ERROR: Command Ignored, Configuration in progress...

Hi Everone,
When i type sh run on ASA 5520
it gives error
ERROR: Command Ignored, Configuration in progress...
Any fix other than reboot?
Regards
Mahesh

Hi Jouni,
Here is more info on the issue.
This ASA is acting as DHCP server for users.
Now it is not providing IP to the users.
Also users PC who have IP from ASA i am unable to ping their IP address.
First we thought it was bad cable from patch panel to user.
Then we unplug the failover cable from standby firewall after this i was able to run all the commands and users were
able to get the IP address from the ASA.
Seems it is synch issue between 2 ASA.
After this i put failover cable back to standby and we lost access to primary firewall and our internet was not working.
Then we shutdwon the standby ASA and reboot the Primary ASA then everything was back to normal.
Currently standby ASA is standalone and not connecting to anything.
When i power on the standby ASA all hardware looks ok and is up and running.
Regards
Mahesh
Message was edited by: mahesh parmar

Similar Messages

9iAS 1.0.2.2/Portal 3.0.9 - Installation Error at "Portal Configuration Assistant"

I was installing the iAS1.0.2.2 and at the Portal Configuration Assistant, at the 23% I received the following error:
"An unexpected error ocurred during the Install Process. Check the install.log ....."
(FYI this is the second time I try to install it and in both cases I received the same error at the same point, so I decided to ask for help)
At the end of the Install.log is the following:
=====================
STEP 7 : Installing WWC layer Components
INSTALL_ACTION : installWWC(): ..\..\bin\sqlplus portal30/portal30@<DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)HOST=administrator)(PORT=1521)))(CONNECT_DATA=(SID=virtual))) @..\..\portal30\admin\plsql\wwc\wwcinst.sql portal30 USERS TEMP wvinswwc.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted
=========================
I noticed during the installation, before the Configuration Assistant (aprox at 97%), the installation opened a DOS session and I could see some errors with some Indexes but I don't know in which Log are registered. maybe it can help to troubleshoot my above problem?
Operating System: NT4 SP6
Database: 8.1.7.0 standard edition
iAS 1.0.2.2 standard edition
both under the same machine
Let me know if there is any other info I can provide.
Tks in advance!

There has been some confusion around certification on SE over the past week. I want to clarify the situation.
We discovered an issue with the Portal on SE last week. We inadvertently used function based and bitmapped indexes (EE only features). This issue has been masked to date because the install proceeded normally after the errors were raised. In 3.0.9 we made the install more strict in that it will stop by default if it hits an unexpected error.
On further research, we have determined that these errors have little or no impact on the general functioning of the product and as such are maintaining the position that Portal 3.x is indeed certified on 8.1.7
Standard Edition.
There is unfortunately a necessary work around to the install issue (which we will rectify as soon as possible). In order to install on SE, you must execute the Oracle Portal Configuration Assistant (OPCA) from
the command line and specify the "verbose" mode (see next post). In this mode, the errors are ignored and the install proceeds appropriately.
Regards,
The Oracle9iAS Portal Development Team

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

BPM Configuration Error on Weblogic Configuration

Hi,
I try to configure BPM Directory and always get error on wlst.sh command
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class: weblogic.jdbcx.oracle.OracleDataSource
My system spec:
- Solaris SPARC 64
- Weblogic 10.3.0.0 using JRockit 1.6.0_16
- BPM 10gR3
The configuration error in weblogic configuration.
Really need help here..
Thanks
Regards,
Eric Wijaya

Hi Eric,
Just checking: Are you using BPM 10.3.2?
Do you mean the BPM Directory Configuration?Yes, I'm talking about the directory configuration and the engine configuration too.
I've configure the BPM Directory to use BPM's Oracle Driver Version:10,11 which is selected by default by the BPM Configuration Wizard but still got the jdbc driver error. If you are using 10.3.2, you will see that there is another driver called: "Oracle Driver Version:10,11" (without BPM!!). You must use that driver. (if you install the latest 10.3.2 HF, that driver is the default one).
If you don't have that driver, then you are using an older version than 10.3.2. Please migrate to 10.3.2.
Hope this helps,
Ariel

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

adobeamatuer
Thanks for the reply.
Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
Please update us on your progress when you get a chance.
Best wishes
Thanks.
ATR
Add On...spelling correct 12 03 2014.

