProgress:block:] + 382
27 ViewBridge 0x00007fff95a15766 -[NSRemoteViewMarshal exceptionSafeSetRemoteObject:forKey:withReply:] + 275
28 ViewBridge 0x00007fff95a158f1 -[NSRemoteViewMarshal setRemoteObject:forKey:withReply:] + 56
29 CoreFoundation 0x00007fff8ab3e33c __invoking___ + 140
30 CoreFoundation 0x00007fff8ab3e192 -[NSInvocation invoke] + 290
31 ViewBridge 0x00007fff95a1bce3 __deferNSXPCInvocationOntoMainThread_block_invoke + 85
32 ViewBridge 0x00007fff95a1b91e __deferBlockOntoMainThread_block_invoke_2 + 390
33 CoreFoundation 0x00007fff8ab8354c __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
34 CoreFoundation 0x00007fff8ab75655 __CFRunLoopDoBlocks + 341
35 CoreFoundation 0x00007fff8ab75196 __CFRunLoopRun + 1814
36 CoreFoundation 0x00007fff8ab74838 CFRunLoopRunSpecific + 296
37 HIToolbox 0x00007fff8cb6f43f RunCurrentEventLoopInMode + 235
38 HIToolbox 0x00007fff8cb6f1ba ReceiveNextEventCommon + 431
39 HIToolbox 0x00007fff8cb6effb _BlockUntilNextEventMatchingListInModeWithFilter + 71
40 AppKit 0x00007fff9383b821 _DPSNextEvent + 964
41 AppKit 0x00007fff9383afd0 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
42 AppKit 0x00007fff9382ef73 -[NSApplication run] + 594
43 AppKit 0x00007fff9381a424 NSApplicationMain + 1832
44 libdyld.dylib 0x00007fff8ec845c9 start + 1
timestamp: 22:22:03.507 Thursday 06 November 2014
process/thread/queue: QuickTime Player (1723) / 0x7fff78cd0300 / com.apple.main-thread
code: line 844 of /SourceCache/ViewBridge/ViewBridge-99/ViewBridgeUtilities.m in logCaughtException
#exceptions
06/11/2014 22:22:03,525
com.apple.appkit.xpc.openAndSavePanelService[1748]
remote view failed to set bridge object {
URL = "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v";
URLs = (
"file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v"
index = 1;
result = 1;
} for key most-recent-completion due to Error Domain=com.apple.ViewBridge Code=8 "L’opération n’a pas pu s’achever. (com.apple.ViewBridge erreur 8)." UserInfo=0x61000006ebc0 {com.apple.ViewBridge.error.hint=most-recent-completion, com.apple.ViewBridge.error.description=NSViewBridgeExceptionError}; service call stack was (
0 ViewBridge 0x00007fff959e8b30 -[NSViewServiceMarshal setRemoteObject:forKey:] + 341
1 Foundation 0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
2 Foundation 0x00007fff8a676e48 NSKeyValueDidChange + 463
3 Foundation 0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
4 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661407 com.apple.appkit.xpc.openAndSavePanelService + 9223
5 AppKit 0x00007fff93dead5a -[NSSavePanel _dismissModeless:] + 109
6 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a66191c com.apple.appkit.xpc.openAndSavePanelService + 10524
7 AppKit 0x00007fff93ded580 -[NSSavePanel ok:] + 449
8 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661952 com.apple.appkit.xpc.openAndSavePanelService + 10578
9 libsystem_trace.dylib 0x00007fff8d3ebcd7 _os_activity_initiate + 75
10 AppKit 0x00007fff93a0a5e7 -[NSApplication sendAction:to:from:] + 410
11 AppKit 0x00007fff93a0a410 -[NSControl sendAction:to:] + 86
12 AppKit 0x00007fff93bdedaf __26-[NSCell _sendActionFrom:]_block_invoke + 131
13 libsystem_trace.dylib 0x00007fff8d3ebcd7 _os_activity_initiate + 75
14 AppKit 0x00007fff93a52f2c -[NSCell _sendActionFrom:] + 144
15 AppKit 0x00007fff93bc5ab2 -[NSButtonCell _sendActionFrom:] + 39
16 libsystem_trace.dylib 0x00007fff8d3ebcd7 _os_activity_initiate + 75
17 AppKit 0x00007fff93a6da66 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 2731
18 AppKit 0x00007fff93a6ccc1 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 491
19 AppKit 0x00007fff93a6c289 -[NSControl mouseDown:] + 714
20 AppKit 0x00007fff93f65fef -[NSWindow _reallySendEvent:] + 12827
21 AppKit 0x00007fff939f065c -[NSWindow sendEvent:] + 368
22 AppKit 0x00007fff939a21e6 -[NSApplication sendEvent:] + 2238
23 ViewBridge 0x00007fff959d18ab -[NSViewServiceApplication sendEventWithoutCatch:withForwarding:] + 652
24 ViewBridge 0x00007fff959d1fbd -[NSViewServiceApplication sendEvent:withForwarding:] + 29
25 AppKit 0x00007fff9382efe8 -[NSApplication run] + 711
26 AppKit 0x00007fff9381a424 NSApplicationMain + 1832
27 libxpc.dylib 0x00007fff88837ef2 _xpc_objc_main + 793
28 libxpc.dylib 0x00007fff88839a9d _parse_sysctl_once + 0
29 ViewBridge 0x00007fff95a20165 xpc_connection_handler + 0
30 ViewBridge 0x00007fff959d4ff7 NSViewServiceApplicationMain + 1892
31 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a665035 main + 208
32 libdyld.dylib 0x00007fff8ec845c9 start + 1
33 ??? 0x0000000000000001 0x0 + 1
timestamp: 22:22:03.525 Thursday 06 November 2014
process/thread/queue: com.apple.appkit.xpc.openAndSavePanelService (1748) / 0x7fff78cd0300 / com.apple.main-thread
code: line 3847 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in __47-[NSViewServiceMarshal setRemoteObject:forKey:]_block_invoke_2
#communications_failureHi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens -
