Error compiling FPGA VI: ERROR:Xflow - Program xst returned error code 6.

When I use the Linear Interpolation function in my FPGA VI i get the compilation error:
ERROR:Xflow - Program xst returned error code 6. Aborting flow execution...
the Compile Server also gives the more detailed information:
ERROR:Xst:1749 - "C:/NIFPGA85/srvrTmp/LOCALH~1/TRAPCO~2/NiLvFxpFloor.vhd" line 68: error: The output for the floor function should not have any fractional bits.
I'll be happy for any suggestions how to solve this.

Hello!
Could you compile a program with only the Linear Interpolation.vi and only some constants and indicator as input and output?
I tried on my PC and compile a simple VI containing only the Linear Interpolation.vi
Which Version of NI-RIO do you use?
Do you also placed the FPGA VI in library? If yes put out all FPGA VIs from the library and check that they aren't reentrant.
This could cause problems to the compiling of FPGA VI.
Try to create a new project with only a VI with the linear interpolation and check if it is compiled.
Best regards
Ken

Similar Messages

Fpga -Re:ERROR MESSAGE INDICATIN X-FLOW PROGRAM MAP RETURNED ERROR CODE

sir,
I am working on a project using ni rio-7831R uaing labview fpga1.1, on compiling on to the device i am encountering a error giving follow message:
Problem encountered during the packing phase.
ERROR:Xflow - Program map returned error code 2. Aborting flow execution...
so please, recommend me the action so that i could compile my project without error.
vamsi

Hi Vamsi,
The information you are looking for is in this KB: Why Does My FPGA Compile Give An OVERMAPPED Error When Compiling? < http://digital.ni.com/public.nsf/websearch/060BA89FE3A0119E48256E850048FFFE?OpenDocument >
I think you are running out of space on your FPGA. You can either purchase a 3 million gate fpga(7833R) or Optimize your code to use less space. Have a great day!
Regards,
Prashanth

Error in getValue: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getComplexValue]" nsresult: "0x8000ffff (NS_

This error keeps popping up every couple of minutes.
Error in getValue: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getComplexValue]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: chrome://socialfixer/content/prefman.js :: <TOP_LEVEL> :: line 18" data: no]

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Error in Receiving Transaction Processor concurrent program

Hi all,i am trying to insert data into rcv_headers_interface and rcv_transactions_interface.So,for this data to get populated in rcv_shipment_headers and rcv_shipment_lines i am running Receiving Transaction Processor concurrent program in purchasing super user.But,this concurrent program gives below error
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:05
+---------------------------------------------------------------------------+
Concurrent program RVCTP returned error
Cause:        RVCTP encountered an internal error. Parameters: RVCTP,BATCH,,81,
Action:        Note both this error number and the actions you are trying to perform. Contact your system administr
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause:        Subroutine rvtbm_batch_mngr() returned an internal error.
Action:        Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause:        A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action:        Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:10
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
{code}
Can someone kindly explain me what's really going why coz i am new to this Applications.
Thanks in advance!!

There are several notes on metalink for "RVTBM-007: Subroutine rvtbm_batch_mngr() returned error".
Take a look at those.
Also if you are using dual uoms, make sure that setup and conversion is setup correctly.
Hope this helps,
Sandeep Gandhi

RVTBM-120: Subroutine rvtptcontrol() returned error

Getting this Error : RVTBM-120: Subroutine rvtptcontrol() returned error
Please find the log file:
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 01-NOV-2010 17:20:04
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,203844,
Action: Note both this error number and the actions you are trying to perform. Contact your system ad
RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error
Cause: Subroutine rvtbm_immediate_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your syste
RVTBM-120: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 01-NOV-2010 17:20:06
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Please Suggest...

Getting this Error : RVTBM-120: Subroutine rvtptcontrol() returned error
Please find the log file:
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 01-NOV-2010 17:20:04
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,203844,
Action: Note both this error number and the actions you are trying to perform. Contact your system ad
RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error
Cause: Subroutine rvtbm_immediate_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your syste
RVTBM-120: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 01-NOV-2010 17:20:06
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Please Suggest...

Can't find (and possibly don't have) the -lglut -lGLU -lGL libraries... or at least when I try to compile a program, it returns with that error. Any ideas (I really need to get this popgen program running on Lion)? Thx!