Oracle R12 Installation Error - Validate System Configuration

Hello,
I was doing the oracle apps R12 installation and got this error
=======================
Validate System Configuration
The post-install check inspects your system for a complete installation.
The list below shows the tests that were performed and the results.
Click on the test icon for details.
One or more of the post-install tests did not succeed for this:
Database Availability
HTTP
Virtual Directory
Login page
Configuration Upload
Help page
JSP
=======================
I’ve checked the details which are listed below.
Please help me in solving the issue :(
Configuration Upload
uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
Database Availability
command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : TEST
PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Help Page
checking URL = http://erp.tez.co.in:8009/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
HTTP
checking URL = http://erp.tez.co.in:8009
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi,
I think my linux was corrupted :(
I've done fresh linux installation and after that the R12 installation is complete without any issues :D
Thanks for you help Hussein Sir

Error Exception in AppMerge flows' progression when deploying ear file

Trying to deploy an EAR file containing EJBs, JMS and JDBC modules to WebLogic 10.3.3 via the Admin Console. Getting the following list of errors, which display in the console:
Error Unable to access the selected application.
Error Exception in AppMerge flows' progression
Error Exception in AppMerge flows' progression
Error '/' expected a valid beginning name character
Error '/' expected a valid beginning name character
i'm unable to find any deployment log files that might tell me what exactly is producing the above-listed errors so they are all I have to go on....
Anyone have any hints or ideas as to what might be going on?

Hi Brayn,
With *"App Merge Flows Error"* One thing is clear that there is something wrong with the Module Deployment descriptors inside your Application. We need to find that out first which XML file is corrupted. As the Log which u have pasted is not having much details in it...so u can try one thing may be we will get something new...
Step1). Open a Command prompt or Shell Prompt and then (For Windows Based OS) run “setWLSEnv.cmd”
For Unix Based OS:
run the “setWLSEnv.sh” by adding two DOTs separated by a single space …..before the actual script like following : (use ‘cd’ command to move inside the /wlserver_10.3/server/bin) then run the following command….
. ./setWLSEnv.sh
Note: The first DOT represents that set the Environment in the current Shell, AND the second ./ represents execute the script from the current directory.
Step2). Verify that the Classpath is Set properly or not: (for WINDOWS: echo %CLASSPATH%)
echo $CLASSPATH
Step3). In the same command Prompt Move in the directory where u have placed your EAR Application and then run the following WebLogic Utility to generate the New Deployment descriptors...
java weblogic.DDConverter -d . YourEarApplication.ear

It will read the EAR file and outside of the EAR application it will generate the fresh XML files.
NOTE: the actual use of weblogic.DDConverter tool is not intended to debug the XML content issues....it is actually used to generate the Old Deployment descriptors to the current WebLogic Version Deployment Descriptors......But I have many times used it to see if there is any issue with the XML descriptors...Because sometimes While converting the Deployment descriptors it throws the Error ... Pointing to the incorrect XML file....So may be it will be useful for u as well..to identify which XML file is corrupted.

If you find any XML which is wrong please post that XML file sothat we can see what's the issue with that.
Thanks
Jay SenSharma
http://weblogic-wonders.com/weblogic/ (WebLogic Wonders Are Here)

Error in TMS configuration

Hi All,
Our landscape is SCD (Dev) --> SCQ (Test) --> SCP (Prod), SCD being the domain controller.
We just installed SCQ. I configured STMS and replaced SCQ virtual system with actual system.
Now, when I execute connection test (from TX STMS) in system SCQ by selecting SCD i.e. is STMS --> Systems overview I select SCD and execute connection test.
I get an error,
Command Start TMS_CI_START_LOCAL_SERVI
Service Communication Interface
Start    Online
Function TMS_CI_START_LOCAL_SERVICE
Message SYSTEM_ACCESS_DENIED
As a result, my TMS config remains inconsistant.
The RFCs are working fine in both directions. When I execute same test from SCD to SCQ, by logging in to SCD, it works fine.
As soon as I configure STMS in SCQ and execute the connection test, a lot of dialog WPs get occupied by TMSADM user and keep updating TMSALOG table and selecting from TMSMCONF and TMSCSYS.
This also starts filling up the /usr/sap/SCQ/DVEBMGS00/data/stat file vigorously.
The contents of the TMSALOG table are,
00000003 SCQ        091814SCQTMS_CI_START_LOCAL_SERV DOMAIN_SCD SCQ        000    CI         TMS_CI_START_LOCAL_SERVICE     SYSTEM_ACCESS_DENIED           E
00000004 SCQ        091814SCQTMS_ALT_LOG_EXCEPTION   DOMAIN_SCD SCQ        000    ALT        TMS_ALT_LOG_EXCEPTION          OK
Already Tried,
1. Reconfiguring STMS in both SCQ and SCD.
2. Checking permissions of trans and other dirs and entries in hosts and services files on both SCQ and SCD.
3. Applying BASIS SP packs till 14.
4. Upgrading the SAP Kernel to 147.
Pls help.
Regards,
Kiran Pol

