Error Communicating with server

I've completed 4 projects and all went perfect without a hitch. On starting a new project, I created 3 new bins, audio, stills, video. When I clicked on capture, I get "error communicating with server. If this continues, contact adobe tech support." I can't figure out why I'm getting this message now. I haven't changed settings, using the same HD camcorder, etc.
Any suggestions?

Fast response ~ thanks. I'm using the same camcorder I used on all previous projects: SonyHandycam, so I know it's not the camcorder I've had no problem capturing in the past.
The project settings: General>Action Safe & Title Areas are default settings; 20 and 10: Video display format: Timecode: Audio display format: audio samples: Capture Format: DV. In the Sequence settings, they have to be factory default cause I've never changed any setting there.
Actually I'm really stumped cause I just finished my Grandson's graduation video on July 10 and Premier and Encore worked beautifully. Now, trying to do a family reunion video, I started new project, didn't change any settings, and when I clicked on Capture, it said "Capture Device Offline". I went back and replugged in the camcorder, and still nothing. Closed program, thought about it for awhile, then when I reopen, I get the "error communicating" in the resource panel.
I doubt this will help you but I'm hoping......

Similar Messages

Java.lang.InstantiationException: Error communicating with server:

Hello everybody, I am an easy Helloworld application, the deploy is fine, but when I execute the client it appears the next error:
java.lang.InstantiationException: Error communicating with server: Lookup error:
java.net.ConnectException: Connection refused: connect; nested exception is:
java.net.ConnectException: Connection refused: connect; nested exception
is:
javax.naming.NamingException: Lookup error: java.net.ConnectException: C
onnection refused: connect; nested exception is:
java.net.ConnectException: Connection refused: connect
at com.evermind.server.ApplicationClientContext.createContext(Applicatio
nClientContext.java:300)
at com.evermind.server.ApplicationClientInitialContextFactory.getInitial
Context(ApplicationClientInitialContextFactory.java:190)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at hello.HelloClient.main(HelloClient.java:33)
NamingException: Error reading application-client descriptor: Error communicatin
g with server: Lookup error: java.net.ConnectException: Connection refused: conn
ect; nested exception is:
java.net.ConnectException: Connection refused: connect; nested exception
is:
javax.naming.NamingException: Lookup error: java.net.ConnectException: C
onnection refused: connect; nested exception is:
java.net.ConnectException: Connection refused: connect
This is my application client:
// HelloClient.java
package hello;
import javax.ejb.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
import java.io.*;
import java.util.*;
import java.rmi.RemoteException;
* A simple client for accessing an EJB.
public class HelloClient
public static void main(String[] args)
System.out.println("client started...");
try {
// Initial context properties are set in the jndi.properties file
     Hashtable env = new Hashtable();
     env.put(Context.INITIAL_CONTEXT_FACTORY,"com.evermind.server.ApplicationClientInitialContextFactory");
     env.put(Context.PROVIDER_URL, "ormi://ecd11107.eadscasa.casa.corp:23791/helloworld");
     env.put(Context.SECURITY_PRINCIPAL, "admin");
     env.put(Context.SECURITY_CREDENTIALS, "123");
     Context context = new InitialContext(env);
// This for use with com.evermind.server.rmi.RMIInitialContextFactory
//Object homeObject = context.lookup("HelloBean");
// This is for use with com.evermind.server.ApplicationClientInitialContextFactory
Object homeObject = context.lookup("java:comp/env/Helloworld");
// Narrow the reference to HelloHome.
HelloHome home =
     (HelloHome) PortableRemoteObject.narrow(homeObject, HelloHome.class);
     System.out.println("hello home");
// Create remote object and narrow the reference to Hello.
Hello remote =
     (Hello) PortableRemoteObject.narrow(home.create(), Hello.class);
System.out.println(remote.sayHello("James Earl"));
} catch(NamingException e) {
System.err.println("NamingException: " + e.getMessage());
} catch(RemoteException e) {
System.err.println("RemoteException: " + e.getMessage());
} catch(CreateException e) {
System.err.println("FinderException: " + e.getMessage());
Can somebody helps me ???

