Error comes while save a smart style

Hi all
While i am creating a smart style message comes 'Object can only be created in SAP package' .Then after creating a smrt style then when i am trying to save this smart style the error message comes like that 'SAP object [[style name]] cannot be assigned to package [[package name]] .
Can any one help me ...
Regards
Rajesh

Hi,
For the problem with error: 'SAP object [[style name]] cannot be assigned to package [[package name]], please apply the following SAP note:
1370036 - Which package should be used for official SAP device type
Regards,
Aidan

Similar Messages

Error comming while transportation of BW realted request

Hi All,
Currently i am working on SCM 5.0 Server
      I have created all the data flow process i.e Data Source,Info Package,Info Source,Info Area,Info Cube,Transformation & data Transfer Process for DP Planning Area for taking backup of data in Client 221 i.e DC1.
While creating the all above configuration sysytem asked for Request,so we created request which we want to transport in Client 421 i.e quality server QC1.
   Then we have transported all above request to QC1 421.But when i am looking for all the data flow process in QC1.System having only Data Source,Info Source,Info cube & transformation.But there is no Info Pakage & DTP.When i double click the Data Source System shows Error "Source system DC1CLNT221 does not exist".Only Info Cube & info Source are in active mode & other are in Inactive mode.
So we again created Request manually & agian tried to transport but system showing following Error
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Source system DC1CLNT221 does not exist
Start of the after-import method RS_ISIP_AFTER_IMPORT for object type(s) ISIP (Activation Mode)
Source system DC1CLNT221 does not exist; InfoPackage ZPAK_49IDN8E8V1ELQV2O6QONO4GLS deleted
Start of the after-import method RS_ISIP_AFTER_IMPORT for object type(s) ISIP (Delete Mode)
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Delete Mode)
Source system DC1CLNT221 does not exist
Errors occurred during post-handling RS_AFTER_IMPORT for ISIP L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request DC1K900265 completed
     Start of subsequent processing ... 20080702181727
     End of subsequent processing... 20080702181728
Execute reports for change/transport request: DC1K900265
Reports for change/transport request DC1K900265 have been executed
     Start of................ 20080702181728
     End of.................. 20080702181728
Execution of programs after import (XPRA)
End date and time : 20080702181728
Ended with return code: ===> 8 <===
Wat could be the reason? How i resolve this issue? Kindly suggest the possible solution.
Thanks in Advance !
Sujay

Hi Sujay,
You are to maintain the conversion of source system name after transport in QC1 421 before transport your request.
Ts RSLGMP or in customising under BIW/Trasport Settings/Change source system name after transport.
'Original Source System' - DC1CLNT221
'Target Source System'   - QC1CLNT421
Regards,
Alexander

Configuring Active Dataguard- Error comes while taking rman backup

Hi All,
I'm following this( http://wiki.oracle.com/page/11gR2+Data+Guard+Setup+project+Part5 ) article to configure a active dataguard. And i have successfully completed lot of steps up to now.
But im getting an error when i'm trying to complete the step 10 under chapter 5 (creating stand by)
step 10
10- OK, here we go, log into RMAN and run the following script. This script will create the standby database
At the command prompt type in rman
when rman launches connect to the target and auxiliary databases
connect target sys/michael@MS112DGP
connect auxiliary sys/michael@MS112DGS
here is my one... my primary db is called as dgp and my stand by is dgs
this is the error im getting... :(
[oracle@dgs ~]$ rman
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Apr 23 09:54:40 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target sys/oracle@dgp
connected to target database: DGP (DBID=1555810211)
RMAN> connect auxiliary sys/oracle@dgs
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
RMAN>
can anybody please help me to sort this out. once i solved this i can complete my first dataguard :)
Thanks in advance
Max

Hello Sb,
[oracle@dgs admin]$ lsnrctl stop
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:02
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
[oracle@dgs admin]$ mv listener.ora listener.ora_bkp
[oracle@dgs admin]$ ll
total 16
-rw-r--r-- 1 oracle oinstall 471 Apr 17 09:25 listener.ora_bkp
drwxr-xr-x 2 oracle oinstall 4096 Apr 15 14:18 samples
-rw-r--r-- 1 oracle oinstall 187 May 9 2007 shrept.lst
-rw-r--r-- 1 oracle oinstall 506 Apr 17 09:07 tnsnames.ora
[oracle@dgs admin]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:26
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Log messages written to /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:37
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 10 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$
Thanks,
Max

PermGen space: out of memmory error comming while running the jboss server on ATG10.2

Hi Guys,
I am getting out of memmory error while running the jboss server on ATG10.2.
using jboss-eap.5.1 + atg 10.2 + jdk1_6_28 version + mysql.
edited the run.conf file with below given settings in atg10.2 documentation. But still getting the issue.
JAVA_OPTS="-server -Xms2048m -Xmx3072m -XX:MaxPermSize=768m
-XX:MaxNewSize=768m -Dsun.rmi.dgc.server.gcInterval=3600000 –
Dsun.rmi.client.gcInterval=3600000"
Pelase suggest if you have any ideas.
Thank you.