Hi Khalid,
Thanks for your reply.
I have already maintained the FQDNs in hosts file and servers can ping each with both hostnames and IPs.
Also, the RFCs (created automatically during TMS config.) are working fine in both the direction.
But although my RFCs are working, I get this TMS_CI_START_LOCAL_SERVICE and SYSTEM_ACCESS_DENIED errors while I try to check system SCD (connection check, Trans dir check..etc) by logging in to SCQ.
However, the checks are successfull when I login to SCD (domain controller) and try to check SCQ.
Any more suggetions will be appriciated.
Regards,
Kiran

Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services

Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
Georgi

Here's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc.

ERROR INSTALLING OC4J CONFIGURATION FILES

Hi,
Steps:
1. Downloaded Oracle11g Rel2 from download.oracle
2.Installed Software only option and completed installation on my laptop Windows7 ultimate. Selected Enterprise Version, unchecked OLAP,DATA MINING.
Error message during installation, some files missing .jar files. I have opted to ignore and continue and finally got success installation message.
3.Configured DB using DBCA.
4.Able to connect as SYS, SYSTEM.
Problem.
I tried to reconfigure DB using DBCA for OEM, received the msg
ERROR INSTALLING OC4J CONFIGURATION FILES. The summary error log is here. Appreciate any help.
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMConfig perform
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
thanks
Ram

Hi,
Seems you have not extracted downloaded zip files into same directory. In that case you get error like
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup12.jar (A file or directory in the path name does not exist.)
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup5.jar (A file or directory in the path name does not exist.)
Also after installation dbca will throw error.
Try the below
For AIX platform:
unzip in the same folder
$ mkdir 1120
$ mv aix.ppc64_11g_database_1of2.zip 1120
$ mv aix.ppc64_11g_database_2of2.zip 1120
$ cd 1120
$ unzip aix.ppc64_11g_database_1of2.zip
$ unzip aix.ppc64_11g_database_2of2.zip
$ cd database
$ ./runInstaller
This is true for all platforms on which you get two .zip files to download
For Windows 64 bit example on 11.2.0.1 you can do the following :
- create a directory C:\tmp\1120
- copy winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zip under C:\tmp\1120
- unzip winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zipunder C:\tmp\1120
Thanks,
Krishna

SRM 5.0 [ReminderManagerImpl] Error: No System configuration found, please

Dear All,
I'm getting this error in the log files every time any an error pops-up.
[ReminderManagerImpl] Error: No System configuration found, please configure the system first
SRM is working ok, not great on my machine.
any ideas plz share.
Thanks in advance.
Cheers:
Amar

