Error conecting to FTP Server

Hi!
I keep getting an error message when I try to publish my site. It says it can't connect to the ftp server. All my settings are correct.
Thanks for any help!

Are you using the iWeb FTP or another application?

Similar Messages

Error connecting to ftp server

Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
Naveen

HI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh

Error files at ftp server

Hi,
In the Idoc to File scenario,error file are also generated at ftp server which are just the prototypes of the idoc sent.How can I stop this error file generation??
Thanks,
Ratna

<i>18:27>>FOUND: XML. Calling XML parser
18:27>>Looking up FILENAME: PA, IDOCTYP: DELVRY03, MESTYP: DESADV 18:27>>NO APRF FOUND!
18:27>>ERROR: ERROR: XML lookup not found ERROR: XML lookup not found
18:27>>ERROR: Renaming remote file: PA20071104-192623-151.xml
18:27>>ERROR: To remote file: PA20071104-192623-151.xml.ERROR
---> RNFR PA20071104-192623-151.xml
350 File exists, ready for destination name
---> RNTO PA20071104-192623-151.xml.ERROR</i>
>>>
are you using the File adapter ?
In that case please confirm the following;
1. Is any adapter module attached to the file adapter ? (check the modules tab in the adapter)
2. Also confirm the parameters used in the adapter.

Error communicating with FTP server....

Hey everyone,
I registered a domain through GoDaddy.com two days ago, but only finally settled down with a host yesterday (Monday). My free host is byethost.com. After signing up for a host, adding my domain, and changing the domain's DNS's, I am aware that there is a period of time for "propagation." Using iWeb 09, I have been trying to upload my site via ftp (obviously), using the settings and information Byethost has given me. However, iWeb always comes back saying that there was an error in communication. Do I need to wait until the DNS propagation is completely done (as it is not at the time of this post)? Or, is there something I am missing? Thank you for your help and I'll be glad to send along any info necessary!
BTW: The "Test Connection" button works perfectly and says I can upload. hmmm...nope
Jordan

You should be able to upload your files as this has nothing to do with the domain name.
The iWeb FTP is not exactly the world's best!
Try downloading the freeware Cyberduck if you don't have an FTP application.
http://www.iwebformusicians.com/SearchEngines/Upload.html

Error during disconnect from FTP Server

Hi Everyone,
Here's my problem:
XI has stopped picking the messages from the repository of one of servers. Though, we have checked the XI system and can find no problems from the infrastructure side. The adapters also show no errors and the communication channels show no errors.
We have also checked the log viewer in XI and found the following entry:
"Error during disconnect from frtp server ABC, ignored: com.sap.xxx.adapter.file.ftp.XXXXXX: 421 Terminating Connection."
This FTP error relates to what we FTP server says, "421 service not available, remote server has closed connection."
We looked at the server side, the server is working fine.
What do you think is the error? And do we resolve this one? I'm really clueless about this..Im thinking of just restarting the J2EE engine...
Thanks,
Grace

Mary,
This question would be more relevant to the Xi forum... but on googling the error code..
http://help.globalscape.com/help/support/Error_Codes/FTP_Codes.htm
Error 421 Service not available, closing control connection.
Error 421 User limit reached
Error 421 You are not authorized to make the connection
Error 421 Max connections reached
Error 421 Max connections exceeded
Possible Solutions:
You may receive a 421 error if the FTP server you are connected to limits the total number of connections available or limits the connections available to one user. There are three things you can do:
1. Limit the number of connections to any one FTP site by selecting Tools > Global Options > Connection and set "Per site max connections / transfers" to 1 (By default it will be set to 2).
2. Remove items from the Transfer Queue. The Transfer Queue is where you see items ready for transfer, in transit, or just transferred. Sometimes the Queue Pane can become cluttered with unfinished transfers. To clear the queue, right-click inside it and choose Remove All.
Also try using an FTP manager like cuteFTP or something of that sort to see if you can open the connection - it could be related to the FTP settings...
Arun
Hope it helps....

XI Adapter FTPS to a CUTE FTP server

We have a problem during the connection to a CUTE FTP server in FTPS mode in a Passive connection. The port on firewall are correctly opened.
We have the messages from log
Error during disconnect from ftp server test.car-pass.be, ignored: com.sap.aii.adapter.file.ftp.FTPEx: 331 Password required for t403425770.
Channel CC0002_S_File_CarMetricError: Error connecting to ftp server 'test.car-pass.be': com.sap.aii.adapter.file.ftp.FTPEx: The control connection to the FTP server test.car-pass.be timed out while reading the server reply.
We have the same problem in case of sender and receiver channel
The problem is we have is sometimes, the connection works sometimes we receive this message.
When it works, all the process is right.
Is there anybody who heard about this ?