Hi all,
I'm trying to compile a population genetic software program onto my Mac Lion. It was originally compiled to Tiger and worked beautifully. But now I'm getting an error 'library not found for -lglut', and now I'm trying to figure out how to download the library. I've installed the command line code for Xcode, and am thinking I possibly missed installing the libraries. I could be very wrong here... all I know is that I'm no longer near the people I would ask to help me with this so I'm asking you! Thanks in advance for any help! I guess my questions are: 1) where can I download the glut (potentially OpenGL) libraries (if I don't have them already)? And 2) once downloaded, how do I install it so the makefile will compile my program (in terminal, not Xcode)? Cheers,
C

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

"Error Compiling Movie: Unknown Error" or program crash when rendering

I just built a new PC because my Macbook Pro couldn't render fast enough. Now that I have built this brand new computer, I can't render at all! I render once and get the "Error Compiling Movie: Unknown Error" and if I try to render again, the program crashes.
My files are not corrupt as I can render them without problems on my laptop (just slowly) and on a friend's PC. I can export fine but the project I am working in is currently very small. I have 450gb of space and when using After Effects, rendering is a breeze. I have restarted, uninstalled and reinstalled and nothing seems to be doing the trick.
I feel like this must be a bug in Premiere Pro CC. Has anyone had this problem and/or come up with any solutions?

You may have more luck getting help with this kind of problem on the AME forum. Or at least have a look at this page from the AME forum prompting you for the information that can help in isolating the cause of this problem: http://forums.adobe.com/thread/1011883.

NI-Farm internal error - unable to compile FPGA VI

Hello!
When I try to compile any FPGA VI with LabVIEW2013 or 2012 SP1, I receive the following error:
"An error occurred attempting to connect to this compile server.
Details:
NI-Farm Internal Error: Client received unexpected or bad data from the server."
The intermediate files are not generated, the error appears immediately after I select build from build specification, or after I click the run arrow.
I'm using local compile server.
The hardware I use: CompactRIO Evaluation Board - SbRIO9636, Laptop DELL, Intel core2 Duo, T5800, 2GHz, 3GB RAM, Windows 7 Ultimate 64bit, SP1.
Intermediate files CAN be generated w/o any issues, if I select from the menu. If I launch FPGA Compile Worker, a balloon message appears specifying that "FPGA compile worker is running" but after a few seconds, another message pops up: Multiple log on attempts have been unsuccessful - please see attached images.
At first I thought that my firewall(Comodo 6.3) is the reason for this, so I disabled it but nothing changed. Then I tried to repair LabVIEW FPGA, and XILINX tools with the firewall disabled but din not resolve the problem. I tried with both LabVIEW 2012 SP1 and 2013.
If you have any suggestions, please let me know! Thank you!
Certified LabVIEW Developer
Solved!
Go to Solution.

Compile worker is set to local compile server. I could not start MAX 5.4 because of an Cmx exception, and after I upgraded MAX to 5.5, a missing dll error occurred. So long story short, I installed LabVIEW2013. Now MAX is working and I could generate a technical report. Only NI-RIO Server and NI License Server services were set on manual (or stopped?). I started both of them but still cannot compile FPGA vi.
Certified LabVIEW Developer
Attachments:
ni_support.zip ‏1439 KB

Errors compiling program - passing array to method

My program has several errors when compiling and I don't know what I am missing? I would appreciate any tips about where to look if it's syntax, missing curly braces, anything. I am doing this as a practice for my midterm tonight and we can use our notes but they won't help me much if I have them wrong.. Thanks in advance for any help. I will list the errors then a copy of what Ive written.
'.class' expected
int[]date = int new[3];
illegal start of expression
public static int verifyDate(int [] d)
';' expected
unexpected type
required: value
found : class
int[]date = int new[3];
cannot resolve symbol
symbol: method verifyDate (int[])
location: class MidTermPractice.MidTerm
int check = verifyDate(date);
imcompatible types
found : int
required: boolean
if (check = 0)
/* Rhonda Roberson
* MidTerm.java
* Practice Midterm
* Created on November 17, 2004, 4:08 PM
package MidTernPractice;
import javax.swing.JOptionPane;
public class MidTerm
//Main method
public static void main(String[]args)
int[]date = int new[3];
String monthAsString = JOptionPane.showInputDialog(null,
"Enter Month", "Enter Month as a number", JOptionPane.PLAIN_MESSAGE);
date[0] = Integer.parseInt(monthAsString);
String dayAsString = JOptionPane.showInputDialog(null,
"Enter Day", "Enter Day as a number", JOptionPane.PLAIN_MESSAGE);
date[1] = Integer.parseInt(dayAsString);
String yearAsString = JOptionPane.showInputDialog(null,
"Enter Year", "Enter 4 digit Year", JOptionPane.PLAIN_MESSAGE);
date[2] = Integer.parseInt(yearAsString);
//Call VerifyDate() Method
int check = verifyDate(date);
//Print Message if date is valid
if (check = 0)
JOptionPane.showMessageDialog(null, "Date is Valid");
else
JOptionPane.showMessageDialog(null, "Date is NOT VALID");
//************Method to verify date
public static int verifyDate(int [] d)
int check = 0;
if (d[0] < 1 || d[0] > 12)
check = 1;
if(d[1] < 1 || d[1] > 31)
check - 1;
if(d[2] < 1900 || d[2] >2100)
check = 1;
return check;

