Error Compiling when using RGB Color Corrector and Unsharp Mask

If I apply the RGB Color Corrector and and Unsharp mask to a clip within a sequence and try to render the sequence or a small portion of the work area I get the Error Compiling: Unknown error.
This is occurring within a project I have updated to Premiere CS6 from Premiere CS5.
I have tried creating a new sequence and importing the same clip and other clips. Anytime I try to use both the Unsharp Mask and RGB Color Corrector I am unable to render. I have tried this with Mercury Playback both in hardware and software modes with the same result.
Has anyone else seen something like this?

Okay, glad this occurs for others too and I am not experiencing something isolated. The issue here is this shouldn't be happening at all.
Premiere CS5 has no problem with this.
Yeah if I turn off one effect or the other no problem. Unfortunately it doesn't matter the order I place the effects in I get the same error regardless of which is placed first.
Nesting does work. If I create a sequence, apply one or the other to the clip in the sequence then embed the sequence in another sequence and apply the remaining filter to the sequence containing the clip then I can get my color correction and edge definition. But this is a work around.
There seems to a bug here since there were no issues when using RGB Color Corrector and Unsharp Mask simultaneously applied to one clip in CS5. I doubt there will be a fix for this anytime soon so it looks like I will have to use another method for color correcting or apply RGB color correction to clips already embedded in a sequence as I move forward into solely using CS6.
(How this can become an issue is that after applying effects and color correction to several clips within a sequence I like to render that entire sequence. Then this sequence is ebedded in another main sequence and I can add additional effects and transitions and overlays without killing the live playback speed and only have to render smaller amounts of content from additional tracks. It ends up saving a lot of time after the initial length of rendering.)
Thanks for the suggestions.

Similar Messages

Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip. It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted. PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client. Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone.

Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card. Don't think I have any plugins. I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that. Think I deleted it.
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program. I am using the non-CC version because I am 68 years old and only do seminars and documentation video. Don't need so many bells and whistles, and definitely don't need learning curves every few weeks. CS6.0.3 works fine for me. By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that. Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December.
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door. If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that. So far it just happens with clips in my video that have RGB color correction.
Rick

CS6 Using RGB Color Corrector effect, Reference Monitor will not update?

When the current tine indicator is on a clip using RGB Color Corrector effect, the Reference window will not update.
And not only doesn't it update the data on the graph, but if you change the type of scope (Display Mode) (e.g. from RGB Parade to Vectorscope), that also doesn't change until you move the CTI to view a clip without the RGB Color Corrector effect on.
Anybody can help me to fix this problem, it is very important to me, many thanks!!!

Take a look here: http://help.adobe.com/en_US/premierepro/cs/using/WSCB566F37-A8BA-4b43-8BD2-B6467AAE930E.ht ml
Here the appropriate quotation from the help:
Gang the Reference Monitor and Program Monitor
You can gang the Reference Monitor and the Program Monitor so that both always monitor the same frame.
Do one of the following:
In the Reference Monitor, click the Gang To Program Monitor button .
In the Reference Monitor’s panel menu, choose Gang To Program Monitor.
In the Program Monitor’s panel menu, choose Gang To Reference Monitor.
Both Monitors show the same frame. Moving the playhead in either the Reference Monitor, the Program Monitor, or the Timeline will move the playheads in the other two to the same frame.
Regards
Axel

Error 0xBFF6001F when using Basler spL4096-70kc and PCIe-1435

Hi all,
I'm using a Basler spL4096-70kc camera and NI PCIe-1435 to acquire images. I cannot make a snap or a grab in MAX. It gave me "Error 0xBFF6001F: Cannot detect recognizable video source"
I don't know what is wrong now. I am using a National Instruments Power over Camera Link MDR to SDR Cable. I connected the Camera Link - Base on PCIe-1435 to the Camera Link - Base of the camera. I have only one cable, so there is not connected the Camera Link – Med/Full on PCIe-1435 to the Camera Link – medium/full of the camera
The camera is connected to 12vdc, and the LED on the back of the camera is orange and no flashing.
It's the first time to post a question. Thank you guys very much!