Error # 3: Database connection pool related
13:13:19,372 ERROR [ContextLoader] Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'messageSource' defined in ServletContext resource [WEB-INF/application-context.xml]: BeanPostProcessor before instantiation of bean failed; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'DataSourceAdvisor' defined in ServletContext resource [WEB-INF/dataaccess-context.xml]: Cannot create inner bean 'org.springframework.aop.support.JdkRegexpMethodPointcut#1295fe8' of type [org.springframework.aop.support.JdkRegexpMethodPointcut] while setting bean property 'pointcut'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'org.springframework.aop.support.JdkRegexpMethodPointcut#1295fe8' defined in ServletContext resource [WEB-INF/dataaccess-context.xml]: BeanPostProcessor before instantiation of bean failed; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'businessUnitServiceAuditBusinessUnitAdvisor' defined in ServletContext resource [WEB-INF/rbacx-audit-context.xml]: Cannot create inner bean 'businessUnitServiceAuditAfterReturningAdvice' of type [com.vaau.rbacx.rbacxaudit.aop.businessunitserviceaudit.BusinessUnitServiceAuditAfterReturningAdvice] while setting bean property 'advice'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'businessUnitServiceAuditAfterReturningAdvice' defined in ServletContext resource [WEB-INF/rbacx-audit-context.xml]: Cannot resolve reference to bean 'daoAuditLogger' while setting bean property 'auditLogger'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'daoAuditLogger' defined in ServletContext resource [WEB-INF/rbacx-audit-context.xml]: BeanPostProcessor before instantiation of bean failed; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'indexGlobalUserGlobalUserUpdateAdvisor' defined in ServletContext resource [WEB-INF/search-context.xml]: Cannot create inner bean 'com.vaau.rbacx.search.aop.IndexAdvise#1958cc2' of type [com.vaau.rbacx.search.aop.IndexAdvise] while setting bean property 'advice'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'com.vaau.rbacx.search.aop.IndexAdvise#1958cc2' defined in ServletContext resource [WEB-INF/search-context.xml]: Cannot resolve reference to bean 'ftSearchProvider' while setting bean property 'searchProvider'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'ftSearchProvider' defined in ServletContext resource [WEB-INF/search-context.xml]: Cannot resolve reference to bean 'rbacxSchedulerService' while setting bean property 'rbacxSchedulerService'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'rbacxSchedulerService' defined in ServletContext resource [WEB-INF/scheduling-context.xml]: Cannot resolve reference to bean 'vaauSchedulerManager' while setting bean property 'vaauSchedulerManager'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'vaauSchedulerManager' defined in ServletContext resource [WEB-INF/scheduling-context.xml]: Cannot resolve reference to bean 'quartzSchedulerProvider' while setting bean property 'schedulerProvider'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'quartzSchedulerProvider' defined in ServletContext resource [WEB-INF/scheduling-context.xml]: Cannot resolve reference to bean 'quartzSchedulerFactoryBean' while setting bean property 'quartzScheduler'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'quartzSchedulerFactoryBean' defined in ServletContext resource [WEB-INF/scheduling-context.xml]: Cannot create inner bean 'quartzSchedulerFactoryBeanTarget' of type [org.springframework.scheduling.quartz.SchedulerFactoryBean] while setting bean property 'target'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'quartzSchedulerFactoryBeanTarget' defined in ServletContext resource [WEB-INF/scheduling-context.xml]: Invocation of init method failed; nested exception is org.quartz.SchedulerConfigException: Failure occured during job recovery. [See nested exception: org.quartz.JobPersistenceException: Failed to obtain DB connection from data source 'springNonTxDataSource.quartzSchedulerFactoryBeanTarget': java.sql.SQLException: Connections could not be acquired from the underlying database! [See nested exception: java.sql.SQLException: Connections could not be acquired from the underlying database!]]
Caused by: org.quartz.JobPersistenceException: Failed to obtain DB connection from data source 'springNonTxDataSource.quartzSchedulerFactoryBeanTarget': java.sql.SQLException: Connections could not be acquired from the underlying database! [See nested exception: java.sql.SQLException: Connections could not be acquired from the underlying database!]
 at org.quartz.impl.jdbcjobstore.JobStoreCMT.getNonManagedTXConnection(JobStoreCMT.java:167)
 ... 196 more
Caused by: java.sql.SQLException: Connections could not be acquired from the underlying database!
 at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106)
 at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:529)
Caused by: com.mchange.v2.resourcepool.CannotAcquireResourceException: A ResourcePool could not acquire a resource from its primary factory or source.
........... at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525)
Resolution:
This was a tough one. I referred many posts related to c3p0 in the spring / hibernate community, but none of the options resolved this in my environment. I even changed the app server to Glassfish 2.1 from Apache Tomcat, but to no avail.
Upon some experimenting with the MySQL database instance created by the default script (bundled with Sun RoleManager), I found that the userID used to connect to the DB did not have privileges to perform any operation. I gave permissions to the default DB user id and the error got resolved.
# mysql -u root --password
<Enter the pwd for DB's root user>
mysql> use mysql;
mysql> desc user;
mysql> select *** from user where user='rbacxservice';
The results of the above command showed that the user 'rbacxservice' did not have any privileges even to select rows. I granted the privileges (using the commands given below). For some reason, three instances of the user were available in the DB. I granted privileges for this user in all the three instances.
mysql> GRANT ALL PRIVILEGES ON ***.*** TO 'rbacxservice'@'%';
mysql> GRANT ALL PRIVILEGES ON ***.*** TO 'rbacxservice'@'localhost';
mysql> GRANT ALL PRIVILEGES ON ***.*** TO 'rbacxservice'@'myserver';

Error: DF2A Ignoring this request...