'.class' expected
int[]date = int new[3];
You need a space between int[] and date and it should be "= new int[3];"
unexpected type
required: value
found : class
int[]date = int new[3];
Same as above
imcompatible types
found : int
required: boolean
if (check = 0)
The Java operator to compare two values is == not =

Error -63043: FPGA disconnects after running for a few seconds

Hello,
I face the following problem whenever I try to run a FPGA VI directly from my host PC onto my PXI 7831R through the ethernet.
Initially, MAX shows my remote PXI system as 'Connected', and the FPGA VI compiles fine.
But when I hit the 'Run' button, the VI seems to run fine for 3-4 seconds, after which it hangs (screenshot attached). A couple of seconds later, it returns the following message :-
" LabVIEW FPGA called another software component and that component returned the following error
Error code: -63043
NI-RIO FPGA Communications framework: The session is invalid. The target may have reset or been rebooted. Check the network connection and retry the operation. "
The VI continues to run on the FPGA, but I can't control it anymore from my host-PC. Even MAX shows the remote system as disconnected, after this error occurs. All I am left to do is to reboot my host-PC as well as the remote PXI target; to reach the beginning of this problem.
I have checked the NI-RIO settings. Both my host-PC as well as remote PXI system have the same NI-RIO 3.0.0 version installed. I am running LabVIEW 8.6 .
Can anyone help ?
Attachments:
Error Screenshot.JPG ‏89 KB

Hi everyone, I have the same problem regarding the 63043 error code
I´ve simplified my FPGA vi up to a simple write and read program of a port, as shown in the attachment, but I still have the same error.
It´s interesting that the program runs, note in the jpg file that the while loop counter suddenly stops at Numeric=10, it means the program ran 10 iterations. Also the input port succesffully read the pin value, this meas that the program ran properly, but the SBRIO rebooted when Numeric was 10 and the target device disconnected from the project, i wonder why?
The target device is an sbRIO-9632 , serial number 01452AC3 with the following software installed:
NI-RIO 3.4.0 - January 2010
DataSocket for LabVIEW Real-Time 4.7.0
EPICS Server I/O Server 1.6.1
LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
LabVIEW Real-Time 9.0.1
Language Support for Japanese 9.0.1
Language Support for LabVIEW RT 1.0.0.3
Modbus I/O Server 1.6.1
NI-RIO 3.4.0
NI-Serial RT 3.3.4
NI-VISA 4.6
NI-VISA Server 4.6
NI-Watchdog 4.0.1
Network Variable Engine 1.6.1
Run-Time Engine for Web Services 2.0.1
SSL Support for LabVIEW RT 2.0.1
System State Publisher 1.1.0
Variable Client Support for LabVIEW RT 1.6.1
Web Server for LabVIEW RT 2.0.0
Available add-ons:
LabVIEW Control Design and Simulation 9.0.1
However, if I run a program in the RT processor without referencing any vi on the FPGA it runs without problems, it´s only when a file is loaded into the FPGA that the system reboots and the error message appears.
Please help me
leito
Attachments:
error-63043.jpg ‏264 KB

Error compiling movie. I/O Error.