Thank you, but don�t work well yet. I checked the files orion-application.xml & principals.xml in the directory C:\servOracle\oracle\j2ee\home\application-deployments\helloworld but the result is the same, when I run the client the next error appears:
NamingException: Lookup error: javax.naming.NoPermissionException: Not allowed to look up HelloBean, check the namespace-access tag setting in orion-application.xml for details; nested exception is:
javax.naming.NoPermissionException: Not allowed to look up HelloBean, check the namespace-access tag setting in orion-application.xml for details
This is my orion-application.xml
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//ORACLE//DTD OC4J Application runtime 9.04//EN" "http://xmlns.oracle.com/ias/dtds/orion-application-9_04.dtd">
<orion-application deployment-version="9.0.4.0.0" default-data-source="jdbc/OracleDS" treat-zero-as-null="true">
     <ejb-module remote="false" path="helloworld-ejb.jar" />
     <web-module id="helloworld-web" path="helloworld-web.war" />
     <client-module path="helloworld-client" deployment-time="fce4439997" auto-start="false" />
     <persistence path="persistence" />
     <principals path="principals.xml" />
     <jazn provider="XML" location="jazn-data.xml" />
     <log>
          <file path="application.log" />
     </log>
     <namespace-access>
          <read-access>
               <namespace-resource root="">
                    <security-role-mapping name="<jndi-user-role>">
                         <group name="users" />
                    </security-role-mapping>
               </namespace-resource>
          </read-access>
          <write-access>
               <namespace-resource root="">
                    <security-role-mapping name="<jndi-user-role>">
                         <group name="users" />
                    </security-role-mapping>
               </namespace-resource>
          </write-access>
     </namespace-access>
</orion-application>
And this is my principals.xml
<?xml version="1.0"?>
<!DOCTYPE principals PUBLIC "//ORACLE//DTD OC4J Principals 9.04//EN" "http://xmlns.oracle.com/ias/dtds/principals-9_04.dtd">
<principals>
     <groups>
          <group name="users">
               <description>users</description>
               <permission name="rmi:login" />
          </group>
          <group name="guests">
               <description>guests</description>
          </group>
          <group name="administrators">
               <description>administrators</description>
               <permission name="administration" />
          </group>
     </groups>
     <user username="admin" password="ADMIN">
          <description>The default administrator</description>
          <group-membership group="administrators" />
          <group-membership group="guests" />
          <group-membership group="users" />
     </user>
     <user username="SCOTT" password="TIGER">
          <description>no description</description>
          <group-membership group="users" />
          <group-membership group="administrators" />
     </user>
</principals>
Thanks in advance, please help me....

TREX error 5500: NameServer error: communication with server failed

Hello TREX Gurus,
After applying the latest NW 7.0 SPS18, TREX is no longer working. We are getting this error message in the TREX Administration.
"5500: NameServer error: communication with server failed;connection refused,location=sap01:37001"
Any helps is greatly appreciated,
Dave

we have same problem... did you find a solution?
best regards

Error communicating with server when trying to download a score in soundbooth cs5

I recently am getting back to some projects of mine. I went into Soundbooth CS5, and the Resource Central lists all of the scores and sound effects available to me. It says that i'm online, but then when I try to preview or download anything it gives me the following error:
"We're sorry, but there was an error communicating with the server. Please try again and if the problem persists, contact Adobe Technical Support (0) ioError: -1"
How do I get at the scores and sound effects? Is there a way I can download them so that I don't have to consult with the server anymore?

Soundbooth is dead and those servers are offline most likely. I haven't seen any official note on this, but that doesn't mean it couldn't be the case...
Mylenium

Can't activate on mac 10.7 Lion-Error communicating with server

I followed help to remove former install and manually install; tried to sign in and activate get same error as when I also tried "don't authorize andactivate" which was: Error communicating with AdobeID server. Try again later. E_AUTH_BAD_DEVICE_KEY"
I'm getting VERY frustrated with this new LION OS on this mac. I can't use OVERDRIVE media-it won't work, I can't use ADOBE, it won't work. I'm about to take it back to where I bo't couple days ago and go back to iPhone which overdrive ALWAYS works and forget all else!
If ANYONE knows ANY solution, since it seems one can never talk to a LIVE person at ADOBE to get help, I'd sure appreicate it.

The way that it is supposed to go, is that when you Launch ADE for the first time, there is a system dialog that supposed to come up and ask you for your login password, so that ADE can get access to the keychain to add the "Digital Editions" password entry.
If you cancel out of that dialog, or don't enter in the password, then you will get the "E_AUTH_BAD_DEVICE_KEY" error.
Make sure that when you launch ADE that this dialog doesn't come up behind ADE (minimize ADE).

Error message on iweb, no communication with server

I have three websites on my iweb and hosted by Go Daddy. The main site will not download, error message no communication with server yet other two work fine. I have been to Apple Genius and talked to Go Daddy three times and all is supposedly in order but still will not work. I am able to download on Cyberduck
but using Iweb would be so much simpler. How can it work on two websites and not the third? Help!