I've been having a problem with my PO since upgrading to 8.0.2 hp1. (NetWare)
The PO will throw the following error into the Administrator email and the server will crash with no abend information. Just hard lock with a black screen:
Error: DF2A Ignoring this request because it is a duplicate of one already in progress
Ideas?

Nope. It didn't make a difference. But, this last time it actually left an abend.log file. Here's an excerpt:
===========
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.08
Server NW370 halted Tuesday, February 8, 2011 8:35:33.531 am
Abend 3 on P00: Server-5.70.08: Machine Check Processor Exception (Error code 22000800)
Registers:
CS = 0008 DS = 0023 ES = 0023 FS = 0023 GS = 0023 SS = 0010
EAX = 00000000 EBX = 00000000 ECX = 00000000 EDX = 5D54E008
ESI = 5D54E008 EDI = 93EB83DC EBP = 93EB83E4 ESP = 93EB83AC
EIP = 003464E8 FLAGS = 00010046
003464E8 F3A4 REP MOVSB
EIP in SERVER.NLM at code start +0013C6A8h
The violation occurred while processing the following instruction:
003464E8 F3A4 REP MOVSB
003464EA 83FB08 CMP EBX, 00000008
003464ED 7569 JNZ 00346558
003464EF F6451C08 TEST byte ptr [EBP+1C], 08
003464F3 744F JZ 00346544
003464F5 68E40D4200 PUSH 00420DE4
003464FA 8B5528 MOV EDX, [EBP+28]
003464FD 52 PUSH EDX
003464FE E815B8DCFF CALL LOADER.NLM|strcat
00346503 83C408 ADD ESP, 00000008
Running process: Interrupt service routine (nested count 2)
Interrupted process: GWCHK-GWPO-Worker_4 Process
Thread Owned by NLM: GWPOA.NLM
Stack pointer: 93EB704C
OS Stack limit: 93EAD3E0
Scheduling priority: 67371008
Wait state: 3030070 Yielded CPU
Stack: --34354435 ?
--34303045 ?
--706D0020 ?
--64646120 ?
--73736572 ?
--93000A0D ?
002E3170 (SERVER.NLM|OutputToString+CA0)
--93EB83E0 ?
--93EB83DC ?
--FBF21B4F ?
--5D54E004 ?
0022FEB3 (SERVER.NLM|HarvestStackPages+24F)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
00339D19 (SERVER.NLM|WriteAbendLog+59)
--93EB8640 ?
--FBF21B3F ?
--00000080 (LOADER.NLM|KernelAddressSpace+80)
--9A2029C4 ?
0033A1CE (SERVER.NLM|LogAbendToFile+47E)
--5D54E004 ?
--00000100 (LOADER.NLM|KernelAddressSpace+100)
--00000009 (LOADER.NLM|KernelAddressSpace+9)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
-0055C91C (SERVER.NLM|AbendLogBuffer+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--FE59B9C0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--93EB83C0 ?
--FFFFFFFF ?
--00000046 (LOADER.NLM|KernelAddressSpace+46)
--00000008 (LOADER.NLM|KernelAddressSpace+8)
--00000023 (LOADER.NLM|KernelAddressSpace+23)
--00029000 (LOADER.NLM|BIOSDriveCount+EE90)
002E39F8 (SERVER.NLM|OutputToString+1528)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--FE00B0A0 (LOADER.NLM|OSAllocMemory+B0A0)
002E39F8 (SERVER.NLM|OutputToString+1528)
--0000000F (LOADER.NLM|KernelAddressSpace+F)
-0043FF24 (SERVER.NLM|faultScreenStructure+0)
--00000019 (LOADER.NLM|KernelAddressSpace+19)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000019 (LOADER.NLM|KernelAddressSpace+19)
--766F4E2A ?
--206C6C65 ?
--6E65704F ?
--746E4520 ?
--72707265 ?
--20657369 ?
--76726553 ?
--202C7265 ?
--5774654E ?
--20657261 ?
--FB352E36 ?
--FBF1D9E9 ?
-0043FF24 (SERVER.NLM|faultScreenStructure+0)
-0043FF24 (SERVER.NLM|faultScreenStructure+0)
--00000019 (LOADER.NLM|KernelAddressSpace+19)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000019 (LOADER.NLM|KernelAddressSpace+19)
-0043FF24 (SERVER.NLM|faultScreenStructure+0)
--00000019 (LOADER.NLM|KernelAddressSpace+19)
0029D80C (SERVER.NLM|EventReport+B0)
-0042FE2C (SERVER.NLM|total_event_generated_counter+0)
--00000019 (LOADER.NLM|KernelAddressSpace+19)
--00000007 (LOADER.NLM|KernelAddressSpace+7)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
-0043FF24 (SERVER.NLM|faultScreenStructure+0)
--6F74634F ?
--20726562 ?
--32202C33 ?
--00383030 (SERVER.NLM|EndOfOSCode+FA56)
--00003600 (LOADER.NLM|KernelAddressSpace+3600)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000045 (LOADER.NLM|KernelAddressSpace+45)
--48435747 ?
--57472D4B ?
--572D4F50 ?
--656B726F ?
00345F72 (SERVER.NLM|DoDump+226)
-0055CA6E (SERVER.NLM|AbendLogBuffer+152)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000007 (LOADER.NLM|KernelAddressSpace+7)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
87916257 (LIBNSS.NLM|LB_memcpy+17)
--93C85240 ?
87916268 (LIBNSS.NLM|LB_memcpy+28)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000080 (LOADER.NLM|KernelAddressSpace+80)
--00000008 (LOADER.NLM|KernelAddressSpace+8)
--00000008 (LOADER.NLM|KernelAddressSpace+8)
-005096A0 (SERVER.NLM|OSAS+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--93EB8640 ?
00338897 (SERVER.NLM|HandleTheAbend+623)
===================