Hello.
Im not sure if i should have posted in the hardware section.
I have done some reaserch on this problem but haven't really got the solution.
It doesnt matter what format i export it always gives me this error. With h264 and some else, its a bit different too.
- Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_1.prproj
- Output File: C:\Users\Kristjan\Desktop\Sequence 01.mp4
- Preset Used: YouTube KW
- Video: NTSC, 480x360, 30 [fps], Progressive
- Audio: AAC, 64 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 1,55, Max 2,29 [Mbps]
- Encoding Time: 00:00:00
3.12.2009 0:53:45 : Encoding Failed
Cannot open "C:\Users\Kristjan\Desktop\Sequence 01.mp4" file for writing. Please check the output filename and file permissions (if it already exists) and then try again.
- Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_2.prproj
- Output File: C:\Users\Kristjan\Desktop\Sequence 01.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:00
3.12.2009 0:54:47 : Encoding Failed
Error compiling movie.
I/O Error.
- Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_3.prproj
- Output File: C:\Users\Kristjan\Desktop\Sequence 01.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:00
3.12.2009 0:58:04 : Encoding Failed
Error compiling movie.
I/O Error.
- Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_4.prproj
- Output File: C:\Users\Kristjan\Desktop\Sequence 01.avi
- Preset Used: Custom
- Video: 720x480, 25 [fps], Progressive, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:00
3.12.2009 1:08:37 : Encoding Failed
Error compiling movie.
I/O Error.
- Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Chemistry, Copper_6.prproj
- Output File: C:\Users\Kristjan\Desktop\Youtube.avi
- Preset Used: Custom
- Video: 720x480, 25 [fps], Progressive, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:01
3.12.2009 1:28:42 : Encoding Failed
Error compiling movie.
There are alot of errors about my hard drive in the event viewer aswell. I have 2 hard drives.
The device, \Device\Harddisk1\DR1, has a bad block.
The driver detected a controller error on \Device\Harddisk2\DR2.
even my cd rom has a bad block, The device, \Device\CdRom0, has a bad block.
I defrag my drives regulary.
My PC ,I use the "system information" option that win 7 has :
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SEMPERFI-PC
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2997 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0503, 14.07.2009
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale Eesti
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name SemperFi-PC\Semper Fi
Time Zone FLE Standard Time
Installed Physical Memory (RAM) 4,00 GB
Total Physical Memory 4,00 GB
Available Physical Memory 2,10 GB
Total Virtual Memory 8,00 GB
Available Virtual Memory 5,47 GB
Page File Space 4,00 GB
Page File C:\pagefile.sys
I/O:
0x00000000-0x0000000F Direct memory access controller OK
0x00000000-0x0000000F PCI bus OK
0x00000010-0x0000001F Motherboard resources OK
0x00000020-0x00000021 Programmable interrupt controller OK
0x00000022-0x0000003F Motherboard resources OK
0x00000040-0x00000043 System timer OK
0x00000044-0x0000004D Motherboard resources OK
0x00000050-0x0000005F Motherboard resources OK
0x00000061-0x00000061 System speaker OK
0x00000062-0x00000063 Motherboard resources OK
0x00000065-0x0000006F Motherboard resources OK
0x00000070-0x00000071 System CMOS/real time clock OK
0x00000072-0x0000007F Motherboard resources OK
0x00000080-0x00000080 Motherboard resources OK
0x00000081-0x00000083 Direct memory access controller OK
0x00000084-0x00000086 Motherboard resources OK