I would guess the default configuration requires the medium/full cable. You might be able to find a configuration that only requires one cable, but I don't know. If you do, use the serial communication to change the camera to the mode you need.
Bruce
Bruce Ammons
Ammons Engineering

RGB Color Corrector errors since update 6.0.2

Hey guys,
since i've updated Premiere Pro CS6 to version 6.0.2 yesterday, all projects in which i use the RGB Color Corrector have errors while rendering the work area. Rendering is not possible until i delete the effect. Same problem with new projects.
Are there any solutions? Do you have this problem too?
Patrick

Jim,
thanks for your input, but I have 7.5 hours of video that is ready to go out the door to a customer who is waiting. I don't use creative cloud because at 68 the last thing I want is a new learning curve every few weeks. I have a few years of learning and have been very successful producing video that is very good for my needs. I just want to have the product that I have been using for all this time, to work correctly. If the RBCC problem has been fixed in the CC version, then why is it not available to someone who has clients who depend on their work, but happen to be using the standalone version. I'm sure that the cc version is really good and there will always be new improvements, but for lectures and seminars, CS6.0 is great. I would just like to know who to contact at Adobe to get the fix for this. Someone said somethinhg about going back and using the 6.1 version, which maybe means a reinstall. I don't know when I updated to 6.3, but I'm not sure if it came with the disk upgrade I received late last year.
I was on hold on the Tech phone line for an hour, and gave up. Will try next week. So far, the only people at adobe who have made themselves available to actually help me are the people who sold the program to me.
If there is an update to fix this, why can I not get it. Do you have a number I can call at Adobe?
Sorry for the rant but Adobe leaves me feeling quite alone with a product that I have used, recommended, and had good luck with, util now when I have a problem.
Rick

CS6 BUG: Reference window and RGB Color Corrector

An interesting bug in Premiere Pro CS6.
It took me a while to work out what the common factor was, but it now seems to be the RGB Color Corrector effect.
When the current tine indicator is on a clip using this effect, the Reference window will not update.
And not only doesn't it update the data on the graph, but if you change the type of scope (Display Mode) (e.g. from RGB Parade to Vectorscope), that also doesn't change until you move the CTI to view a clip without the RGB Color Corrector effect on.
I have tested this with both Red R3D files as the source and image sequences. Same thing in both cases.
Extra info:
OS is Windows 7-64 bit

If anyone is still having trouble with this issue, here is a link to download the 6.0 version of the RGB Color Corrector plug-in. Just grabbed it from an old install, and replaced the file in the Plugins folder and it worked perfectly.
https://drive.google.com/file/d/0B9ULtCJ4GoxhTndMX0MxdGZfVmc/edit?usp=sharing

Dreamweaver CC generates one of 3 error messages when using find and replace on Win 8.1 64 bit.

Dreamweaver CC generates one of 3 error messages when using find and replace is used more than twice in succession. "While executing onLoad in bc_afterSave.htm, the following JavaScript error(s) occurred: At line 188 of file C:\Program Files (x86)\Adobe|Adobe DreamweaverCC|Configuration|Shared|BC\JS\bc_sites.js": out of memory"
or
While executing runCommand in File_Save.htm, a JavaScript erroroccurred.
or
While exciting getDynamicContent inAdressURL.htm, a Javascript erroroccirred.
Any thoughts - I end up closing DWCC and reopening. Will work for two additional Find and Replace before the error messaged\s popup again.

bkaufman43 wrote:
Thanks Jon. I tried all of those solutions before posting. Same problem. It seems that the problem is tied to DWCC. Do not have the problem when using DW6 on Win8.1. When running DWCC on a Win7 pc, we get the same error message. When running DW6 on Win 7, f&c works fine. It seems to be a bug in DWCC. DWCC works flawlessly on our Macs.
The same steps apply to DWCC, you just need to choose the CC folders rather than the DWCS4-6 versions that the page talks about. The layout of CC's folders hasn't changed from the older versions which is why, I think, Adobe hasn't updated the troubleshooting page as of yet.
As Nancy mentions, a 38,500 page site is sort of ridiculously large for a static website, that could be part of the problem, but your response quoted above leads me to think you may have tried the troubleshooting steps in the wrong version of the program. Could you confirm that?

