Error: coniguracion incompleta verifique la configuracion de red (0 x 121A)

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

    Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)

    Hi, William
    My question is if you can help me and support me to configure the Blink Pro App, I have a Mac Book Air, OS X 10.9.1.
    hope for your answer

  • I have an EX495 WHS and I get an Error Code. 1 aqua and 4 red : Recovery Mode Failure.

    Hi,
    I have an MediaSmart Server EX495 WHS and I get an Error Code. 1 aqua and 4 red : Recovery Mode Failure.  I tried Server recovery to no avail. This all started when I lost connection to the Server via Control Panel - it stopped connecting to the network totally.
    Can anyone help?
    Thanks in advance, John

    I had the same problem and am now in a worse situation. Saw your posting and hoped someone would have advised what to do. When I re-boot my EX495, the Health indicator light comes up red. Pressing the status/recovery button causes the Health light to flash 1 Blue, 4 Red:  Recovery Mode Failure. User manual says contact HP. HP says I'm out of warranty. Does anyone out there have a suggestion what I can do/try? Is it worth paying HP for tech support on the issue?

  • CIF ERROR ;Address incomplete; enter country

    Hi Experts
    when im trying to cif Material or customer  im getting below error
    CIF ERROR ;Address incomplete; enter country
    Please suggest ?
    Thanks in advance

    Hi,
    As was mentioned by the expert this is not an error related to the material master. Something that you have in the addess in your customer is missing in APO.
    First try to identify what is the customer that is generating the issue. Then check the customer in ECC and review your customizing in APO and ensure you have the country codes and Regions maintained in APO.
    SPRO --> SAP NetWeaver --> General Settings --> Set Countries: 
    --> Insert Regions
    --> Define Country Codes
    Kind Regards,
    Mariano

  • B590 / Wie kann ich das Bios Fashen? Error 234 - SecureFlash verification fail

    Hallo Community, habe nun mehrmals versucht das Bios H9ET90WW für mein B590 zu Flashen. Dazu habe ich das BIOS Update Utility :http://support.lenovo.com/de/de/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b590-notebook/downloads/DS032260 geladen. Dieses entpackt sich selbst, und führt dann die WinFlash64.bat selbstständig aus. Die Installation bricht dann aber mit dem Fehler "Error 234 - SecureFlash verification fail" ab. Selbiges geschieht über die Manuelle Installation peer CMD (Adminestrator).Bios Flash steht im Bios auf Enabled. Im Englischen Forum haben mehrer User das selbe Problemhttps://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/lenovo-B590-BIOS-H9ET90WW-ERROR-234-SecureFlash-verification/td-p/2091667 Dort hat sich nicht einmal ein Mod, oder jemand vom Support dazu geäußert. Wie bekomme ich nun dieses Bios Installiert? 

    Hallo MP77,
    welchen Maschinentyp besitzt du vom B590? (Sollte unter Type unterhalb des Notebooks zu finden sein)

  • Lenovo B590 BIOS H9ET90WW ERROR 234 - SecureFlash verification fail!

    Hi there, I've been trying to update my BIOS from version H5ET69WW (the one the laptop came with) to version H9ET90WW , but I' getting error message " ERROR 234 - SecureFlash verification fail! ". I have tried to download the archive several times, to make sure there was no corruption with the download. Any ideas please? Thanks!!! C:\SWTOOLS\FLASH\H9ET90WW>winflash64.batC:\SWTOOLS\FLASH\H9ET90WW>WinFlash64 /file H9ET90WW.cap /silent /bbl /sd /sn /cvar /shutdownPhoenix SCT Flash for Windows V2.6.2.0, Build 140613
    Copyright (c) 2011-2014 Phoenix Technologies Ltd.The tool will start flashing in 5 seconds, press ESC to abort.
    SecureFlash BIOS detected.
    Read BIOS image from file.
    Initialize Flash module.
    Read current BIOS.
    Write capsule file to capsule memory.ERROR 234 - SecureFlash verification fail!C:\SWTOOLS\FLASH\H9ET90WW>IOPort64.exe byte 66 52
    Outport 0x66 ==> 0x0052   SuccessC:\SWTOOLS\FLASH\H9ET90WW>IOPort64.exe byte 66 53
    Outport 0x66 ==> 0x0053   SuccessC:\SWTOOLS\FLASH\H9ET90WW>

    Same with my Lenovo b490!
    Besides, there's no key combination that allows me to get in bios.
    https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/b490-BIOS-ONLY-ACCESSIBLE-IN-UEFI/m-p/2047196The only way I can do it is unplugging the CMOS battery cable.
    Very frustrating,
    Lenovo makes good hardware but lacks in support, sad.

  • Recovery disk creation error while disk verification in HP PAVILION Ts-15N015Tx Split Notebook pc

    Recovery media creation using DVDs failed at verification Process.
    Please help I haave tried various DVDs but always the error occurs at veification process.
    I even tried creating recovery disk in safe mode in windows 8 but the message PLEASE INSTALL BATTERIES is displayed.
    Please help..
    thanks in advance

    Contact HP Support in your country /region and report the issues you are having. Usually they will send Recovery Media free if the process fails and you are still under warranty. Worldwide contact info can be accessed here >>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Convert Pricing Error : Mandatory condition PR00 missing as a red error

    HI GURUS,
    May I know if I can make the error "Pricing error : Mandatory condition PR00 missing" as a no-go red error?  We would not want to be able to save the sales order, then create the outbound delivery and only to reverse them after not being able to post the outbound delivery.  Making it a no-go error will help us save time and effort if we commit mistakes in the sales order encoding.
    Thanks a lot for your prompt reply.
    Regrds,
    Frances

    Hi
    Rahul
    The error is becose of two reason
    1. Check have u entered plant or not? If yes then
    2. Mintain PR00 condition thr. Tcode VK11 and do the update pricing.
    This two are the possibilities please check and try.
    Hope this will help you.
    Thx.