A few months ago, while on the 3G network, my iPhone 3GS starting turning off randomly when I was using safari or an online app and the battery was somewhere around 5-20%. When this happened the only way to get the phone back on was by fully charging it which sometimes took a few hours even. It wasn't a big deal at the time because it was infrequent and while the phone was at a low battery %. However, in the past few months, around the time I upgraded to iOS 5.1 it started happened more and more often and at higher and higher battery percentages. It is now at a point where my phone shuts off every time I connect to the 3G network regardless of what my battery life is. I have called Rogers several times to complain about this and I have been told it is because of the battery for the most part but I don’t buy it; the problem has got to be more significant than the battery alone because I can listen to music and send texts at anytime and fully use the internet when I am connected to Wi-Fi. I more recently talked to someone in tech support from Rogers who said my phone cannot support the iOS 5.1 software and that is why it is crashing. They also asked if my phone was heating up more now than in the past and it is. They said this was further evidence that my phone was couldn't handle the new software and was basically on overload. I was told to the best solution was to "Back Up" my iPhone then do a full "Restore". Here is where my next problem comes along. I cannot "Restore" my iPhone without doing an upgrade and every time I attempt to "Upgrade & Restore" an error message pops up that says "There was a problem downloading the software for the iPhone "...". The network connection timed out/was reset. -Make sure your network settings are correct and your network connection is active, or try again later". I have followed all of the protocol that is readily available online to address this problem but still no success. I disabled my firewall and anti-virus programs, I have ensured my connection is active and stable, I have upgraded to the newest iTunes, I have uninstalled iTunes and all apple programs in the correct order then reinstalled iTunes, I have disabled my DNS cache. Nothing works.
If you have any advise whatsoever please share as it would be greatly appreciated.
ThanksI was actually able to upgrade to the newest software, iOS 5.1.1 without connecting to my computer/iTunes but rather directly through my phone when I was home on Wi-Fi. After the upgrade I plugged my phone into a different USB port at the back of my computer and was able to do a full restore. I really don't think the USB port had anything to do with it because I use the same front USB port all the time with my external hard drive and other devices wuth no problems at all; regardless of what the actual solution was, I am now able to connect to iTunes and upgrade/restore without any problems so that half of my problem is resolved.
I have yet to leave my house since doing the upgrade/restore so I am not sure if the problem with my phone crashing when I use the interent on the 3G is still an issue. I will test it today and tomorrow and give you an update.
Thanks -
When I use the
"dsmgmt" command to add a user to the local administrators account of a RODC I can actually see the user when I use the "Show Role Administrators" parameter. However, I can't see the members of the
group added to the "Managed By" tab of the RODC object in AD. Even though, the users added using
"dsmgmt" and by the "Managed By" tab can all log in locally and have admin rights to the RODC. Are there any differences between these two ways of adding users to the local administrators account?Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
How to download latest version to ipad?
got an ipad as a gift and tried to video skype with a group of folks.. I could only hear them and not see them... someone said I needed to upgrade.. On my ipad in apps, it says all apps up to date.. anyone have a solution please??? thankyou..
-
Multi-language support for built-in dictionary
Hi, Could anyone tell me if the built-in dictionary in iOS supports multi-language environment? Say, for now the dictionary explains an English word in English, is it possible to have it explain German or French words in English? Thanks in advance!
-
New tab doesn't open as my home page
I have Google as my home page. When I click the + button to open a new tab, it doesn't load my home page.
-
Purchase Query through Control Account - Correction
Dear Experts, Can anybody help me to correct the below query, where I need to incorporate the Control Account (OINV-Ctlaccount) as one another selection parameter in the existing one. Try this :- DECLARE @StartDate DATETIME, @EndD
-
Hi Folks, Just wanna check with you guys on the mailbox quota. I know that it can be set per user basis like below mailQuota: 2000000 -> 2MB Is it possible to set per domain basis say 5MB. So all users will have only 5MB set for mailbox account on th