Error comming while transportation of BW realted request

Hi All,
Currently i am working on SCM 5.0 Server
 I have created all the data flow process i.e Data Source,Info Package,Info Source,Info Area,Info Cube,Transformation & data Transfer Process for DP Planning Area for taking backup of data in Client 221 i.e DC1.
While creating the all above configuration sysytem asked for Request,so we created request which we want to transport in Client 421 i.e quality server QC1.
 Then we have transported all above request to QC1 421.But when i am looking for all the data flow process in QC1.System having only Data Source,Info Source,Info cube & transformation.But there is no Info Pakage & DTP.When i double click the Data Source System shows Error "Source system DC1CLNT221 does not exist".Only Info Cube & info Source are in active mode & other are in Inactive mode.
So we again created Request manually & agian tried to transport but system showing following Error
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Source system DC1CLNT221 does not exist
Start of the after-import method RS_ISIP_AFTER_IMPORT for object type(s) ISIP (Activation Mode)
Source system DC1CLNT221 does not exist; InfoPackage ZPAK_49IDN8E8V1ELQV2O6QONO4GLS deleted
Start of the after-import method RS_ISIP_AFTER_IMPORT for object type(s) ISIP (Delete Mode)
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Delete Mode)
Source system DC1CLNT221 does not exist
Errors occurred during post-handling RS_AFTER_IMPORT for ISIP L
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import methods of change/transport request DC1K900265 completed
 Start of subsequent processing ... 20080702181727
 End of subsequent processing... 20080702181728
Execute reports for change/transport request: DC1K900265
Reports for change/transport request DC1K900265 have been executed
 Start of................ 20080702181728
 End of.................. 20080702181728
Execution of programs after import (XPRA)
End date and time : 20080702181728
Ended with return code: ===> 8 <===
Wat could be the reason? How i resolve this issue? Kindly suggest the possible solution.
Thanks in Advance !
Sujay

Hi Sujay,
You are to maintain the conversion of source system name after transport in QC1 421 before transport your request.
Ts RSLGMP or in customising under BIW/Trasport Settings/Change source system name after transport.
'Original Source System' - DC1CLNT221
'Target Source System' - QC1CLNT421
Regards,
Alexander

Similar Messages

Error generated while transporting a request using TMS

Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

are you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

Error occurred while transporting request no. from development to productio

Hi Experts,
I have created a zreport (having a request number ) and activate the zreport ..
While transporting this request from development to production I face the error zreport is inactive .But when I check zreport in development server it is active ..
So how to transport this request.? Please help ..

Hello,
Can you ask the basis person to check the transport log and tell as to what error has occured. Most of the time transport fails if one of the dependent object fails to move. For example you have structure that you have used for table declaration in your prog. You moved the program but the structure was not moved. When Tranported , the program will result in an error and saying Struct not present.
What you can do immediately is to go on your prodcution server and try to do a syntax check of the program. I am sure it will show some error and from that you can carry out issue resolution. Also ask the basis person to hvae a look in to ur transport(he can see the same via STMS Tcode).
Regards
Saket Sharma

Error message while transporting the HR role

All
I was trying to move my HR role from Dev to QA.
I got the error message from transport and not sure about it.
Please let me know if you have any suggestions.
Invalid organizational level $ORGEH deleted from role Z_ALL_MODULES_EXCEPT_BASIS_HR
Invalid organizational level $ORGUNIT deleted from role Z_ALL_MODULES_EXCEPT_BASIS_HR
Errors occurred during post-handling
PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Post-import method PRGN_AFTER_IMP_ACTGROUP_ACGR completed for ACGR L, date and time: 20071011162942

Pranav,
You can see a list of all org levels in table USORG
There are standard SAP programs for adding or deleting org levels
PFCG_ORGFIELD_CREATE
PFCG_ORGFIELD_DELETE
If you want these fields to be maintained as org levels then you need to make sure that you have created them in all system.
If you don't want these fields as org levels then you can delete them using the program I listed above.

Re: Error occurred while transporting a request from dev to quality in BW

Hi BW Guru's,
I have done minor enhancement on one Master Data Data Source. The transports went fine in R/3 side. But in BW system it is giving an error message
There is no DataSource with these attributes
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
The errors affect the following components:
So this is the error message can any one help me how to move further analysis on this issue.
Thanks in Advance,
Venkat

Hi Venkat,
The problem is during Replicate if the datasource in the target system or during trasport of the InfoSource related.
In this second situation try to transport the Transfer Roules of the InfoSource with all related under/bottom objects, the system will include the Replicate of the DataSource.
Check also if the mapping of the sender and receiver system is correct: Tools --> Mapping of the sorce system...
Ciao.
Riccardo.

