Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

Hi,
I have an IBM director 6.3.2 on a Windows Server 2008R2
I try to install the MIB for manage Cisco UCS C-460 server.
I downloaded the mib on the cisco ftp.
the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
Ho can I fix this issue...

Similar Messages

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

Need SNMP MIB files For Cisco SF 300-48 48-Port 10/100 Managed Switch

Hi All,
I need SNMP MIB files for Cisco SF 300-48 48-Port 10/100 Managed Switch.
I have gone through cisco site but not able to get it.
Can anyone please provide me.I have stuck with this.
Thanks
Ram

Hi Ram, yes the MIB can be used. The switches are essentially the same in many regards (especially on a software level).
I do not know the OID for bandwidth. If you're looking for a particular OID may be this tool helps you
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=dot1dTpPortTable&translate=Translate&submitValue=SUBMIT&submitClicked=true
-Tom
Please mark answered for helpful posts

Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ?

Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
Windows :- 2k8 R2

Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
Windows :- 2k8 R2

UsNIC support for UCSM managed C-series server

According to
http://www.cisco.com/en/US/docs/unified_computing/ucs/usnic/c/deployment/1_5_2/b_Cisco_usNIC_Deployment_Guide_For_Standalone_C-SeriesServers.html
usNIC is only supported for standalone c-series server, with VIC-1225 and RHEL
Any plans to support this for UCSM managed c-series (connected with FEX to FI), and additional OS, e.g. W2012 R2 ?

Hello Walter,
usNIC dev team actively write blogs under HPC and you might get better response for your questions / comments to those posts :-)
http://blogs.cisco.com/performance/ultra-low-latency-ethernet-questions-and-answers/
http://blogs.cisco.com/performance/
HTH
Padma

Lync 2013 Standard Edition on Cisco UCS E-Series

Hello,
We have a working Lync 2013 deployment:
- Front-End Enterprise Pool consisting of 3 FE servers
- one Edge Server
- one Back-End server
- one Mediation Server
- one IP PBX gateway, where ITSP's SIP trunks end.
Because we have geographically distributed offices, we are considering deploying of branch offices deployments.
Technet recommends to use SBA for branch offices where there are less than 1000 users. But in case of WAN outage, no conferencing will be available for branch users.
Lync 2013 Standard edition branch deployment would offer all Lync features in case of WAN outage.
In every branch, we consider deploying a Cisco ISR G2 router for terminating branch SIP trunks. This equipment have option to add Cisco UCS E-Series blade that supports CPU with hardware virtualization and supports decent amount of RAM (up to 16GB and up
to 48GB).
Have anyone experience with deploying Lync Standard Edition on this equipment - Cisco UCS E-Series blades? In every branch office there are up to 50 - 500 users that will use Lync.
Thanks,
Andrei Moraru Endava

Hi,
I don’t think you can deploy Lync server 2013 on Cisco UCS E-Series blades.
Here is a link below of “System Requirements for Servers Running Lync Server 2013” may help you:
http://technet.microsoft.com/en-us/library/gg398588.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

IPv6 en de Cisco UCS B - Series

Los Cisco UCS B - Series soporta ipv6?

Hello Mario,
If your question is towards UCS management interfaces (FI and VIP interfaces) supporting IPv6 addresses - the answer is NO, UCS currently does not supports IPv6.
This is on the roadmap but nothing commited as of now.
./Abhinav

Certification of Cisco UCS B-Series blades

Are there any plans for certification of the Cisco UCS B-series blades?
As far as i can find on the novell website they are already certified for SLES11 from Novell.
Greetings, Stefan Dietz

Hi Stefan,
yes, we will certify CISCO hardware. Hopefully this will happen during the next 6 months. I cannot give more specific information at the moment. The SLES11 certification from SAP will also be available soon (see SLES11 thread in this forum as well).
Thanks,
Hannes

Trying to open Aperture, but I get the message, "There was an error opening the database for the library "/Users/davewasson/Pictures/Aperture Library.aplibrary". - and it forces me to quit. What do I do?

Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?

Dave-
You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries.