0x00000087-0x00000087 Direct memory access controller OK
0x00000088-0x00000088 Motherboard resources OK
0x00000089-0x0000008B Direct memory access controller OK
0x0000008C-0x0000008E Motherboard resources OK
0x0000008F-0x0000008F Direct memory access controller OK
0x00000090-0x0000009F Motherboard resources OK
0x000000A0-0x000000A1 Programmable interrupt controller OK
0x000000A2-0x000000BF Motherboard resources OK
0x000000C0-0x000000DF Direct memory access controller OK
0x000000E0-0x000000EF Motherboard resources OK
0x000000F0-0x000000FF Numeric data processor OK
0x00000290-0x00000297 Motherboard resources OK
0x000003B0-0x000003BB Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1 OK
0x000003B0-0x000003BB ATI Radeon HD 3850 OK
0x000003C0-0x000003DF Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1 OK
0x000003C0-0x000003DF ATI Radeon HD 3850 OK
0x000003F8-0x000003FF Communications Port (COM1) OK
0x00000400-0x0000041F Intel(R) ICH9 Family SMBus Controller - 2930 OK
0x00000480-0x000004BF Motherboard resources OK
0x000004D0-0x000004D1 Motherboard resources OK
0x00000800-0x0000087F Motherboard resources OK
0x00000D00-0x0000FFFF PCI bus OK
0x00009400-0x0000940F Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
0x00009480-0x0000948F Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
0x00009800-0x00009803 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
0x00009880-0x00009887 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
0x00009C00-0x00009C03 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
0x0000A000-0x0000A007 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
0x0000A400-0x0000A40F Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
0x0000A480-0x0000A48F Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
0x0000A800-0x0000A803 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
0x0000A880-0x0000A887 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
0x0000AC00-0x0000AC03 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
0x0000B000-0x0000B007 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
0x0000B080-0x0000B09F Intel(R) ICH9 Family USB Universal Host Controller - 2934 OK
0x0000B400-0x0000B41F Intel(R) ICH9 Family USB Universal Host Controller - 2935 OK
0x0000B480-0x0000B49F Intel(R) ICH9 Family USB Universal Host Controller - 2936 OK
0x0000B800-0x0000B81F Intel(R) ICH9 Family USB Universal Host Controller - 2937 OK
0x0000B880-0x0000B89F Intel(R) ICH9 Family USB Universal Host Controller - 2938 OK
0x0000BC00-0x0000BC1F Intel(R) ICH9 Family USB Universal Host Controller - 2939 OK
0x0000C000-0x0000CFFF Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1 OK
0x0000C000-0x0000CFFF ATI Radeon HD 3850 OK
0x0000D000-0x0000DFFF Intel(R) ICH9 Family PCI Express Root Port 6 - 294A OK
0x0000D800-0x0000D8FF Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller OK
0x0000E000-0x0000EFFF Intel(R) ICH9 Family PCI Express Root Port 5 - 2948 OK
0x0000E400-0x0000E40F Standard Dual Channel PCI IDE Controller OK
0x0000E480-0x0000E483 Standard Dual Channel PCI IDE Controller OK
0x0000E800-0x0000E807 Standard Dual Channel PCI IDE Controller OK
0x0000E880-0x0000E883 Standard Dual Channel PCI IDE Controller OK
0x0000EC00-0x0000EC07 Standard Dual Channel PCI IDE Controller OK
0x0000FFE0-0x0000FFEF AS0MMTY9 IDE Controller OK
Drives:
Drive C:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 149,05 GB (160 040 443 904 bytes)
Free Space 57,80 GB (62 065 405 952 bytes)
Volume Name
Volume Serial Number 44C64C64
Drive D:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 149,05 GB (160 038 907 904 bytes)