Error:AIP-18506: Configuration Builder rollback failed for configurations n

Hi All
While creating a deployement , i am getting below error,
please help me
Error:AIP-18506: Configuration Builder rollback failed for configurations null for business process null
regards
suni

Hi Anuj,
Thanks for your response, Now i getting a new error.
I am getting the below error, while i am deploying the configurations.
AIP-11016:SQL
please find the below errors
2009.07.29 at 06:38:54:371: B2BStarter thread: B2B - (DEBUG) B2BStarter - Current list is empty. Shutdown B2B
2009.07.29 at 06:38:54:372: B2BStarter thread: B2B - (DEBUG) B2BStarter - Shutdown B2B
2009.07.29 at 06:38:54:405: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Enter
2009.07.29 at 06:38:54:407: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Exit
2009.07.29 at 06:38:54:409: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown B2B server start
2009.07.29 at 06:38:54:464: Thread-18: BusinessLogicLayer - (ERROR) caught error: Closed Connection
2009.07.29 at 06:38:54:468: Thread-18: IP - (ERROR) java.sql.SQLException: Closed Connection
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
 at oracle.jdbc.driver.PhysicalConnection.rollback(PhysicalConnection.java:1259)
 at oracle.jdbc.OracleConnectionWrapper.rollback(OracleConnectionWrapper.java:90)
 at oracle.tip.repos.core.driver.CatalogDriver.disconnect(CatalogDriver.java:1662)
 at oracle.tip.repos.core.persistency.PersistencyService.disconnect(PersistencyService.java:578)
 at oracle.tip.buslogic.common.ExecutionContextImpl.disconnectService(ExecutionContextImpl.java:602)
 at oracle.tip.buslogic.common.ExecutionContextManager.closeLongRunningContext(ExecutionContextManager.java:511)
 at oracle.tip.adapter.b2b.data.B2BExecutionContext.close(B2BExecutionContext.java:208)
 at oracle.tip.adapter.b2b.data.DBContext.shutdown(DBContext.java:141)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:455)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:54:469: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end ignore exception
2009.07.29 at 06:38:54:471: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end
2009.07.29 at 06:38:55:426: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown Transport and App Transport
2009.07.29 at 06:38:55:428: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B Server shutdown
2009.07.29 at 06:40:25:439: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2009.07.29 at 06:40:25:573: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2009.07.29 at 06:40:25:767: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2009.07.29 at 06:40:25:873: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2009.07.29 at 06:40:26:079: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2009.07.29 at 06:40:26:149: B2BStarter thread: B2B - (DEBUG) XEngine is already started. So clear cached objects inside XEngine.
2009.07.29 at 06:40:26:181: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2009.07.29 at 06:40:26:185: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2009.07.29 at 06:40:26:189: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2009.07.29 at 06:40:26:195: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2009.07.29 at 06:40:26:198: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] EDI X12 over Generic Exchange
2009.07.29 at 06:40:26:204: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] RosettaNet over RNIF
2009.07.29 at 06:40:26:208: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2009.07.29 at 06:40:26:213: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2009.07.29 at 06:40:26:218: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2009.07.29 at 06:40:26:222: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2009.07.29 at 06:40:26:227: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over ebMS
2009.07.29 at 06:40:26:233: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over Internet
2009.07.29 at 06:40:26:239: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2009.07.29 at 06:40:26:245: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2009.07.29 at 06:40:26:690: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2009.07.29 at 06:40:27:125: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2009.07.29 at 06:40:27:126: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2009.07.29 at 06:40:27:130: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2009.07.29 at 06:40:27:133: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2009.07.29 at 06:40:27:135: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2009.07.29 at 06:40:27:137: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2009.07.29 at 06:40:27:141: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2009.07.29 at 06:40:27:143: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2009.07.29 at 06:40:27:145: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2009.07.29 at 06:40:27:148: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2009.07.29 at 06:40:27:150: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = DEBUG