How we archieve configuration for Cisco ASA 5500 series appliances

Hi,
We need to archieve configuration for Cisco ASA 5500 series appliances.
We have Cisco works LMS 3.0.1.
Device package installed is 4.2
Any help would be appricated.
Thanks in advance.
Samir

Hi ,
Thanks for your answer.
Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
Cisoworks. Am I correct ?
Waiting for your reply.
thanks,
Samir

FCoE options for Cisco UCS and Compellent SAN

Hi,
We have a Dell Compellent SAN storage with iSCSI and FCoE module in pre-production environment.
It is connected to new Cisco UCS infrastructure (5108 Chassis with 2208IOM + B200 M2 Blades + 6248 Fabric Interconnect) via 10G iSCSI module (FCoE module isn't being used at th is moment).
I reviewed compatibility matrix on interconnect but Compellent (Dell) SAN is only supported on FI NXOS 1.3(1), 1.4(1) without using 6248 and 2208 IOM which is what we have. I'm sure some of you have similar hardware configuration as ours and I'd like to see if there's any supportive Cisco FC/FCoE deployment option for the Compellent. We're pretty tight on budget at this moment so purchasing couple of Nexus 5K switches or something equipvalent for such a small number of chassis (only only have one) is not a preferred option. If additional hardware acquisition is inevitable, what would be the most cost effective solution to be able to support FCoE implementation?
Thank you in advance for your help on this.

Unfortunatly there isn't really one - with direct attach storage there is still the requirement that an upstream MDS/N5k pushes the zoning to it. Without a MDS to push the zoning the system it's recommended for production.
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_05717B723C2746E1A9F6AB3A3FFA2C72
Even if you had a MDS/N5K the 6248/2208's wouldn't support the Compellent SAN - see note 9.
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix8.pdf
That's not to say that it won't work, it's just that we haven't tested it and don't know what it will do and thus TAC cannot troubleshoot SAN errors on the UCS.
On the plus side iSCSI if setup correctly can be very solid and can give you a great amount of throughput - just make sure to configure the QoS correctly and if you need more throughput then just add some additional links

C3560G - SNMP MIB Support for QOS Port Trust

I've been digging through Cisco's SNMP Object Navigator without any luck, so I'm turning to the masses to see if someone has an answer.
I'd like to know if there is a supported MIB on the C3560G platform (for any IOS version) that will report the QOS port trust state on a given switchport. Although not necessary for my current needs, it would be nice if there was a way to report the other fields produced by the "show mls qos interface" IOS command.
Thanks!
-- John

Vinod,
Thank you for your response. I was already aware of the CISCO-PORT-QOS-MIB (supported by the 3560G) and CISCO-SWITCH-QOS-MIB (not supported by the 3560G) MIBs. After reviewing the CISCO-CLASS-BASED-QOS-MIB (supported by the 3560G), I see no specific OID that would retrieve the information I require as it mainly pertains to the MQC.
I found two OIDs that appear to represent the data I'm trying to collect. The first one is csqIfTrustState from the CISCO-SWITCH-QOS-MIB. Unfortunately this appears to be supported only on the 6500/7600 devices. The second one is caqIfOperTrustState from the CISCO-CATOS-ACL-QOS-MIB, which is a legacy MIB for the old CATOS software.
Please let me know if I overlooked a specific OID from the MIBs you pointed out or if there are any alternatives you can think of. Thanks!
-- John

Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches

Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S     .1.3.6.1.4.1.9.1.1466
C3560CG8PC         .1.3.6.1.4.1.9.1.1317
C3560CCG8TC     .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS     .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback Erich

Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian.

Error: Failed to parse path in URl (Cisco UCS 6100 Series Fabric Interconnect)

I have to shut down parts of my network due to an electrical outage this weekend. I have a Cisco UCS 6100 Server Fabric Interconnect. I am trying to backup the configuration. This is the command I am using create backup tftp://*.24.1.88 full-state enabled. The error I receive is Error: failed to parse URI. Which I believe URI means URL.

Hi Parakiteiz,
Looks like the format is incorrect and you have an extra 't' on the tftp command you provided. Please take a look at the link below for configuration assistance.
Creating backup operaiton.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-1-1/b_CLI_Config_Guide_1_1_1/CLI_Config_Guide_1_1_1_chapter38.html#task_4704260519853629974
Please let me know if this help

Android tablets supported for Cisco Jabber for Android 10.5 ?

Exist a list with tablets support for this realease ?
In release notes only include smartphones.
Anoher question, is about version android client, in google play exits a old version, but not 10.5, any reason for this ?
Thanks in advance.

The tab listed for support is " Google Nexus 10 (Android OS 4.4.x) ". Please refer to the following link for more information;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_011.html#CJAB_RF_D3CF90B1_00
Quoting the following link; https://play.google.com/store/apps/details?id=com.cisco.im&hl=en ;we have got the J4A 10.5 listed on the playstore.
- please rate if this helps.

Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

Similar Messages

Maybe you are looking for