Error message while transporting SapScript to productive system

Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
R3TRFORMZMEDRUCKN was repaired in this system
Message no. TW 104
Diagnosis
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
System Response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
Cheers

Hi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod

Transporting error! While transporting Number Range Object

Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
Error Log Detail.
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
Anand

Hi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR.

Error Occured while transporting theme in to Netweaver Portal 7.3

Dear All,
We have installed fresh Portal 7.3 and we are trying to transport the theme from Netweaver portal 7.0 to 7.3, but i am getting error while importing the theme
Error Message:
" Cannot perform upgrade: Exception caught while upgrading: Image parameter "parPopInNoGradient" in browser section "default" is not available. This parameter should be used as target image parameter"
same theme is being imported to netweaver portal 7.0 but not in 7.3
Please help me ..........

Dear all,
we have the same problem, with a smiliar error message "Cannot perform upgrade: Exception caught while upgrading: Parameter "parTbsAnglePad2" in browser section "default" is not contained in parameterPool."
but we have installed the most current patches. Is there another possibility, how we can proceed with that error ?
Thanks and regards
Georg

Error comes while save a smart style

Hi all
While i am creating a smart style message comes 'Object can only be created in SAP package' .Then after creating a smrt style then when i am trying to save this smart style the error message comes like that 'SAP object [[style name]] cannot be assigned to package [[package name]] .
Can any one help me ...
Regards
Rajesh

Hi,
For the problem with error: 'SAP object [[style name]] cannot be assigned to package [[package name]], please apply the following SAP note:
1370036 - Which package should be used for official SAP device type
Regards,
Aidan

Configuring Active Dataguard- Error comes while taking rman backup

Hi All,
I'm following this( http://wiki.oracle.com/page/11gR2+Data+Guard+Setup+project+Part5 ) article to configure a active dataguard. And i have successfully completed lot of steps up to now.
But im getting an error when i'm trying to complete the step 10 under chapter 5 (creating stand by)
step 10
10- OK, here we go, log into RMAN and run the following script. This script will create the standby database
At the command prompt type in rman
when rman launches connect to the target and auxiliary databases
connect target sys/michael@MS112DGP
connect auxiliary sys/michael@MS112DGS
here is my one... my primary db is called as dgp and my stand by is dgs
this is the error im getting... :(
[oracle@dgs ~]$ rman
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Apr 23 09:54:40 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target sys/oracle@dgp
connected to target database: DGP (DBID=1555810211)
RMAN> connect auxiliary sys/oracle@dgs
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
RMAN>
can anybody please help me to sort this out. once i solved this i can complete my first dataguard :)
Thanks in advance
Max

Hello Sb,
[oracle@dgs admin]$ lsnrctl stop
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:02
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
[oracle@dgs admin]$ mv listener.ora listener.ora_bkp
[oracle@dgs admin]$ ll
total 16
-rw-r--r-- 1 oracle oinstall 471 Apr 17 09:25 listener.ora_bkp
drwxr-xr-x 2 oracle oinstall 4096 Apr 15 14:18 samples
-rw-r--r-- 1 oracle oinstall 187 May 9 2007 shrept.lst
-rw-r--r-- 1 oracle oinstall 506 Apr 17 09:07 tnsnames.ora
[oracle@dgs admin]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:26
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Log messages written to /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:37
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 10 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$
Thanks,
Max

PermGen space: out of memmory error comming while running the jboss server on ATG10.2

Hi Guys,
I am getting out of memmory error while running the jboss server on ATG10.2.
using jboss-eap.5.1 + atg 10.2 + jdk1_6_28 version + mysql.
edited the run.conf file with below given settings in atg10.2 documentation. But still getting the issue.
JAVA_OPTS="-server -Xms2048m -Xmx3072m -XX:MaxPermSize=768m
-XX:MaxNewSize=768m -Dsun.rmi.dgc.server.gcInterval=3600000 –
Dsun.rmi.client.gcInterval=3600000"
Pelase suggest if you have any ideas.
Thank you.