2009.07.29 at 06:40:27:304: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting http://localhost
2009.07.29 at 06:40:27:309: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: http://localhost transport_callout_waittime = 30
port = 12001
PROTOCOL_ENDPOINT = null
2009.07.29 at 06:40:27:320: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Test_AS2_TransportServer < http > < Emerson >]
2009.07.29 at 06:40:27:797: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2009.07.29 at 06:40:27:865: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2009.07.29 at 06:40:27:869: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2009.07.29 at 06:40:27:875: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2009.07.29 at 06:40:27:879: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2009.07.29 at 06:40:27:883: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2009.07.29 at 06:40:29:214: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2009.07.29 at 06:40:29:297: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
2009.07.29 at 06:40:29:380: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
UI LOG:
2009.07.29 at 04:54:58:859: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
 at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:06:010: Thread-46: Repository - (ERROR) Error -: AIP-11015: Object does not exist 629FF62EB2D55C7BE04400144F873925-27-1-30
 at oracle.tip.repos.core.driver.CatalogDriver.getObject(CatalogDriver.java:759)
 at oracle.tip.repos.core.driver.AssociationList.get(AssociationList.java:70)
 at oracle.tip.buslogic.validation.rules.TradingPartnerCollectionRules.rule7_2(TradingPartnerCollectionRules.java:168)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1349)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1325)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validate(ModelValidationEngineImpl.java:1212)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjects(ModelValidationEngineImpl.java:296)
 at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjectsAgreement(ModelValidationEngineImpl.java:272)
 at oracle.tip.configuration.B2BConfigurationBuilder.run(B2BConfigurationBuilder.java:492)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:38:56:895: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
 at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:05:932: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02431: cannot disable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 107
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.repos.purge.PurgeManager.disableConstraints(PurgeManager.java:706)
 at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:836)
 at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
 at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:07:927: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 47
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.repos.purge.PurgeManager.enableConstraints(PurgeManager.java:728)
 at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:870)
 at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
 at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
 at java.lang.Thread.run(Thread.java:534)
2009.07.29 at 06:41:07:931: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: Purge op failed
2009.07.29 at 06:41:07:933: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: PurgeManager failed: Error -: AIP-11016: SQL error: java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
ORA-06512: at "B2B.IP_PURGE", line 47
ORA-06512: at line 1
2009.07.29 at 06:46:50:646: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
ORA-06512: at "B2B.IP_DEPLOY", line 3942
ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
ORA-06512: at line 1
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
 at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
 at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
 at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
 at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
 at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
 at java.lang.Thread.run(Thread.java:534)

ERROR: Command Ignored, Configuration in progress...

Similar Messages

Maybe you are looking for