If the main site, with the URL - http://www.domain-name.com - is not downloading in the browser, it will be because the external index.html file is not present in the root folder on the server.
The other sites will work because they have the folder-name in the URL ...
http://www.domain.com/Folder-Name/
... where Folder-Name is the name of the site in iWeb.
Its just a question of republishing the main site if you are using the iWeb FTP and use the settings shown on this page....
http://www.iwebformusicians.com/iWeb/Publish-Website.html
If you can use an FTP application, publish the site to a local folder and upload the external index.html file only, to the root folder on the server.

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
Is this an Apple problem or with my server Netfirms???

Yeah no sorry not the answer. I have my own online hosting unlimited space and bandwidth.
It seems to be linked to teh podcast image. It's very strange...

There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.

I've had several users complain of receiving this message after they have filled out and submitted a form.
There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.
However the data is being saved in forms central. I can't duplicate the issue on my end but it seem to be happing frequently with other users.

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Error Communicating with DCR Server

Hello,
While trying to edit device credentials, I got this error from DCR:
Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
But when I checked the DCRServer process status from Process Status Report and the Process List, it's Running normally.
What could be the problem? The CiscoWorks server runs 3.0.1 (December 2007 Update). Attached are pdshow command output, dcr and DCRServer logs

Hi Joel,
I have the same problem with LMS 3.1,
Products Installed
Re: Error Communicating with DCR Server
Name
Version
License Status
Size
CiscoWorks Common Services
3.2.0
Licensed
Not applicable
Campus Manager
5.1.4
Evaluation
100
CiscoView
6.1.8
Licensed
Not applicable
CiscoWorks Assistant
1.1.0
Licensed
Not applicable
Device Fault Manager
3.1.3
Evaluation
100
Internetwork Performance Monitor
4.1.0
Evaluation
100
Integration Utility
1.8.0
Licensed
Not applicable
LMS Portal
1.1.0
Licensed
Not applicable
Resource Manager Essentials
4.2.0
Evaluation
100
Health and Utilization Monitor
1.1.0
Evaluation
100
When I try to edit Device Credential, this error appears.
Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
DCRServer is stopped and started but the problem still appears.
Thanks.

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Error communicating with AdobeID server - DAY 3

So, I'm trying to activate the Digital Editions of Adobe on my MacBook, but I keep getting this darned message:Error communicating with AdobeID server. Please try again later.
What in the world is happening? I've been trying to get this to work for nearly 3 days. My classes will begin soon, and I'm REQUIRED to have this Adobe Digital Editions in order to download my books. WTH?! Can someone please help me get around this problem please?
Thank,
Monique

I'm getting the same problem. I'm in the UK
My error message is: E_AUTH_DATABASE_CONSISTENCY http://adeactivate.adobe.com/adept/SignInDirect AdobeID
(I have removed my ID)

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

"Error communicating with AdobeID server"

Every time I try to authorize my ADE, I keep getting this error message:
"Error communicating with AdobeID server. Please try again later.
E_ADEPT_IO AddSignInDirect Error%20#2032"
I've tried to authorize it more times than I can count over the past few weeks - anyone know what I can do to fix it?
It used to work just fine, but then I started getting error messages on any books I tried to download and nothing I did would fix it, so I tried uninstalling then reinstalling and it won't let me authorize it now (I tried authorizing with a different ID too, to see if that was the problem but it wouldn't work).

Hi,
As per the error message that you are getting E_AUTH_BAD_DEVICE_KEYplease follow the steps as given below.
1) Open Adobe Digital Editions.
2) Press Ctrl+Shift+D key of your Keyboard and deauthorize Digital Editions
3) Move your e-books to some different Location.
4) uninstall Adobe Digital Editions from your computer.
     Click start>>Control Panel>>Add or remove Program
     Select Adobe Digital Editions from the list and Delete.
5) Also delete following files.
    Click Start>>Run
    Type "regedit" without quotes in the box and hit enter.
    Locate the following key "HKEY_CURRENT_USER>Software>Adobe>Digital Editions"
    delete the full folder (Right click on it and click delete).
     Also locate HKEY_CURRENT_USER>Software>Adobe>Adept
     Delete the full folder.
6) Now download and install Adobe Digital Editions from the link given below.
     http://www.adobe.com/products/digitaleditions/
7) When asked to authorize computer then please enter same Adobe ID and password and authorize the same.
I hope this will help you!!!
Regards
Rizwan

Error Communicating with server

Similar Messages

Maybe you are looking for