Hi,
Check
FAQ: XI 3.0 / PI 7.0 File Adapter
Note No: 821267
Regards,
Sudharshan

Error when scheduling WEBI report to FTP server

Hi
We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
Any help would be appreciated
Regards,
Anisa

Hi All,
I want a run my report once by scheduling, so i provide a time interval for scheduling a report
start date/ time : 11:38:AM 10/30/2011
end date/time : 11:43:AM 10/30/2011
after completion of end time....report is failed and fetching an error
Error : Object could not be scheduled within the specified time Interval
Any solution for resolving this error

404 error when publishing to FTP server.

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server.

Error when importing csv file onto ftp server database

Hi all, i have a csv fiile that has to be imported to a ftp
server database. The code works when i am trying out the
application on localhost, and the data in the file is successfully
uploaded and sent in the database. however, this becomes an issue
on when my files are launched on the ftp server.
I get this following error:
SQL ERROR:Access denied for user 'istaff'@'%' (using
password: YES)
does anyone know what this means?
I'm attaching my code here, perhaps it might help. Thanks!!

taywanqi wrote:
> I get this following error:
> SQL ERROR:Access denied for user 'istaff'@'%' (using
password: YES)
>
> does anyone know what this means?
It means access denied...
> <?php require_once('staffSql.php');
> ?>
Check this file, make sure you have the correct username and
password
set for your database.
Dooza

Error occured while connecting to FTP Server...

Hi,
I am trying to use the file adapter to pick the file from FTP server however file adapter raised the following error:
Error occurred while connecting to the FTP server \"64.72.230.42:21\": java.net.ConnectException: Connection timed out: connect
I changed the timeout of the communication channel to 1200 but still getting this error after a minute.
The ftp server is working fine with my ftp client.
Could you please help me to fix this issue ?

I got the following message
"Processing finished successfully" when the ftp folder did not have the required file.
Do you mean, the connection is ok when there is no file in the source directory.
Yes.
However as soon as i put the file start getting the same error message.
This could be then an authorization issue. Check if your source dir & file are having proper authorizations. Check with your BASIS guy.
I set the source directory to a folder name which does not exit on ftp server. now i am getting "The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /user038888888888888888/input: The system cannot find the path specified:"
So, do you think it is a problem of authorizations ? and if it is then how can i change it ? should i have to change the permissions of the folder on ftp server?
Thanks for your support. I really appreciate your help. I almost spend a whole day trying to fix this issue.
Regards,
Ehsaan.

Connection refused Error while writing file to FTP server.

Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.

Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location.

FTP Adapter File Polling does not raise error when FTP server is down

Hi All,
Thanks in advance.
I am polling for new files in a FTP Server. However, if the server is down there is no way for me to catch the fault to notify someone. I am using fault-policies but that never gets triggered when polling an unavailable FTP Server.
One option is to have a completely separate scheduled process (SOA or not) that tries to connect to the servers but I am trying not to go that route just to keep things manageable and within the realm of the process.
I am sure that I am not the only one polling for new files in a FTP Server, so I thought to pick your brain to tackle this scenario.
Thanks for taking the time to read this.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

Error time out to connect FTP server

Hi Experts,
I am getting the error in receiver communication channel (FTP) as :
An error occurred while connecting to the FTP server ''. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: The control connection to the FTP server "" timed out while reading the server reply.'. For details, contact your FTP server vendor.
Getting this error for a particular interface. Changed the time out parameter but not working.
the same IP address is used for same receiver but different interface and it is in green status.
tried to restart the adapter but same time out error.
Same configuation is done for two receiver channels .. but getting above error for a particular interface.Please help.
Thanks,
Swapnashree

Hi Swapna,
If you are facing problem with only one interface then you make some dummy changes in configuration(ID) to that perticular channel and activate.
After doing this you just restart your communication channel and check if you have any luck.....
Also check if you have permissions ......for the user and folder which you are accing in your channel...
Naveen.

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Error conecting to FTP Server

Similar Messages

Maybe you are looking for