  • Error: "FATAL: Module oracleasm not found" in Red Hat 6

    Hi all:
       OS.....: Red Hat 6.5 (64 bits)
       I am preparing to install an 12c RAC in a Red Hat 6.5. While configuring the ASMLib, i got the following error while executing "/usr/sbin/oracleasm init":
          May  2 18:23:20 oraprd01 modprobe: FATAL: Module oracleasm not found.
       I configure the Oracle YUM Repository and installed the "kmod-oracleasm" package. And in the link (Oracle ASMLib Downloads for Red Hat Enterprise Linux Server 6) i got the "oracleasmlib" and "oracleasm-support" packages, as you can see below:
          [root@oraprd01 binarios]# rpm -qa | grep -i oracleasm
          kmod-oracleasm-2.0.8-4.el6_6.x86_64
          oracleasm-support-2.1.8-1.el6.x86_64
          oracleasmlib-2.0.4-1.el6.x86_64
       My kernel is:
          Linux oraprd01 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
       My Red Hat version is:
          [root@oraprd01 binarios]# cat /etc/redhat-release
          Red Hat Enterprise Linux Server release 6.5 (Santiago)
       Why am i getting the above error while trying to init the oracleasm module? What am i doing wrong?
       Thanks in advance.

    Problem solved.
       I installed an older version of the kmod-oracleasm (kmod-oracleasm-2.0.6.rh1-3.el6_5.x86_64) downloaded from Red-Hat Customer Portal. Now the ASM module is loaded.

  • Connection object - error message : Incomplete address; enter country

    Dear experts,
    I want to to create a Connection Object in the Web IC.
    I enter the address information (with the country) then save.
    The following error message is displayed : "Incomplete address; enter country"
    Has anybody already encountered this problem?
    Do you have any idea how we could solve this?
    Thanks a lot for your help.
    Regards,
    Pascale

    Hi,
    Have you resolved it?
    Regards,
    Vamshi.

  • Workflow error when sending Verification Letter request by mail

    in ESS Portal, when trying to send the employment verification letter by mail I get a workflow error in ECC. Error occurs in workflow template WS01000045 (Employment and Salary Verification) task TS00408262 (PF: Find basic pay). The employee submitting the verification letter request is an active employee, has infotype 105 data in the system, and has basic pay data in the system.
    workflow log (SWI1) shows the "Basic Pay" object available and when double clicking on the object, it brings me to PA20 where I can see the Basic Pay infotype with correct data.
    Can someone help?
    note: the employee is Canadian, in case this matters.
    Tiberiu

    Once you are satisfied that the origin is satisfactory it is best to select the option worded something like - always accept from this site.
    In my experience it is always more reliable to use the SMTP server which matches your From name. The one exception is running your own SMTP server on a fixed IP.
    Check that your Mail SMTP settings have the correct, name, password, security and port.

  • Installation Error with 10.1.3.1 on Red Hat Linux 4

    Hi,
    I am installing Oracle Application Server 10.1.3.1 on Red Hat Linux 4, and am receiving the following error:
    Error in invoking target install of make file ins_sqlplus.mk. If I hit 'Ignore', I continue to receive errors regarding the makefile, and the configuration assistants fail.
    What do I need to do to avoid getting this error? I am having a lot of trouble getting this installation to work successfully.
    Thanks in advance for the help,
    Nora

    Hi Nora,
    Just read pre-install steps well. I think you 're missing a couple of libraries at your OS.
    So the only thing as I mentioned check pre-install steps or download pre-install script for AS9.0.4
    https://metalink.oracle.com/metalink/plsql/f?p=130:14:4077412560366893878::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,270683.1,1,1,1,helvetica
    The output will help you to determine what you are missing.
    one more thing check your ENV & swap
    Hear from you & regards,
    Hamdy

  • Pricing error: Document Incomplete: While creating sales order

    Hello,
    When I create a sales order, the order always remain incomplete due to pricing data incomplete.
    There is a manual condition type as a discount.
    ZDIS     Manual Discount %     
    In which even if I put some data, it takes the data but the error remains the same.
    Is there some other reason behind this error.
    Please advice.
    Thanks and rgds,
    Anand

    Hi Anand,
    Check Whether you have assigned this Condition type in your Pricing Procedure.
    Check whether you have assigned an Accounting Key for the Condition type ZDIS in your Pricing Procedure.
    Goto VKOA where you can see list of tables. By selecting the General 4th Table ensure that the combination of Application - V, Condition Type - KOFK and the respective G/L account is assigned
    The Condition type KOFK in VKOA is a Condition type for Controlling .
    I think this will solve your problem.
    Revert back if you have any doubts.
    Reward if helpful.
    Regards
    PAVAN.

  • Errors when installing SGD 4.5 on Red Hat Enterprise 5

    I have a customer installing SGD 4.5 on Red Hat Enterprise 5 and is getting the following errors:
    /opt/tarantella/bin/tarantella: /opt/tarantella/bin/bin/ttahostname: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
    The customer has indicated that they do not have a lib directory?
    Any ideas would be greatly appreciated !
    Thanks
    Jeff Holland

    Hi.
    Never tried under RH5 but, to me, it's pretty strange the customer does not have a /lib folder.
    Are you in the position to check if their RH5 system is correctly configured (ie, not screwed up)?
    Is that a 32bit or 64bit edition?
    Could you manually "inspect" the /lib folder to see if there's some contents on it?
    Last, under which user account is the customer installing SSGD? Is it operating as root user?
    As per the Web site, RH5 is a supported platform so you shouldn't have any problems.
    Cheers,
    Rob

Maybe you are looking for