Free Space 53,30 GB (57 233 891 328 bytes)
Volume Name Windows
Volume Serial Number 728D93DE
Drive E:
Description CD-ROM Disc
Drive G:
Description CD-ROM Disc
Disks:
Description Disk drive
Manufacturer (Standard disk drives)
Model SAMSUNG HD160JJ ATA Device
Bytes/Sector 512
Media Loaded Yes
Media Type Fixed hard disk
Partitions 1
SCSI Bus 1
SCSI Logical Unit 0
SCSI Port 5
SCSI Target ID 0
Sectors/Track 63
Size 149,05 GB (160 039 272 960 bytes)
Total Cylinders 19 457
Total Sectors 312 576 705
Total Tracks 4 961 535
Tracks/Cylinder 255
Partition Disk #1, Partition #0
Partition Size 149,05 GB (160 040 448 000 bytes)
Partition Starting Offset 32 256 bytes
Description Disk drive
Manufacturer (Standard disk drives)
Model WDC WD1600BB-00GUC0 ATA Device
Bytes/Sector 512
Media Loaded Yes
Media Type Fixed hard disk
Partitions 1
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target ID 0
Sectors/Track 63
Size 149,05 GB (160 039 272 960 bytes)
Total Cylinders 19 457
Total Sectors 312 576 705
Total Tracks 4 961 535
Tracks/Cylinder 255
Partition Disk #0, Partition #0
Partition Size 149,05 GB (160 038 912 000 bytes)
Partition Starting Offset 1 048 576 bytes
Multimedia shows me these codecs:
video:
c:\windows\system32\iyuv_32.dll Microsoft Corporation OK C:\Windows\system32\IYUV_32.DLL 6.1.7600.16385 52,50 KB (53 760 bytes) 14.07.2009 3:06
c:\windows\system32\msrle32.dll Microsoft Corporation OK C:\Windows\system32\MSRLE32.DLL 6.1.7600.16385 15,50 KB (15 872 bytes) 14.07.2009 3:18
c:\windows\system32\msvidc32.dll Microsoft Corporation OK C:\Windows\system32\MSVIDC32.DLL 6.1.7600.16385 37,50 KB (38 400 bytes) 14.07.2009 3:18
c:\windows\system32\msyuv.dll Microsoft Corporation OK C:\Windows\system32\MSYUV.DLL 6.1.7600.16385 24,00 KB (24 576 bytes) 14.07.2009 3:06
c:\windows\system32\tsbyuv.dll Microsoft Corporation OK C:\Windows\system32\TSBYUV.DLL 6.1.7600.16385 14,00 KB (14 336 bytes) 14.07.2009 3:06
c:\windows\system32\xfcode~1.dll Not Available Xfire video codec [XFR1] OK C:\Windows\system32\XFCODEC64.DLL 1.0.0.40405 26,89 KB (27 536 bytes) 30.11.2009 21:33
audio:
c:\windows\system32\imaadp32.acm Microsoft Corporation OK C:\Windows\system32\IMAADP32.ACM 6.1.7600.16385 21,50 KB (22 016 bytes) 14.07.2009 3:18
c:\windows\system32\l3codeca.acm Fraunhofer Institut Integrierte Schaltungen IIS Fraunhofer IIS MPEG Layer-3 Codec OK C:\Windows\system32\L3CODECA.ACM 1.9.0.401 79,50 KB (81 408 bytes) 14.07.2009 3:22
c:\windows\system32\msadp32.acm Microsoft Corporation OK C:\Windows\system32\MSADP32.ACM 6.1.7600.16385 23,50 KB (24 064 bytes) 14.07.2009 3:18
c:\windows\system32\msg711.acm Microsoft Corporation OK C:\Windows\system32\MSG711.ACM 6.1.7600.16385 14,50 KB (14 848 bytes) 14.07.2009 3:18
c:\windows\system32\msgsm32.acm Microsoft Corporation OK C:\Windows\system32\MSGSM32.ACM 6.1.7600.16385 28,50 KB (29 184 bytes) 14.07.2009 3:18
I downloaded and installed the Win7 codecs by Shark. Because...there are any other codecs available for win 7 ?
Tell me if need any more info..which u probably do.
If there are any better forums for this kind of problem then please tell me.
I hope we can fix this prooblem.
I think i haven't said my motherboard. Its P5E3 PRO. It has EPU engine and it turns off the hard drive when its idle...Premiere pro and all the sytem files are installed on my C drive which is like the main drive. On D drive i keep my music, downloads and stuff. I think it can turn of both drives then idle, but mostly it turns off D drive, I think. I have a new motherboard and i haven't got the hang of it how it shuts them down.
But i think this really isnt a problem.
Thanks in advance.