Licence error message when using automation software

Error message when using Rational Functional Tester 7.0.1.1
to record a Flex application. The message seemed to come from the
Flex application.
I can record a fiew step in the application, then I have the
message : "Licence are not present. Eith the trial version only
limited record are allowed". But, my license of my Rational
Functional Tester application is activated.
I am using a Flex builder 3 trial version and the trial is
not over.
Is there any problem to get the license in the File compiler
with "D:\apps\IBM\SDP70\FunctionalTester\bin\rft.swc"? That RFT
file is supposed to be included in the flex application once
compile

Does anyone know how to build with automation support in a
linux environment?
We simply run an ant script build and have the SDK installed.
We purchased Flex Builder Professional, but cannot install on Linux
(we don't want to use the alpha version).
Thanks for any pointers :)

Tonal Range Output not working in RGB Color Corrector Effect!

I am using a MacPro:
Processor 2 x 2.93 GHz 6-Core Intel Xeon
Memory 32 GB 1333 MHz DDR3 ECC
Graphics NVIDIA Quadro 4000 2048 MB
Serial Number H01231DQGWR
Software OS X 10.9.5 (13F34)
In RGB Color Corrector Effect I cannot get the Output option of Tonal Range to work!
I have tried it with various files/projects. I have restarted the computer. I have uninstalled Premiere and downloaded again.
Nothing I have tried has made it work.

Neither can I.
Please file a Bug report
On windows its working like expected.

How to get RGB color corrector back working with YC waveform monitor

so, as many of you are probably aware, Adobe's latest update killed the RGB color corrector, at least in terms of using it with the YC waveform monitor.
In this thread ( http://forums.adobe.com/message/4825916#4825916 )
someone says-
"Yes it's a Bug since the 6.0.2 Update. I replace the effect in the premiere plugin directory with the same from version 6.0.1 and it's working again"
how can I go about doing this?
I looked on another machine running premiere 6.0.0, but I am not seeing a plugin for RGB color corrector in C:\Program Files\Adobe\Adobe Premiere Pro CS6\Plug-ins\Common
and I don't know what "RGBColorCorrector.cubin" is in C:\Program Files\Adobe\Adobe Premiere Pro CS6\PTX\cubin11
bottom line is that I want the RBG CC back working with the YC waveform monitor again.

also, I saw that initially, but assumed it was only used by after effects, due to the AE in the name, and that windows classifies it as an "adobe after effects effect".

Is it possible to export png use RGB color mode

hi,guys.
I use the following code to export the png , now is it possible to export png use RGB color mode?
Or is it possible to set it when export it
var pngOpts = new ExportOptionsSaveForWeb;
                            pngOpts.format = SaveDocumentType.PNG;
                            pngOpts.PNG8 = false;
                            pngOpts.transparency = true;
                            pngOpts.interlaced = false;
                            pngOpts.quality = 80;
                doc.exportDocument(saveFile, ExportType.SAVEFORWEB, pngOpts);

I use the following and do get png24-files.
////// function to png //////
function savePNG (myDocument, docPath, basename, theSuffix) {
// weboptions;
var webOptions = new ExportOptionsSaveForWeb();
webOptions.format = SaveDocumentType.PNG;
webOptions.PNG8 = false;
webOptions.transparency = true;
webOptions.interlaced = 0;
webOptions.includeProfile = false;
webOptions.optimized = true;
myDocument.exportDocument(new File(docPath+"/"+basename+theSuffix+".png"), ExportType.SAVEFORWEB, webOptions);

Error message when using search

why do i keep getting an error message when using the "search" tabe in iTunes. This happend whe i upgraded t the latest version of itunes.