Hi,
Please use recommended settings:
JAVA_OPTS="-server -Xms512m -Xmx1024m -XX:MaxPermSize=512m
-XX:MaxNewSize=512m -Dsun.rmi.dgc.server.gcInterval=3600000 –
Dsun.rmi.client.gcInterval=3600000"
This will work fine.
Regards,
RahulV

Error come while extracting data using DB Connect

Hi Exports!!!
We are not getting data in data target while fetching data from DB Conenct Exptraction method
We have created Source systme for DB Conenct . We are able to see data if we right click and select /EDIT database and display database content.
We can see error in Monitor::
[[No IDocs created; Database system
Diagnosis
No IDocs were created. The IDocs are created in BW with database systems as source systems. Since no IDocs were created, a short dump in BW probably occurred.
System response
Procedure
Check the short dumps in BW.]]
Please suggest !!!

Hi,
so your connection is fine, in RSDBC you can see data, right? You generated your DataSource and then assigned source system DS to ISource.
What is your External DB system? If it is MSSQL then do NOT use the user sa for the connection. Create a "BWUser" in your MSSQL with all adequate rights.
Then create a view with this user.
CREATE VIEW BWUser.MYVIEW AS SELECT * FROM dbo.TABLE.
Generate you DSource on BWUser.MYVIEW instead of on a dbo.* object.
This should work it out.
Also remind that you fields names have to cope with the DCOnnect restrictions (upper case, no / only alphanumeric chars)
Note that there is no IDOC transfer between both systems thus the error msg is just because the source didn't not bring any data to BW; the msg is misleading you...
let me know
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

Error 12 While Transporting - Very Urgent

Hi all,
we are transporting objects from Development to Production and we are facing with an error,
Transfer structure 0UC_AKLASSE_TEXT_BB does not exist
Error RSAR 440 when handling objects with type R3TR ISTS
Start of the after-import method for object type R3TR ISIP (Activation Mode)
Start of the after-import method for object type R3TR ISIP (Delete Mode)
tried solving this problem by retransporting and by activating the structure in RS_TRANSTRU_ACTIVATE_ALL as mentioned in few posts, still we are getting the same error, unable to find out the root cause, please help me in solving this is very urgent.
Thanks in Advance,
Sai..,

Hi Edwin,
I have gone through that note already no much information available there its mentioned about service package 04 with is already available in our system, as per your second check point source system is mapped fine as we are able to transport remaining objects, actually now we started transporting objects in batch wise selecting few at a time and as its working fine with few, I dont think there is a problem with mapping. and one more error we are getting is
After transporting the objects in Production if we click infopackage,
Caution ! - The transfer method has changed
and in InfoPackage Processing level its showing
Update Data
ALE Inbox and InfoObject
ALE Inbox only
This is happening for few randomly and for others its fine with regualar processing PSA and then in InfoObject....,
Please look into this as well.
Thanks,
Sai.

Error comes while adding a ADF BC/JSP portlet

Hello all,
I built a portlet using ADF BC & JSP,the Provider's Test Page showed successfully.
1)I created an empty project;
2)I created an Business Component from Tables;
3)I created a portlet using Oracle PDK portlet wizard--in the same project which the Business Component from Tables exist.
4)I create error.jsp and made the code <%=exception.toString()%>,and add the <%@ page errorPage="error.jsp"%> in the portlet's showPage;
5)I drag and drop the tableView form DataControl Panel;
6)I make deployment profiles--war file,and deploy the portlet to a standalone OC4J;
7)Registed to Oracle Portal;
8)In the Portal,when I added the portlet to a new page,the portlet showed nothing but the following message:
java.lang.NoClassDefFoundError: oracle/jbo/mom/PropertyNameValueDef
what's wrong? Could anybody give me a help?
Thanks~

Hello,
Have you deployed the ADF Runtime in the OC4J instance you are using ?
See Jdeveloper Menu: Tools/ ADF Runtime Installer.
Regards
Tugdual Grall

Error comes while using calender in Edit Page? BUG ???

Hi
I am using Jdeveloper 9.0.2. My project is a BC4J project. I have created some default Browse and Edit Form on a View Object. In the Edit page when I am entering date using the calender I am getting the following error:
" Error Message: No rows available for editing. "
But if I am giving date manually, everything is fine.
Please help me.
- Arvind

Repost

Error comming while transportation of BW realted request

Similar Messages

Maybe you are looking for