Serious hardware problems!
Go for a fresh install of OS & programs, but be prepared to first check your disks with a utility from the drive manufacturer (WD and Samsung). You may need new disks.
Great to include these details, but for readability I suggest you include these as an attachment instead of in the text. It may scare people off reading all that detail.

Error compiling movie 'unknown error' premiere elements 11, tried every troubleshoot, what now?

I'm trying to export a video and I keep on running into this error message, which stops the export process. I've already visited and tried the troubleshooting suggestions on this page and this page, and this page, and none of those suggestions have worked. Here's a list of what failed:
Export in various file formats, every single one failed
I removed each asset individually and tried to export the video after each removal (100+ assets, imagine how long that took) and I got the error after every single time
I removed the front half of the video and tried exporting, still failed.
I removed the back half of the video (because if it failed if I removed the front, the problem asset should be in the back, right? nope.) and tried exporting, it still failed.
I don't have any Auto Color, Auto Contrast, Auto Levels, or Shadow/Highlight on any of my clips, although if I did, I'd try removing them.
All of my video files are the same format, so it's not a mix of formats in my timeline which is causing the problem.
I tried disabling auto-save, but it already tried to auto-save during the first 20 times I've attempted this, so the damage might already be done.
I obviously didn't use any other programs during this process
I moved all my assets to a different location on my harddrive, then reopened the project and refound the assests one by one, each of which had no problem getting into the timeline. I tried rendering after this, and the render bar sailed along until a certain point, where it got stuck indefinitely. I cancelled the render, which froze the program. I had to close it and re-open the project, and re -link every asset again. Once again there were no problems adding the assets. I saved the project before the next render, so I wouldn't have to do this a third time, and it was a good idea I did, because the program froze again during the subsequent render.
My computer didn't go to sleep or hibernate during the first 5-10 times I tried various methods for exporting. It has slept in some of the 10+ times I've tried it since, because I don't have the patience to sit in front of my screen and watch it fail again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again. CAN YOU TELL THAT I'M FRUSTRATED???
The first thing I noticed that was wonky with this project was when I first tried to render my sequence. The render window chugged along just fine until it got to a certain point (can't remember the %), at which point it got stuck indefinitely. I had to cancel the render, and then render other parts of the sequence bit by bit, avoiding what I thought was the problem part. I tried rendering the problem part, and it got stuck again, so I eventually just decided that that clip didn't need to be in this movie, so I deleted it from the timeline. All should be good at this point, my whole timeline is green from being rendered. But, when I tried to export the video, I started down this tourtuous path of failed exports and frustration, and now here I am, posting in the forum, hoping someone can help me out.
The problem asset (if that was the problem in the first place) isn't in the timeline any more, but I'm still having issues exporting the movie. The fact that rendering still gets stuck after re-linking assets, and after getting rid of the first problem asset, makes me think that there is some bigger underlying issue, but I have no idea what that could be. I followed these instructions and re-opened the project, tried to export, and still got that 'Unknown Error'.
Please assist before I put my fist through this company computer.

maxlong99
Thanks for your update. Let us go through it.
You wrote
During one of my isolation tests, I stripped the timeline off all assets except clips from the same footage and I also removed that New Blue effect, and the project exported without issue.
Did you run a control which included "with the New Blue effect" in this isolated test which does not sound like the "Full Project" as suggested in what you wrote next?
You wrote
Could multiple renders and project files be part of the problem? I've created many, many different versions of this project to test and see where the problem is, which in turn means I've created many different render files for each different project. If this could be part of the problem, should I keep the original project and delete all my test projects and associated render files therein?
Each of the projects should have its own name which will be applied to its files. And each project should have rendered files specific to it (for SD project whether video or still clip = DV .avi file; for HD project whether video or still clip = MPEG2.mpg file). Are you naming these different projects with distinctive names?
Have you expanded the Timeline with the -+ slider and closely inspected the track content for
a. leftovers such a very thin vertical black lines scattered about
b. gaps
c. transitions, and especially audio placement
You have probably seen the following, but I will post the link just in case. I suspect you have been there and done that.
http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
Please let us know what the closer inspection of the Timeline content (as mentioned) revealed.
Thanks.
ATR

Changed Video Preview "Error Compiling Movie" "Unknown Error"

Hi All,
I am running
10.8.3 OSX
2x2.8 GHz Quad-Core Intel Xeon
16gb 800 MHz DDR2 FB-DIMM
NVIDIA GeForce 8800 GT 512 MB
AE CS6 11.0.2.11
PP CS6 6.0.2
So I have 2 dynamic link AE comps in my premiere sequence just with some blur transitions & simple animated graphics.
I was having trouble with the blur quality from AE to Premiere so adjusted my Video preview settings from,
Created a new sequence and had these settings, copied and pasted the content from the first comp,
Unrendered my dynamic link blur works (yay) but when I try to preview render my sequence I get the wonderful error "Error compiling movie. Unknown Error"
Any suggestions?
I have tried opening and closing the programs, replacing the dynamic links in the seuquence...
Thanks in advance!

05555...did you get this reconciled??? If so, what did you do....I have encountered the same window myself, today.