Well, I believe JHeadstart does not really have this functionality.
One way is use a Query Operator 'startsWith', but then you always query like LIKE '<entered search value>%'
This is probably not what you want...
But you could hack it into advancedSearch in YourApplicationModuleImpl
try {
if (viewCriterium.getQueryValue() != null) { //This is where exception JHS-00116 is raised...
value = viewCriterium.getQueryValue().toString();
} else {
value = null;
catch (NumberFormatException ex) {
//insert check for wildcard
value = viewCriterium.getValue().toString();
if (value.indexOf('%')>=0) {
sLog.debug("Ja, een wildcard!!!");
operator = "LIKE";
} else {//original exceptionhandling code here...
...and a bit later, add test for "LIKE":
if (viewCriterium.isDate() || viewCriterium.isString() || "LIKE".equals(operator)) {
value = "'" + value + "'";
very nasty code, and does not raise an exception for searches like '%xxx'
Good luck,
HJH
Edited by: HJHorst on Mar 5, 2009 12:03 AM

Error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'.

I'm continually getting an error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'. The message being 'Table BAPIADTEL entry to be changed not found in target system'.
I have looked up this message but all links seem to refer to FM 'BAPI_BUPA_CENTRAL_CHANGE', which I'm not using, and has different parameter settings.
I'm simply trying to update the telephone number and I'm updating strcuture BAPIADTEL and BAPIADTELX but still the message appears. I know that there is a really simple reason for this, but I have been double-checking everything and experimenting with lots of different areas, but with no effect.
Has anyone encountered this problem using the specific FM ''BAPI_BUPA_ADDRESS_CHANGE' ?.
Jason

Hi Jason,
In case your database tables had already value for field telephone number, then only the flag should be "U".
If the telephone number field was empty, and we will try to change it by using the flag as U, it wont work. In this case, we should be using "I".
I even wrote that before in this post, but somehow I guess the post was locked, and a lot of comments from you and me were not visible apart from the first two. So, I couldnt get any update from you.
Anyway, its good that its working for you. Thank you for the update.
Regards,
Susanta

Adobe Air error message when using PSE 10

When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7

Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070. This is the install log.
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
Native installation package creation succeeded
Starting silent combined runtime update and app install.
Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Unpackaging complete
Download success
Runtime updated downloaded
User has selected immediate install of the update
Starting runtime background update installation
Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
Runtime updater successfully launched
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -update
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_704_0 -ei
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Clearing unused background update directory
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Runtime Installer end with exit code 6
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4784_0 -ei
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_3840_0 -eu
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_764_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_5396_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
Received download status 200
Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download success
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
Native installation package creation succeeded
Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Relaunching with elevation
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
Application Installer end with exit code 0
Date: Thu, 12 Apr 2012 17:10:46 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air error message when using PSE 10
    Re: Adobe Air error message when using PSE 10
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties. Please feel free to respond to this thread if you have any questions about the steps listed within the document. If you could also respond with the specific error message you receive it would be appreciated.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My Application gets Error 37 when using Serial Port VIs.

My Application works fine developed with LV 6.1. Then I updated to LV 7.1 and now the Executable of my application gets error 37 when using the old serial port functions. The "serpdrv" file is located in the application directory and is from 02/2002. The application runs well in the development environment after I placed the "serpdrv" file in the LabView directory. I tried to put a line with "serialDevices=..." in the .ini-file of my application but this did not cause an improvement. I also tried to rebuild the EXE with this line in the "labview.ini" file but nothing changes.
Does anybody have another idea ?
Many thanks for help
Thomas

>Did you actually replace the old serial functions that come with 7.1 with the functions from 6.1?
Yes. E.g. "open serial driver.vi" uses "open device" with "serpdrv" as device string.
I had the same problem running my application as VI´s. After the copy of serpdrv into the LV 7.1 directory everything works fine.
I don´t understand why the application running as a .exe doesn´t find the serpdrv when it is in the same directory....
Nevertheless many thanks for your answer
Thomas

Error Compiling when using RGB Color Corrector and Unsharp Mask

Similar Messages

Maybe you are looking for