Hi,
Please use recommended settings:
JAVA_OPTS="-server -Xms512m -Xmx1024m -XX:MaxPermSize=512m
-XX:MaxNewSize=512m -Dsun.rmi.dgc.server.gcInterval=3600000 –
Dsun.rmi.client.gcInterval=3600000"
This will work fine.
Regards,
RahulV

Error come while extracting data using DB Connect

Hi Exports!!!
We are not getting data in data target while fetching data from DB Conenct Exptraction method
We have created Source systme for DB Conenct . We are able to see data if we right click and select /EDIT database and display database content.
We can see error in Monitor::
[[No IDocs created; Database system
Diagnosis
No IDocs were created. The IDocs are created in BW with database systems as source systems. Since no IDocs were created, a short dump in BW probably occurred.
System response
Procedure
Check the short dumps in BW.]]
Please suggest !!!

Hi,
so your connection is fine, in RSDBC you can see data, right? You generated your DataSource and then assigned source system DS to ISource.
What is your External DB system? If it is MSSQL then do NOT use the user sa for the connection. Create a "BWUser" in your MSSQL with all adequate rights.
Then create a view with this user.
CREATE VIEW BWUser.MYVIEW AS SELECT * FROM dbo.TABLE.
Generate you DSource on BWUser.MYVIEW instead of on a dbo.* object.
This should work it out.
Also remind that you fields names have to cope with the DCOnnect restrictions (upper case, no / only alphanumeric chars)
Note that there is no IDOC transfer between both systems thus the error msg is just because the source didn't not bring any data to BW; the msg is misleading you...
let me know
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

Error comes while adding a ADF BC/JSP portlet

Hello all,
I built a portlet using ADF BC & JSP,the Provider's Test Page showed successfully.
1)I created an empty project;
2)I created an Business Component from Tables;
3)I created a portlet using Oracle PDK portlet wizard--in the same project which the Business Component from Tables exist.
4)I create error.jsp and made the code <%=exception.toString()%>,and add the <%@ page errorPage="error.jsp"%> in the portlet's showPage;
5)I drag and drop the tableView form DataControl Panel;
6)I make deployment profiles--war file,and deploy the portlet to a standalone OC4J;
7)Registed to Oracle Portal;
8)In the Portal,when I added the portlet to a new page,the portlet showed nothing but the following message:
java.lang.NoClassDefFoundError: oracle/jbo/mom/PropertyNameValueDef
what's wrong? Could anybody give me a help?
Thanks~

Hello,
Have you deployed the ADF Runtime in the OC4J instance you are using ?
See Jdeveloper Menu: Tools/ ADF Runtime Installer.
Regards
Tugdual Grall

Error comes while using calender in Edit Page? BUG ???

Hi
I am using Jdeveloper 9.0.2. My project is a BC4J project. I have created some default Browse and Edit Form on a View Object. In the Edit page when I am entering date using the calender I am getting the following error:
" Error Message: No rows available for editing. "
But if I am giving date manually, everything is fine.
Please help me.
- Arvind

Repost

Error comes while running runInstaller to install clusterware

Dear All,
I am installing clusterware 10gr2 on Oracle Enterprise Linux.
After complete all the task when i run Installer it ends up with the following message/error:
'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-05-16_04-24-28PM. Please wait ...[oracle@oraclecl1 ~]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-05-16_04-24-28PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-05-16_04-24-28PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151) at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Kindly help me remove this error.
Regards,
Imran

I have to install clusterware on oracle enterprise linux 4.
have installed the following rpms
xorg-x11-libs-6.8.2-1.EL.13.6.i386.rpm \
xorg-x11-Mesa-libGL-6.8.2-1.EL.13.6.i386.rpm \
expat-1.95.7-4.i386.rpm \
fontconfig-2.2.3-7.i386.rpm \
freetype-2.1.9-1.i386.rpm \
zlib-1.2.1.2-1.i386.rpm
but when i install
rpm -Uvh xorg-x11-deprecated-libs-6.8.2-1.EL.13.6.i386.rpm \
it says lixX11.so.6 and libXext.so.6 is needed. I cant find these rpms in installation disk...
I think if i install rpm -Uvh xorg-x11-deprecated-libs-6.8.2-1.EL.13.6.i386.rpm setup will run to install clusterware...
Kindly help

Terminal License error comes while attempting RDC

Hi,
I have windows server 2008r2 std and have 5 terminal licenses to connect server through RDP from the internet. Now since a week some desktop PC's are able to connect server and some desktop pc's are not connecting and saying "The remote
session was disconnected because there are no Terminal Server LIcense server available to provie a license. Contact your server adiminstrator"

Hi,
1. What type of RDS CALs do you own, Per Device or Per User?
2. In RD Session Host Configuration (tsconfig.msc), have you set the Licensing mode to match the type of RDS CALs you own?
3. In RD Session Host Configuration, have you Specified the name of your RD Licensing server?
4. Have you installed RD Licensing Role Service?
5. Have you Activated your server and Installed your purchased RDS CALs in RD Licensing Manger (licmgr.exe)?
-TP

"An error occurred while trying to save your photo library..."

Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

Error while Running sample Smart Sync Application

Hi all,
I followed step that has been given on mdk 2.5 tool kit <b>to create a Sample Smart Sync application which donwloads the short text and country code</b> with SyncBo,metadata xml and MCD,
while running a smart sync on mi client i am getting an error..................
<b>Error: 500
Location: /me/jsp/home/home.jsp
Internal Servlet Error:
javax.servlet.ServletException
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:461)
     at jsp.home.home._jspService(Unknown Source)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.dispatchRequest(AbstractMEHttpServlet.java:573)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:343)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:164)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Unknown Source)
Root cause:
java.lang.NullPointerException
     at jsp.home.home._jspService(Unknown Source)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.dispatchRequest(AbstractMEHttpServlet.java:573)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:343)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:164)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Unknown Source)</b>
please help me on this issue................
regards,
Venugopal

HI Karthick,
Thanks for your reply.
while exporting the application it is running properly on NWDS platform as well in Eclipse platform but not in mi client.
i am sure that,
<b>MCD Name = Application Name = War file which is MDK_TUTORIAL_SYNC</b>
Below is my Meta XML file:
<b><?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="MDK_TUTORIAL_SYNC" version="250901">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED" />
<Property name="EN">LANGUAGE</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZNWW_EXM01" version="2" type="download" allowCreate="false" allowModify="false" allowDelete="false" reqDirectSync="false">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="LAND_TEXT" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
</TopStructure>
</SyncBO>
</MeRepApplication></b>
reffer the above xml file and please find if i miss any fields.
regards,
Venugopal.

IPhoto: An error occurred while trying to save your photo library.

"An error occurred while trying to save your photo library.
Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
Basically, the same issues as this thread:
http://discussions.apple.com/thread.jspa?threadID=1588998&tstart=0
I have tried the BatchMod with no luck. If it matters, this is on an external hard drive and I am the only user on this computer. Looking at the info of the library file, I have read/write/execute permissions and my group has read permissions only. I thought BatchMod would change these permissions but it doesn't seem to work.
Actually, I restarted my computer and it works now. But I am still worried it might happen again. Has anyone else encountered this problem?
Thanks.

Welcome to the Apple Discussions. If it's working now it could have been a one time hiccup. Do you backup your library on a regular basis? If not you definitely should.
If the library gets damaged/corrupted you won't lose your photos but can lose all of your organizational effort that you put into the library. If the external HD crashes then you will lose all.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

"An error occurred while trying to save..." Library

Perhaps it's something minor, but I had this message out of the blue with iPhoto:
"An error occurred while trying to save your photo library. Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library".
After that message I closed iPhoto, and just restarted my Mac. The message hasn't displayed again. So far I haven't found any error or "lost changes" in my library. Those two recommendations from the message are checked and OK. There's plenty of space, I can access my photos and everything seems OK.
I keep iPhoto running all the time even when my Mac is sleeping. It runs from an external HD.
Should I rebuild my library just in case, before my next full back up? I have a current backup of the dB Library (I use OT's Automator action). Should I restore it as well? Or just ignore that unusual warning? Ever since I use a managed library, it's the first time an error seems to occur.
Thanks.

Thanks. I have already purchased Library Manager from some time ago. I'll give it a try to its rebuilding funtion, even though it's a big copy to be made (my library is about 90GB).
Before that huge task, I'd like to point out some comments I've found in the iPLM help. It mentions a possible corruption of the AlbumData.xml file regarding keywords (invisible "null" characters on any keyword), and I have LOTS of keywords. I use Keyword Manager, by the way. That, and other considerations are listed for possible sources of an error.
Also, I found this thread regarding the same issue:
http://discussions.apple.com/thread.jspa?threadID=1588998&tstart=0
The link to arbysoft doesn't seem to work, by the way.
http://macchampion.com/arbysoft/
In that thread this was used as an alternative after unsuccessfully rebuilding with iPLM. Maybe can I try this easier-at-a-glance option first?
JJ

Error Message: "An error occurred while trying to save your photo library."

I am all of the sudden getting this error message while in iPhoto, seems to come up after I try to delete some photos:
"*An error occurred while trying to save your photo library.* Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
I have 83 GB of hard disk space available. Any help?

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I had been listen to itunes radio on my computer and now it comes up with the following message"An error occurred while contacting the radio tuning service. Check your internet connection, or try again later???? I have reset cache and it still isn't worki

I have been listening to iturnes radion on my computer for months. now i get an error.
"an error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have reset the cache but nothing seems to help. Any help???
55Annie

Somebody suggested clearing the Store cache. I don't know why that would affect the radio. Seems to have not worked for some, worked for a few or maybe they imagined it. Many other posts about this if you browse the forum.
This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times. You try to guess what is going on. Hasn't happened to me. Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
Complain to Apple:
http://www.apple.com/feedback/itunesapp.html
Oh, don't expect Apple to say anything about this -- that's not their style.

Error comes while save a smart style

Similar Messages

Maybe you are looking for