Error compiling movie - unknown error - encoding failed

I am running a 2.40 GHz Quad Core with 8GB RAM
I have a deadline on a video project in Premiere Pro CS4 with 4 video timelines and 8 audio timelines with many transitions and key frames with hours on two sequences of work completed and ready to export to an AVI file and burn a DVD. The 30 minute sequence with only 3 timelines converted to AVI file okay. The larger sequence with more timelines, keyframes, etc. will not export through Adobe Media Encoder for a Microsoft AVI file or an Uncompressed AVI file - getting the above error message each time. Getting same errors when exporting a dynamic link to Encore to burn a DVD.
The sequence acted funny when I loaded the fourth video timeline so I deleted it and waiting untill the completion of the sequence to add any of that fourth timeline to that sequence and I did not even try to load the fourth timeline that I wanted to add...
Here are the error messages I am getting:
- Source File: C:\Users\dbonnett\AppData\Local\Temp\Katie Hill Wedding V03_4.prproj
- Output File: C:\Users\dbonnett\Videos\2009-04-11, katie hill wedding\katie hill finished videos\Hill Ceremony Final.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:19:56
6/16/2009 7:29:23 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\dbonnett\AppData\Local\Temp\Katie Hill Wedding V03_5.prproj
- Output File: C:\Users\dbonnett\Videos\2009-04-11, katie hill wedding\katie hill finished videos\Hill Ceremony Final.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:16:23
6/16/2009 8:11:08 PM : Encoding Failed
Error compiling movie.
Unknown error.
I have been going back & forth with Adobe Support with troubleshooting advice. I am running a 2.40 GHz Quad Core, 8GB RAM - had to upgrade to Windows Vista 64-bit for computer to recognize more than 2GB RAM, had to purchase Premiere Production Premium CS4 because Adobe no longer supported Premiere Pro 2.0 & Adobe does not support Windows XP-64 bit (so Windows Vista was pushed down my throat...) I have followed the Adobe instructions to Optimize Windows Vista for Adobe Premiere Pro CS4, I have uninstalled and re-installed the full program more than once. I have defragmented my computer, I have performed the disk cleanup and deleted all temporary files, etc. to make sure my computer is running optimally.
I have read the other Adobe threads that talk about CS3 & earlier similar error messages, but have found nothing with this particular message. I have deleted the fourth timeline off of the video and tried to see if that would make it work, but it did not.
Does ANYBODY have any suggestions on how I can further trouble shoot to get this project out or know of a way that I can export this project to another program to get an AVI file and a DVD burned with custom menus...

I am using a 1TB Hard drive with 300 GB free space. Yes, I always have to delete projects off to make room for new projects. I have 3 750GB hard drives in my computer in addition to the main C drive that I am using. Once a project is completed and a client is satisfied, I move the final AVI file off to one of the auxillary drives and delete the entire project from the C drive. Then I defragment, delete temp files, disk cleanup, you name it to get the drive ready to use for the next project. I have followed the Adobe protocol for all of this as well as my computer vendor. I got rid of 95 GB of temp stuff several days ago with the disk cleanup and another 45 GB after deleting another project off my computer... so looks like I am doing these things..please advise if you know of anything else.
In the meantime, I am going to try to export to the MPEG2 -DVD export to see if this will work. I did get an uncompressed file of 31 GB created which errored out at 24:24 minutes into the project and the AVI will not play so it is worthless so I am going to delete it. I went to the timeline at 24.24 minutes and there is nothing unusual about that portion of the clip. This is the largest and most tedious timelines of the project because it is stacked 3 video timelines high with just a a few pieces of the 4th timeline in the project. 24:24 on the timeline is just another keyframe of moving the keyframes up and down to show which video camera version I want visible in that portion of the video - fading in and out of the project with the key frames...
I will let you know if I can get an MPEG2 file. Will this be a good enough quality to put on a DVD. This is a standard NTSC 4:3 format video...

PE9 Error Compiling Movie. Out of memory.

I don't know what is going on when exporting. I have my export settings set for PC: AVI. It seems to do fine at first, but about 75%, I received an error message stating that the program had an error while compiling the movie because it was out of memory. What could cause a program like Premiere Elements 9 to lose memory? Would programs like web browsers in the background affect it?
Thanks!

Is this a continuation of the same issue you brought up in your thread yesterday, C?
http://forums.adobe.com/message/3818100#3818100
Please don't start a new thread on the same topic until you've exhausted your other conversation. Otherwise, we're just going to rehash the same issues all over again: Disc space, fragmentation, tmp files, etc.
As I said your other thread, those are your most likely causes, and I recommend you continue to look into that issue.

Error compiling FPGA VI: ERROR:Xflow - Program xst returned error code 6.

Similar Messages

Maybe you are looking for